- 18 Jun, 2019 40 commits
-
-
Enzo Matsumiya authored
Remove double assignment in qla2x00_update_fcport(). Signed-off-by:
Enzo Matsumiya <ematsumiya@suse.de> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
For v3 hw, stash is enabled to promote performance, but it does little to improve performance according to current tests. What's more, it causes exceptions for some situations, so disable it. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
Several error codes will be generated between PHY down to up. This issue was introduced by HW design. The designers came to the conclusion that we should ignore these errors. Signed-off-by:
Jiaxing Luo <luojiaxing@huawei.com> Signed-off-by:
-
Xiang Chen authored
It reports a error as follows from some tools at two places in our code: runtime error: left shift of 4 by 29 places cannot be represented in type 'int' So change the type of the two numbers to unsigned to avoid the error. Signed-off-by:
-
John Garry authored
Macro HISI_SAS_SGE_PAGE_CNT is defined to SG_CHUNK_SIZE, which is 128. This means that sizeof(struct hisi_sas_slot_buf_table) is 4192. This is just over a 4K, which can mean inefficient DMA memory usage (for no PI). Reduce the size of HISI_SAS_SGE_PAGE_CNT to 124 to fit in a 4K page. With this change, we experience no performance hit. Cc: dann frazier <dann.frazier@canonical.com> Signed-off-by:
-
Xiaofei Tan authored
The argument of dev_err() called by multi_bit_ecc_error_process_v3_hw() is not right. We pass two arguments, but there is only one printk format specifier in the string. Also move the print format string to dev_err(). Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiang Chen authored
When removing the driver or when probe fails, we need to delete the PHY timers. Signed-off-by:
-
Bharath Vedartham authored
Replace kmalloc + memcpy with kmemdup. This was reported by coccinelle. Signed-off-by:
Bharath Vedartham <linux.bhar@gmail.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_suspend: drivers/scsi/megaraid/megaraid_sas_base.c:7269:20: warning: variable host set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_aen_polling: drivers/scsi/megaraid/megaraid_sas_base.c:8397:15: warning: variable wait_time set but not used [-Wunused-but-set-variable] 'host' never used since introduction in commit 31ea7088 ("[SCSI] megaraid_sas: add hibernation support") 'wait_time' never used since commit 11c71cb4 ("megaraid_sas: Do not allow PCI access during OCR") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_transition_to_ready: drivers/scsi/megaraid/megaraid_sas_base.c:3900:6: warning: variable cur_state set but not used [-Wunused-but-set-variable] Never used since commit 7218df69 ("[SCSI] megaraid_sas: use the firmware boot timeout when waiting for commands") Signed-off-by:
-
Gen Zhang authored
In _ctl_ioctl_main(), 'ioctl_header' is fetched the first time from userspace. 'ioctl_header.ioc_number' is then checked. The legal result is saved to 'ioc'. Then, in condition MPT3COMMAND, the whole struct is fetched again from the userspace. Then _ctl_do_mpt_command() is called, 'ioc' and 'karg' as inputs. However, a malicious user can change the 'ioc_number' between the two fetches, which will cause a potential security issues. Moreover, a malicious user can provide a valid 'ioc_number' to pass the check in first fetch, and then modify it in the second fetch. To fix this, we need to recheck the 'ioc_number' in the second fetch. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Acked-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Stanley Chu authored
Currently auto-hibernate is activated if host supports auto-hibern8 capability. However error-handling is not implemented, which makes the feature somewhat risky. If either "Hibernate Enter" or "Hibernate Exit" fail during auto-hibernate flow, the corresponding interrupt "UIC_HIBERNATE_ENTER" or "UIC_HIBERNATE_EXIT" shall be raised according to UFS specification. This patch adds auto-hibernate error-handling: - Monitor "Hibernate Enter" and "Hibernate Exit" interrupts after auto-hibernate feature is activated. - If a failure happens, trigger error-handling just like "manual-hibernate" failure and apply the same recovery flow: schedule UFS error handler in ufshcd_check_errors(), and then do host reset and restore in UFS error handler. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Avri Altman <Avri.Altman@wdc.com> Signed-off-by:
-
Stanley Chu authored
Some vendor-specific initialization flow may set its own auto-hibernate timer. In this case, do not overwrite timer value as "default value" in ufshcd_init(). Signed-off-by:
-
Stanley Chu authored
The checking of Auto-Hibernation support is used in many places in the driver, thus re-factor it as ufshcd_is_auto_hibern8_supported() to make code more clean. Signed-off-by:
-
Jason Yan authored
Since we are processing events synchronously now, the second call of sas_ex_join_wide_port() in sas_ex_discover_dev() is not needed. There will be no races with other works in disco workqueue. So remove the second sas_ex_join_wide_port(). I did not change the return value of 'res' to error when discover failed because we need to continue to discover other phys if one phy discover failed. So let's keep that logic as before and just add a debug log to detect the failure. And directly return if second fanout expander attatched to the parent expander because it has nothing to do after the phy is disabled. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Thomas Meyer authored
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Colin Ian King authored
Currently the check for a lockup_detected failure exits via the label return_reset_status that reads and dereferences an uninitialized pointer dev. Fix this by ensuring dev is inintialized to null. Addresses-Coverity: ("Uninitialized pointer read") Fixes: 14991a5bade5 ("scsi: hpsa: correct device resets") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Hariprasad Kelam authored
Fix the following warning reported by coccicheck: drivers/target/iscsi/iscsi_target_nego.c:175:6-8: WARNING: possible condition with no effect (if == else) Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Weitao Hou authored
Fix abord to abort. Signed-off-by:
Weitao Hou <houweitaoo@gmail.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Ondrej Zary authored
Add PCMCIA card support to Future Domain SCSI driver. Tested with IBM SCSI PCMCIA Adapter 40G1890. Signed-off-by:
Ondrej Zary <linux@zary.sk> Signed-off-by:
-
Ondrej Zary authored
Add register bit definitions from documentation to header file and use them instead of magic constants. No changes to generated binary. Signed-off-by:
-
Tyrel Datwyler authored
After a successful SRP login response we call scsi_unblock_requests() to kick any pending IOs. The callback to process this SRP response happens in a tasklet and therefore is in softirq context. The result of such is that when blk-mq is enabled, it is no longer safe to call scsi_unblock_requests() from this context. The result of duing so triggers the following WARN_ON splat in dmesg after a host reset or CRQ reenablement. WARNING: CPU: 0 PID: 0 at block/blk-mq.c:1375 __blk_mq_run_hw_queue+0x120/0x180 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc8 #4 NIP [c0000000009771e0] __blk_mq_run_hw_queue+0x120/0x180 LR [c000000000977484] __blk_mq_delay_run_hw_queue+0x244/0x250 Call Trace: __blk_mq_delay_run_hw_queue+0x244/0x250 blk_mq_run_hw_queue+0x8c/0x1c0 blk_mq_run_hw_queues+0x60/0x90 scsi_run_queue+0x1e4/0x3b0 scsi_run_host_queues+0x48/0x80 login_rsp+0xb0/0x100 ibmvscsi_handle_crq+0x30c/0x3e0 ibmvscsi_task+0x54/0xe0 tasklet_action_common.isra.3+0xc4/0x1a0 __do_softirq+0x174/0x3f4 irq_exit+0xf0/0x120 __do_irq+0xb0/0x210 call_do_irq+0x14/0x24 do_IRQ+0x9c/0x130 hardware_interrupt_common+0x14c/0x150 This patch fixes the issue by introducing a new host action for unblocking the scsi requests in our seperate work thread. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
The current implemenation relies on two flags in the driver's private host structure to signal the need for a host reset or to reenable the CRQ after a LPAR migration. This patch does away with those flags and introduces a single action flag and defined enums for the supported kthread work actions. Lastly, the if/else logic is replaced with a switch statement. Signed-off-by:
-
Tyrel Datwyler authored
Wire up the host_reset function in our driver_template to allow a user requested adpater reset via the host_reset sysfs attribute. Example: echo "adapter" > /sys/class/scsi_host/host0/host_reset Signed-off-by:
-
James Smart authored
Update lpfc version to 12.2.0.3 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Kernel warnings may be seen with preempt debugging enabled. Replace smp_processor_id calls with raw_smp_processor_id or cpu information stored in hdwq structures. Signed-off-by:
-
James Smart authored
Crashes in scsi_queue_rq or in dma_unmap_direct_sg during BFS when lpfc has lpfc_enable_bg=1. lpfc is setting DIX and prot sg after scsi_add_host_with_dma() has been called. The scsi_host_set_prot() and scsi_host_set_guard() routines need to be called before scsi_add_host_with_dma(). Revise the calling sequence to set the protection/guard data before calling scsi_add_host_with_dma(). Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
James Smart authored
FDMI protocol support registration was not accurately showing nvme support. The fcponly-path clears the parameter object. Move the code out of the fcponly code path. Fix the FDMI registration data to properly check for nvme support. Commonize the manner in which the fdmi routines set protocol support. Signed-off-by:
-
James Smart authored
Issuing a LUN reset was resulting in a command failure which then escalated to a host reset. The FCP-4 spec allows fcp_rsp_len field to specify the number of valid bytes of FCP_RSP_INFO, and the value could be 4 or 8. The driver is allowing only a value of 8, thus it failed the command. Revise the driver to allow 4 or 8. Signed-off-by:
-
James Smart authored
While fixing the resources per socket, realized the driver was not using hardware queues (up to 1 per cpu) if there were fewer interrupt vectors. The driver was only using the hardware queue assigned to the cpu with the vector. Rework the affinity map check to use the additional hardware queue elements that had been allocated. If the cpu count exceeds the hardware queue count - share, but choose what is shared with by: hyperthread peer, core peer, socket peer, or finally similar cpu in a different socket. Signed-off-by:
-
James Smart authored
The driver was coded expecting enough hardware queues and interrupt vectors such that at least there was one per socket. In the case where there were fewer than sockets, cpus were left unassigned thus null pointers. Rework the affinity mappings. Map settings for the cpu's that are in the irq cpu mask. For each cpu not in the mask, map to another cpu that does have a mask. Choice of the "other" cpu will attempt to map to the same cpu but differing hyperthread, or cpu within in same core, or cpu within same socket, or finally cpu in the base socket. Signed-off-by:
-
James Smart authored
Invalid logical speed is displayed for trunk enabled ports when all ports are down. Also noted that link speed is incorrectly reported for the units when links are up. Current code is returning the logical link speed from the last event from the adapter. In cases where the last link went down, the link speed in the event was not valid - meaning that although the links where down the field had a bogus value. Rework the event handling to qualify the trunk link state before using the event speed data. Also correct units on other areas where the logical link speed was taken from a link event. Signed-off-by:
-
James Smart authored
eq create is leaking mailbox memory if it encounters an error. rework error path to free the memory. Signed-off-by:
-
James Smart authored
The driver unconditionally says fw doesn't support nvme when in truth it was a driver parameter settings that disabled nvme support. Rework the code validating nvme support to accurately report what condition is disabling nvme support. Save state on whether nvme fw supports nvme in case sysfs attributes change dynamically. Signed-off-by:
-
James Smart authored
There is a race condition with the abort handler declaring a waitq item on it's stack, followed by a timeout in the abort handler that has it give up on the abort return to its caller. When the io is finally aborted and its completion handler called, it references the waitq element that the abort_handler set up, which is no longer valid resulting in a deadlock. Fix by clearing the waitq reference, under lock, when the abort handler timeout gives up. Have the completion handler validate the waitq before referencing it. Signed-off-by:
-
James Smart authored
When queued work is executed posting a new command to the transport the driver is reporting a null buffer. The driver had received an ABTS which matched a command that had been scheduled for delivery to the transport. The driver proceeded to cancel the command, but the work item was never cancelled. Fix by cancelling the queued work item. Also turns out the ABTS response was not properly sending a BA_ACC, so set the flag to send the ACC. Signed-off-by:
-
James Smart authored
Use-after-free memory overwrite detected. Problem reported by Ewan Milne at Red Hat after running lpfc target with additional memory checking enabled. Race condition when lpfc_nvmet_xmt_ls_rsp_cmp frees the ctxp memory in interrupt context before lpfc_nvmet_xmt_ls_rsp clears a field in the ctxp after successfully issuing the wqe. Remove the unnecessary ctxp write after reposting the rq buffer. The ctxp->rqb_buffer field is not checked in LS handling after the wqe is submitted. Signed-off-by:
-
James Smart authored
Under heavy load the target stops responding, the drivers aborts timeout and we start recovery by logging out of the target, but the target is never logged into again. In a point-to-point scenario, there were battling PLOGI's. When we received a PLOGI request after having sent one, the driver cancels the processing of the original plogi. However, the completion path of the remaining plogi was coded to skip the reg_rpi that should be happening on the 2nd plogi. Correct by adding a simple pt2pt check such that the 2nd plogi isn't skipped and the reg_login occurs. Signed-off-by:
-
James Smart authored
Turns out the message change in 12.2.0.1 for unsupported topology makes the linux driver out of sync with other products. Revert the message back to the prior content for product consistency. Signed-off-by:
-
James Smart authored
The driver currently is relying on firmware to match ABTSs to existing exchanges. This works fine as long as an exchange has been assigned to the io and work posted to it. However, for unmapped frames (rxid=0xFFFF), the driver has yet to assign an xri. The driver was blindly saying it couldn't match the ABTS and sending the BA_xxx. However, the command frame may have been in queues waiting on xri's before posting to the nvmet_fc layer. When xri's became available, the command frame would still be pushed to the transport and that io would execute, even though the io had been killed by ABTS. The initiator, seeing the io ABTS'd, would reuse the exchange for a different io which would be received on the target and pushed up. If the "zombie" io then came back down and started transmitting, the initiator would match the oxid and accept erroneous data. Bad things happened. Add tracking of active exchanges in the target to allow matching of a received ABTS against active or pending IO requests. If the ABTS is matched to a pending or active IO, the drive initiates cleanup and conditionally notifies the transport. Signed-off-by:
-
