- 06 Nov, 2018 1 commit
-
-
Eric Anholt authored
This broke rendering on V3D, where we almost always have a 0 in-syncobj. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 48197bc5 ("drm: add syncobj timeline support v9") Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.kernel.org/patch/10669317/Signed-off-by:
-
- 05 Nov, 2018 22 commits
-
-
Imre Deak authored
Fix typo in struct field initializer. Fixes: 3a6eb795 ("drm/vgem: create a render node for vgem") Cc: Emil Velikov <emil.velikov@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105145428.5590-1-imre.deak@intel.com
-
Emil Velikov authored
VGEM doesn't do anything modeset specific, so in a way exposing a primary node is 'wrong'. At the same time, we extensively use if for creating dumb buffers, fences, prime fd <> handle imports/exports. To the point that we explicitly annotate the vgem fence ioctls as DRM_RENDER_ALLOW and have an IGT test which opens the render node. close(drm_open_driver_render(DRIVER_VGEM)) Better late than never, let's flip the switch. Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181026120647.7528-1-emil.l.velikov@gmail.com
-
Icenowy Zheng authored
The TCON TOP on Allwinner H6 SoC is a cut down version of the R40 TCON TOP, which dropped TCON_TV1 and DSI (which do not exist on H6). Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-27-jernej.skrabec@siol.net
-
Icenowy Zheng authored
Allwinner H6 SoC has a cut down version of TCON TOP. Add binding documentation for it. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Icenowy Zheng authored
Some SoCs, such as H6, doesn't have a full-featured TCON TOP. Add quirks support for TCON TOP. Currently the presence of TCON_TV1 and DSI is controlled via the quirks structure. Acked-by:
-
Jernej Skrabec authored
It turns out that TCON TOP registers in H6 SoC have non-zero reset value. This may cause issues if bits are not changed during configuration. To prevent that, initialize registers to 0. Signed-off-by:
-
Jernej Skrabec authored
H6 has Synopsys DWC HDMI 2.0 TX PHY. There is no freely available documentation for it, only code found in BSP kernel. However, judging by the code, PHY is very similar to older Synopsys HDMI PHY described in i.MX6 documentation. Most registers seem to be the same. According to i.MX6 documentation, mpll settings are based on pixel clock and are not specific to each SoC. Because of that, mpll table in this commit is based on that documentation and not on BSP code. Other PHY settings were derived from BSP PHY driver code. Signed-off-by:
-
Jernej Skrabec authored
Currently sun8i-hdmi-phy driver supports only custom PHYs connected to DW HDMI controller. Since newest Allwinner SoCs have unmodified Synopsys PHY, driver has to be reorganized to support them. Variant structure is expanded to allow differentiation between custom and Sysnopsys PHYs and to hold Synopsys PHY settings. Since DW HDMI bridge platform data has different fields for custom and Sysnopsys PHY, function sun8i_hdmi_phy_get_ops() is replaced with sun8i_hdmi_phy_set_ops(). Signed-off-by:
-
Jernej Skrabec authored
Currently, quirks and compatibles are sorted alphabetically. However, they should be sorted by family release date and then alphabetically. Fix that by moving A64 quirks and compatible to bottom. No functional change is made. Signed-off-by:
-
Jernej Skrabec authored
H6 has DW HDMI 2.0b controller v2.12a. It supports 4K at 60 Hz and HDCP 2.2. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Icenowy Zheng authored
The Allwinner H6 SoC uses a v2.12a DesignWare HDMI controller, with dedicated CEC and HDCP clocks added; the PHY connected is a standard DesignWare HDMI PHY. Add binding for it. Reviewed-by:
-
Jernej Skrabec authored
It turns out that H6 HDMI BSP kernel driver doesn't change TMDS rate at all. At this point it is not clear whether it is just not necessary or it would cause some kind of issues. Add a quirk for it. Acked-by:
-
Jernej Skrabec authored
Since it is not possible to access sun8i-dw-hdmi driver private data inside mode_valid function, make it configurable. That way different versions of HDMI controllers can set different function, depending on it's limitations. Reviewed-by:
-
Jernej Skrabec authored
Currently supported Allwinner SoCs with DW HDMI controller have scrambled addresses and read lock. However, that is not true in general. For example, A80 and H6 have normal addresses and normal read access. Move code for unscrambling addresses and unlocking read access to it's own function and call it from init function. Reviewed-by:
-
Jernej Skrabec authored
It turns out that even new DW HDMI controllers exhibits same magenta line issues as older versions. Enable workaround for v2.12a. Reviewed-by:
-
Jernej Skrabec authored
Mixer 0 has 1 VI and 3 UI planes, scaler on all planes and can output 4K image @60Hz. It also support 10 bit colors, which are not yet implemented. Reviewed-by:
-
Jernej Skrabec authored
Display Engine 3 is an upgrade of DE2 with new features like support for 10 bit color formats and support for AFBC. Most of DE2 code works with DE3, except some small details. Implement basic support for DE3. Support for 10 bit colort formats and AFBC, among others missing features, will be added later. Signed-off-by:
-
Jernej Skrabec authored
Some sub-engines are unused. Disable them explicitly. Signed-off-by:
-
Jernej Skrabec authored
DE2 mixer is always 0x6000 bytes in size on all known SoCs. While at it, introduce a macro for that. Signed-off-by:
-
Jernej Skrabec authored
Most, if not all, registers found in DE2 still exists in DE3. However, units are on different base addresses. To prepare for addition of DE3 support, registers macros are reworked so they take base address as parameter. Signed-off-by:
-
Jernej Skrabec authored
This commit adds compatibles used in H6 display pipeline, namely for display engine, mixer and TV TCON. H6 display engine is somewhat similar to R40, just less TCONs and mixer support more features. Reviewed-by:
-
Icenowy Zheng authored
The Allwinner H6 DE3 bus is similar to the A64 DE2 one. Add its compatible string with the A64 string as fallback to the binding. Some description of the binding is modified to make it more generic. Reviewed-by:
-
- 02 Nov, 2018 10 commits
-
-
Daniel Vetter authored
Leases are entirely implemented within drm.ko, no need to even tempt drivers into doing nasty things. And if there's really a need, we can always re-export these again. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102143107.25722-1-daniel.vetter@ffwll.ch
-
Alexandru-Cosmin Gheorghe authored
It seems for some random configuration drm_device is bigger than 2048 bytes. The fix is to make the mock objects static variables. Bug reported by 0-DAY Kernel test infrastructure here: https://lists.01.org/pipermail/kbuild-all/2018-November/054431.html Fixes: 6ff3d9ff ("drm/selftests: Add tests for drm_internal_framebuffer_create") Signed-off-by:
Alexandru-Cosmin Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102130103.7753-1-alexandru-cosmin.gheorghe@arm.com
-
Alexandru Gheorghe authored
Add tests that verify that drm_internal_framebuffer_create creates buffers correctly by creating a dummy drm_device with a mock function for the fb_create callback. To decide if a buffer has been created or not it just checks if fb_create callback has been called for the particular drm_mode_fb_cmd2 that's being tested. Reviewed-by:
-
Alexandru Gheorghe authored
If we want to be able to write drmselftests for non-static core functions that are not intended to be used by drivers we need this functions to be exported. This adds a macro that is tied of CONFIG_DRM_DEBUG_SELFTEST, and uses that to export drm_internal_framebuffer_create, in order for subsequent patches to be able to test it. Reviewed-by:
-
Alexandru Gheorghe authored
Add selftests for the following newly added functions: - drm_format_info_block_width - drm_format_info_block_height - drm_format_info_min_pitch Reviewed-by:
-
Alexandru Gheorghe authored
For formats that are supported only with non-linear modifiers it doesn't make to much sense to define cpp or char_per_block, so that will be set to 0. This patch adds a restriction to force having a modifier attached when cpp/char_per_block is 0, and to bypass checking the pitch restriction. This had been discussed here. [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&highlight_names=&date=2018-09-13&show_html=trueReviewed-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
-
Alexandru Gheorghe authored
Enable the following formats - DRM_FORMAT_X0L0: DP650 - DRM_FORMAT_X0L2: DP550, DP650 Reviewed-by:
-
Alexandru Gheorghe authored
Mali-DP implements a number of tiled yuv formats which are not currently described in drm_fourcc.h. This adds those definitions and describes their memory layout by using the newly added char_per_block, block_w, block_h. Reviewed-by:
-
Alexandru Gheorghe authored
For some pixel formats .cpp structure in drm_format info it's not enough to describe the peculiarities of the pixel layout, for example tiled formats or packed formats at bit level. What's implemented here is to add three new members to drm_format_info that could describe such formats: - char_per_block[3] - block_w[3] - block_h[3] char_per_block will be put in a union alongside cpp, for transparent compatibility with the existing format descriptions. Regarding, block_w and block_h they are intended to be used through their equivalent getters drm_format_info_block_width / drm_format_info_block_height, the reason of the getters is to abstract the fact that for normal formats block_w and block_h will be unset/0, but the methods will be returning 1. Additionally, convenience function drm_format_info_min_pitch had been added that computes the minimum required pitch for a given pixel format and buffer width. Using that the following drm core functions had been updated to generically handle both block and non-block formats: - drm_fb_cma_get_gem_addr: for block formats it will just return the beginning of the block. - framebuffer_check: Use the newly added drm_format_info_min_pitch. - drm_gem_fb_create_with_funcs: Use the newly added drm_format_info_min_pitch. - In places where is not expecting to handle block formats, like fbdev helpers I just added some warnings in case the block width/height are greater than 1. Changes since v3: - Add helper function for computing the minimum required pitch. - Improve/cleanup documentation Changes since v8: - Fixed build on 32bits arm architectures, with: - return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane], + return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane], Reviewed-by:
-
Linus Walleij authored
Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org
-
- 01 Nov, 2018 7 commits
-
-
Shayenne da Luz Moura authored
Break line after NULL to decrease the line size. Signed-off-by:
Shayenne da Luz Moura <shayenneluzmoura@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Jyri Sarha <jsarha@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-9-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-7-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-3-noralf@tronnes.org
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-2-noralf@tronnes.org
-
Chris Wilson authored
drivers/gpu/drm/drm_syncobj.c:181:6: warning: no previous prototype for ‘drm_syncobj_add_callback’ [-Wmissing-prototypes] drivers/gpu/drm/drm_syncobj.c:190:6: warning: no previous prototype for ‘drm_syncobj_remove_callback’ [-Wmissing-prototypes] Fixing that leads to drivers/gpu/drm/drm_syncobj.c:181:13: warning: ‘drm_syncobj_add_callback’ defined but not used [-Wunused-function] so remove the unused drm_syncobj_add_callback() entirely. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181031120710.21582-1-chris@chris-wilson.co.ukReviewed-by:
-
