- 30 Dec, 2008 40 commits
-
-
Hans Verkuil authored
Add the missing video_device documentation to v4l2-framework.txt. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
get_index requires a valid parent device in order to discover which indices are in use. Some drivers (e.g. pvrusb2) do not set the parent device. In that case just return 0. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The bt832 i2c driver was never used or even compiled and is no longer maintained. It is now removed completely. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Andy Walls authored
Use a consistent crystal value of 28.636360 MHz for computing all PLL parameters so clocks don't have relative error due to assumed crystal value mismatches. Also aimed to have all PLLs run their VOCs at close to 400 MHz to minimze the error of these PLLs as frequency synthesizers. Also set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware are loaded. Also fixed I2S Master clock dividers. Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and suggesting the solution, researching and experimenting, and performing extensive testing to support their suggested solution. Reported-by:
Jeff Campbell <jac1dlists@gmail.com> Reported-by:
Mike Bradley <mike.bradley@incanetworks.com> Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for analog captures. It seems to have adverse effects on captures from SVideo and CVBS sources with current clock & crystal settings in the driver. Many thanks to Jeff Campbell and Mike Bradley for reporting this problem, and suggesting the solution and performing extensive testing to support their suggestion. Reported-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Added all missing v4l1/2 ioctls and fix several broken conversions. Partially based on work done by Cody Pisto <cpisto@gmail.com>. Tested-by:
Brandon Jenkins <bcjenkins@tvwhere.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
vidioc_g_ctrl() were using an uneeded confusing logic. Instead, use the direct approach. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Alan Nisota authored
This patch converts the gp8psk module to use the S2API. It pretends to be DVB-S2 capable in order to allow the various supported modulations (8PSK, QPSK-Turbo, etc), and keep software compatibility with the S2API patches for Mythtv and VDR. Signed-off by: Alan Nisota <alannisota@gmail.com> Signed-off-by: -
Mauro Carvalho Chehab authored
This patch uses the same code for enumberating video formats that are present on cx88, bttv and saa7134 drivers. Signed-off-by: -
Mauro Carvalho Chehab authored
The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be awaking xc3028. Instead, since we didn't specify the tuner mode, the device were going to sleep, due to the lack of tuner mode when asking tuner to handle VIDIOC_S_FREQUENCY: xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250) xc2028 0-0061: Putting xc2028/3028 into poweroff mode. xc2028 0-0061: Printing sleep stack trace: Pid: 10936, comm: mplayer Tainted: P M 2.6.27.8 #1 Call Trace: [<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028] [<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner] Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Devin Heitmueller authored
The init_fw option was broken for the HVR-950q because we would call the reset callback inside of dvb_attach() and the callback had not been setup yet. Michael Krufky (who added the init_fw feature) says it's no longer required, so just remove the option completely. Thanks to user Zzeiss from #linuxtv chat for reporting the issue and Michael Krufky <mkrufky@linuxtv.org> for proposing the fix. Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Devin Heitmueller authored
Don't operate under the assumption that every device that uses the em2820 default USB ID is a Prolink PlayTV USB. We have an eeprom hash, so use that, since otherwise we cannot support other devices with the 2820 default USB ID (such as the ADS Tech Instant TV USB USBAV-704) Signed-off-by:
-
Devin Heitmueller authored
Add the em2870 to the list of known em28xx chip ids. Signed-off-by:
-
Darron Broad authored
This cleans-up the advise/acquire methods. This has been tested on the hvr-1300/4000 and assumed to be correct on the hvr-3000. This update also fixes analogue tuning on the hvr-1300 when in blackbird mode. Signed-off-by:
Darron Broad <darron@kewl.org> Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Darron Broad authored
Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Signed-off-by:
-
Darron Broad authored
It has been noticed that in HW tuning mode in cx24123.c that a check is made to not alter the status var when in one shot mode, a simpler solution is to not update here for all cards. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Darron Broad authored
Thanks to AKPM for spotting this. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Darron Broad authored
Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
tuner-xc3028 can be put to sleep to save power. However, if not properly recovered from sleep, the device won't work. It is noticed that some devices doesn't recover properly, so let's add a dump_stack() as a debug option, to allow us to track when this happens. Signed-off-by: -
Mauro Carvalho Chehab authored
Changes/fixes on em28xx dev->lock: - em28xx_init_dev() were unlocking without a previous lock; - some read ioctls need to lock after the removal of KBL, since a write may be happening at the same time an ioctl is reading; - keep the device locked during all device initialization; - lock/unlock while reading/writing registers. Signed-off-by: -
Mauro Carvalho Chehab authored
vidioc_try_fmt_vid_cap() just checks if a given resolution is supported. It doesn't touch on struct em28xx device descriptor. so, there's no need to lock. While there, use unlikely() for those values that aren't likely to occur. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Fix (bogus) compile warning about uninitialized variable. Signed-off-by:
-
Laurent Pinchart authored
Add support for absolute and continuous zoom controls (mapped to absolute and relative UVC zoom controls). Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing control names and menu values. Signed-off-by:
-
Laurent Pinchart authored
The privacy control prevents video from being acquired by the camera. A true value indicates that no image can be captured. Devices that implement the privacy control must support read access and may support write access. Signed-off-by:
-
Laurent Pinchart authored
The zoom controls move the zoom lens group to a an absolute position, as a relative displacement or at a given speed until reaching physical device limits. Positive values move the zoom lens group towards the telephoto direction, negative values towards the wide-angle direction. Signed-off-by:
-
Andy Walls authored
Refine the firmware load and firmware startup process. Significant changes are to ensure the SCB and IPC area are correct before starting up the firmware, and letting the CPU firmware start up the APU firmware for us. Signed-off-by:
-
Andy Walls authored
cx18: Use a known open task handle when setting stream CX2341x parameters Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream. Let's make sure we use a valid task handle to perform the CX2341x control settings. Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Andy Walls authored
VBI comment corrections to avoid future confusion about standards. Comments on cx18 VBI implementation shortcomings that need resolution. Signed-off-by:
-
Andy Walls authored
Removed magic number that referred to firmware limit on the number of MDLs the firmware can maintain for any stream at any one time. Signed-off-by:
-
