- 23 Oct, 2007 40 commits
-
-
Thomas Gleixner authored
Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
The x86_64 arch/x86/kernel/Makefile uses references into arch/x86/kernel/cpu/... to use code from there. Unifiy it with the nicely structured i386 way and reuse the existing subdirectory make rules. Also move the machine check related source into ...kernel/cpu/mcheck, where the other machine check related code is. No code change. Signed-off-by:
-
Thomas Gleixner authored
Move mce.c to mce_32.c to allow the later move of the x86_64 mce.c from arch/x86/kernel/ to ...kernel/cpu/mcheck No code change. Signed-off-by:
-
Thomas Gleixner authored
Prepare the makefiles in x86/kernel/cpu and x86/kernel/cpu/mcheck to be used by the x86_64 build as well. No code change. Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Preperatory patch to simplify the sharing of Makefiles in arch/x86. Linus came up with this during a discussion about the ugliness of ifeq($CONFIG_X86_32),y) and obj-$(CONFIG_X86_32) in the shared Makefiles. Signed-off-by:
-
Chris Snook authored
Unify x86 div64.h headers. Signed-off-by:
Chris Snook <csnook@redhat.com> Signed-off-by:
-
Chris Snook authored
Unify x86 a.out_32.h and a.out_64.h [ tglx: Kbuild fixup ] Signed-off-by:
-
Hiroshi Shimamoto authored
Most of contents in crash are same. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by:
-
Hiroshi Shimamoto authored
Preperatory patch to allow crash_32/64.c merging Signed-off-by:
-
Hiroshi Shimamoto authored
Preperatory patch to allow crash_32/64.c merging Signed-off-by:
-
Chris Snook authored
Merge mmu_32.h and mmu_64.h into mmu.h. Signed-off-by:
-
Alejandro Martinez Ruiz authored
Signed-off-by:
Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by:
-
Dave Johnson authored
The previous patch wasn't correctly handling the 'count' variable. If a CPU gave bad results on the 1st or 2nd run but good results on the 3rd, it wouldn't do the correct thing. No idea if any such CPU exists, but the patch below handles that case by discarding the bad runs. If a bad result (too quick, or too slow) occurs on any of the 3 runs it will be discarded. Also updated some comments to explain what's going on. Signed-off-by:
Dave Johnson <djohnson@sw.starentnetworks.com> Signed-off-by:
-
Dave Johnson authored
I ran into this problem on a system that was unable to obtain NTP sync because the clock was running very slow (over 10000ppm slow). ntpd had declared all of its peers 'reject' with 'peer_dist' reason. On investigation, the tsc_khz variable was significantly incorrect causing xtime to run slow. After a reboot tsc_khz was correct so I did a reboot test to see how often the problem occurred: Test was done on a 2000 Mhz Xeon system. Of 689 reboots, 8 of them had unacceptable tsc_khz values (>500ppm): range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 21 3.048% 1999800 - 1999850 166 24.128% 1999850 - 1999900 241 35.029% 1999900 - 1999950 211 30.669% 1999950 - 2000000 42 6.105% 2000000 - 2000000 0 0.000% 2000050 - 2000100 0 0.000% [...] 2000100 - 2015000 1 0.145% << BAD 2015000 - 2030000 6 0.872% << BAD 2030000 - 2045000 1 0.145% << BAD 2045000 < 0 0.000% The worst boot was 2032.577 Mhz, over 1.5% off! It appears that on rare occasions, mach_countup() is taking longer to complete than necessary. I suspect that this is caused by the CPU taking a periodic SMI interrupt right at the end of the 30ms calibration loop. This would cause the loop to delay while the SMI BIOS hander runs. The resulting TSC value is beyond what it actually should be resulting in a higher tsc_khz. The below patch makes native_calculate_cpu_khz() take the best (shortest duration, lowest khz) run of it's 3 calibration loops. If a SMI goes off causing a bad result (long duration, higher khz) it will be discarded. With the patch applied, 300 boots of the same system produce good results: range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 30 10.000% 1999800 - 1999850 166 55.333% 1999850 - 1999900 89 29.667% 1999900 - 1999950 15 5.000% 1999950 < 0 0.000% Problem was found and tested against 2.6.18. Patch is against 2.6.22. Signed-off-by: -
Nick Piggin authored
I missed an obvious one! x86 CPUs are defined not to reorder stores past earlier loads, so there is no hardware memory barrier required to implement a release-consistent store (all stores are, by definition). So ditch the generic lock bitops, and implement optimised versions for x86, which removes the mfence from __clear_bit_unlock (which is already a useful primitive for SLUB). Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Adrian Bunk authored
It seems commit 09cadedb was incomplete due to a clash with the x86 architecture merge. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: v9fs_vfs_rename incorrect clunk order 9p: fix memleak in fs/9p/v9fs.c 9p: add virtio transport
-
Ralf Baechle authored
Commits 58b053e4 ("Update arch/ to use sg helpers") 45711f1a ("[SG] Update drivers to use sg helpers") fa05f128 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Latchesar Ionkov authored
In v9fs_vfs_rename function labels don't match the fids that are clunked. The correct clunk order is clunking newdirfid first and then olddirfid next. Signed-off-by:
Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com>
-
Adrian Bunk authored
This patch fixes a memory leak introduced by commit ba17674f. Spotted by the Coverity checker. Signed-off-by:
-
Eric Van Hensbergen authored
This adds a transport to 9p for communicating between guests and a host using a virtio based transport. Signed-off-by: -
Emil Medve authored
Signed-off-by:
Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by:
-
Emil Medve authored
Signed-off-by:
-
Jens Axboe authored
Suggested by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguestLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (45 commits) Use "struct boot_params" in example launcher Loading bzImage directly. Revert lguest magic and use hook in head.S Update lguest documentation to reflect the new virtual block device name. generalize lgread_u32/lgwrite_u32. Example launcher handle guests not being ready for input Update example launcher for virtio Lguest support for Virtio Remove old lguest I/O infrrasructure. Remove old lguest bus and drivers. Virtio helper routines for a descriptor ringbuffer implementation Module autoprobing support for virtio drivers. Virtio console driver Block driver using virtio. Net driver using virtio Virtio interface Boot with virtual == physical to get closer to native Linux. Allow guest to specify syscall vector to use. Rename "cr3" to "gpgdir" to avoid x86-specific naming. Pagetables to use normal kernel types ...
-
Herbert Xu authored
As it is some callers of synchronize_irq rely on memory barriers to provide synchronisation against the IRQ handlers. For example, the tg3 driver does tp->irq_sync = 1; smp_mb(); synchronize_irq(); and then in the IRQ handler: if (!tp->irq_sync) netif_rx_schedule(dev, &tp->napi); Unfortunately memory barriers only work well when they come in pairs. Because we don't actually have memory barriers on the IRQ path, the memory barrier before the synchronize_irq() doesn't actually protect us. In particular, synchronize_irq() may return followed by the result of netif_rx_schedule being made visible. This patch (mostly written by Linus) fixes this by using spin locks instead of memory barries on the synchronize_irq() path. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: always check SIGCHLD in selinux_task_wait
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Add Vitaly Bordug as PPC8xx maintainer [POWERPC] 4xx: Enable EMAC on Bamboo board [POWERPC] 4xx: Enable EMAC for PPC405 Walnut board [POWERPC] 4xx: Fix timebase clock selection on Walnut [POWERPC] 4xx: Enable EMAC on the PPC 440GP Ebony board [POWERPC] 4xx: Split early debug output and early boot console for 44x [POWERPC] 4xx: Enable NEW EMAC support for Sequoia 440EPx. [POWERPC] 4xx: Add RGMII support for Sequoia 440EPx
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: [MTD] [NOR] Fix deadlock in Intel chip driver caused by get_chip recursion [JFFS2] Fix return value from jffs2_write_end() [MTD] [OneNAND] Fix wrong free the static address in onenand_sim [MTD] [NAND] Replace -1 with -EBADMSG in nand error correction code [RSLIB] BUG() when passing illegal parameters to decode_rs8() or decode_rs16() [MTD] [NAND] treat any negative return value from correct() as an error [MTD] [NAND] nandsim: bugfix in initialization [MTD] Fix typo in Alauda config option help text. [MTD] [NAND] add s3c2440-specific read_buf/write_buf [MTD] [OneNAND] onenand-sim: fix kernel-doc and typos [JFFS2] Tidy up fix for ACL/permissions problem.
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds authored
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] ARRAY_SIZE() cleanup [AVR32] Implement at32_add_device_cf() [AVR32] Implement more at32_add_device_foo() functions [AVR32] Fix a couple of sparse warnings [AVR32] Wire up AT73C213 sound driver on ATSTK1000 board [AVR32] Platform code for pata_at32
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'sg' of git://git.kernel.dk/linux-2.6-block: sparc64: zero out dma_length fvr32: fixup dma-mapping for new sg layout sh/sh64: fixup dma-mapping for new sg layout Fix sctp compile m68knommu: remove sg_address() frv: update comment in scatterlist to reflect new setup blackfin: remove sg_address() arm: sg fallout mips: sg_page() fallout alpha: sg_virt() fallout intel-iommu: fix sg_page() parisc: fix sg_page() fallout ide: build fix net: fix xfrm build - missing scatterlist.h include [BLOCK] blk_rq_map_sg: force clear termination bit [BLOCK] Don't clear sg_dma_len/addr() in blk_rq_map_sg() s390 zfcp: sg fixups powerpc: Fix fallout from sg_page() changes IB/ehca: Fix sg_page() fallout arm: build fix
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] version 1.0.15 [ALSA] hda-codec - Fix possible array overflow [ALSA] sound/core/control.c: hard-irq-safe -> hard-irq-unsafe lock warning [ALSA] usb-audio: Another USB mic quirk for Logitech Communicator webcam [ALSA] hda-codec - Fix build without CONFIG_SND_HDA_GENERIC [ALSA] hda-codec - Fix Conexant 5045 volumes [ALSA] hda-codec - Fix conflict of Master volume in STAC92xx codec [ALSA] snd-bt87x: Make the load_all option work correctly [ALSA] protect Dreamcast PCM driver (AICA) from G2 bus effects [ALSA] bt87x - Fix section mismatch [ALSA] hda-codec - Fix AD1986A Lenovo auto-mute [ALSA] This simplifies and fixes waiting loops of the mce_down()
-
Greg Ungerer authored
Reduce the function pointer mess of the m68knommu timer code by calling directly to the local hardware's timer setup, and expose the local common timer interrupt handler to the lower level hardware timer. Ultimately this will save definitions of all these functions across all the platform code to setup the function pointers (which for any given m68knommu CPU family member can be only one set of hardware timer functions). Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
A new style serial driver for the Freescale ColdFire UART to replace the old style one currently in the tree (drivers/serial/mcfserial.c). Currently this UART is only found in the ColdFire CPU family of parts (thus I prefixed this patch [M68KNOMMU]). This has been around for a long while now, tested on all available platforms. Signed-off-by:
-
Greg Ungerer authored
Remove build reference to arch/m68knommu/boot directory, it doesn't exist. Signed-off-by:
-
Greg Ungerer authored
Remove use of undefined symbols CONFIG_TELOS, CONFIG_M68EZ328ADS and CONFIG_ALMA_ANS. Signed-off-by:
-
