Just a single fix for sparse/smatch warnings introduced by the previous
vmwgfx-next pull.

* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix recently introduced sparse / smatch warnings and errors

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrant <jakob@vmware.com>

New tree with the INFO ioctl merge fixed up.  This also adds a couple
of additional minor fixes.

A few more changes for 3.14, mostly just bug fixes.  Note that:
drm/radeon: add query to fetch the max engine clock.
will conflict with 3.13 final, but the fix is pretty obvious.

* 'drm-next-3.14' of git://people.freedesktop.org/~agd5f/linux: (22 commits)
  drm/radeon: add UVD support for OLAND
  drm/radeon: fix minor typos in si_dpm.c
  drm/radeon: set the full cache bit for fences on r7xx+
  drm/radeon: fix surface sync in fence on cayman (v2)
  drm/radeon/dpm: disable mclk switching on desktop RV770
  drm/radeon: fix endian handling in radeon_atom_init_mc_reg_table
  drm/radeon: write gfx pg bases even when gfx pg is disabled
  drm/radeon: bail early from enable ss in certain cases
  drm/radeon: handle ss percentage divider properly
  drm/radeon: add query to fetch the max engine clock (v2)
  drm/radeon/dp: sleep after powering up the display
  drm/radeon/dp: use usleep_range rather than udelay
  drm/radeon/dp: bump i2c-over-aux retries to 7
  drm/radeon: disable ss on DP for DCE3.x
  drm/radeon/cik: use hw defaults for TC_CFG registers
  drm/radeon: disable dpm on BTC
  drm/radeon/cik: use WAIT_REG_MEM special op for CP HDP flush
  drm/radeon/cik: use POLL_REG_MEM special op for sDMA HDP flush
  drm/radeon: consolidate sdma hdp flushing code for CIK
  drm/radeon: consolidate cp hdp flushing code for CIK
  ...

It seems this got dropped when we merged UVD support
last year.  Add this back now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Copy/paste typos from the ni code. Should not
have any functional change.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Needed to properly flush the read caches for fences.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We need to set the engine bit to select the ME and
also set the full cache bit.  Should help stability
on TN and cayman.

V2: fix up surface sync in ib execute as well
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Mclk switching doesn't seem to work reliably on these
cards.  Most RV770 boards specify the same mclk for all
performance levels anyway so in most cases, this has
no affect.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73067Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to swap the data for big endian.
Notcied by sylware in IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For consistency.  These buffers aren't used when pg is
disabled.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If the ss percentage is 0 or we are using external ss,
just bail when enabling ss.  We disable it explicitly
earlier in the modeset already.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's either 100 or 1000 depending on the flags in the
table.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is needed for reporting the max GPU engine clock
in OpenCL.  This just reports the max possible engine
clock, it does not take into account current conditions
that may limit that clock.

v2: fix query number for merge with 3.13
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

According to the DP 1.1 spec, the sink must power
up within 1ms.  Noticed while reviewing Thierry's
drm/dp patches.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Based on common dp code proposed by Thierry Reding.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As per the DP1.2 spec.  Noticed while reviewing
Thierry's drm/dp patches. Also bump native aux
retries to 7 for consistency.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Seems to cause problems with certain DP monitors.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=40699Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use the hw power up values rather than 0.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Still unstable on some boards.

Bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73053
https://bugzilla.kernel.org/show_bug.cgi?id=68571Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: 3.13 <stable@vger.kernel.org> # 3.13

This is the preferred flushing method on CIK.

Note, this only works on the PFP so the engine bit must be
set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is the preferred flushing method on CIK.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's used in several places so move to a common shared
function.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's used in several places so move to a common shared
function.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 99b4f251.

Semaphores work fine after further review and testing.
Cc: 3.13 <stable@vger.kernel.org> # 3.13

drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
  (but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over

Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
  drm/i915/bdw: make sure south port interrupts are enabled properly v2
  drm/i915: Include more information in disabled hotplug interrupt warning
  drm/i915: Only complain about a rogue hotplug IRQ after disabling
  drm/i915: Only WARN about a stuck hotplug irq ONCE
  drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/

Pull request of 2014-01-17

Pull request for 3.14. One not so urgent fix, One huge device update.

The pull request corresponds to the patches sent out on dri-devel, except:
[PATCH 02/33], review tag typo pointed out by Matt Turner.
[PATCH 04/33], dropped. The new surface formats are never used.

The upcoming vmware svga2 hardware version 11 will introduce the concept
of "guest backed objects" or -resources. The device will in principle
get all
of its memory from the guest, which has big advantages from the device
point of view.

This means that vmwgfx contexts, shaders and surfaces need to be backed
by guest memory in the form of buffer objects called MOBs, presumably
short for MemoryOBjects, which are bound to the device in a special way.

This patch series introduces guest backed object support. Some new IOCTLs
are added to allocate these new guest backed object, and to optionally
provide
them with a backing MOB.

There is an update to the gallium driver that comes with this update, and
it will be pushed in the near timeframe presumably to a separate mesa branch
before merged to master.

* tag 'vmwgfx-next-2014-01-17' of git://people.freedesktop.org/~thomash/linux: (33 commits)
  drm/vmwgfx: Invalidate surface on non-readback unbind
  drm/vmwgfx: Silence the device command verifier
  drm/vmwgfx: Implement 64-bit Otable- and MOB binding v2
  drm/vmwgfx: Fix surface framebuffer check for guest-backed surfaces
  drm/vmwgfx: Update otable definitions
  drm/vmwgfx: Use the linux DMA api also for MOBs
  drm/vmwgfx: Ditch the vmw_dummy_query_bo_prepare function
  drm/vmwgfx: Persistent tracking of context bindings
  drm/vmwgfx: Track context bindings and scrub them upon exiting execbuf
  drm/vmwgfx: Block the BIND_SHADERCONSTS command
  drm/vmwgfx: Add a parameter to get max MOB memory size
  drm/vmwgfx: Implement a buffer object synccpu ioctl.
  drm/vmwgfx: Make sure that the multisampling is off
  drm/vmwgfx: Extend the command verifier to handle guest-backed on / off
  drm/vmwgfx: Fix up the vmwgfx_drv.h header for new files
  drm/vmwgfx: Enable 3D for new hardware version
  drm/vmwgfx: Add new unused (by user-space) commands to the verifier
  drm/vmwgfx: Validate guest-backed shader const commands
  drm/vmwgfx: Add guest-backed shaders
  drm/vmwgfx: Hook up guest-backed surfaces
  ...

Fixes error messages in vmware.log
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

The device and kernel module disagrees about the command length of
some commands. More pack attributes might be needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Adds the relevant commands to the device interface header and
implements 64-bit binding for 64 bit VMs.

v2: Uppercase command IDs, Correctly use also 64 bit page tables.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

With guest-backed surfaces, surface->sizes == NULL, causing a kernel oops.
Use the base_size member instead.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Update otable definitions and modify the otable setup code
accordingly.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Combine it with vmw_dummy_query_bo_create, and also make sure
we use tryreserve when reserving the bo to avoid any lockdep warnings
We are sure the tryreserve will always succeed since we are
the only users at that point.
In addition, allow the vmw_bo_pin function to pin/unpin system memory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Only scrub context bindings when a bound resource is destroyed, or when
the MOB backing the context is unbound.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>

The device is no longer capable of scrubbing context bindings of resources
that are bound when destroyed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

It's been deprecated.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Also bump minor to signal a GB-aware kernel module
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>

This ioctl enables inter-process synchronization of buffer objects,
which is needed for mesa Guest-Backed objects.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

By default SVGA device creates nonmaskable multisampling surfaces, in
which case multisampleCount of 1 means: the first quality setting
of nonmaskable multisampling surface. Lets change it to make sure
that the backends know that multisampling is really off.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>