- 13 Feb, 2012 40 commits
-
-
Andreas Herrmann authored
commit 201bf0f1 upstream. Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Axel Lin authored
commit b5266ea6 upstream. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Dan Magenheimer authored
commit 9256a478 upstream. I discovered this deadlock condition awhile ago working on RAMster but it affects zcache as well. The list spinlock must be locked prior to the page spinlock and released after. As a result, the page copy must also be done while the locks are held. Applies to 3.2. Konrad, please push (via GregKH?)... this is definitely a bug fix so need not be pushed during a -rc0 window. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Dan Magenheimer authored
commit e8b45534 upstream. SWIZ_BITS > 8 results in a much larger number of "tmem_obj" allocations, likely one per page-placed-in-frontswap. The tmem_obj is not huge (roughly 100 bytes), but it is large enough to add a not-insignificant memory overhead to zcache. The SWIZ_BITS=8 will get roughly the same lock contention without the space wastage. The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is the number of unique oids that be generated" (This concept is limited to frontswap's use of tmem). Acked-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Rui li authored
commit 1608ea5f upstream. As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Signed-off-by:
-
Milan Kocian authored
commit 90451e69 upstream. Signed-off-by:
Milan Kocian <milon@wq.cz> Signed-off-by:
-
Jayachandran C authored
commit e4436a7c upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by:
Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Timo Juhani Lindfors authored
commit 683da59d upstream. ab943a2e (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Signed-off-by:
Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Kuninori Morimoto authored
commit 9c0a835a upstream. The usb/ch9.h will be installed to /usr/include/linux, and be used from user space. But le16_to_cpu() is only defined for kernel code. Without this patch, user space compile will be broken. Special thanks to Stefan Becker Reported-by:
Stefan Becker <chemobejk@gmail.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Larry Finger authored
commit 8c213fa5 upstream. In https://bugs.archlinux.org/task/27996, failure of driver r8712u is reported, with a timeout during module loading due to synchronous loading of the firmware. The code now uses request_firmware_nowait(). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 1793bf1d upstream. Add USB ID for SITECOM WLA-1000 V1 001 WLAN Reported-and-tested-by:
Roland Gruber <post@rolandgruber.de> Reported-and-tested-by:
Dario Lucia <dario.lucia@gmail.com> Signed-off-by:
-
Pekka Paalanen authored
commit 3589e745 upstream. Asus_oled triggers the following bug on module unloading: usbcore: deregistering interface driver asus-oled BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff8111292b>] sysfs_delete_link+0x30/0x66 Call Trace: [<ffffffff81225373>] device_remove_class_symlinks+0x6b/0x70 [<ffffffff812256a8>] device_del+0x9f/0x1ab [<ffffffff812257c5>] device_unregister+0x11/0x1e [<ffffffffa000cb82>] asus_oled_disconnect+0x4f/0x9e [asus_oled] [<ffffffff81277430>] usb_unbind_interface+0x54/0x103 [<ffffffff812276c4>] __device_release_driver+0xa2/0xeb [<ffffffff81227794>] driver_detach+0x87/0xad [<ffffffff812269e9>] bus_remove_driver+0x91/0xc1 [<ffffffff81227fb4>] driver_unregister+0x66/0x6e [<ffffffff812771ed>] usb_deregister+0xbb/0xc4 [<ffffffffa000ce87>] asus_oled_exit+0x2f/0x31 [asus_oled] [<ffffffff81068365>] sys_delete_module+0x1b8/0x21b [<ffffffff810ae3de>] ? do_munmap+0x2ef/0x313 [<ffffffff813699bb>] system_call_fastpath+0x16/0x1b This is due to an incorrect destruction sequence in asus_oled_exit(). Fix the order, fixes the bug. Tested on an Asus G50V laptop only. Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by:
Pekka Paalanen <pq@iki.fi> Signed-off-by:
-
Pekka Paalanen authored
commit 635032cb upstream. Programming an image was broken, because odev->buf_offs was not advanced for val == 0 in append_values(). This regression was introduced in: commit 1ff12a4a Author: Kevin A. Granade <kevin.granade@gmail.com> Date: Sat Sep 5 01:03:39 2009 -0500 Staging: asus_oled: Cleaned up checkpatch issues. Fix the image processing by special-casing val == 0. I have tested this change on an Asus G50V laptop only. Cc: Jakub Schmidtke <sjakub@gmail.com> Cc: Kevin A. Granade <kevin.granade@gmail.com> Signed-off-by:
-
Roland Dreier authored
commit bf005355 upstream. My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Roland Dreier authored
commit bb1acb2e upstream. My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by:
-
Nicholas Bellinger authored
commit 91ec1d35 upstream. This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by:
-
Roland Dreier authored
commit 9fbc8909 upstream. According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by:
-
Marco Sanvido authored
commit 6816966a upstream. Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by:
Marco Sanvido <marco@purestorage.com> Signed-off-by:
-
Marco Sanvido authored
commit 9e08e34e upstream. The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by:
-
Hugh Dickins authored
commit b9980cdc upstream. Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false, and so triggers some BUGs in Transparent HugePage codepaths. asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x); but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE, VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mel Gorman authored
commit dc908600 upstream. When isolating pages for migration, migration starts at the start of a zone while the free scanner starts at the end of the zone. Migration avoids entering a new zone by never going beyond the free scanned. Unfortunately, in very rare cases nodes can overlap. When this happens, migration isolates pages without the LRU lock held, corrupting lists which will trigger errors in reclaim or during page free such as in the following oops BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450 PGD 1dda554067 PUD 1e1cb58067 PMD 0 Oops: 0000 [#1] SMP CPU 37 Pid: 17088, comm: memcg_process_s Tainted: G X RIP: free_pcppages_bulk+0xcc/0x450 Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0) Call Trace: free_hot_cold_page+0x17e/0x1f0 __pagevec_free+0x90/0xb0 release_pages+0x22a/0x260 pagevec_lru_move_fn+0xf3/0x110 putback_lru_page+0x66/0xe0 unmap_and_move+0x156/0x180 migrate_pages+0x9e/0x1b0 compact_zone+0x1f3/0x2f0 compact_zone_order+0xa2/0xe0 try_to_compact_pages+0xdf/0x110 __alloc_pages_direct_compact+0xee/0x1c0 __alloc_pages_slowpath+0x370/0x830 __alloc_pages_nodemask+0x1b1/0x1c0 alloc_pages_vma+0x9b/0x160 do_huge_pmd_anonymous_page+0x160/0x270 do_page_fault+0x207/0x4c0 page_fault+0x25/0x30 The "X" in the taint flag means that external modules were loaded but but is unrelated to the bug triggering. The real problem was because the PFN layout looks like this Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x01e80000 Movable zone start PFN for each node early_node_map[14] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x0007a1ec 0: 0x0007a354 -> 0x0007a379 0: 0x0007f7ff -> 0x0007f800 0: 0x00100000 -> 0x00680000 1: 0x00680000 -> 0x00e80000 0: 0x00e80000 -> 0x01080000 1: 0x01080000 -> 0x01280000 0: 0x01280000 -> 0x01480000 1: 0x01480000 -> 0x01680000 0: 0x01680000 -> 0x01880000 1: 0x01880000 -> 0x01a80000 0: 0x01a80000 -> 0x01c80000 1: 0x01c80000 -> 0x01e80000 The fix is straight-forward. isolate_migratepages() has to make a similar check to isolate_freepage to ensure that it never isolates pages from a zone it does not hold the LRU lock for. This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x and current mainline. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Joerg Roedel authored
commit 05df1f3c upstream. Error handling in msm_iommu_unmap() is broken. On some error conditions retval is set to a non-zero value which causes the function to return 'len' at the end. This hides the error from the user. Zero should be returned in those error cases. Cc: David Brown <davidb@codeaurora.org> Cc: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Acked-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
-
Joerg Roedel authored
commit af1be049 upstream. On some systems the IVRS table does not contain all PCI devices present in the system. In case a device not present in the IVRS table is translated by the IOMMU no DMA is possible from that device by default. This patch fixes this by removing the DTE entry for every PCI device present in the system and not covered by IVRS. Signed-off-by:
-
Clemens Ladisch authored
commit 2492250e upstream. The driver accidentally exchanged the left/right fields for stereo AC'97 mixer registers. This affected only the aux and CD inputs because the line input bypasses the AC'97 codec and the mic input is mono; cards without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected. Reported-and-tested-by:
Abby Cedar <abbycedar@yahoo.com.au> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Russell King authored
commit 025e4ab3 upstream. This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e798 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Mark Brown authored
commit f647e152 upstream. The VMID ramp rate is supposed to be 0x3, not 11b. Fix that. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit db966f8a upstream. We can enable VMID independently of the bias in some use cases so we need to ensure that the core device is powered up. Signed-off-by:
-
Susan Gao authored
commit 2b6712b1 upstream. Signed-off-by:
Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit 43b6cec2 upstream. The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by:
-
Mark Brown authored
commit ee76744c upstream. IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1 and IN2 to LINEOUT2. Signed-off-by:
-
Nicholas Bellinger authored
commit 2f9bc894 upstream. This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by:
Dax Kelson <dkelson@gurulabs.com> Reported-by:
Andy Grover <agrover@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nicholas Bellinger authored
commit cd931ee6 upstream. This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Signed-off-by:
-
Nicholas Bellinger authored
commit c1ce4bd5 upstream. This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98 [ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98 [ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57 [ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85 [ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10 [ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13 Reported-by: <jrepac@yahoo.com> Signed-off-by:
-
Ben Hutchings authored
commit 9ec84ace upstream. We do want to allow lock debugging for GPL-compatible modules that are not (yet) built in-tree. This was disabled as a side-effect of commit 2449b8ba ('module,bug: Add TAINT_OOT_MODULE flag for modules not built in-tree'). Lock debug warnings now include taint flags, so kernel developers should still be able to deflect warnings caused by out-of-tree modules. The TAINT_PROPRIETARY_MODULE flag for non-GPL-compatible modules will still disable lock debugging. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Dave Jones <davej@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Debian kernel maintainers <debian-kernel@lists.debian.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/1323268258.18450.11.camel@deadeyeSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Peter Zijlstra authored
commit df754e6a upstream. It's unlikely that TAINT_FIRMWARE_WORKAROUND causes false lockdep messages, so do not disable lockdep in that case. We still want to keep lockdep disabled in the TAINT_OOT_MODULE case: - bin-only modules can cause various instabilities in their and in unrelated kernel code - they are impossible to debug for kernel developers - they also typically do not have the copyright license permission to link to the GPL-ed lockdep code. Suggested-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-xopopjjens57r0i13qnyh2yo@git.kernel.orgSigned-off-by:
-
Hubert Feurstein authored
commit 9f106503 upstream. An error was existing in the saving of CONTRAST_CTR register across suspend/resume. Signed-off-by:
Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Shirish Pargaonkar authored
commit de47a417 upstream. For null user mounts, do not invoke string length function during session setup. Reported-and-Tested-by:
Chris Clayton <chris2553@googlemail.com> Acked-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Guenter Roeck authored
commit 585c0fd8 upstream. NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of chip register bits. Check that second set of bits in addition to the first set to detect if fans 3..5 are monitored. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Li Wang authored
commit 684a3ff7 upstream. ecryptfs_write() can enter an infinite loop when truncating a file to a size larger than 4G. This only happens on architectures where size_t is represented by 32 bits. This was caused by a size_t overflow due to it incorrectly being used to store the result of a calculation which uses potentially large values of type loff_t. [tyhicks@canonical.com: rewrite subject and commit message] Signed-off-by:
Li Wang <liwang@nudt.edu.cn> Signed-off-by:
Yunchuan Wen <wenyunchuan@kylinos.com.cn> Reviewed-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Daniel Vetter authored
commit 9f1f46a4 upstream. The problem this patch solves is that the forcewake accounting necessary for register reads is protected by dev->struct_mutex. But the hangcheck and error_capture code need to access registers without grabbing this mutex because we hold it while waiting for the gpu. So a new lock is required. Because currently the error_state capture is called from the error irq handler and the hangcheck code runs from a timer, it needs to be an irqsafe spinlock (note that the registers used by the irq handler (neglecting the error handling part) only uses registers that don't need the forcewake dance). We could tune this down to a normal spinlock when we rework the error_state capture and hangcheck code to run from a workqueue. But we don't have any read in a fastpath that needs forcewake, so I've decided to not care much about overhead. This prevents tests/gem_hangcheck_forcewake from i-g-t from killing my snb on recent kernels - something must have slightly changed the timings. On previous kernels it only trigger a WARN about the broken locking. v2: Drop the previous patch for the register writes. v3: Improve the commit message per Chris Wilson's suggestions. Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
