In a HVM guest the kernel allocates the page for mapping the shared
info structure via extend_brk() today. This will lead to a drop of
performance as the underlying EPT entry will have to be split up into
4kB entries as the single shared info page is located in hypervisor
memory.

The issue has been detected by using the libmicro munmap test:
unmapping 8kB of memory was faster by nearly a factor of two when no
pv interfaces were active in the HVM guest.

So instead of taking a page from memory which might be mapped via
large EPT entries use a page which is already mapped via a 4kB EPT
entry: we can take a page from the first 1MB of memory as the video
memory at 640kB disallows using larger EPT entries.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

There has been a report about a deadlock in the xenbus driver:

[  247.979498] ======================================================
[  247.985688] WARNING: possible circular locking dependency detected
[  247.991882] 4.12.0-rc4-00022-gc4b25c0 #575 Not tainted
[  247.997040] ------------------------------------------------------
[  248.003232] xenbus/91 is trying to acquire lock:
[  248.007875]  (&u->msgbuffer_mutex){+.+.+.}, at: [<ffff00000863e904>]
xenbus_dev_queue_reply+0x3c/0x230
[  248.017163]
[  248.017163] but task is already holding lock:
[  248.023096]  (xb_write_mutex){+.+...}, at: [<ffff00000863a940>]
xenbus_thread+0x5f0/0x798
[  248.031267]
[  248.031267] which lock already depends on the new lock.
[  248.031267]
[  248.039615]
[  248.039615] the existing dependency chain (in reverse order) is:
[  248.047176]
[  248.047176] -> #1 (xb_write_mutex){+.+...}:
[  248.052943]        __lock_acquire+0x1728/0x1778
[  248.057498]        lock_acquire+0xc4/0x288
[  248.061630]        __mutex_lock+0x84/0x868
[  248.065755]        mutex_lock_nested+0x3c/0x50
[  248.070227]        xs_send+0x164/0x1f8
[  248.074015]        xenbus_dev_request_and_reply+0x6c/0x88
[  248.079427]        xenbus_file_write+0x260/0x420
[  248.084073]        __vfs_write+0x48/0x138
[  248.088113]        vfs_write+0xa8/0x1b8
[  248.091983]        SyS_write+0x54/0xb0
[  248.095768]        el0_svc_naked+0x24/0x28
[  248.099897]
[  248.099897] -> #0 (&u->msgbuffer_mutex){+.+.+.}:
[  248.106088]        print_circular_bug+0x80/0x2e0
[  248.110730]        __lock_acquire+0x1768/0x1778
[  248.115288]        lock_acquire+0xc4/0x288
[  248.119417]        __mutex_lock+0x84/0x868
[  248.123545]        mutex_lock_nested+0x3c/0x50
[  248.128016]        xenbus_dev_queue_reply+0x3c/0x230
[  248.133005]        xenbus_thread+0x788/0x798
[  248.137306]        kthread+0x110/0x140
[  248.141087]        ret_from_fork+0x10/0x40

It is rather easy to avoid by dropping xb_write_mutex before calling
xenbus_dev_queue_reply().

Fixes: fd8aa909 ("xen: optimize xenbus
driver for multiple concurrent xenstore accesses").

Cc: <stable@vger.kernel.org> # 4.11
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

For support of Xen hypervisor live patching the hypervisor build id is
needed. Add a node /sys/hypervisor/properties/buildid containing the
information.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Sync include/xen/interface/version.h with the Xen source.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>

Currently there is no reliable user interface inside a Xen guest to
determine its type (e.g. HVM, PV or PVH). Instead of letting user mode
try to determine this by various rather hacky mechanisms (parsing of
boot messages before they are gone, trying to make use of known subtle
differences in behavior of some instructions), add a sysfs node
/sys/hypervisor/guest_type to explicitly deliver this information as
it is known to the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Today only a few sysfs nodes under /sys/hypervisor/ are documented
for Xen in Documentation/ABI/testing/sysfs-hypervisor-pmu.

Add the remaining Xen sysfs nodes under /sys/hypervisor/ in a new
file Documentation/ABI/stable/sysfs-hypervisor-xen and add the Xen
specific sysfs docs to the MAINTAINERS file.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

On PVH, PVHVM, at failure in the VCPUOP_register_vcpu_info hypercall
we limit the number of cpus to to MAX_VIRT_CPUS. However, if this
failure had occurred for a cpu beyond MAX_VIRT_CPUS, we continue
to function with > MAX_VIRT_CPUS.

This leads to problems at the next save/restore cycle when there
are > MAX_VIRT_CPUS threads going into stop_machine() but coming
back up there's valid state for only the first MAX_VIRT_CPUS.

This patch pulls the excess CPUs down via cpu_down().
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The hypercall VCPUOP_register_vcpu_info can fail. This failure is
handled by making per_cpu(xen_vcpu, cpu) point to its shared_info
slot and those without one (cpu >= MAX_VIRT_CPUS) be NULL.

For PVH/PVHVM, this is not enough, because we also need to pull
these VCPUs out of circulation.

Fix for PVH/PVHVM: on registration failure in the cpuhp prepare
callback (xen_cpu_up_prepare_hvm()), return an error to the cpuhp
state-machine so it can fail the CPU init.

Fix for PV: the registration happens before smp_init(), so, in the
failure case we clamp setup_max_cpus and limit the number of VCPUs
that smp_init() will bring-up to MAX_VIRT_CPUS.
This is functionally correct but it makes the code a bit simpler
if we get rid of this explicit clamping: for VCPUs that don't have
valid xen_vcpu, fail the CPU init in the cpuhp prepare callback
(xen_cpu_up_prepare_pv()).
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

If CONFIG_SMP is disabled, xen_setup_vcpu_info_placement() is called from
xen_setup_shared_info(). This is fine as far as boot goes, but it means
that we also call it in the restore path. This results in an OOPS
because we assign to pv_mmu_ops.read_cr2 which is __ro_after_init.

Also, though less problematically, this means we call xen_vcpu_setup()
twice at restore -- once from the vcpu info placement call and the
second time from xen_vcpu_restore().

Fix by calling xen_setup_vcpu_info_placement() at boot only.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

When Xen restores a PVHVM or PVH guest, its shared_info only holds
up to 32 CPUs. The hypercall VCPUOP_register_vcpu_info allows
us to setup per-page areas for VCPUs. This means we can boot
PVH* guests with more than 32 VCPUs. During restore the per-cpu
structure is allocated freshly by the hypervisor (vcpu_info_mfn is
set to INVALID_MFN) so that the newly restored guest can make a
VCPUOP_register_vcpu_info hypercall.

However, we end up triggering this condition in Xen:
/* Run this command on yourself or on other offline VCPUS. */
 if ( (v != current) && !test_bit(_VPF_down, &v->pause_flags) )

which means we are unable to setup the per-cpu VCPU structures
for running VCPUS. The Linux PV code paths makes this work by
iterating over cpu_possible in xen_vcpu_restore() with:

 1) is target CPU up (VCPUOP_is_up hypercall?)
 2) if yes, then VCPUOP_down to pause it
 3) VCPUOP_register_vcpu_info
 4) if it was down, then VCPUOP_up to bring it back up

With Xen commit 192df6f9122d ("xen/x86: allow HVM guests to use
hypercalls to bring up vCPUs") this is available for non-PV guests.
As such first check if VCPUOP_is_up is actually possible before
trying this dance.

As most of this dance code is done already in xen_vcpu_restore()
let's make it callable on PV, PVH and PVHVM.
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Largely mechanical changes to aid unification of xen_vcpu_restore()
logic for PV, PVH and PVHVM.

xen_vcpu_setup(): the only change in logic is that clamp_max_cpus()
is now handled inside the "if (!xen_have_vcpu_info_placement)" block.

xen_vcpu_restore(): code movement from enlighten_pv.c to enlighten.c.

xen_vcpu_info_reset(): pulls together all the code where xen_vcpu
is set to default.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

A HVM domian booting generates around 200K (evtchn:qemu-dm xen-dyn)
interrupts,in a short period of time. All these evtchn:qemu-dm are bound
to VCPU 0, until irqbalance sees these IRQ and moves it to a different VCPU.
In one configuration, irqbalance runs every 10 seconds, which means
irqbalance doesn't get to see these burst of interrupts and doesn't
re-balance interrupts most of the time, making all evtchn:qemu-dm to be
processed by VCPU0. This cause VCPU0 to spend most of time processing
hardirq and very little time on softirq. Moreover, if dom0 kernel PREEMPTION
is disabled, VCPU0 never runs watchdog (process context), triggering a
softlockup detection code to panic.

Binding evtchn:qemu-dm to next online VCPU, will spread hardirq
processing evenly across different CPU. Later, irqbalance will try to balance
evtchn:qemu-dm, if required.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The improved type-checking version of container_of() triggers a warning for
xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t
contains a signed value:

drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events':
drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of()

This adds a cast to work around the warning.

Cc: Ian Abbott <abbotti@mev.co.uk>
Fixes: 85323a99 ("xen: arm: mandate EABI and use generic atomic operations.")
Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Abbott <abbotti@mev.co.uk>

Change the third parameter to be the required struct xen_dm_op_buf *
instead of a generic void * (which blindly accepts any pointer).
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>

When registering for the Xenstore watch of the node control/sysrq the
handler will be called at once. Don't issue an error message if the
Xenstore node isn't there, as it will be created only when an event
is being triggered.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code place.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

This fixes a problem with reading files larger than 2GB from a UFS-2
file system:

    https://bugzilla.kernel.org/show_bug.cgi?id=195721

The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().

That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.

Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737fSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Bugfixes include:

   - Fix a typo in commit e0926934 ("NFS append COMMIT after
     synchronous COPY") that breaks copy offload

   - Fix the connect error propagation in xs_tcp_setup_socket()

   - Fix a lock leak in nfs40_walk_client_list

   - Verify that pNFS requests lie within the offset range of the layout
     segment"

* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Mark unnecessarily extern functions as static
  SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
  NFSv4.0: Fix a lock leak in nfs40_walk_client_list
  pnfs: Fix the check for requests in range of layout segment
  xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
  pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
  NFS fix COMMIT after COPY

Pull tty fix from Greg KH:
 "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
  lot of people reported as causing lockdep and other warnings.

  Right after I reverted this in my tree, it seems like another
  "correct" fix might have shown up, but it's too late in the release
  cycle to be messing with tty core locking, so let's just revert this
  for now to go back how things always have been and try it again for
  4.13.

  This has not been in linux-next as I only reverted it a few hours ago"

* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: fix port buffer locking"

Pull input subsystem fixes from Dmitry Torokhov:

 - a couple of regression fixes in synaptics and axp20x-pek drivers

 - try to ease transition from PS/2 to RMI for Synaptics touchpad users
   by ensuring we do not try to activate RMI mode when RMI SMBus support
   is not enabled, and nag users a bit to enable it

 - plus a couple of other changes that seemed worthwhile for this
   release

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
  Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
  Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
  Input: synaptics - tell users to report when they should be using rmi-smbus
  Input: synaptics - warn the users when there is a better mode
  Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
  Input: synaptics - clear device info before filling in
  Input: silead - disable interrupt during suspend

Pull RTC fixlet from Alexandre Belloni:
 "A single patch, not really a fix but I don't think there is any reason
  to delay it.

  Change the mailing list address"

* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  MAINTAINERS: update RTC mailing list

Pull SCSI fixes from James Bottomley:
 "This is nine fixes, seven of which are for the qedi driver (new as of
  4.10) the other two are a use after free in the cxgbi drivers and a
  potential NULL dereference in the rdac device handler"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libcxgbi: fix skb use after free
  scsi: qedi: Fix endpoint NULL panic during recovery.
  scsi: qedi: set max_fin_rt default value
  scsi: qedi: Set firmware tcp msl timer value.
  scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
  scsi: qedi: Set dma_boundary to 0xfff.
  scsi: qedi: Correctly set firmware max supported BDs.
  scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
  scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()

Pull rdma fixes from Doug Ledford:
 "For the most part this is just a minor -rc cycle for the rdma
  subsystem. Even given that this is all of the -rc patches since the
  merge window closed, it's still only about 25 patches:

   - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes

   - A few upper layer protocol fixes (IPoIB, iSER, SRP)

   - A modest number of core fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
  RDMA/SA: Fix kernel panic in CMA request handler flow
  RDMA/umem: Fix missing mmap_sem in get umem ODP call
  RDMA/core: not to set page dirty bit if it's already set.
  RDMA/uverbs: Declare local function static and add brackets to sizeof
  RDMA/netlink: Reduce exposure of RDMA netlink functions
  RDMA/srp: Fix NULL deref at srp_destroy_qp()
  RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
  RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
  RDMA/qedr: add null check before pointer dereference
  RDMA/mlx5: set UMR wqe fence according to HCA cap
  net/mlx5: Define interface bits for fencing UMR wqe
  RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
  RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
  RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
  RDMA/hfi1: change PCI bar addr assignments to Linux API functions
  RDMA/hfi1: fix array termination by appending NULL to attr array
  RDMA/iw_cxgb4: fix the calculation of ipv6 header size
  RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
  RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
  RDMA/nes: ACK MPA Reply frame
  ...

This reverts commit 925bb1ce.

It causes lots of warnings and problems so for now, let's just revert
it.

Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.

Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of patches for the aspeed pwm fan driver"

* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
  hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
  hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
  hwmon: (aspeed-pwm-tacho) Select REGMAP

Pull MTD fixes from Brian Norris:
 "NAND updates from Boris:

  tango fixes:
   - Add missing MODULE_DEVICE_TABLE() in tango_nand.c
   - Update the number of corrected bitflips

  core fixes:
   - Fix a long standing memory leak in nand_scan_tail()
   - Fix several bugs introduced by the per-vendor init/detection
     infrastructure (introduced in 4.12)
   - Add a static specifier to nand_ooblayout_lp_hamming_ops definition"

* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
  mtd: nand: make nand_ooblayout_lp_hamming_ops static
  mtd: nand: tango: Update ecc_stats.corrected
  mtd: nand: tango: Export OF device ID table as module aliases
  mtd: nand: samsung: warn about un-parseable ECC info
  mtd: nand: free vendor-specific resources in init failure paths
  mtd: nand: drop unneeded module.h include
  mtd: nand: don't leak buffers when ->scan_bbt() fails

Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.

Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.

This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.

The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.

This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 9b13a4ca ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.

Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.

This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.

This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.

Fixes: 9b13a4ca ("Input: axp20x-pek - do not register input ...")
Reported-by: Сергей Трусов <t.rus76@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.

Pull ACPI fixes from Rafael Wysocki:
 "These revert one more problematic commit related to the ACPI-based
  handling of laptop lids and make some unuseful error messages coming
  from ACPICA go away.

  Specifics:

   - Revert one more commit related to the ACPI-based handling of laptop
     lids that changed the default behavior on laptops that booted with
     closed lids and introduced a regression there (Benjamin Tissoires).

   - Add a missing acpi_put_table() to the code implementing the
     /sys/firmware/acpi/tables interface to prevent a counter in the
     ACPICA core from overflowing (Dan Williams).

   - Drop error messages printed by ACPICA on acpi_get_table() reference
     counting mismatches as they need not indicate real errors at this
     point (Lv Zheng)"

* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
  Revert "ACPI / button: Change default behavior to lid_init_state=open"
  ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service

Pull power management fixes from Rafael Wysocki:
 "These fix two bugs in error code paths in the cpufreq core and in the
  kirkwood-cpufreq driver.

  Specifics:

   - Make cpufreq_register_driver() return an error if the ->init()
     calls fail for all CPUs to prevent non-functional drivers from
     hanging around for no reason (David Arcari).

   - Make kirkwood-cpufreq check the return value of
     clk_prepare_enable() (which may fail) as appropriate (Arvind
     Yadav)"

* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
  cpufreq: cpufreq_register_driver() should return -ENODEV if init fails

Pull /dev/random bug fix from Ted Ts'o:
 "Fix a race on architectures with prioritized interrupts (such as m68k)
  which can causes crashes in drivers/char/random.c:get_reg()"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  fix race in drivers/char/random.c:get_reg()

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: make lx-dmesg command work (reliably)
  mm: consider memblock reservations for deferred memory initialization sizing
  mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified
  mlock: fix mlock count can not decrease in race condition
  mm/migrate: fix refcount handling when !hugepage_migration_supported()
  dax: fix race between colliding PMD & PTE entries
  mm: avoid spurious 'bad pmd' warning messages
  mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once
  pcmcia: remove left-over %Z format
  slub/memcg: cure the brainless abuse of sysfs attributes
  initramfs: fix disabling of initramfs (and its compression)
  mm: clarify why we want kmalloc before falling backto vmallock
  frv: declare jiffies to be located in the .data section
  include/linux/gfp.h: fix ___GFP_NOLOCKDEP value
  ksm: prevent crash after write_protect_page fails

lx-dmesg needs access to the log_buf symbol from printk.c.
Unfortunately, the symbol log_buf also exists in BPF's verifier.c and
hence gdb can pick one or the other.  If it happens to pick BPF's
log_buf, lx-dmesg doesn't work:

  (gdb) lx-dmesg
  Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0:
  Error occurred in Python command: Cannot access memory at address 0x0
  (gdb) p log_buf
  $15 = 0x0

Luckily, GDB has a way to deal with this, see
  https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html

  (gdb) info variables ^log_buf$
  All variables matching regular expression "^log_buf$":

  File <linux.git>/kernel/bpf/verifier.c:
  static char *log_buf;

  File <linux.git>/kernel/printk/printk.c:
  static char *log_buf;
  (gdb) p 'verifier.c'::log_buf
  $1 = 0x0
  (gdb) p 'printk.c'::log_buf
  $2 = 0x811a6aa0 <__log_buf> ""
  (gdb) p &log_buf
  $3 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'verifier.c'::log_buf
  $4 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'printk.c'::log_buf
  $5 = (char **) 0x8048b7d0 <log_buf>

By being explicit about the location of the symbol, we can make lx-dmesg
work again.  While at it, do the same for the other symbols we need from
printk.c

Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.netSigned-off-by: André Draszik <git@andred.net>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>