- 28 Feb, 2020 12 commits
-
-
Matt Coffin authored
The new interface reads the argument in the call to send the message, so this is no longer needed, and shouldn't be used for concurrency safety reasons. Signed-off-by:
Matt Coffin <mcoffin13@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Matt Coffin authored
Move the responsibility for reading argument registers into the smu_send_smc_msg* implementations, so that adding a message-sending lock to protect the SMU registers will result in the lock still being held when the argument is read. v2: transition smu_v12_0, it's asics, and vega20 Signed-off-by:
-
Hersen Wu authored
dc to pplib interface is changed for navi1x, renoir. display_config_changed is not called by dc anymore. smu_write_watermarks_table is not executed for navi1x, renoir during boot up. solution: call smu_write_watermarks_table just after dc pass watermark clock settings to pplib Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Yintian Tao authored
If we release drm_device before amdgpu_driver_unload_kms, then it will raise the error below. Therefore, we need to place it before amdgpu_driver_unload_kms. [ 43.055736] Memory manager not clean during takedown. [ 43.055777] WARNING: CPU: 1 PID: 2807 at /build/linux-hwe-9KJ07q/linux-hwe-4.18.0/drivers/gpu/drm/drm_mm.c:913 drm_mm_takedown+0x24/0x30 [drm] [ 43.055778] Modules linked in: amdgpu(OE-) amd_sched(OE) amdttm(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic nfit kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm ghash_clmulni_intel snd_seq_midi snd_seq_midi_event pcbc snd_rawmidi snd_seq snd_seq_device aesni_intel snd_timer joydev aes_x86_64 crypto_simd cryptd glue_helper snd soundcore input_leds mac_hid serio_raw qemu_fw_cfg binfmt_misc sch_fq_codel nfsd auth_rpcgss nfs_acl lockd grace sunrpc parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic floppy usbhid psmouse hid i2c_piix4 e1000 pata_acpi [ 43.055819] CPU: 1 PID: 2807 Comm: modprobe Tainted: G OE 4.18.0-15-generic #16~18.04.1-Ubuntu [ 43.055820] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 43.055830] RIP: 0010:drm_mm_takedown+0x24/0x30 [drm] [ 43.055831] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 c7 75 02 f3 c3 55 48 c7 c7 38 33 80 c0 48 89 e5 e8 1c 41 ec d0 <0f> 0b 5d c3 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 [ 43.055857] RSP: 0018:ffffae33c1393d28 EFLAGS: 00010286 [ 43.055859] RAX: 0000000000000000 RBX: ffff9651b4a29800 RCX: 0000000000000006 [ 43.055860] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9651bfc964b0 [ 43.055861] RBP: ffffae33c1393d28 R08: 00000000000002a6 R09: 0000000000000004 [ 43.055861] R10: ffffae33c1393d20 R11: 0000000000000001 R12: ffff9651ba6cb000 [ 43.055863] R13: ffff9651b7f40000 R14: ffffffffc0de3a10 R15: ffff9651ba5c6460 [ 43.055864] FS: 00007f1d3c08d540(0000) GS:ffff9651bfc80000(0000) knlGS:0000000000000000 [ 43.055865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.055866] CR2: 00005630a5831640 CR3: 000000012e274004 CR4: 00000000003606e0 [ 43.055870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 43.055871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 43.055871] Call Trace: [ 43.055885] drm_vma_offset_manager_destroy+0x1b/0x30 [drm] [ 43.055894] drm_gem_destroy+0x19/0x40 [drm] [ 43.055903] drm_dev_fini+0x7f/0x90 [drm] [ 43.055911] drm_dev_release+0x2b/0x40 [drm] [ 43.055919] drm_dev_unplug+0x64/0x80 [drm] [ 43.055994] amdgpu_pci_remove+0x39/0x70 [amdgpu] [ 43.055998] pci_device_remove+0x3e/0xc0 [ 43.056001] device_release_driver_internal+0x18a/0x260 [ 43.056003] driver_detach+0x3f/0x80 [ 43.056004] bus_remove_driver+0x59/0xd0 [ 43.056006] driver_unregister+0x2c/0x40 [ 43.056008] pci_unregister_driver+0x22/0xa0 [ 43.056087] amdgpu_exit+0x15/0x57c [amdgpu] [ 43.056090] __x64_sys_delete_module+0x146/0x280 [ 43.056094] do_syscall_64+0x5a/0x120 v2: put drm_dev_put after pci_set_drvdata Signed-off-by:
Yintian Tao <yttao@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Yintian Tao authored
drm_minor_unregister will invoke drm_debugfs_cleanup to clean all the child node under primary minor node. We don't need to invoke amdgpu_debugfs_fini and amdgpu_debugfs_regs_cleanup to clean agian. Otherwise, it will raise the NULL pointer like below. [ 45.046029] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 45.047256] PGD 0 P4D 0 [ 45.047713] Oops: 0002 [#1] SMP PTI [ 45.048198] CPU: 0 PID: 2796 Comm: modprobe Tainted: G W OE 4.18.0-15-generic #16~18.04.1-Ubuntu [ 45.049538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 45.050651] RIP: 0010:down_write+0x1f/0x40 [ 45.051194] Code: 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 ce d9 ff ff 48 ba 01 00 00 00 ff ff ff ff 48 89 d8 <f0> 48 0f c1 10 85 d2 74 05 e8 53 1c ff ff 65 48 8b 04 25 00 5c 01 [ 45.053702] RSP: 0018:ffffad8f4133fd40 EFLAGS: 00010246 [ 45.054384] RAX: 00000000000000a8 RBX: 00000000000000a8 RCX: ffffa011327dd814 [ 45.055349] RDX: ffffffff00000001 RSI: 0000000000000001 RDI: 00000000000000a8 [ 45.056346] RBP: ffffad8f4133fd48 R08: 0000000000000000 R09: ffffffffc0690a00 [ 45.057326] R10: ffffad8f4133fd58 R11: 0000000000000001 R12: ffffa0113cff0300 [ 45.058266] R13: ffffa0113c0a0000 R14: ffffffffc0c02a10 R15: ffffa0113e5c7860 [ 45.059221] FS: 00007f60d46f9540(0000) GS:ffffa0113fc00000(0000) knlGS:0000000000000000 [ 45.060809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.061826] CR2: 00000000000000a8 CR3: 0000000136250004 CR4: 00000000003606f0 [ 45.062913] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.064404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.065897] Call Trace: [ 45.066426] debugfs_remove+0x36/0xa0 [ 45.067131] amdgpu_debugfs_ring_fini+0x15/0x20 [amdgpu] [ 45.068019] amdgpu_debugfs_fini+0x2c/0x50 [amdgpu] [ 45.068756] amdgpu_pci_remove+0x49/0x70 [amdgpu] [ 45.069439] pci_device_remove+0x3e/0xc0 [ 45.070037] device_release_driver_internal+0x18a/0x260 [ 45.070842] driver_detach+0x3f/0x80 [ 45.071325] bus_remove_driver+0x59/0xd0 [ 45.071850] driver_unregister+0x2c/0x40 [ 45.072377] pci_unregister_driver+0x22/0xa0 [ 45.073043] amdgpu_exit+0x15/0x57c [amdgpu] [ 45.073683] __x64_sys_delete_module+0x146/0x280 [ 45.074369] do_syscall_64+0x5a/0x120 [ 45.074916] entry_SYSCALL_64_after_hwframe+0x44/0xa9 v2: remove all debugfs cleanup/fini code at amdgpu v3: squash in unused variable removal Signed-off-by:
-
Jacob He authored
SPM_VMID is a global resource, SPM access the video memory according to SPM_VMID. The initial valude of SPM_VMID is 0 which is used by kernel. That means UMD can overwrite the memory of VMID0 by enabling SPM, that is really dangerous. Initialize SPM_VMID with 0xf, it messes up other user mode process at most. v2: squash in indentation fix Signed-off-by:
Jacob He <jacob.he@amd.com> Reviewed-by:
-
Emily Deng authored
For vega10 sriov, the register is blocked, use copy data command to fix the issue. v2: Rename amdgpu_kiq_read_clock to gfx_v9_0_kiq_read_clock. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
-
Eric Huang authored
SDMA MQD memory type is NC that causes MQD data overwritten accidentally by an old stable cache line. Changing it to UC default for GART will fix the issue. The mqd_gfx9 parameter is meant for control stacks that are allocated together with user mode queue MQDs. Setting mqd_gfx9 to true maps the control stack pages as NC. Here it was accidentally applied to SDMA MQDs, which are allocated together with the HIQ MQD. Setting the mqd_gfx9 to false avoids that. Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Acked-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yong Zhao authored
Given we can query all the asic specific information from amdgpu_gfx_config, we can make get_tile_config() generic. Signed-off-by:
-
Yong Zhao authored
The two members will be used by KFD later. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.7 UAPI Changes: Cross-subsystem Changes: Core Changes: - bridge: huge rework to get rid of omap_dss custom display drivers Driver Changes: - hisilicon: some fixes related to modes it can deal with / default to - virtio: shmem and gpu context fixes and enhancements - sun4i: Support for LVDS on the A33 Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200227113222.cdwzy4cvcqjtbmou@gilmour.lan
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.7-2020-02-26: amdgpu: - Rework VM update handling in preparation for HMM support - HDCP srm support - PSR fixes - DC watermark fixes - OLED panel support - SR-IOV fixes - BACO fixes - Optimize debugging vram access - RAS fixes - Use BACO for runtime pm - HDCP fixes - XGMI fixes - DDC fixes - DC clock programming optimizations and fixes - PSP fw loading sequence updates - Drop DRIVER_USE_AGP - Remove legacy drm load and unload callbacks amdkfd: - Add runtime pm support radeon: - Drop DRIVER_USE_AGP Signed-off-by:
-
- 27 Feb, 2020 8 commits
-
-
Gurchetan Singh authored
The plan is use have both shmem and virtual "vram" running side-by-side in virtio-gpu. It looks like we'll eventually use struct drm_gem_object as a base class, and we'll need to convert to shmem and vram objects on the fly. As a first step, add a virtio_gpu_is_shmem helper. Thanks to kraxel for suggesting this approach on Gitlab. Suggested-by:
Gerd Hoffman <kraxel@redhat.com> Signed-off-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200227002601.745-3-gurchetansingh@chromium.orgSigned-off-by:
-
Gurchetan Singh authored
This is a very, very minor cleanup. Signed-off-by:
-
Tian Tao authored
use the drm_fb_helper_remove_conflicting_pci_framebuffer to remove the framebuffer initialized by fireware/bootloader to avoid resource conflict. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1582524112-5628-1-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
set the preferred mode resolution to 1024 * 768 and maximum resolution to 1920 * 1200. Signed-off-by:
Gong junjie <gongjunjie2@huawei.com> Signed-off-by:
-
Tian Tao authored
add mode_valid function, we can make sure the resolution is valid. Signed-off-by:
-
Tian Tao authored
The maximum resolution supported by hibmc is 1920 * 1200 instead of 1920 * 1440, this patch fixed this problem Signed-off-by:
-
Tian Tao authored
set the prefer_shadow as 1,so we use the shadowfb to acceleration. Signed-off-by:
-
Tian Tao authored
Add the three new pll config for corresponding resolution 1440x900 and 1600x900, 640x480 for hibmc Signed-off-by:
-
- 26 Feb, 2020 20 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c - Clean up shadow batch after I915_EXEC_SECURE - Drop assertion that active->fence is unchanged Here goes drm-intel-next-2020-02-25: - A backmerge of drm-next solving conflicts on i915/gt/intel_lrc.c - Clean up shadow batch after I915_EXEC_SECURE - Drop assertion that active->fence is unchanged drm-intel-next-2020-02-24-1: - RC6 fixes - Chris - Add extra slice common debug register - Lionel - Align virtual engines uabi_class/instance with i915_drm.h - Tvrtko - Avoid potential division by zero in computing CS timestamp - Chris - Avoid using various globals - Michal Winiarski, Matt Auld - Break up long lists of GEM object reclaim - Chris - Check that the vma hasn't been closed before we insert it - Chris - Consolidate SDVO HDMI force_dvi handling - Ville - Conversion to new logging and warn macros and functions - Pankaj, Wambul, Chris - DC3CO fixes - Jose - Disable use of hwsp_cacheline for kernel_context - Chris - Display IRQ pre/post uninstall refactor - Jani - Display port sync refactor for robustness and fixes - Ville, Manasi - Do not attempt to reprogram IA/ring frequencies for dgfx - Chris - Drop alpha_support for good in favor of force_probe - Jani - DSI ACPI related fixes and refactors - Vivek, Jani, Rajat - Encoder refactor for flexibility to add more information, especiallly DSI related - Jani, Vandita - Engine workarounds refactor for robustness around resue - Daniele - FBC simplification and tracepoints - Various fixes for build - Jani, Kees Cook, Chris, Zhang Xiaoxu - Fix cmdparser - Chris - Fix DRM_I915_GEM_MMAP_OFFFSET - Chris - Fix i915_request flags - Chris - Fix inconsistency between pfit enable and scaler freeing - Stanislav - Fix inverted warn_on on display code - Chris - Fix modeset locks in sanitize_watermarks - Ville - Fix OA context id overlap with idle context id - Umesh - Fix pipe and vblank enable for MST - Jani - Fix VBT handling for timing parameters - Vandita - Fixes o kernel doc - Chris, Ville - Force full modeset whenever DSC is enabled at probe - Jani - Various GEM locking simplification and fixes - Jani , Chris, Jose - Including some changes in preparation for making GEM execbuf parallel - Chris - Gen11 pcode error codes - Matt Roper - Gen8+ interrupt handler refactor - Chris - Many fixes and improvements around GuC code - Daniele, Michal Wajdeczko - i915 parameters improvements sfor flexible input and better debugability - Chris, Jani - Ice Lake and Elkhart Lake Fixes and workarounds - Matt Roper, Jose, Vivek, Matt Atwood - Improvements on execlists, requests and other areas, fixing hangs and also improving hang detection, recover and debugability - Chris - Also introducing offline GT error capture - Chris - Introduce encoder->compute_config_late() to help MST - Ville - Make dbuf configuration const - Jani - Few misc clean ups - Ville, Chris - Never allow userptr into the new mapping types - Janusz - Poison rings after use and GTT scratch pages - Chris - Protect signaler walk with RCU - Chris - PSR fixes - Jose - Pull sseu context updates under gt - Chris - Read rawclk_freq earlier - Chris - Refactor around VBT handling to allow geting information through the encoder - Jani - Refactor l3cc/mocs availability - Chris - Refactor to use intel_connector over drm_connector - Ville - Remove i915_energy_uJ from debugfs - Tvrtko - Remove lite restore defines - Mika Kuoppala - Remove prefault_disable modparam - Chris - Many selftests fixes and improvements - Chris - Set intel_dp_set_m_n() for MST slaves - Jose - Simplify hot plug pin handling and other fixes around pin and polled modes - Ville - Skip CPU synchronization on dma-buf attachments - chris - Skip global serialization of clear_range for bxt vtd - Chris - Skip rmw for marked register - Chris - Some other GEM Fixes - Chris - Some small changes for satisfying static code analysis - Colin, Chris - Suppress warnings for unused debugging locals - Tiger Lake enabling, including re-enable -f RPS, workarounds and other display fixes and changes - Chris, Matt Roper, Mika Kuoppala, Anshuman, Jose, Radhakrishna, Rafael. - Track hw reported context runtime - Tvrtko - Update bug filling URL - Jani - Use async bind for PIN_USER into bsw/bxt ggtt - Chris - Use the kernel_context to measuer the breadcrumb size - Chris - Userptr fixes and robustness for big pages - Matt Auld - Various Display refactors and clean-ups, specially around logs and use of drm_i915_private - Jani, Ville - Various display refactors and fixes, especially around cdclk, modeset, and encoder - Chris, Jani - Various eDP/DP fixes around DPCD - Lyude - Various fixes and refactors for better Display watermark handling - Ville, Stanislav - Various other display refactors - Ville - Various refactor for better handling of display plane states - Ville - Wean off drm_pci_alloc/drm_pci_free - Chris - Correctly terminate connector iteration- Ville - Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgtt - Chris Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: - crtc: Drop get_crtc callback - dp: Add support for DP1.4 EDID corruption test - edid: Improve CEA detailed timings support - format-helper: Move to a GPL2/MIT dual license - mode: Drop drm_display_mode.private - vblank: Convert drm-driver vblank related code to CRTC equivalents and cleanup the core. - drm_global_mutex reworks Driver Changes: - hibmc: Add gamma_set support and improve DPMS support - pl111: Support Integrator IM-PD1 - sun4i: LVDS support for the A20, improvements to panel handling in DSI - virtio: job batching improvements, mem handling code rework - panel: Support for Rocktech RK101II01D-CT - bridge: Support for ADV7535, tc358768, improvements to ti-sn65dsi86 Signed-off-by: -
Alex Deucher authored
We've moved the debugfs handling into a centralized place so we can remove the legacy load an unload callbacks. Tested-by:
-
Alex Deucher authored
Nothing else calls it. Not sure it's necessary. v2: remove unused port variable. Reviewed-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Alex Deucher authored
Split into init and register functions to avoid a segfault in some configs when the load/unload callbacks are removed. v2: - add back accidently dropped has_aux setting - set dev in late_register v3: - fix dp cec ordering v4: - squash in kdev reference fix Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
-
Alex Deucher authored
To handle debugfs setup on non DP MST connectors. Tested-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
-
Alex Deucher authored
Into the function that creates the debugfs files rather than setting them explicitly in the callers. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for display. v2: add config guard for DC Tested-by:
-
Alex Deucher authored
The core does this for us now. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for rings. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for firmware. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for register access files. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for gem. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for fence handling. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for SA (sub allocator). Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for pm. Tested-by:
-
Alex Deucher authored
In order to remove the load and unload drm callbacks, we need to reorder the init sequence to move all the drm debugfs file handling. Do this for ttm. Tested-by:
-
Alex Deucher authored
to amdgpu_debugfs_fini. It will be used for other things in the future. Tested-by:
-
Yong Zhao authored
Since emulators are slower, sometime some operations like flushing tlb through FM need more than twice the regular timout of 100ms, so increase the timeout to 1s on emulators. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Hawking Zhang authored
This is the callback function that is going to be invoked when amdgpu_dpm_set_df_cstate is called to toggle DFCstate Signed-off-by:
-
