- 11 May, 2016 15 commits
-
-
Aneesh Kumar K.V authored
Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This patch switches 4K Linux page size config to use pte_t * type instead of struct page * for pgtable_t. This simplifies the code a lot and helps in consolidating both 64K and 4K page allocator routines. The changes should not have any impact, because we already store physical address in the upper level page table tree and that implies we already do struct page * to physical address conversion. One change to note here is we move the pgtable_page_dtor() call for nohash to pte_fragment_free_mm(). The nohash related change is due to the related changes in pgtable_64.c. Signed-off-by:
-
Aneesh Kumar K.V authored
Only code cleanup. No functionality change. Signed-off-by:
-
Aneesh Kumar K.V authored
Simplify the code by dropping 4-level page table #ifdef. We are always 4-level now. Signed-off-by:
-
Aneesh Kumar K.V authored
This reverts pgalloc related changes WRT implementing 4-level page table for 64K Linux page size and storing of physical address in higher level page tables since they are only applicable to book3s64 variant and we now have a separate copy for book3s64. This helps to keep these headers simpler. Cc: Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Aneesh Kumar K.V authored
This moves the nohash variant of pgalloc headers to nohash/ directory Signed-off-by:
-
Aneesh Kumar K.V authored
This patch start to make a book3s variant for pgalloc headers. We have multiple book3s specific changes such as: * 4 level page table * store physical address in higher level table * use pte_t * for pgtable_t Having a book3s64 specific variant helps to keep code simpler and remove lots of #ifdef around code. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
Hash needs special get_unmapped_area() handling because of limitations around base page size, so we have to set HAVE_ARCH_UNMAPPED_AREA. With radix we don't have such restrictions, so we could use the generic code. But because we've set HAVE_ARCH_UNMAPPED_AREA (for hash), we have to re-implement the same logic as the generic code. Signed-off-by:
-
Aneesh Kumar K.V authored
On return from RTAS we access the paca variables and we have 64 bit disabled. This requires us to limit paca in 32 bit range. Fix this by setting ppc64_rma_size to first_memblock_size/1G range. Signed-off-by:
-
Aneesh Kumar K.V authored
Radix doesn't need slice support. Catch incorrect usage of slice code when radix is enabled. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
We also use MMU_FTR_RADIX to branch out from code path specific to hash. No functionality change. Signed-off-by:
-
Aneesh Kumar K.V authored
We are going to add asm changes in the follow up patches. Add the feature bit now so that we can get it all build. mpe: When CONFIG_PPC_RADIX_MMU=n we omit MMU_FTR_RADIX from the MMU_FTRS_POSSIBLE mask. This allows the compiler to work out that those checks will always be false and so the code can be elided completely. Note we do *not* define MMU_FTR_RADIX to 0 in the RADIX_MMU=n case, because that doesn't work with the ASM_FTR patching. In particular an IF_SET section will result in a mask and value of zero, which is always true, meaning the section *won't* be patched, which is the opposite of what we want. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Michael Ellerman authored
Follow the example of the cpu feature code, and add a mask of possible MMU features, MMU_FTRS_POSSIBLE. This is used in mmu_has_feature(), which allows the possible mask to act as a shortcut for any features that are not possible, but still allows the feature bit itself to be defined. We will use this in the next commit to allow MMU_FTR_RADIX checks to be elided when MMU_FTR_RADIX is not possible. Signed-off-by:
-
- 01 May, 2016 25 commits
-
-
Aneesh Kumar K.V authored
Core kernel doesn't track the page size of the VA range that we are invalidating. Hence we end up flushing TLB for the entire mm here. Later patches will improve this. We also don't flush page walk cache separetly instead use RIC=2 when flushing TLB, because we do a MMU gather flush after freeing page table. MMU_NO_CONTEXT is updated for hash. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
This file now contains both hash and radix specific code. Rename it to indicate this better. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
How we switch MMU context differs between hash and radix. For hash we need to switch the SLB details and for radix we need to switch the PID SPR. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
For hash we create vmemmap mapping using bolted hash page table entries. For radix we fill the radix page table. The next patch will add the radix details for creating vmemmap mappings. Signed-off-by:
-
Aneesh Kumar K.V authored
This adds routines for early setup for radix. We use device tree property "ibm,processor-radix-AP-encodings" to find supported page sizes. If we don't find the above we consider 64K and 4K as supported page sizes. We do map vmemap using 2M page size if we can. The linear mapping is done such that we use required page size for that range. For example memory of 3.5G is mapped such that we use 1G mapping till 3G range and use 2M mapping for the rest. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
This only does 64K Linux page support for now. 64K hash Linux config THP needs to differentiate it from hugetlb huge page because with THP we need to track hash pte slot information with respect to each subpage. This is not needed with hugetlb hugepage, because we don't do MPSS with hugetlb. Radix doesn't have any such restrictions. Signed-off-by:
-
Aneesh Kumar K.V authored
Here we create pgtable-64/4k.h and move pmd accessors that are common between hash and radix there. We can't do much sharing with 4K Linux page size because 4K Linux page size with hash config doesn't support THP. So for now it is empty. In later patches we will add functions that does conditional hash/radix accessors there. Signed-off-by:
-
Aneesh Kumar K.V authored
For those pte accessors, that operate on a different set of pte bits between hash/radix, we add a generic variant that does a conditional to hash linux or radix variant. Signed-off-by:
-
Aneesh Kumar K.V authored
In this patch we add the radix Kconfig and conditional check. radix_enabled() is written to always return 0 here. Once we have all needed radix changes added, we will update this to an mmu_feature check. We need to add this early so that we can get it all build in the early stage. Signed-off-by:
-
Aneesh Kumar K.V authored
This adds Power ISA 3.0 specific pte defines. We share most of the details with hash Linux page table format. This patch indicates only things where we differ. Signed-off-by:
-
Aneesh Kumar K.V authored
Only code movement. No functionality change. Signed-off-by:
-
Aneesh Kumar K.V authored
Now that the page table size is a variable, we can move these to generic pgtable.h. Signed-off-by:
-
Aneesh Kumar K.V authored
Radix and hash MMU models support different page table sizes. Make the #defines a variable so that existing code can work with variable sizes. Slice related code is only used by hash, so use hash constants there. We will replicate some of the boundary conditions with resepct to TASK_SIZE using radix values too. Right now we do boundary condition check using hash constants. Swapper pgdir size is initialized in asm code. We select the max pgd size to keep it simple. For now we select hash pgdir. When adding radix we will switch that to radix pgdir which is 64K. BUILD_BUG_ON check which is removed is already done in hugepage_init() using MAYBE_BUILD_BUG_ON(). Signed-off-by:
-
Aneesh Kumar K.V authored
These pte functions will remain the same between radix and hash. Move them to pgtable.h. Signed-off-by:
-
Aneesh Kumar K.V authored
Now that we have moved book3s hash64 Linux pte bits to match Power ISA 3.0 radix pte bit positions, we move the matching pte bits to a common header. Only code movement in this patch. No functionality change. Signed-off-by:
-
Aneesh Kumar K.V authored
I am splitting this as a separate patch to get better review. If ok we should merge this with previous patch. Signed-off-by:
-
Aneesh Kumar K.V authored
This helps to make following hash only pte bits easier. We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it is in this patch eventhough they use hash specific bits. Using them in radix as it is should be ok, because with radix we expect those bit positions to be zero. Only renames in this patch, no change in functionality. Signed-off-by:
-
Aneesh Kumar K.V authored
This patch reduces the number of #ifdefs in C code and will also help in adding radix changes later. Only code movement in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
PowerISA 3.0 adds a parition table indexed by LPID. Parition table allows us to specify the MMU model that will be used for guest and host translation. This patch adds support with SLB based hash model (UPRT = 0). What is required with this model is to support the new hash page table entry format and also setup partition table such that we use hash table for address translation. We don't have segment table support yet. In order to make sure we don't load KVM module on Power9 (since we don't have kvm support yet) this patch also disables KVM on Power9. Signed-off-by:
-
Aneesh Kumar K.V authored
Add structs and #defines related to the radix MMU partition table format. We also add a ppc_md callback for updating a partition table entry. Signed-off-by:
-
Aneesh Kumar K.V authored
Start moving code that is generic between radix and hash to book3s64 specific headers from the book3s64 hash specific one. Signed-off-by:
-
