Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard:

  - Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME
  - Addition of the I2C for the A31
  - Addition USB Host mode for the A10, A10s, A13 and A20
  - Addition of SATA support for the A10 and A20
  - Change of compatible for the watchdog

* tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits)
  ARM: sunxi: dt: Update the watchdog compatibles
  ARM: sun6i: colombus: Enable the I2C controllers
  ARM: sun6i: Enable the I2C muxing options
  ARM: sun6i: Enable the I2C controllers
  ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board
  ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
  ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts
  ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts
  ARM: sun7i: dt: Add USB host nodes to cubietruck dts
  ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro
  ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro
  ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino
  ARM: sun4i: dt: Add USB host nodes to pcduino.dts
  ARM: sun4i: dt: Add USB host nodes to mini-xplus dts
  ARM: sun4i: dt: Add USB host nodes to hackberry dts
  ARM: sun4i: dt: Add USB host nodes to cubieboard dts
  ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts
  ARM: sun7i: dt: Add USB host bindings
  ARM: sun5i: dt: Add USB host bindings
  ARM: sun4i: dt: Add USB host bindings
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "First batch of AT91 DT material for 3.15" from Nicolas Ferre:

- activate DMA for NAND flash controller
- some binding documentation update for usba and ADC (iio) drivers
- removal of some deprecated ADC (iio) properties

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91/dt: at91-cosino: remove useless adc properties
  ARM: at91/dt: sama5d3: remove useless adc properties
  ARM: at91/dt: at91sam9x5: remove useless adc properties
  ARM: at91/dt: at91sam9g45: remove useless adc properties
  ARM: at91/dt: at91sam9260: remove useless adc properties
  ARM: at91/dt: at91-ariag25: remove useless adc properties
  Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt
  Documentation: dt: iio: improve atmel-adc documentation
  ARM: at91: sama5d3: get rid of atmel_tsadcc driver
  ARM: at91/DT: atmel_usba correct atmel,vbus-gpio meaning
  ARM: at91/DT: add NAND + DMA property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper:

 - mvebu

    - 38x
       - add 2GHz fixed clock, core divider clock, and nand controller

    - 385
       - add nand controller and partitions to 385-DB board

* tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper:

 - dove
    - add system controller node
    - drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI

 - mvebu
    - XP/370
       - change default PCIe apertures
       - switch GP and DB boards internal registers to 0xf1000000
       - correct RAM size on Matrix board
    - 385
       - correct phy connection type for DB board
       - add RD board

* tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu:
  ARM: dove: drop pinctrl PMU reg property
  ARM: mvebu: add Device Tree for the Armada 385 RD board
  ARM: mvebu: use the correct phy connection mode on Armada 385 DB
  ARM: mvebu: the Armada XP Matrix board has 4 GB
  ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
  ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
  ARM: mvebu: change the default PCIe apertures for Armada 370/XP
  ARM: dove: add system controller node

Conflicts:
	arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The dts Makefile has a bunch of nasty conflicts, attempt to resolve
these now to avoid trouble later.

Conflicts:
	arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper:

 - mvebu
    - merge armada 375, 380, 385 boards (mvebu/dt-3xx)

 - kirkwood
    - Add many Synology NAS boards
    - add board HP T5325
    - add L2 cache node
    - add system-controller node
    - add audio node

 - dove
    - add pinctrl and global-config register

Depends:
 - tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes)
    - removed dove PMU interrupt controller

Conflicts:
 - mvebu/soc (arch/arm/boot/dts/Makefile)
    - add/add conflict.
    - move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD)

* tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu:
  ARM: kirkwood: Add dts file describing HP T5325 thin client
  ARM: kirkwood: Add i2c alias so setting bus number
  ARM: kirkwood: Add audio node to kirkwood.dtsi
  ARM: mvebu: select dtbs from MACH_ARMADA_*
  ARM: dove: add global-config register node
  ARM: dove: add additional pinctrl registers
  ARM: mvebu: Instantiate system controller in kirkwood.dtsi
  ARM: kirkwood: Instantiate L2 cache from DT.
  ARM: mvebu: use macros for interrupt flags on Armada 375/38x
  ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
  ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
  ARM: Kirkwood: Add support for many Synology NAS devices
  DT: i2c: Trivial: Add sii,s35390a
  DT: Vendor prefixes: Add ricoh, qnap, sii and synology
  ARM: dove: dt: revert PMU interrupt controller node
  ARM: mvebu: add Device Tree for the Armada 385 DB board
  ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs
  ARM: mvebu: add Device Tree for the Armada 375 DB board
  ARM: mvebu: add Device Tree description of the Armada 375 SoC
  ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260

Conflicts:
	Documentation/devicetree/bindings/vendor-prefixes.txt
	arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "Two more dt related efm32 fixes" from Uwe Kleine-König:

* tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux:
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Dependency for efm32/dt branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:

* r8a7791 (R-Car M2) based koelsch board
  - Add SDHI devices
  - Add ethernet

* r8a7791 (R-Car M2) SoC
  - Correct clock index for i2c5

* r8a7790 (R-Car H2) based lager board
  - Add ethernet

* tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Add SDHI devices for Koelsch DTS
  ARM: shmobile: Add SDHI devices to r8a7791 DTSI
  ARM: shmobile: r8a7791: fix clock index for i2c5
  ARM: shmobile: koelsch: add Ether DT support
  ARM: shmobile: r8a7791: add Ether DT support
  ARM: shmobile: lager: add Ether DT support
  ARM: shmobile: r8a7790: add Ether DT support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:

* r7s72100 SoC (RZ/A1H)
  - Add nodes for i2c controllers to DT

* r7s72100 (RZ/A1H) based Genmai board
  - genmai: adapt dts to use native i2c driver

* r8a7791 SoC (R-Car M2)
  - Remove superfluous interrupt-parents

* r8a7791 (R-Car M2) based Koelsch board
  - Add i2c2 bus to DT
  - Add DU device to DT

* r8a7790 SoC (R-Car H2)
  - Add i2c aliases
  - Remove superfluous interrupt-parents
  - Add QSPI node

* r8a7790 SoC (R-Car M2) based Lager
  - Add DU, SDHI0/1 and QSPI to DT

* r8a7778 SoC (R-Car M1)
  - Remove duplicate i2c nodes

* tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai: adapt dts to use native i2c driver
  ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi
  ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt
  ARM: shmobile: r8a7791: add i2c master nodes to dtsi
  ARM: shmobile: r8a7790: add i2c aliases to dtsi
  ARM: shmobile: r8a7790: remove superfluous interrupt-parents
  ARM: shmobile: r8a7791: remove superfluous interrupt-parents
  ARM: shmobile: koelsch-reference: Add DU device to DTS
  ARM: shmobile: lager: Add DU device to DTS
  ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes
  ARM: shmobile: lager: add SDHI0/2 support on DTS
  ARM: shmobile: lager dts: Add QSPI nodes
  ARM: shmobile: r8a7790 dtsi: Add QSPI node
Signed-off-by: Olof Johansson <olof@lixom.net>

Wolfram Sang pointed out during review of an efm32-i2c driver that the
property to specify the set of pins has a too general name. As several
other efm32 peripherals also have a similar register bit field, add an
"efm32" namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

While removing the 0x prefixes in the unit addresses in reply to a review
comment, I must somehow have messed up these two. Uups.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

The Armada 385-DB board has a NAND flash, so enable it in the
devicetree and add the partitions as prepared in the factory images.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-6-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 38x SoC family has a NAND controller, compatible
with the controller in Armada 370/375/XP SoCs. Add support for
it in the devicetree file.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-5-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 38x SoC family has a clock provider called "Core Divider",
derived from the fixed 2 GHz main PLL clock. This is similar to the
one on A370, A375 and AXP.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-4-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed
other clocks. This commit adds a DT representation of this clock
through a fixed-clock compatible node.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-3-git-send-email-ezequiel.garcia@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

The watchdog compatibles were following a different pattern than the one found
in the other devices. Now that the driver supports the right pattern, switch to
it in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Remove the properties that are not used anymore by the at91_adc driver.

Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Remove the properties that are not used anymore by the at91_adc driver and fix
the atmel,adc-use-external-triggers property name.

Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Remove the properties that are not used anymore by the at91_adc driver and fix
the atmel,adc-use-external-triggers property name.

Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Remove the properties that are not used anymore by the at91_adc driver.

Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Remove the properties that are not used anymore by the at91_adc driver.

Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Remove the properties that are not used anymore by the at91_adc driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This corrects the example by adding #address-cells, #size-cells and a reg for
each trigger to comply to the ePAPR, as suggested by Mark Rutland in
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html

Also, it removes the properties that are not used anymore, to stop propagating
them.
Also fixes atmel,adc-use-external-triggers property name.

Finally, fixes a few typos.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Touchscreen support for at91_adc has been introduced so we can get rid of
atmel_tsadcc.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

atmel,at91sam9rl-udc is a USB gadget, it has no means to control vbus.
atmel,vbus-gpio is in fact used to detect the presence of vbus.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: modify the commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Merge "arm: Xilinx Zynq dt patches for v3.15" from Michal Simek:

- Define fclk-enable property

* tag 'zynq-dt-for-3.15' of git://git.xilinx.com/linux-xlnx:
  arm: dt: zynq: Add fclk-enable property to clkc node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap device tree changes for v3.15, part 2" from Tony Lindgren:

Part two of omap device tree changes enabling driver features
in the dts files.

* tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-evmsk: enable dual_emac mode
  ARM: dts: DRA7: Add device nodes for ABB
  ARM: dts: OMAP4: Add device nodes for ABB
  ARM: dts: OMAP36xx: Add device node for ABB
  ARM: dts: am43x-epos-evm: add SD card hotplug support
  ARM: dts: am335x-evm: add SD card hotplug support
  ARM: dts: am437x gp-evm: add sd card dt nodes
  ARM: dts: omap5: added dt properties to adapt to the new phy framwork
  ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK
  ARM: dts: Update echi-omap DT binding example usage
  ARM: dts: Get rid of incompatible ids for hci-omap USB host nodes
  ARM: OMAP2+: Remove legacy_init_ehci_clk()
  ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/dt

Merge "ARM: bcm2835: DT changes for 3.15" from Stephen Warren:

A variety of features are added to the bcm2835 device trees:
- ARM PMU, for perf_event
- DMA controller
- I2S controller

A few cleanups are applied to the DTs too.

* tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: fix clock DT node names
  ARM: bcm2835: node name unit address cleanup
  ARM: bcm2835: fix DT node sort order
  ARM: bcm2835: add I2S driver to device tree
  ARM: bcm2835: add dmaengine driver to device tree
  ARM: bcm2835: perf_event support for Raspberry-Pi
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mach-bcm dt updates for 3.15" from Matt Porter:

- add BCM4708 dt support
- remove bcm11351-brt
- bcm281xx common clock support

* tag 'armsoc/for-3.15/dt' of git://github.com/broadcom/mach-bcm:
  ARM: dts: remove bcm11351-brt.dts
  ARM: dts: Leave sdio1 as disabled on bcm28155-ap
  ARM: dts: bcm281xx: define real clocks
  ARM: BCM5301X: add dts files for BCM4708 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Keystone DTS updates for 3.15 from Santosh Shilimkar:

- Add watchdog timer, timer64 and gpio device nodes
- Add LED device nodes
- Fixes for debugss, msmc clock nodes
- Add support for Keystone Lamarr and Edision SOC/EVM support
- Add NAND and AEMIF device nodes

* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: add AEMIF/NAND device entry
  ARM: dts: keystone: add support for k2 Edison SoC and EVM
  ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
  ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
  ARM: dts: keystone: update for supporting K2L/K2E EVMs
  ARM: dts: keystone: fix domain id for clkdebugsstrc
  ARM: dts: keystone: drop msmcsram clock node
  ARM: dts: k2hk-evm: rename clock node to clocks
  ARM: dts: k2hk-evm: add leds supports
  ARM: dts: keystone: add gpio device entry
  ARM: dts: keystone: add keystone timer entry
  ARM: dts: keystone: add watchdog entry
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the "atmel,nand-has-dma" property to NAND node for SoC that
can use the DMA to perform NAND accesses.
Use of this property was added in 1b719265
(mtd: atmel_nand: add a new dt binding item for nand dma support).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>

i.MX device tree changes for 3.15, take 2 from Shawn Guo:
 - Cleanup and device additions for imx27-phytec-phycard boards
 - eDMA and audio support for vf610-twr board
 - Minor updates and fixes for a couple of imx28 and imx5 boards

* tag 'imx-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: vf610: i2c: Add eDMA support
  ARM: dts: imx27-phytec-phycore-som: Add USBOTG node
  ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node
  ARM: dts: i.MX27: Add USB nodes
  ARM: dts: vf610-twr: Add ADC support
  ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
  ARM: dts: vf610-twr: Add simple-card support.
  ARM: dts: vf610-twr: Enable SGTL5000 codec.
  ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device
  ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node.
  ARM: dts: vf610: lpuart: Add eDMA support
  ARM: dts: vf610: Add eDMA node
  ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs
  ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
  ARM: dts: i.MX51 babbage: Support diagnostic LED
  ARM: dts: imx28-tx28: Remove 'enable-active-low' property
  ARM: dts: mx53: Remove 'enable-active-low' property
  ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2
  ARM: dts: imx27-phytec-phycard-s-som: Add NFC node
  ARM: dts: imx27-phytec-phycard-s-som: Sort entries
Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX6 device tree changes for 3.15, take 2 from Shawn Guo:
 - Add USB, GPMI and SATA support for imx6q-phytec board
 - Update imx6sl-evk board support regarding PFUZE100, audio and
   LED etc.
 - Minor updates on a few imx6qdl boards

* tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx6q-phytec: Added SATA Support
  ARM: dts: imx6q-phytec: Added GPMI-NAND Support
  ARM: dts: imx6q-phytec: Added USB_HOST Support
  ARM: dts: imx6q-phytec: Added USB_OTG Support
  ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
  ARM: dts: imx6qdl-sabreauto: Support debug LED
  ARM: dts: imx6q: add 852MHz setpoint for CPU freq
  ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
  ARM: dts: imx6sl-evk: Add debug LED support
  ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support
  ARM: dts: imx6sl-evk: Add audio support
  ARM: dts: imx6sl-evk: Add PFUZE100 support
  ARM: dts: imx6qdl-sabresd: correct gpio key's active state
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

A set of device tree-related cleanups for the ux500 platform from Linus
Walleij:

- Rename SSP/SPI clocks to the name found in the hardware
  reference manual. (Also includes a rename in the U300
  device tree file.)
- Delete dead non-DT code.
- Drop now completely unused GPIO definition header file.
- Delete all hardcoded IRQ number assignments. This hits
  MFD a bit so the patch has been ACKed by Lee Jones from
  the MFD side.

* tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  mfd: dbx500/abx500: root out hardcoded IRQ assignments
  ARM: ux500: drop a chunk of GPIO definitions
  ARM: ux500: skip GIC CPU and dist address checks
  ARM: ux500: delete pointless DT config option
  ARM: u300: switch SSP/SPI clock name to "SSPCLK"
  ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
Signed-off-by: Olof Johansson <olof@lixom.net>

Allwinner DT patches for 3.15, take 1 from Maxime Ripard:
  - Add SPI controllers for all the SoCs
  - Add various missing aliases
  - Add USB clocks nodes
  - Addition of the GMAC support
  - Introduction of the pcDuino board
  - A few DT cleanup patches: change of compatibles,

* tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux: (33 commits)
  ARM: sun6i: dt: Fix mod0 compatible
  ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro
  ARM: dt: sun7i: Add SPI muxing options
  ARM: dt: sun5i: Add A13 SPI controller nodes
  ARM: dt: sun5i: Add A10s SPI controller nodes
  ARM: dt: sun4i: Add A10 SPI controller nodes
  ARM: dt: sun7i: Add A20 SPI controller nodes
  ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators
  ARM: sunxi: dt: Convert to the new clock compatibles
  ARM: sun7i: add arch timer node
  ARM: sun7i: dt: Add bindings for USB clocks
  ARM: sun5i: dt: Add bindings for USB clocks
  ARM: sun4i: dt: Add bindings for USB clocks
  ARM: dts: sun7i: Add ethernet alias for GMAC
  ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC
  ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
  ARM: dts: sun7i: cubietruck: Enable the GMAC
  ARM: dts: sun7i: Add pin muxing options for the GMAC
  ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
  ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung exynos clock related DT updates for v3.15 from Kukjim Kim:

- use macros instead of hard coded numbers for clock bindings

NOTE: this is based on v3.15-next/dt-samsung

* tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: use macros in clock bindings for exynos5440
  ARM: dts: use macros in clock bindings for exynos5420
  ARM: dts: use macros in clock bindings for exynos5250
  ARM: dts: use macros in clock bindings for exynos4

Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v3.15 from Kukjin Kim:

For exynos4412
- update vdd_arm voltage range for odroidx board

For exynos5250
- add PMU sysreg node and update watchdog node
- re-organize RTC status
- add max77686 pmic node for smdk5250

For exynos5420
- add PMU sysreg, i2s, adma and watchdog nodes
- re-organize RTC status
- add fixed voltage regulators and regulator nodes
  for smdk5420
- add PMIC, GPIO based wake up key and vmmc-supply
  support for arndale-octa board

* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add vmmc-supply to MMC on arndale-octa board
  ARM: dts: Add wake up key to arndale-octa board
  ARM: dts: Add PMIC support to arndale-octa board
  ARM: dts: Add fixed voltage regulators to smdk5420
  ARM: dts: Add I2S nodes to exynos5420
  ARM: dts: Add ADMA node to exynos5420
  ARM: dts: Re-organize RTC status for exynos5250
  ARM: dts: Re-organize RTC status for exynos5420
  ARM: dts: Add regulator entries to smdk5420
  ARM: dts: add max77686 pmic node for smdk5250
  ARM: dts: update vdd_arm voltage range for exynos4412 based boards
  ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
  ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

OMAP device tree changes from Tony Lindgren:

Device tree related changes for omaps with minor code
changes also to platform data quirks that are still needed
for some features.

* tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (60 commits)
  ARM: dts: omap4+: Add DMM bindings
  ARM: dts: am43x-gp-evm: Add matrix gpio keys.
  ARM: dts: am43xx: add support for parallel NAND flash
  ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  ARM: dts: am335x-evm: NAND: update MTD partition table
  ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes
  ARM: dts: omap3-gta04: Add bma180 accelerometer
  ARM: dts: omap3-gta04: Enable mmc2 for wifi
  ARM: dts: omap3-gta04: Add basic sound support
  ARM: dts: omap3-gta04: Add twl4030 charger
  ARM: dts: omap3-gta04: Add touchscreen properties
  ARM: dts: omap3-gta04: Add support for magnetometer
  ARM: dts: am437x-gp-evm: Enable gpio.
  ARM: dts: am437x-gp-evm: Add pwm backlight support.
  ARM: dts: am437x-gp-evm: Add gp dts.
  ARM: dts: am43x-epos-evm: Add SPI data.
  ARM: dts: am43x-epos-evm: Add I2C2 data.
  pinctrl: am43xx: dt-bindings: add MUX_MODE8
  ARM: dts: am43x-epos-evm: Add pwm backlight support.
  ARM: dts: am4372: Add pwm-cells property for ecap device.
  ...