- 02 Aug, 2018 20 commits
-
-
Colin Ian King authored
Variables scriptb0 and dp_sgmin are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'scriptb0' set but not used [-Wunused-but-set-variable] warning: variable 'dp_sgmin' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arjun Vynipadath authored
- Updates csio_get_flash_params() to take care of ISSI, Macronix and Winbond FLASH parts. - Assume flash part size to be 4MB if it cannot be identified Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
A long time ago the unfortunate decision was taken to add a self-deletion attribute to the sysfs SCSI device directory. That decision was unfortunate because self-deletion is really tricky. We can't drop that attribute because widely used user space software depends on it, namely the rescan-scsi-bus.sh script. Hence this patch that avoids that writing into that attribute triggers a deadlock. See also commit 7973cbd9 ("[PATCH] add sysfs attributes to scan and delete scsi_devices"). This patch avoids that self-removal triggers the following deadlock: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc2-dbg+ #5 Not tainted ------------------------------------------------------ modprobe/6539 is trying to acquire lock: 000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90 but task is already holding lock: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&shost->scan_mutex){+.+.}: __mutex_lock+0xfe/0xc70 mutex_lock_nested+0x1b/0x20 scsi_remove_device+0x26/0x40 [scsi_mod] sdev_store_delete+0x27/0x30 [scsi_mod] dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x190/0x230 __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&shost->scan_mutex); lock(kn->count#202); lock(&shost->scan_mutex); lock(kn->count#202); *** DEADLOCK *** 2 locks held by modprobe/6539: #0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360 #1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] stack backtrace: CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_circular_bug.isra.34+0x213/0x221 __lock_acquire+0x1a7e/0x1b50 lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe See also https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg54525.html. Fixes: ac0ece91 ("scsi: use device_remove_file_self() instead of device_schedule_callback()") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Introduce these two functions and export them such that the next patch can add calls to these functions from the SCSI core. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Update the driver version to 12.0.0.6 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Enablement of the PBDE optimization brought out some incompatible behaviors under error scenarios. Best to disable and remove the PBDE optimization. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
After memory allocation for the LCB response frame, the memory wasn't zero initialized, and not all fields are set. Thus garbage shows up in the payload. Fix by zeroing the memory at allocation. Also properly set the Capability field based on duration support. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Performance is affected when target queue depth is tracked. An atomic counter is incremented on the submission path which competes with it being decremented on the completion path. In addition, multiple CPUs can simultaniously be manipulating this counter for the same ndlp. Reduce the overhead by only performing the target increment/decrement when the target queue depth is less than the overall adapter depth, thus is actually meaningful. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
During remote port loss fault testing, the driver crashed with the following trace: general protection fault: 0000 [#1] SMP RIP: ... lpfc_nvme_register_port+0x250/0x480 [lpfc] Call Trace: lpfc_nlp_state_cleanup+0x1b3/0x7a0 [lpfc] lpfc_nlp_set_state+0xa6/0x1d0 [lpfc] lpfc_cmpl_prli_prli_issue+0x213/0x440 lpfc_disc_state_machine+0x7e/0x1e0 [lpfc] lpfc_cmpl_els_prli+0x18a/0x200 [lpfc] lpfc_sli_sp_handle_rspiocb+0x3b5/0x6f0 [lpfc] lpfc_sli_handle_slow_ring_event_s4+0x161/0x240 [lpfc] lpfc_work_done+0x948/0x14c0 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc9/0xe0 ret_from_fork+0x55/0x80 After registering a new remoteport, the driver is pulling an ndlp pointer from the lpfc rport associated with the private area of a newly registered remoteport. The private area is uninitialized, so it's garbage. Correct by pulling the the lpfc rport pointer from the entering ndlp point, then ndlp value from at rport. Note the entering ndlp may be replacing by the rport->ndlp due to an address change swap. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Enabling list_debug showed the drivers txcmplq was suffering list corruption. The systems will eventually crash because the iocb free list gets crossed linked with the prings txcmplq. Most systems will run for a while after the corruption, but will eventually crash when a scsi eh reset occurs and the txcmplq is attempted to be flushed. The flush gets stuck in an endless loop. The problem is the abort handler does not hold the sli4 ring lock while validating the IO so the IO could complete while the driver is still preping the abort. The erroneously generated abort, when it completes, has pointers to the original IO that has already completed, and the IO manipulation (for the second time) corrupts the list. Correct by taking the ring lock early in the abort handler so the erroneous abort won't be sent if the io has/is completing. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
CNA ports were showing speed as "unknown" even if the link is up. Add speed decoding for FCOE-based adapters. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
For ABORT_XRI_CN command, firmware identifies XRI to abort by IOTAG and RPI combination. For ELS aborts, driver specifies IOTAG correctly but RPI is not specified. Fix by setting RPI in WQE. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This converts drivers that were only calling transport_deregister_session to use target_remove_session. The calling of transport_deregister_session_configfs via target_remove_session for these types of drivers is ok, because they were not exporting info from fields like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs accessible functions, so they will see no difference. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This converts tcm_fc to use target_remove_session tcm_fc was calling transport_deregister_session_configfs then calling transport_deregister_session when commands have completed. It should be ok for it to call transport_deregister_session_configfs later via target_remove_session because transport_deregister_session_configfs only prevents access from configfs via tpg removal and its call to the close_session callback for that driver, and this is already protected by the ft_lport_lock and its port lookup handling. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This converts the drivers that called transport_deregister_session_configfs and then immediately called transport_deregister_session to use target_remove_session. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This adds a function to remove a session which should be used by drivers that use target_setup_session. The next patches will convert the target drivers to use this new function. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Rename target_alloc_session to target_setup_session to avoid confusion with the other transport session allocation function that only allocates the session and because the target_alloc_session does so much more. It allocates the session, sets up the nacl and registers the session. The next patch will then add a remove function to match the setup in this one, so it should make sense for all drivers, except iscsi, to just call those 2 functions to setup and remove a session. iscsi will continue to be the odd driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
transport_init_session_tags is only called from target_core_transport.c so make it static. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Just have iscsit_start_nopin_timer grab the lock and call __iscsit_start_nopin_timer. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
When __transport_register_session is called from transport_register_session irqs will already have been disabled, so we do not want the unlock irq call to enable them until the higher level has done the final spin_unlock_irqrestore/ spin_unlock_irq. This has __transport_register_session use the save/restore call. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 31 Jul, 2018 20 commits
-
-
Bart Van Assche authored
The cxgbit driver expects that __iscsit_free_cmd() is called before the target core frees the command page list. Since this patch breaks the cxgbit driver, revert it. Reported-by: Varun Prakash <varun@chelsio.com> Fixes: ed88f055 ("scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Varun Prakash <varun@chelsio.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
We use unsigned long, size_t and u64 for dev_size. This has us standardize on u64. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Instead of doing strdup and kstrto* just use match_int for dev params. It will be ok to use int instead of unsigned long in tcmu_set_dev_attrib because that is only being used for max sectors and block size and the supported values for them are well under the max possible integer value. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This patch prevents a bug where data_bitmap is allocated in tcmu_configure_device, userspace changes the max_blocks setting, the device is mapped to a LUN, then we try to access the data_bitmap based on the new max_blocks limit which may now be out of range. To prevent this, we just check if data_bitmap has been setup. If it has then we fail the max_blocks update operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
The tcmu dev is added to the list of tcmu devices during configuration. At this time the tcmu setup has completed, but lio core has not completed its setup. The device is not yet usable so do not try to unmap blocks from it Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Do not allow userspace to block or reset the ring until the device has been configured. This will prevent the bug where userspace can write to those files and access mb_addr before it has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Use the lio core helper to check if the device is configured. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
This just adds a helper function to check if a device is configured and it converts the target users to use it. The next patch will add a backend module user so those types of modules do not have to know the lio core details. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
Use INIT_LIST_HEAD to initialize node list head. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Mike Christie authored
The caller of queue_cmd_ring grabs and releases the lock, so the tcmu_setup_cmd_timer failure handling inside queue_cmd_ring should not call mutex_unlock. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
This patch avoids that building with W=1 causes the compiler to complain about fall-through. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
This patch avoids that sparse reports the following: drivers/scsi/libiscsi.c:1844:23: warning: context imbalance in 'iscsi_exec_task_mgmt_fn' - unexpected unlock Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Douglas Gilbert authored
This patch is motivated by a response in the thread: Re: [PATCH 0/5]stop normal completion path entering a timeout req by Jianchao Wang . It generalizes the error injection of blk_abort_request() to use scsi_debug's "every_nth" mechanism. Ref with original patch to scsi_debug: https://lore.kernel.org/lkml/a68ad043-26a1-d3d8-2009-504ba4230e0f@oracle.com/ Also convert two vmalloc/memset(0) to vzalloc() calls. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Anton Vasilyev authored
tw_probe() returns 0 in case of fail of tw_initialize_device_extension(), pci_resource_start() or tw_reset_sequence() and releases resources. twl_probe() returns 0 in case of fail of twl_initialize_device_extension(), pci_iomap() and twl_reset_sequence(). twa_probe() returns 0 in case of fail of tw_initialize_device_extension(), ioremap() and twa_reset_sequence(). The patch adds retval initialization for these cases. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jia-Ju Bai authored
tscam(), atp870_init(), atp880_init() and atp885_init() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jia-Ju Bai authored
wait_chip_ready() and wait_firmware_ready() are never called in atomic context. They call mdelay() to busy wait which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Jia-Ju Bai authored
mpt_attach() and mptfc_probe() are never called in atomic context. They call kzalloc() and kcalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
The null checks on nvmebuf are redundant as nvmebuf is always obtained from a container_of() and hence can never be null. Remove all the redundant null checks. This also cleans up a static analysis warning. Detected by CoverityScan, CID#1471753 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dominique Martinet authored
Generated by scripts/coccinelle/misc/strncpy_truncation.cocci Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dominique Martinet authored
Generated by scripts/coccinelle/misc/strncpy_truncation.cocci Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-