There are no more users relying on blk-mq request states to prevent
double completions, so replace the relatively expensive cmpxchg operation
with WRITE_ONCE.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The scsi timeout error handling had been directly updating the block
layer's request state to prevent a error handling and a natural completion
from completing the same request twice. Fix this layering violation
by having scsi control the fate of its commands with scsi owned flags
rather than use blk-mq's.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A driver may have internal state to cleanup if we're pretending a request
didn't complete. Return 'false' if the command wasn't actually completed
due to the timeout error injection, and true otherwise.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's pointless to do so, we are by definition on the CPU we want/need
to be, as that's the one waiting for a completion event.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Right now we immediately bail if need_resched() is true, but
we need to do at least one loop in case we have entries waiting.
So just invert the need_resched() check, putting it at the
bottom of the loop.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.

Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It doesn't set HIPRI on the bio, so polling for it is pretty silly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We always pass in -1 now and none of the callers use the tag value,
remove the parameter.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we want to support async IO polling, then we have to allow finding
completions that aren't just for the one we are looking for. Always pass
in -1 to the mq_ops->poll() helper, and have that return how many events
were found in this poll loop.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.

This patch fixes the issue by the following approach:

1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs

2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj

3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.

This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If the first request allocated and issued by a process is a passhthrough
request, we don't set up an IO context for it. Ensure that
blk_mq_sched_assign_ioc() ignores a NULL io_context.

Fixes: e2b3fa5a ("block: Remove bio->bi_ioc")
Reported-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For the synchronous I/O path case (read(), write() etc system calls), a
BIO I/O priority is not initialized until the execution of
blk_init_request_from_bio() when the BIO is submitted and a request
initialized for the BIO execution. This is due to the ki_ioprio field of
the struct kiocb defined on stack being always initialized to
IOPRIO_CLASS_NONE, regardless of the calling process I/O context ioprio
value set with ioprio_set(). This late initialization can result in the
BIO being merged to pending requests even when the I/O priorities
differ.

Fix this by initializing the ki_iopriority field of on stack struct
kiocb using the get_current_ioprio() helper, ensuring that all BIOs
allocated and submitted for the system call execution see the correct
intended I/O priority early. With this, since a BIO I/O priority is
always set to the intended effective value for both the sync and async
path, blk_init_request_from_bio() can be simplified.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Growing in size a high priority request by merging it with a lower
priority BIO or request will increase the request execution time. This
is the opposite result of the desired effect of high I/O priorities,
namely getting low I/O latencies. Prevent merging of requests and BIOs
that have different I/O priorities to fix this.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For cases when the application does not specify aio_reqprio for an aio,
fallback to use get_current_ioprio() to obtain the task I/O priority
last set using ioprio_set() rather than the hardcoded IOPRIO_CLASS_NONE
value.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Define get_current_ioprio() as an inline helper to obtain the caller
I/O priority from its task I/O context. Use this helper in
blk_init_request_from_bio() to set a request ioprio.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio->bi_ioc is never set so always NULL. Remove references to it in
bio_disassociate_task() and in rq_ioc() and delete this field from
struct bio. With this change, rq_ioc() always returns
current->io_context without the need for a bio argument. Further
simplify the code and make it more readable by also removing this
helper, which also allows to simplify blk_mq_sched_assign_ioc() by
removing its bio argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Comment the use of the IOCB_FLAG_IOPRIO aio flag similarly to the
IOCB_FLAG_RESFD flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's specifically looking for a given request, which we will not be
supporting going forward. Also kill the qla2xxx poll implementation
as that's the only user of the nvme-fc poll, and the now unused
->poll_queue() hook.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently only really support sync poll, ie poll with 1 IO in flight.
This prepares us for supporting async poll.

Note that the returned value isn't necessarily 100% accurate. If poll
races with IRQ completion, we assume that the fact that the task is now
runnable means we found at least one entry. In reality it could be more
than 1, or not even 1. This is fine, the caller will just need to take
this into account.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For the core poll helper, the task state setting don't need to imply any
atomics, as it's the current task itself that is being modified and
we're not going to sleep.

For IRQ driven, the wakeup path have the necessary barriers to not need
us using the heavy handed version of the task state setting.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need a better way of configuring this, and given that polling is
(still) a bit niche, let's default to using 0 poll queues. That way
we'll have the same read/write/poll behavior as 4.20, and users that
want to test/use polling are required to do manual configuration of the
number of poll queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With the locking removed, it's unused. Kill it.

Fixes: 503f620f ("floppy: remove queue_lock around floppy_end_request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
  mm, page_alloc: check for max order in hot path
  scripts/spdxcheck.py: make python3 compliant
  tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
  lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
  mm/vmstat.c: fix NUMA statistics updates
  mm/gup.c: fix follow_page_mask() kerneldoc comment
  ocfs2: free up write context when direct IO failed
  scripts/faddr2line: fix location of start_kernel in comment
  mm: don't reclaim inodes with many attached pages
  mm, memory_hotplug: check zone_movable in has_unmovable_pages
  mm/swapfile.c: use kvzalloc for swap_info_struct allocation
  MAINTAINERS: update OMAP MMC entry
  hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
  kernel/sched/psi.c: simplify cgroup_move_task()
  z3fold: fix possible reclaim races

Pull scheduler fix from Ingo Molnar:
 "Fix an exec() related scalability/performance regression, which was
  caused by incorrectly calculating load and migrating tasks on exec()
  when they shouldn't be"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix cpu_util_wake() for 'execl' type workloads

Pull perf fixes from Ingo Molnar:
 "Fix uncore PMU enumeration for CofeeLake CPUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Support CoffeeLake 8th CBOX
  perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

Pull EFI fixes from Ingo Molnar:
 "Misc fixes: two warning splat fixes, a leak fix and persistent memory
  allocation fixes for ARM"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Permit calling efi_mem_reserve_persistent() from atomic context
  efi/arm: Defer persistent reservations until after paging_init()
  efi/arm/libstub: Pack FDT after populating it
  efi/arm: Revert deferred unmap of early memmap mapping
  efi: Fix debugobjects warning on 'efi_rts_work'

Pull ARM spectre updates from Russell King:
 "These are the currently known final bits that resolve the Spectre
  issues. big.Little systems used to be sufficiently identical in that
  there were no differences between individual CPUs in the system that
  mattered to the kernel. With the advent of the Spectre problem, the
  CPUs now have differences in how the workaround is applied.

  As a result of previous Spectre patches, these systems ended up
  reporting quite a lot of:

     "CPUx: Spectre v2: incorrect context switching function, system vulnerable"

  messages due to the action of the big.Little switcher causing the CPUs
  to be re-initialised regularly. This series resolves that issue by
  making the CPU vtable unique to each CPU.

  However, since this is used very early, before per-cpu is setup,
  per-cpu can't be used. We also have a problem that two of the methods
  are not called from preempt-safe paths, but thankfully these remain
  identical between all CPUs in the system. To make sure, we validate
  that these are identical during boot"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v2: per-CPU vtables to work around big.Little systems
  ARM: add PROC_VTABLE and PROC_TABLE macros
  ARM: clean up per-processor check_bugs method call
  ARM: split out processor lookup
  ARM: make lookup_processor_type() non-__init

Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.comSigned-off-by: Chen Chang <rainccrun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Without this change the following happens when using Python3 (3.6.6):

	$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
	FAIL: 'str' object has no attribute 'decode'
	Traceback (most recent call last):
	  File "scripts/spdxcheck.py", line 253, in <module>
	    parser.parse_lines(sys.stdin, args.maxlines, '-')
	  File "scripts/spdxcheck.py", line 171, in parse_lines
	    line = line.decode(locale.getpreferredencoding(False), errors='ignore')
	AttributeError: 'str' object has no attribute 'decode'

So as the line is already a string, there is no need to decode it and
the line can be dropped.

/usr/bin/python on Arch is Python 3.  So this would indeed be worth
going into 4.19.

Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.

man 2 lseek says

:      EINVAL whence  is  not  valid.   Or: the resulting file offset would be
:             negative, or beyond the end of a seekable device.
:
:      ENXIO  whence is SEEK_DATA or SEEK_HOLE, and the file offset is  beyond
:             the end of the file.

Make tmpfs return ENXIO under these circumstances as well.  After this,
tmpfs also passes xfstests's generic/448.

[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-8 complains about the prototype for this function:

  lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]

This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210

Workaround this by removing the noreturn attribute.

[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Scan through the whole array to see if an update is needed.  While we're
at it, use sizeof() to be safe against any possible type changes in the
future.

The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus.  Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway.  So I wouldn't bother to mark
this for stable, yet something nice to fix.

[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes: 1d90ca89 ("mm: update NUMA counter threshold size")
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit df06b37f ("mm/gup: cache dev_pagemap while pinning pages")
modified the signature of follow_page_mask() but left the parameter
description behind.

Update the description to make the code and comments agree again.

While at it, update formatting of the return value description to match
Documentation/doc-guide/kernel-doc.rst guidelines.

Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The write context should also be freed even when direct IO failed.
Otherwise a memory leak is introduced and entries remain in
oi->ip_unwritten_list causing the following BUG later in unlink path:

  ERROR: bug expression: !list_empty(&oi->ip_unwritten_list)
  ERROR: Clear inode of 215043, inode has unwritten extents
  ...
  Call Trace:
  ? __set_current_blocked+0x42/0x68
  ocfs2_evict_inode+0x91/0x6a0 [ocfs2]
  ? bit_waitqueue+0x40/0x33
  evict+0xdb/0x1af
  iput+0x1a2/0x1f7
  do_unlinkat+0x194/0x28f
  SyS_unlinkat+0x1b/0x2f
  do_syscall_64+0x79/0x1ae
  entry_SYSCALL_64_after_hwframe+0x151/0x0

This patch also logs, with frequency limit, direct IO failures.

Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.comSigned-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a source file reference location to the correct path name.

Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Spock reported that commit 172b06c3 ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.

The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache.  The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there.  So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.

The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.

To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page.  Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.

Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.comSigned-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Spock <dairinin@gmail.com>
Tested-by: Spock <dairinin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>	[4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>