From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/cdrom/azctd.c:379: warning: `pa_ok' defined but not used

We just tested the page's uptodateness, no point in doing it again.

From: Matt Domsch <Matt_Domsch@dell.com>

* Adds MODULE_VERSION

* Remove check for efi_enabled in efivars_exit() - we aborted module load at
  init based on this already.

From: Matt Domsch <Matt_Domsch@dell.com>

EDD: Remove no longer needed SCSI header file inclusion.

Thanks to ArjanV for reminding me.

From: Jonathan Corbet <corbet@lwn.net>

I noticed a patch went in to Documentation/SubmittingDrivers which tweaked
the URL for KernelTraffic.  Here's a self-serving patch which makes that
section more complete; to be fair, I added two other sites too.  Just in
case it's useful.

From: Jan Kara <jack@ucw.cz>

This patch fixes possible quota files corruption which could happen when root
did not have any inodes&space allocated.

Originally this could not happen as structure would not be written to disk in
that case but with journalled quota we need to write even all-zero structure. 
The fix is not very nice but change of the format on disk is probably worse (I
made a mistake with not including the usage-bitmaps into format :().

From: Stephen Smalley <sds@epoch.ncsc.mil>

This patch against 2.6.6 fixes error handling for two out-of-memory conditions
in selinuxfs, avoiding potential deadlock due to returning without releasing a
semaphore.  The patch was submitted by Karl MacMillan of Tresys.

From: "Randy.Dunlap" <rddunlap@osdl.org>

The module parameter name is incorrect (looks like a thinko).

From: Andreas Gruenbacher <agruen@suse.de>

Here is a patch that re-adds support for more than one directory in SUBDIRS.
We have a number of packages that use this.

The FORCE dependency of crmodverdir seems unnecessary; removing.

(acked by Sam)

From: Christoph Hellwig <hch@lst.de>

This one is missing updates from the v4l1 interfaces in 2.4 to the 2.6ish
v4l2 and thus doesn't compile.  While we're at it also remove the
MOD_{INC,DEC}_USE_COUNT calls in it that were bogus even in 2.4 to avoid
false positives in grep.

From: Christoph Hellwig <hch@lst.de>

If we want new drivers to not use obsolete interfaces we're better off not
mentioning it in the documentation.

From: Christoph Hellwig <hch@lst.de>

This driver is unloadable for the pci case, but not if vlb cards are found so
we can't use the module_exit removal to lock it into memory.

Replace the MOD_INC_USE_COUNT with __module_get in it's module_init routine.

It no longer exists.

drivers/atm/fore200e.c: In function `fore200e_close':
drivers/atm/fore200e.c:1659: warning: use of cast expressions as lvalues is deprecated

From: "Randy.Dunlap" <rddunlap@osdl.org>

kexec is a fairly major and popular feature.  People are shipping it in
products, although it is not known if Linux distributors plan to ship it.

The patch reserves the kexec syscall slots to pin the ABI down for
everyone.


- add kexec_load prototype to syscalls.h

- add LINUX_REBOOT_CMD_KEXEC to reboot.h

- add kexec_load syscall for ia32, ia64, x86_64, ppc32, ppc64

From: Mathieu Chouquet-Stringer <mchouque@online.fr>

If you use O=/someotherdir or KBUILD_OUTPUT=/someotherdir on the following
architectures: alpha, mips, sh and cris, the build process is probably
going to fail at one point or another, depending on the target you used,
because make can't find scripts/Makefile.build or scripts/Makefile.clean.

The following patch fixes this, I greped the whole tree and these four were
the only "offenders" I found.

From: "Sergey S. Kostyliov" <rathamahata@php4.ru>

From: Andi Kleen <ak@muc.de>

The new domain scheduler got miscompiled on x86-64 with gcc 3.3.3-hammer,
which is shipping with some distributions.  The kernel deadlocks eventually
under light stress on SMP systems with the right options.

After some experiments it seems this simple change avoids the
miscompilation.  It also doesn't pessimize the code unduly for other
architectures.

From: Manfred Spraul <manfred@colorfullife.com>

The attached patch adds a simple kmem_cache_alloc_node function: allocate
memory on a given node.  The function is intended for cpu bound structures.
 It's used for alloc_percpu and for the slab-internal per-cpu structures.
Jack Steiner reported a ~3% performance increase for AIM7 on a 64-way
Itanium 2.

Port maintainers: The patch could cause problems if CPU_UP_PREPARE is
called for a cpu on a node before the corresponding memory is attached
and/or if alloc_pages_node doesn't fall back to memory from another node if
there is no memory in the requested node.  I think noone does that, but I'm
not sure.

From: Manfred Spraul <manfred@colorfullife.com>

The slab allocator keeps track of the free objects in a slab with a linked
list of integers (typedef'ed to kmem_bufctl_t).  Right now unsigned int is
used for kmem_bufctl_t, i.e.  4 bytes per-object overhead.

The attached patch implements a per-arch definition of for this type:
Theoretically, unsigned short is sufficient for kmem_bufctl_t and this would
reduce the per-object overhead to 2 bytes.  But some archs cannot operate on
16-bit values efficiently, thus it's not possible to switch everyone to
ushort.

The chosen types are a result of dicussions with the various arch maintainers.

From: Manfred Spraul <manfred@colorfullife.com>

the attached patch switches the SLAB_HWCACHE_ALIGN alignment from the
compile time L1 cache line size to the runtime detected value for i386. 
x86-64 already uses the runtime detection.

From: Nick Piggin <nickpiggin@yahoo.com.au>

If the zone has a very small number of inactive pages, local variable
`ratio' can be huge and we do way too much scanning.  So much so that Ingo
hit an NMI watchdog expiry, although that was because the zone would have a
had a single refcount-zero page in it, and that logic recently got fixed up
via get_page_testone().

Nick's patch simply puts a sane-looking upper bound on the number of pages
which we'll scan in this round.


It fixes another failure case: if the inactive list becomes very small
compared to the size of the active list, active list scanning (and therefore
inactive list refilling) also becomes small.

This patch causes inactive list scanning to be keyed off the size of the
active+inactive lists.  It has the plus of hiding active and inactive
balancing implementation from the higher level scanning code.  It will
slightly change other aspects of scanning behaviour, but probably not
significantly.

Experimenting with various values of DENTRY_STORAGE

 dentry size      objs/slab   dentry size * objs/slab    inline string

   148               26               3848                   32
   152               26               3952                   36
   156               25               3900                   40
   160               24               4000                   44

We're currently at 160.  The patch fairly arbitrarily takes it down to 152, so
we can fit a 35-char name into the inline part of the dentry.

Also, go back to the old way of sizing d_iname so that any arch-specific
compiler-forced alignemnts are honoured.

Fix http://bugme.osdl.org/show_bug.cgi?id=2710.

When the user passed madvise a length of -1 through -4095, madvise blindly
rounds this up to 0 then "succeeds".

From: Brian Gerst <bgerst@didntduck.org>

Generate offsets for thread_info, cpuinfo_x86, and a few others instead of
hardcoding them.

It conflicts with the readq() I/O function.

From: Chris Wright <chrisw@osdl.org>

Add disable param to capabilities module.  Similar to the SELinux param for
disabling at boot time.  This allows vendors to ship single binary image with
capabilities compiled statically, and disable it if they provide another
security model compiled as module.

From: Ram Pai <linuxram@us.ibm.com>

Currently the readahead code tends to read one more page than it should with
seeky database-style loads.  This was to prevent bogus readahead triggering
when we step into the last page of the current window.

The patch removes that workaround and fixes up the suboptimal logic instead.


wrt the "rounding errors" mentioned in this patch, Ram provided the following
description:

  Say the i/o size is 20 pages.

  Our algorithm starts by a initial average i/o size of 'ra_pages/2' which
  is mostly say 16.

  Now every time we take a average, the 'average' progresses as follows
  (16+20)/2=18
  (18+20)/2=19
  (19+20)/2=19
  (19+20)/2=19.....
  and the rounding error makes it never touch 20



Benchmarking sitrep:

			IOZONE

	run on a nfs mounted filesystem:
	client machine 2proc, 733MHz, 2GB memory
	server machine 8proc, 700Mhz, 8GB memory

./iozone -c -t1 -s 4096m -r 128k

drivers/scsi/dpt_i2o.c: In function `adpt_queue':
drivers/scsi/dpt_i2o.c:442: warning: use of cast expressions as lvalues is deprecated
drivers/scsi/dpt_i2o.c: In function `adpt_scsi_register':
drivers/scsi/dpt_i2o.c:2213: warning: use of cast expressions as lvalues is deprecated

From: Arthur Othieno <a.othieno@bluewin.ch>

CONFIG_MAC_SERIAL (drivers/macintosh/macserial.c) is marked obsolete and
currently doesn't build.

benh says: "I though build got fixed recently ...  well, anyway, the driver is
indeed obsolete, there's a new one in drivers/serial now."

From: Matt Porter <mporter@kernel.crashing.org>

Fixes a warning and a printk format in OCP.

From: Olaf Hering <olh@suse.de>

Missing spin_unlock in the error path.

From: Stephen Rothwell <sfr@au1.ibm.com>

This patch stops the iseries_veth driver trying to send every packet to too
many logical partitions.  Consequently, the number of transmit errors falls to
(about) zero from a very large number.  This should also improve performance a
bit as the driver is no longer doing 31 extra skb_clone()s and skb_free()s for
each packet.

From: Paul Mackerras <paulus@samba.org>

At present on ppc32, if the kernel accesses a bad address and causes an
oops, or drops into the xmon debugger, we only have the contents of the
volatile registers available to print.  The reason is that we only save the
volatile registers on entry for a page fault.

This patch restructures the code a bit so that if do_page_fault()
determines that the page fault is caused by a bad kernel access, it returns
to the caller, which then saves the full register set into the exception
frame before calling bad_page_fault().  This way we get the full set of
registers printed in the oops message.

From: Paul Mackerras <paulus@samba.org>

This patch adds module tags for the swim3 (macintosh floppy) driver.

blk_run_page() is incorrectly using page->mapping, which makes it racy against
removal from swapcache.

Make block_sync_page() use page_mapping(), and remove bkl_run_page(), which
only had one caller.

Split the system_state state `SYSTEM_SHUTDOWN' into SYSTEM_HALT,
SYSTEM_POWER_OFF and SYSTEM_RESTART and export system_state to modules.

This allows driver shutdown routines to know why they are being shutdown.  The
IDE subsystem wants this so that it knows to not spin the disks down across a
reboot.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>

This allows building the math-emu code as a module only when
CONFIG_SMP is not set. The fp trap handler cannot be preempted
on a single-CPU (as CONFIG_PREEMPT is not going to be supported
on alpha), so the module can be safely unloaded at any time.

Avoid warnings about truncating them when building the
name database.