This can be useful when clock core wants to enable/disable clocks.
Then we don't have to convert the struct clk_core to struct clk to call
clk_enable/clk_disable which is a bit un-align with exist using.

And after introduce clk_core_{enable|disable}_lock, we can refine
clk_enable and clk_disable a bit.

As well as clk_core_{enable|disable}_lock, we also added
clk_core_{prepare|unprepare}_lock and clk_core_prepare_enable/
clk_core_unprepare_disable for clock core to easily use.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

Placeholder for the rk3399 watchdog pclk, some newly exported
rk3228 clockids and a small fix for the not yet used spdif to
displayport clock on the rk3399.

* tag 'v4.8-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: fix incorrect rk3399 spdif-DPTX divider bits
  clk: rockchip: export rk3228 MAC clocks
  clk: rockchip: rename rk3228 sclk_macphy_50m to sclk_mac_extclk
  clk: rockchip: export rk3228 audio clocks
  clk: rockchip: include rk3228 downstream muxes into fractional dividers
  clk: rockchip: fix incorrect rk3228 clock registers
  clk: rockchip: add clock-ids for rk3228 MAC clocks
  clk: rockchip: add clock-ids for rk3228 audio clocks
  clk: rockchip: add a dummy clock for the watchdog pclk on rk3399

Merge tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

Pull tegra clk driver updates from Thierry Reding:

Fixes and enhancements mostly for Tegra210 clocks that allow DSI and
HDMI to work on Tegra X1. There's also a refactoring, including fixes,
the USB PLL.

* tag 'tegra-for-4.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: Initialize UTMI PLL when enabling PLLU
  clk: tegra: Micro-optimize Tegra210 clock setup
  clk: tegra: Make sor_safe the parent of dpaux and dpaux1
  clk: tegra: Mark timer clock as critical
  clk: tegra: Enable sor1 and sor1_src on Tegra210
  clk: tegra: Squash sor1 safe/brick/src into a single mux
  clk: tegra: Disable spread spectrum on pll_d2
  clk: tegra: Fixup post dividers on Tegra210

The only way for a fixed factor clock to change its rate would be to change
its parent rate.

Since passing blindly CLK_SET_RATE_PARENT might break a lot of platforms
that were relying on the fact that the parent rate wouldn't change,
introduce a compatible-based whitelist that will allow clocks to opt-in
that flag.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The CLKSEL_CON32 bit_0 is controlled for spdif_8ch, not spdif_rec_dptx,
it should be bit_8, let's fix it.

Fixes: 11551005 ("clk: rockchip: add clock controller for the RK3399")
Reported-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch exports related MAC clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The sclk_macphy_50m is confusing, the sclk_mac_extclk describes
a external clock  clearly.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch exports related i2s/spdif clocks for dts reference.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3228 clocks were left out, so convert them now.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'imx-clk-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

Pull i.MX clk driver updates from Shawn Guo:

 - A few correction and improvements on pllv3 driver around AV pll clock
   rate calculation, parent setting and power bit handling
 - Correct i.MX6UL GPT2 clock names
 - A couple of minor fixes on i.MX7D clock driver on DRAM clocks

* tag 'imx-clk-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx6ul: fix gpt2 clock names
  clk: imx: refine the powerdown bit of clk-pllv3
  clk: imx: clk-pllv3: fix incorrect handle of enet powerdown bit
  clk: imx: fix pll clock parents
  clk: imx7d: correct dram pll type
  clk: imx7d: correct dram root clk parent select
  clk: imx: correct AV PLL rate formula

* clk-hw-unregister-fixed-rate:
  clk: fixed-rate: add clk_hw_unregister_fixed_rate()

This will be used to migrate to the clk_hw APIs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

1. Add driver remove path.
2. Fix some issues.
   -Fix the ordering issue about clock provider being published.
   -Add error checking upon registering clocks.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add hisi_clk_unregister_* functions.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Add error processing for hisi_clk_register_* functions.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Before, there was an ordering issue that the clock provider
had been published in hisi_clk_init before it could provide
valid clocks to consumers. hisi_clk_alloc is just used to
allocate memory space for struct hisi_clock_data. It makes
it possible to publish the provider after the clocks are ready.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Change the input arguments type to struct platform_device pointer.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.

Cc: Jon Mason <jonmason@broadcom.com>
Cc: Simran Rai <ssimran@broadcom.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Tested-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move closer to a clear split of consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-st-critical:
  clk: st: clkgen-pll: Detect critical clocks
  clk: st: clkgen-fsyn: Detect critical clocks
  clk: st: clk-flexgen: Detect critical clocks

Utilise the new Critical Clock infrastructure to mark clocks which
much not be disabled as CRITICAL.

Clocks are marked as CRITICAL using clk flags.  This patch also
ensures flags are peculated through the framework in the correct
manner.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Utilise the new Critical Clock infrastructure to mark clocks which
much not be disabled as CRITICAL.

Clocks are marked as CRITICAL using clk flags.  This patch also
ensures flags are peculated through the framework in the correct
manner.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Utilise the new Critical Clock infrastructure to mark clocks which
much not be disabled as CRITICAL.

While we're at it, reduce the coverage of the flex_flags variable,
since it's only really used in a single for() loop.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-hi6220-rtc:
  clk: hi6220: Add RTC clock for pl031

Adds clk support for the pl031 RTC on hi6220

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[jstultz: Forward ported, tweaked commit description]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Move the UTMI PLL initialization code form clk-tegra<chip>.c files into
clk-pll.c. UTMI PLL was being configured and set in HW control right
after registration. However, when the clock init_table is processed and
child clks of PLLU are enabled, it will call in and enable PLLU as
well, and initiate SW enabling sequence even though PLLU is already in
HW control. This leads to getting UTMIPLL stuck with a SEQ_BUSY status.

Doing the initialization once during pllu_enable means we configure it
properly into HW control.

A side effect of the commonization/localization of the UTMI PLL init
code, is that it corrects some errors that were present for earlier
generations. For instance, in clk-tegra124.c, it used to have:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)

when the correct shift to use is present in the new version:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)

which matches the Tegra124 TRM register definition.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
[rklein: Merged in some later fixes for potential deadlocks]
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[treding: coding style bike-shedding, remove unused variable]
Signed-off-by: Thierry Reding <treding@nvidia.com>

* clk-notify:
  clk: Provide notifier stubs when !COMMON_CLK

Merge tag 'clk-renesas-for-v4.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull second batch of Renesas clk driver updates from Geert
Uytterhoeven:

  - Add support for R-Car V2H,
  - Add FDP1, DRIF, and thermal clocks on R-Car H3,
  - Correct a wrong parent clock.

* tag 'clk-renesas-for-v4.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a7795: Add THS/TSC clock
  clk: renesas: r8a7795: Add DRIF clock
  clk: renesas: r8a7795: Correct lvds clock parent
  clk: renesas: r8a7795: Provide FDP1 clocks
  clk: renesas: Add R8A7792 support
  clk: renesas: mstp: Document R8A7792 support
  clk: renesas: rcar-gen2: Document R8A7792 support

The clk notifier symbols are hidden by COMMON_CLK.  However on some
platforms HAVE_CLK might be set while COMMON_CLK not which leads to
compile test build errors like:

$ make.cross ARCH=sh
   drivers/devfreq/tegra-devfreq.c: In function 'tegra_actmon_rate_notify_cb':
>> drivers/devfreq/tegra-devfreq.c:391:16: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
     if (action != POST_RATE_CHANGE)
                   ^
   drivers/devfreq/tegra-devfreq.c: In function 'tegra_devfreq_probe':
>> drivers/devfreq/tegra-devfreq.c:654:8: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
     err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
           ^

Export the macros and data type declarations outside of COMMON_CLK ifdef
and provide stubs to fix the compile testing.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Merge tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull support for Renesas R-car M3-W from Geert Uytterhoeven:

Add initial support for the Clock Pulse Generator and Module Standby and
Software Reset modules on the Renesas R-Car M3-W SoC:
  - Basic core clocks,
  - SCIF2 (console) module clock,
  - INTC-AP (GIC) module clock.

* tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Add support for R-Car M3-W
  clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
  clk: renesas: Add r8a7796 CPG Core Clock Definitions
  clk: renesas: cpg-mssr: Document r8a7796 support

This clk is critical to operation of the SoC and should never be
turned off. Furthermore, there are no consumers of this clk so
let's just delete it so things like eMMC work.
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: b1e010c0 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

sor_safe being the parent of the dpaux and dpaux1 clocks, it's not only
natural, but also slightly more efficient, to initialize it before its
children. This avoids orphaning the dpaux and dpaux1 clocks only to get
them reparented when the sor_safe clock is registered.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

It turns out that sor_safe, rather than pll_p, is the parent of the
dpaux and dpaux1 clocks.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>