This commit uses TREE RCU's rnp->lock wrappers to replace a few explicit
memory barriers.  This change also has the advantage of making SRCU's
memory-ordering properties be implemented in roughly the same way as they
are in Tree RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit moves the now-generic rnp->lock wrapper macros from
kernel/rcu/tree.h to kernel/rcu/rcu.h, thus allowing SRCU to use them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Use of smp_mb__after_unlock_lock() would allow SRCU to omit a full
memory barrier during callback execution, so this commit converts
raw_spin_lock_rcu_node() from inline functions to type-generic macros
to allow them to handle locks in srcu_node structures as well as
rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The list of #includes from include/linux/rcupdate.h has grown quite
a bit, so it is time to trim it.  This commit moves the #include
of include/linux/ktime.h to include/linux/rcutiny.h, along with the
Tiny-RCU-only function that was the only thing needing ktimem.h.  It then
reconstructs the files included into include/linux/ktime.h based on what
is actually needed, with significant help from the 0day Test Robot.

This single change reduces the .i file footprint from rcupdate.h from
9018 lines to 7101 lines.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Commit 0bc2d534708b ("rcu: Refactor #includes from include/linux/rcupdate.h")
caused a build regression in an MTD partition driver:

In file included from drivers/mtd/bcm47xxpart.c:12:0:
include/linux/bcm47xx_nvram.h: In function 'bcm47xx_nvram_init_from_mem':
include/linux/bcm47xx_nvram.h:27:10: error: 'ENOTSUPP' undeclared (first use in this function)

The rcupdate.h file has no particular need for linux/errno.h, so this
commit includes linux/errno.h into bcm47xx_nvram.h.

Fixes: 0bc2d534708b ("rcu: Refactor #includes from include/linux/rcupdate.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Commit a5dd63ef ("lockdep: Use "WARNING" tag on lockdep splats")
substituted pr_warn() for printk() in places called out by Dmitry Vyukov.
However, this resulted in an ugly mix of pr_warn() and printk().  This
commit therefore changes printk() to pr_warn() or pr_cont(), depending
on the absence or presence of KERN_CONT.  This is done in all functions
that had printk() changed to pr_warn() by the aforementioned commit.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_segcblist structure provides quite a bit of functionality, and
Tiny SRCU needs almost none of it.  So this commit replaces Tiny SRCU's
uses of rcu_segcblist with a simple singly linked list with tail pointer.
This change significantly reduces Tiny SRCU's memory footprint, more
than making up for the growth caused by the creation of rcu_segcblist.c
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The call_srcu() docbook entry is currently in include/linux/srcu.h,
which causes needless processing for each include point.  This commit
therefore moves this entry to kernel/rcu/srcutree.c, which the compiler
reads only once.  In addition, the srcu_batches_completed() function is
used only within RCU and its torture-test suites.  This commit therefore
also moves this function's declaration from include/linux/srcutiny.h,
include/linux/srcutree.h, and include/linux/srcuclassic.h to
kernel/rcu/rcu.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

If a given CPU never happens to ever start an SRCU grace period, the
grace-period sequence counter might wrap.  If this CPU were to decide to
finally start a grace period, the state of its sdp->srcu_gp_seq_needed
might make it appear that it has already requested this grace period,
which would prevent starting the grace period.  If no other CPU ever started
a grace period again, this would look like a grace-period hang.  Even
if some other CPU took pity and started the needed grace period, the
leaf rcu_node structure's ->srcu_data_have_cbs field won't have record
of the fact that this CPU has a callback pending, which would look like
a very localized grace-period hang.

This might seem very unlikely, but SRCU grace periods can take less than
a microsecond on small systems, which means that overflow can happen
in much less than an hour on a 32-bit embedded system.  And embedded
systems are especially likely to have long-term idle CPUs.  Therefore,
it makes sense to prevent this scenario from happening.

This commit therefore scans each srcu_data structure occasionally,
with frequency controlled by the srcutree.counter_wrap_check kernel
boot parameter.  This parameter can be set to something like 255
in order to exercise the counter-wrap-prevention code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit saves a few lines in include/linux/rcutiny.h by moving
to single-line definitions for empty functions, instead of the old
style where the two curly braces each get their own line.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_request_urgent_qs_task() function is used only within RCU,
so there is no point in exporting it to the rest of the kernel from
nclude/linux/rcutiny.h and include/linux/rcutree.h.  This commit therefore
moves this function to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The various functions similar to rcu_batches_started(), the
function show_rcu_gp_kthreads(), the various functions similar to
rcu_force_quiescent_state(), and the variables rcutorture_testseq and
rcutorture_vernum are used only within RCU.  There is therefore no point
in exporting them to the kernel at large from include/linux/rcutiny.h
and include/linux/rcutree.h.  This commit therefore moves all of these
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit saves a few lines in include/linux/rcupdate.h by moving
to single-line definitions for functions that just return either true
or false, instead of the old style where the two curly braces each get
their own line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_ftrace_dump() function is used only internally to RCU.  This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_is_nocb_cpu() function is used only internally to RCU.  This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The "__call_rcu(): Leaked duplicate callback" error message from
__call_rcu() has proven to be unhelpful.  This commit therefore changes
it to "__call_rcu(): Double-freed CB" and adds the value of the pointer
passed in.  The value of the pointer improves debuggability by allowing
correlation with tracing output, for example, the rcu:rcu_callback trace
event.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The include/linux/rcupdate.h file does not actually need anything from
linux/debugobjects.h, so this commit removes the inclusion.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The RCU_SCHEDULER_INACTIVE, RCU_SCHEDULER_INIT, and RCU_SCHEDULER_RUNNING
definitions are used only within RCU, so this commit moves them from
include/linux/rcupdate.h to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The __rcu_is_watching() function is currently not used, aside from
to implement the rcu_is_watching() function.  This commit therefore
eliminates __rcu_is_watching(), which has the beneficial side-effect
of shrinking include/linux/rcupdate.h a bit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit saves a few lines in include/linux/rcupdate.h by moving
to single-line definitions for empty functions, instead of the old
style where the two curly braces each get their own line.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The UINT_CMP_GE() and UINT_CMP_LT() macros are not used, so this
commit removes them.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The include/linux/rcupdate.h file contains a number of definitions that
are used only to communicate between rcutorture, rcuperf, and the RCU code
itself.  There is no point in having these definitions exposed globally
throughout the kernel, so this commit moves them to kernel/rcu/rcu.h.
This change has the added benefit of shrinking rcupdate.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_gp_is_normal(), rcu_gp_is_expedited(), rcu_expedite_gp(), and
rcu_unexpedite_gp() functions are intended only for use within the
RCU implementation itself -- the sysfs access is what should be used
outside of RCU.  This commit therefore moves the declarations for
these functions to kernel/rcu/rcu.h, and also includes this file into
kernel/rcu/rcutorture.c and kernel/rcu/rcuperf.c.  This also has the
beneficial effect of shrinking rcupdate.c a bit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_expedited and rcu_normal variables are used only by sysctl
and kernel/rcu/update.c, so it does not make sense to their extern
declarations in rcupdate.h.  This commit therefore moves these
extern declarations to update.c.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The include/linux/rcupdate.h file is included by more than 200
files, so shrinking it should provide some build-time benefits.
This commit therefore moves several docbook comments from rcupdate.h to
kernel/rcu/update.c, kernel/rcu/tree.c, and kernel/rcu/tree_plugin.h, thus
reducing the number of times that the compiler has to scan these comments.
This likely provides only a small benefit, but every little bit helps.

This commit also fixes a malformed bulleted list noted by the 0day
Test Robot.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcu_node_tree.h and rcu_segcblist.h header files in the include/linux
directory might appear at first sight to be internal to the RCU
implementation.  However, the definitions in these files are needed to
determine the size of TREE SRCU's srcu_struct structure, so they must
be externally visible, which is why they live in include/linux.

This commit adds comments to this effect to those files.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Wait/wakeup operations do not guarantee ordering on their own.  Instead,
either locking or memory barriers are required.  This commit therefore
adds memory barriers to wake_nocb_leader() and nocb_leader_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: <stable@vger.kernel.org> # 4.6.x

The RCU_NOGP_WAKE_NOT, RCU_NOGP_WAKE, and RCU_NOGP_WAKE_FORCE flags
are used to mediate wakeups for the no-CBs CPU kthreads.  The "NOGP"
really doesn't make any sense, so this commit does s/NOGP/NOCB/.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The synchronize_rcu_mult() function now detects duplicate requests
for the same grace-period flavor and waits only once for each flavor.
This commit therefore removes the ugly #ifdef from sched_cpu_deactivate()
because synchronize_rcu_mult(call_rcu, call_rcu_sched) now does what
the #ifdef used to be needed for.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

Currently, doing synchronize_rcu_mult(call_rcu, call_rcu) might
(or might not) wait for two RCU grace periods.  One approach is
of course "don't do that!", but in CONFIG_PREEMPT=n kernels,
synchronize_rcu_mult(call_rcu, call_rcu_sched) does exactly that.
This results in an ugly #ifdef in sched_cpu_deactivate().

This commit therefore makes __wait_rcu_gp() check for duplicates,
which in turn allows duplicates to be passed to synchronize_rcu_mult()
without risk of waiting twice on the same type of grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds DEBUG_OBJECTS_RCU_HEAD checking to detect call_srcu()
counterparts to double-free bugs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

In Tiny SRCU, __srcu_read_lock() is a trivial function, outweighed by
its EXPORT_SYMBOL_GPL(), and on many architectures, its call sequence.
This commit therefore moves it to srcutiny.h so that it can be inlined.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Commit d160a727 ("srcu: Make SRCU be built by default") in response
to build errors, which were caused by code that included srcu.h
despite !SRCU.  However, srcutiny.o is almost 2K of code, which is not
insignificant for those attempting to run the Linux kernel on IoT devices.
This commit therefore makes SRCU be once again optional, and adjusts
srcu.h to allow error-free inclusion in !SRCU kernel builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>

Comments can be helpful, but assertions carry more force.  This commit
therefore adds lockdep_assert_held() and RCU_LOCKDEP_WARN() calls to
enforce lock-held and interrupt-disabled preconditions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Comments can be helpful, but assertions carry more force.  This
commit therefore adds lockdep_assert_held() and RCU_LOCKDEP_WARN()
calls to enforce lock-held and interrupt-disabled preconditions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes srcu_bootup_announce() check for non-default values
of the auto-expedite holdoff time exp_holdoff and print a message if so.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Because exp_holdoff is not used outside of srcutree.c, it can be static.
This commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit updates rcu_bootup_announce_oddness() to check additional
Kconfig options and module/boot parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a rcupdate_announce_bootup_oddness() function to
print out non-default values of significant kernel boot parameter
settings to aid in debugging.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds WARN_ON_ONCE() calls that trigger if either
rcu_sched_qs() or rcu_bh_qs() are invoked with preemption enabled.
In the immortal words of Peter Zijlstra: "these are much harder to ignore
than comments".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>