- 24 Dec, 2014 20 commits
-
-
Peter Oh authored
The minimum number of pulses per burst on FCC radar type 5 is 1. Use this number for correct radar detection. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Alexey Khoroshilov authored
Memory allocated by kmemdup() in rsi_load_ta_instructions() is leaked. But duplication of firmware data here is useless, so the patch removes kmemdup() at all. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Rickard Strandqvist authored
Remove the function rtl92d_set_fw_pwrmode_cmd() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Thomas Graf authored
skb_scrub_packet() is called when a packet switches between a context such as between underlay and overlay, between namespaces, or between L3 subnets. While we already scrub the packet mark, connection tracking entry, and cached destination, the security mark/context is left intact. It seems wrong to inherit the security context of a packet when going from overlay to underlay or across forwarding paths. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiaki Makita authored
When vlan tags are stacked, it is very likely that the outer tag is stored in skb->vlan_tci and skb->protocol shows the inner tag's vlan_proto. Currently netif_skb_features() first looks at skb->protocol even if there is the outer tag in vlan_tci, thus it incorrectly retrieves the protocol encapsulated by the inner vlan instead of the inner vlan protocol. This allows GSO packets to be passed to HW and they end up being corrupted. Fixes: 58e998c6 ("offloading: Force software GSO for multiple vlan tags.") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pravin B Shelar says: ==================== openvswitch: datapath fixes Following patch series is mostly targeted to MPLS fixes. other patches are related datapth transmit path error handling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
In case of error vxlan_xmit_one() can free already freed skb. Also fixes memory leak of dst-entry. Fixes: acbf74a7 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Today vport-send has complex error handling because it involves freeing skb and updating stats depending on return value from vport send implementation. This can be simplified by delegating responsibility of freeing skb to the vport implementation for all cases. So that vport-send needs just update stats. Fixes: 91b7514c ("openvswitch: Unify vport error stats handling") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
MPLS GSO needs to know inner most protocol to process GSO packets. Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Linux stack does not implement GSO for packet with multiple encapsulations. Therefore there was check in MPLS action validation to detect such case, But this check introduced bug which deleted one or more actions from actions list. Following patch removes this check to fix the validation. Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reported-by: Srinivas Neginhal <sneginha@vmware.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
MPLS and Tunnel GSO does not work together. Reject packet which request such GSO. Fixes: 0d89d203 ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Fixes MPLS GSO for case when mpls is compiled as kernel module. Fixes: 0d89d203 ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch rearranges the loop in net_rx_action to reduce the amount of jumping back and forth when reading the code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
We should only perform the softnet_break check after we have polled at least one device in net_rx_action. Otherwise a zero or negative setting of netdev_budget can lock up the whole system. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The commit d75b1ade (net: less interrupt masking in NAPI) required drivers to leave poll_list empty if the entire budget is consumed. We have already had two broken drivers so let's add a check for this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch creates a new function napi_poll and moves the napi polling code from net_rx_action into it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antonio Quartulli authored
Gateway having bandwidth_down equal to zero are not accepted at all and so never added to the Gateway list. For this reason checking the bandwidth_down member in batadv_gw_out_of_range() is useless. This is probably a copy/paste error and this check was supposed to be "!gw_node" only. Moreover, the way the check is written now may also lead to a NULL dereference. Fix this by rewriting the if-condition properly. Introduced by 414254e3 ("batman-adv: tvlv - gateway download/upload bandwidth container") Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
The fragmentation code was replaced in 610bfc6b ("batman-adv: Receive fragmented packets and merge") by an implementation which can handle up to 16 fragments of a packet. The packet is prepared for the split in fragments by the function batadv_frag_send_packet and the actual split is done by batadv_frag_create. Both functions calculate the size of a fragment themself. But their calculation differs because batadv_frag_send_packet also subtracts ETH_HLEN. Therefore, the check in batadv_frag_send_packet "can a full fragment can be created?" may return true even when batadv_frag_create cannot create a full fragment. The function batadv_frag_create doesn't check the size of the skb before splitting it and therefore might try to create a larger fragment than the remaining buffer. This creates an integer underflow and an invalid len is given to skb_split. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sven Eckelmann authored
The fragmentation code was replaced in 610bfc6b ("batman-adv: Receive fragmented packets and merge"). The new code provided a mostly unused parameter skb for the merging function. It is used inside the function to calculate the additionally needed skb tailroom. But instead of increasing its own tailroom, it is only increasing the tailroom of the first queued skb. This is not correct in some situations because the first queued entry can be a different one than the parameter. An observed problem was: 1. packet with size 104, total_size 1464, fragno 1 was received - packet is queued 2. packet with size 1400, total_size 1464, fragno 0 was received - packet is queued at the end of the list 3. enough data was received and can be given to the merge function (1464 == (1400 - 20) + (104 - 20)) - merge functions gets 1400 byte large packet as skb argument 4. merge function gets first entry in queue (104 byte) - stored as skb_out 5. merge function calculates the required extra tail as total_size - skb->len - pskb_expand_head tail of skb_out with 64 bytes 6. merge function tries to squeeze the extra 1380 bytes from the second queued skb (1400 byte aka skb parameter) in the 64 extra tail bytes of skb_out Instead calculate the extra required tail bytes for skb_out also using skb_out instead of using the parameter skb. The skb parameter is only used to get the total_size from the last received packet. This is also the total_size used to decide that all fragments were received. Reported-by: Philipp Psurek <philipp.psurek@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Commit cecda693 ("net: keep original skb which only needs header checking during software GSO") keeps the original skb for packets that only needs header check, but it doesn't drop the packet if software segmentation or header check were failed. Fixes cecda693 ("net: keep original skb which only needs header checking during software GSO") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Dec, 2014 15 commits
-
-
Nicolas Dichtel authored
When xfrm6_policy_check() is used, _decode_session6() is called after some intermediate functions. This function uses IP6CB(), thus TCP_SKB_CB() must be prepared after the call of xfrm6_policy_check(). Before this patch, scenarii with IPv6 + TCP + IPsec Transport are broken. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Reported-by: Huaibin Wang <huaibin.wang@6wind.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The commit d75b1ade (net: less interrupt masking in NAPI) breaks caif. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers caif tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in caif. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
iowrite32() will byteswap it's argument on big endian archs. iowrite32be() will byteswap on little endian archs. Since we don't want to do this unnecessary byteswap on the fast path, doorbell is stored in the NIC's native endianness. Using the right iowrite() according to the arch endianness. CC: Wei Yang <weiyang@linux.vnet.ibm.com> CC: David Laight <david.laight@aculab.com> Fixes: 6a4e8121 ("net/mlx4_en: Avoid calling bswap in tx fast path") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Glöckner authored
The s6000 Xtensa support has been removed from the kernel in 4006e565. There are no other chips using this driver. While the Mentor/Alcatel PE-MCXMAC IP core is also used in other designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere ET-1310, Netlogic XLR/XLS), none of these use this driver as it heavily depends on the s6000 DMA engine. In fact, there is no code sharing across any of the aforementioned devices. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rickard Strandqvist authored
Remove the function port_cfg_dis_learn() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Resolve conflicts between glibc definition of IPV6 socket options and those defined in Linux headers. Looks like earlier efforts to solve this did not cover all the definitions. It resolves warnings during iproute2 build. Please consider for stable as well. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
The changed names are union fields with the same size, so the existing code still works. But, we now update these variables to the correct names. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The commit d75b1ade (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huacai Chen authored
Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend() doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call stmmac_init_ptp(). This patch also fix a "scheduling while atomic" problem when resume from suspend/hibernation. Because stmmac_init_ptp() will trigger scheduling while stmmac_resume() hold a spinlock. Callgraph of "scheduling while atomic": stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() --> stmmac_ptp_register() --> ptp_clock_register() --> device_create() --> device_create_groups_vargs() --> device_add() --> devtmpfs_create_node() --> wait_for_common() --> schedule_timeout() --> __schedule() Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Collins authored
Make TPACKET_V3 signal poll when block is closed rather than for every packet. Side effect is that poll will be signaled when block retire timer expires which didn't previously happen. Issue was visible when sending packets at a very low frequency such that all blocks are retired before packets are received by TPACKET_V3. This caused avoidable packet loss. The fix ensures that the signal is sent when blocks are closed which covers the normal path where the block is filled as well as the path where the timer expires. The case where a block is filled without moving to the next block (ie. all blocks are full) will still cause poll to be signaled. Signed-off-by: Dan Collins <dan@dcollins.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Dec, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2014-12-19 Here's one more pull request for 3.19. It contains the socket type verification fixes from Al Viro as well as an skb double-free fix for 6lowpan from Jukka Rissanen. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <jbenc@redhat.com> Cc: Stefan Assmann <sassmann@redhat.com> Reported-by: Sunil Choudhary <schoudha@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
when skb_gso_segment returns error, the original skb should be freed Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Al Viro authored
same story as cmtp Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Al Viro authored
... rather than relying on ciptool(8) never passing it anything else. Give it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops, trying to evaluate &l2cap_pi(sock->sk)->chan->dst... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-