- 28 Oct, 2013 3 commits
-
-
Hendrik Brueckner authored
Make smatch happy and remove this warning: drivers/tty/hvc/hvc_iucv.c:1320 hvc_iucv_init() info: redundant null check on hvc_iucv_filter calling kfree() Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Weinhuber authored
We check for the existence of block->profile.data before we write to it, but the dependent code block misses braces. Signed-off-by:
Stefan Weinhuber <wein@de.ibm.com> Signed-off-by:
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
- 24 Oct, 2013 37 commits
-
-
Sebastian Ott authored
Cleanup function information block used as a modify pci function parameter. Change reserved members to be anonymous. Fix the size of the struct and add proper alignment information. Also put the FIB on the stack. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Add debugfs entries regardless of CONFIG_PCI_DEBUG. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Cleanup arch specific pci messages. Remove unhelpful messages and replace others with entries in the debugfs. Reviewed-by:
-
Martin Schwidefsky authored
Signed-off-by: -
Heiko Carstens authored
Add four more defconfigs which we maintained outside of the kernel tree for no good reason. Inside of the kernel tree they can be easily used: make whatever_defconfig "make help" shows the available defconfigs. Signed-off-by:
-
Heiko Carstens authored
Optimize this_cpu_* functions for 64 bit by making use of new instructions that came with the interlocked-access facility 1 (load-and-*) and the general-instructions-extension facility (asi, agsi). That way we get rid of the compare-and-swap loop in most cases. Code size reduction (defconfig, -march=z196): 11,555 bytes. Signed-off-by:
-
Heiko Carstens authored
Remove the special cases for the this_cpu_* functions for 32 bit in order to make it easier to add additional code for 64 bit. 32 bit will use the generic implementation. Signed-off-by:
-
Heiko Carstens authored
Make psw32_user_bits a constant value again. This is a leftover of the code which allowed to run the kernel either in primary or home space which got removed with 9a905662 "s390/uaccess: always run the kernel in home space". Signed-off-by:
-
Heiko Carstens authored
Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by:
-
Martin Schwidefsky authored
The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by:
-
Martin Schwidefsky authored
There is a debugging leftover from git commit 4d334fd1 "s390/3270: asynchronous size sensing" in raw3270_reset_device_cb. Under z/VM the diagnose 0x210 can be used to find the correct size of the 3270 terminal. Signed-off-by:
-
Ingo Tuchscherer authored
If a machine has no hardware support for the xts-aes or ctr-aes algorithms they are not registered in aes_s390_init. But aes_s390_fini unconditionally unregisters the algorithms which causes crypto_remove_alg to crash. Add two flag variables to remember if xts-aes and ctr-aes have been added. Signed-off-by:
Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Make smatch happy and remove this warning: drivers/s390/char/raw3270.c:347 raw3270_irq() error: we previously assumed 'rq' could be null (see line 342) Signed-off-by: -
Gerald Schaefer authored
This patch fixes the following smatch warning: monwrite_diag() error: strcpy() '"LNXAPPL"' too large for 'id.prod_nr' (8 vs 7) Using strcpy() is wrong, because it also copies the terminating null byte, but in this case the extra copied null byte will be overwritten right after the strcpy(), so there is no real problem here. Use strncpy() to fix the warning. Signed-off-by:
-
Heiko Carstens authored
Just change the type of "len" to unsigned int so the compiler can prove that we don't have a buffer overflow (and generates less code). We get rid of these: In function 'copy_from_user', inlined from 'appldata_interval_handler' at arch/s390/appldata/appldata_base.c:265: uaccess.h:303: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct In function 'copy_from_user', inlined from 'appldata_timer_handler' at arch/s390/appldata/appldata_base.c:225: uaccess.h:303: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct In function 'copy_from_user', inlined from 'appldata_generic_handler' at arch/s390/appldata/appldata_base.c:333: uaccess.h:303: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct Signed-off-by: -
Heiko Carstens authored
Get rid of these two warnings: In function 'copy_from_user', inlined from 'cmm_timeout_handler' at arch/s390/mm/cmm.c:310: uaccess.h:303: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct In function 'copy_from_user', inlined from 'cmm_pages_handler' at arch/s390/mm/cmm.c:270: uaccess.h:303: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct Change the "len" type to unsigned int, so we can make sure that there is no buffer overflow. This also generates less code. Signed-off-by: -
Heiko Carstens authored
Get rid of this one: arch/s390/kernel/cache.c: In function 'cache_build_info': arch/s390/kernel/cache.c:144: warning: 'private' may be used uninitialized in this function Signed-off-by:
-
Heiko Carstens authored
Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by:
-
Michael Holzheu authored
Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Missing parenthesis may cause problems when using the defines together with operations of higher precedence. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS CPUss. This dependency is not necessary. So remove it by dynamically allocating the save area array. Signed-off-by:
-
Heiko Carstens authored
Steven Rostedt noted that s390 is the only architecture which calls ftrace_push_return_trace() before ftrace_graph_entry() and therefore has the small advantage that trace.depth gets initialized automatically. However this small advantage isn't worth the difference and possible subtle breakage that may result from this. So change s390 to have the same function call order like all other architectures: first ftrace_graph_entry(), then ftrace_push_return_trace() Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Heiko Carstens authored
Get rid of this compile warning: arch/s390/kernel/crash_dump.c: In function 'copy_from_realmem': arch/s390/kernel/crash_dump.c:48:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Signed-off-by: -
Chen Gang authored
The type of 'v->counter' is always 'int', and related inline assembly code also process 'int', so use 'unsigned int' instead of 'unsigned long' for the 'mask'. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Heiko Carstens authored
If [__]get_user_pages_fast() gets called with nr_pages == 0, the current code would walk the page tables and pin as many pages until the first invalid pte (or the kernel crashed while writing struct page pointers to the pages array). So let's handle at least the nr_pages == 0 case correctly and exit early. Signed-off-by:
-
Heiko Carstens authored
Just call __get_user_pages_fast() from get_user_pages_fast() like powerpc. This saves a lot of duplicated code. Reviewed-by:
-
Martin Schwidefsky authored
With dirty and referenced bits implemented in software it is unnecessary to initialize the storage key for every page. With this patch not a single storage key operation is done for a system that does not use KVM. For KVM set_pte_at/pgste_set_key will do the initialization for the guest view of the storage key when the mapping for the page is established in the host. Signed-off-by: -
Martin Schwidefsky authored
The prolog of functions generated by the bpf jit compiler uses an instruction sequence with an "ahi" instruction to create stack space instead of using an "aghi" instruction. Using the 32-bit "ahi" is not wrong as the stack we are operating on is an order-4 allocation which is always aligned to 16KB. But it is more consistent to use an "aghi" as the stack pointer is a 64-bit value. Signed-off-by: -
Heiko Carstens authored
- turn some macros into functions - merge two almost identical versions for 32/64 bit - add BUILD_BUG_ON() check to make sure the passed in array is large enough Signed-off-by:
-
Sebastian Ott authored
When quiescing an eadm subchannel make sure that outstanding IO is cleared and potential timeout handlers are canceled. Reviewed-by:
-
Sebastian Ott authored
Implement architecture-specific functionality when a PCI device is doing a hibernate transition. Signed-off-by:
-
Martin Schwidefsky authored
Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: -
Heiko Carstens authored
find_first_bit_left() and friends have nothing to do with the normal LSB0 bit numbering for big endian machines used in Linux (least significant bit has bit number 0). Instead they use MSB0 bit numbering, where the most signficant bit has bit number 0. So rename find_first_bit_left() and friends to find_first_bit_inv(), to avoid any confusion. Also provide inv versions of set_bit, clear_bit and test_bit. This also removes the confusing use of e.g. set_bit() in airq.c which uses a "be_to_le" bit number conversion, which could imply that instead set_bit_le() could be used. But that is entirely wrong since the _le bitops variant uses yet another bit numbering scheme. Signed-off-by:
-
Heiko Carstens authored
Since z9 109 we have the flogr instruction which can be used to implement optimized versions of __ffs, ffs, __fls, fls and fls64. So implement and use them, instead of the generic variants. This reduces the size of the kernel image (defconfig, -march=z9-109) by 19,648 bytes. Signed-off-by:
-
Heiko Carstens authored
Just like all other architectures we should use out-of-line find bit operations, since the inline variant bloat the size of the kernel image. And also like all other architecures we should only supply optimized variants of the __ffs, ffs, etc. primitives. Therefore this patch removes the inlined s390 find bit functions and uses the generic out-of-line variants instead. The optimization of the primitives follows with the next patch. With this patch also the functions find_first_bit_left() and find_next_bit_left() have been reimplemented, since logically, they are nothing else but a find_first_bit()/find_next_bit() implementation that use an inverted __fls() instead of __ffs(). Also the restriction that these functions only work on machines which support the "flogr" instruction is gone now. This reduces the size of the kernel image (defconfig, -march=z9-109) by 144,482 bytes. Alone the size of the function build_sched_domains() gets reduced from 7 KB to 3,5 KB. We also git rid of unused functions like find_first_bit_le()... Signed-off-by:
-
Hendrik Brueckner authored
Refactor direct debug level comparisons with the (internal) s390db->level member. Use the debug_level_enabled() function instead. Signed-off-by:
-
Hendrik Brueckner authored
Add the debug_level_enabled() function to check if debug events for a particular level would be logged. This might help to save cycles for debug events that require additional information collection. Signed-off-by:
-
