The linux/audit.h header uses EM_MICROBLAZE in order to define
AUDIT_ARCH_MICROBLAZE, but it's only available in the microblaze
asm headers.  Move it to the common elf-em.h header so that the
define can be used on non-microblaze systems.  Otherwise we get
build errors that EM_MICROBLAZE isn't defined when we try to use
the AUDIT_ARCH_MICROBLAZE symbol.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Pull tty driver reverts from Greg KH:
 "Here are some reverts for some tty patches (specifically the pl011
  driver) that ended up breaking a bunch of machines (i.e. almost all
  of the ones with this chip).

  People are working on a fix for this, but in the meantime, it's best
  to just revert all 5 patches to restore people's serial consoles.

  These reverts have been in linux-next for many days now"

* tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "uart: pl011: Rename regs with enumeration"
  Revert "uart: pl011: Introduce register accessor"
  Revert "uart: pl011: Introduce register look up table"
  Revert "uart: pl011: Improve LCRH register access decision"
  Revert "uart: pl011: Add support to ZTE ZX296702 uart"

Pull more MTD updates from Brian Norris:
 "There was one significant bug in my first pull request, fixed here.  I
  also threw in a few trivial ID additions and a small module rename.

  Details:

   - SPI NOR: bug fix for a "end of table" check that resulted in a NULL
     dereference in some cases

   - SPI NOR: a few new IDs / feature flags

   - OMAP2 NAND: rename module so it doesn't conflict with onenand
     omap2.ko"

* tag 'for-linus-20150909' of git://git.infradead.org/linux-mtd:
  mtd: spi-nor: fix NULL dereference when no match found in spi_nor_ids[]
  mtd: spi-nor: s25sl064p supports both dual and quad I/O
  mtd: spi-nor: allow dual/quad reads on S25FL129P
  mtd: nand: omap2: Rename shippable module to omap2_nand
  mtd: spi-nor: Add support for sst25wf020a
  mtd: spi-nor: Add support for Micron n25q064a serial flash

Merge tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes introduces the beginnings of a new API that's
  based around the concept of states that can be atomically applied.
  Drivers go to various lengths to implement something similar, which
  indicates that the core should really be providing the necessary
  framework.

  On top of that, there is a bit of cleanup as well as improved
  kerneldoc and integration into the device-drivers DocBook.

  Regarding drivers there is a new one for the NXP LPC18xx family of
  SoCs and a couple of fixes for existing drivers (pca9685, Broadcom
  Kona and Atmel HLCDC)"

* tag 'pwm/for-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  ARM: at91: pwm: atmel-hlcdc: Add at91sam9n12 errata
  pwm: Add NXP LPC18xx PWM/SCT DT binding documentation
  pwm: NXP LPC18xx PWM/SCT driver
  pwm-pca9685: Support changing the output frequency
  pwm-pca9685: Fix several driver bugs
  pwm: kona: Modify settings application sequence
  pwm: pca9685: Drop owner assignment
  pwm: Add to device-drivers documentation
  pwm: Clean up kerneldoc
  pwm: Remove useless whitespace
  pwm: sysfs: Remove unnecessary padding
  pwm: sysfs: Properly convert from enum to string
  pwm: Make use of pwm_get_xxx() helpers where appropriate
  pwm: Add pwm_get_polarity() helper function
  pwm: Constify PWM device where possible
  pwm: Add the pwm_is_enabled() helper

Followup to the UFS series - with the way we clear the new blocks (via
buffer cache, possibly on more than a page worth of file) we really
should not insert a reference to new block into inode block tree until
after we'd cleared it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull virtio updates from Michael Tsirkin:
 "Virtio fixes and features for 4.3:

   - virtio-mmio can now be auto-loaded through acpi.
   - virtio blk supports extended partitions.
   - total memory is better reported when using virtio balloon with
     auto-deflate.
   - cache control is re-enabled when using virtio-blk in modern mode"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: do not change memory amount visible via /proc/meminfo
  virtio_ballon: change stub of release_pages_by_pfn
  virtio-blk: Allow extended partitions
  virtio_mmio: add ACPI probing
  virtio-blk: use VIRTIO_BLK_F_WCE and VIRTIO_BLK_F_CONFIG_WCE in virtio1

Pull metag updates from James Hogan:
 "Metag architecture changes for v4.3.

  Just a couple of changes for v4.3-rc1.  A preparatory IRQ patch to
  prepare for moving irq_data struct members, and a tweak to
  Documentation/features since Meta2 could support THP"

* tag 'metag-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  Documentation/features/vm: Meta2 is capable of THP
  metag/irq: Use access helper irq_data_get_affinity_mask()

Pull nios2 updates from Ley Foon Tan:

 - add defconfig and device tree for max 10 support
 - migrate to new 'set-state' interface for timer
 - fix unaligned handler
 - MAINTAINERS: update nios2 git repo

* tag 'nios2-v4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: add Max10 defconfig
  nios2: Add Max10 device tree
  MAINTAINERS: update nios2 git repo
  nios2: remove unused statistic counters
  nios2: fixed variable imm16 to s16
  nios2/time: Migrate to new 'set-state' interface

Pull cifs updates from Steve French:
 "Small cifs fix and a patch for improved debugging"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix use-after-free on mid_q_entry
  Update cifs version number
  Add way to query server fs info for smb3

As part of the v4.3 merge window the DAX code was updated by Matthew and
Kirill to handle PMD pages.  Also as part of the v4.3 merge window we
updated the DAX code to do proper PMEM flushing (commit 2765cfbb:
"dax: update I/O path to do proper PMEM flushing").

The additional code added by the DAX PMD patches also needs to be
updated to properly use the PMEM API.  This ensures that after a PMD
fault is handled the zeros written to the newly allocated pages are
durable on the DIMMs.

linux/dax.h is included to get rid of a bunch of sparse warnings.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>,
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull inifiniband/rdma updates from Doug Ledford:
 "This is a fairly sizeable set of changes.  I've put them through a
  decent amount of testing prior to sending the pull request due to
  that.

  There are still a few fixups that I know are coming, but I wanted to
  go ahead and get the big, sizable chunk into your hands sooner rather
  than waiting for those last few fixups.

  Of note is the fact that this creates what is intended to be a
  temporary area in the drivers/staging tree specifically for some
  cleanups and additions that are coming for the RDMA stack.  We
  deprecated two drivers (ipath and amso1100) and are waiting to hear
  back if we can deprecate another one (ehca).  We also put Intel's new
  hfi1 driver into this area because it needs to be refactored and a
  transfer library created out of the factored out code, and then it and
  the qib driver and the soft-roce driver should all be modified to use
  that library.

  I expect drivers/staging/rdma to be around for three or four kernel
  releases and then to go away as all of the work is completed and final
  deletions of deprecated drivers are done.

  Summary of changes for 4.3:

   - Create drivers/staging/rdma
   - Move amso1100 driver to staging/rdma and schedule for deletion
   - Move ipath driver to staging/rdma and schedule for deletion
   - Add hfi1 driver to staging/rdma and set TODO for move to regular
     tree
   - Initial support for namespaces to be used on RDMA devices
   - Add RoCE GID table handling to the RDMA core caching code
   - Infrastructure to support handling of devices with differing read
     and write scatter gather capabilities
   - Various iSER updates
   - Kill off unsafe usage of global mr registrations
   - Update SRP driver
   - Misc  mlx4 driver updates
   - Support for the mr_alloc verb
   - Support for a netlink interface between kernel and user space cache
     daemon to speed path record queries and route resolution
   - Ininitial support for safe hot removal of verbs devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
  IB/ipoib: Suppress warning for send only join failures
  IB/ipoib: Clean up send-only multicast joins
  IB/srp: Fix possible protection fault
  IB/core: Move SM class defines from ib_mad.h to ib_smi.h
  IB/core: Remove unnecessary defines from ib_mad.h
  IB/hfi1: Add PSM2 user space header to header_install
  IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
  mlx5: Fix incorrect wc pkey_index assignment for GSI messages
  IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
  IB/uverbs: reject invalid or unknown opcodes
  IB/cxgb4: Fix if statement in pick_local_ip6adddrs
  IB/sa: Fix rdma netlink message flags
  IB/ucma: HW Device hot-removal support
  IB/mlx4_ib: Disassociate support
  IB/uverbs: Enable device removal when there are active user space applications
  IB/uverbs: Explicitly pass ib_dev to uverbs commands
  IB/uverbs: Fix race between ib_uverbs_open and remove_one
  IB/uverbs: Fix reference counting usage of event files
  IB/core: Make ib_dealloc_pd return void
  IB/srp: Create an insecure all physical rkey only if needed
  ...

The errata for HLCDC PWM of at91sam9n12 are the same as for at91sam9x5.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Add the devicetree binding document for NXP LPC18xx PWM/SCT.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

This commit adds support for NXP LPC18xx PWM/SCT.

NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State
Configurable Timer (SCT) which can be configured as a Pulse Width
Modulator. Other SoCs in that family may share the same hardware.

The PWM supports a total of 16 channels, but only 15 can be simultaneously
requested. There's only one period, global to all the channels, thus PWM
driver will refuse setting different values to it, unless there's only one
channel requested.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
[thierry.reding@gmail.com: remove excessive padding of fields]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Pull IPMI updates from Corey Minyard:
 "Most of these have been sitting in linux-next for more than a release,
  particularly commit 0fbcf4af ("ipmi: Convert the IPMI SI ACPI
  handling to a platform device") which is probably the most complex
  patch.

  That is also the one that changes drivers/acpi/acpi_pnp.c.  The change
  in that file is only removing IPMI from a "special platform devices"
  list, since I convert it to the standard PNP interface.  I posted this
  one to the ACPI list twice and got no response, and it seems to work
  well in my testing, so I'm hoping it's good.

  Hidehiro Kawai posted a set of changes that improves the panic time
  handling in the IPMI driver.

  The rest of the changes are minor bug fixes or cleanups and some
  documentation"

* tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi:ssif: Add a module parm to specify that SMBus alerts don't work
  ipmi: add of_device_id in MODULE_DEVICE_TABLE
  ipmi: Compensate for BMCs that wont set the irq enable bit
  ipmi: Don't call receive handler in the panic context
  ipmi: Avoid touching possible corrupted lists in the panic context
  ipmi: Don't flush messages in sender() in run-to-completion mode
  ipmi: Factor out message flushing procedure
  ipmi: Remove unneeded set_run_to_completion call
  ipmi: Make some data const that was only read
  ipmi: constify SSIF ACPI device ids
  ipmi: Delete an unnecessary check before the function call "cleanup_one_si"
  char:ipmi - Change 1 to true for bool type variables during initialization.
  impi:Remove unneeded setting of module owner to THIS_MODULE in the platform structure, powernv_ipmi_driver
  ipmi: Add a comment in how messages are delivered from the lower layer
  ipmi/powernv: Fix potential invalid pointer dereference
  ipmi: Convert the IPMI SI ACPI handling to a platform device
  ipmi: Add device tree bindings information

Merge second patch-bomb from Andrew Morton:
 "Almost all of the rest of MM.  There was an unusually large amount of
  MM material this time"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
  zpool: remove no-op module init/exit
  mm: zbud: constify the zbud_ops
  mm: zpool: constify the zpool_ops
  mm: swap: zswap: maybe_preload & refactoring
  zram: unify error reporting
  zsmalloc: remove null check from destroy_handle_cache()
  zsmalloc: do not take class lock in zs_shrinker_count()
  zsmalloc: use class->pages_per_zspage
  zsmalloc: consider ZS_ALMOST_FULL as migrate source
  zsmalloc: partial page ordering within a fullness_list
  zsmalloc: use shrinker to trigger auto-compaction
  zsmalloc: account the number of compacted pages
  zsmalloc/zram: introduce zs_pool_stats api
  zsmalloc: cosmetic compaction code adjustments
  zsmalloc: introduce zs_can_compact() function
  zsmalloc: always keep per-class stats
  zsmalloc: drop unused variable `nr_to_migrate'
  mm/memblock.c: fix comment in __next_mem_range()
  mm/page_alloc.c: fix type information of memoryless node
  memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
  ...

Pull parisc updates from Helge Deller:
 "The most important changes in this patchset are:

   - re-enable 64bit PCI bus addresses which were temporarily disabled
     for PA-RISC in kernel 4.2

   - fix the 64bit CAS operation in the LWS path which now enables us to
     enable the 64bit gcc atomic builtins even on 32bit userspace with
     64bit kernel

   - fix a long-standing bug which sometimes crashed kernel at bootup
     while serial interrupt wasn't registered yet"

* 'parisc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use platform_device_register_simple("rtc-generic")
  parisc: Drop CONFIG_SMP around update_cr16_clocksource()
  parisc: Use double word condition in 64bit CAS operation
  parisc: Filter out spurious interrupts in PA-RISC irq handler
  parisc: Additionally check for in_atomic() in page fault handler
  PCI,parisc: Enable 64-bit bus addresses on PA-RISC
  parisc: Define ioremap_uc and ioremap_wc

Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds new zram test and fixes to problems found during
  testing this new zram test.  In addition, there are a few bug fixes
  and ksefltest improvement patches from Linaro developers.

  I will send another update later on this week to fix kselftest
  breakage due to commit 2bf9e0ab ("locking/static_keys: Provide a
  selftest") after the fix soaks in next for a couple of days"

* tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/zram: Makefile fix
  selftests/zram: must be run as root
  selftests: breakpoints: fix installing error on the architecture except x86
  selftests: check before install
  selftests/zram: Adding zram tests

Pull iommu updates for from Joerg Roedel:
 "This time the IOMMU updates are mostly cleanups or fixes.  No big new
  features or drivers this time.  In particular the changes include:

   - Bigger cleanup of the Domain<->IOMMU data structures and the code
     that manages them in the Intel VT-d driver.  This makes the code
     easier to understand and maintain, and also easier to keep the data
     structures in sync.  It is also a preparation step to make use of
     default domains from the IOMMU core in the Intel VT-d driver.

   - Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely
     in the ARM and Tegra SMMU drivers.

   - Fix for a potential buffer overflow in the OMAP iommu driver's
     debug code

   - A couple of smaller fixes and cleanups in various drivers

   - One small new feature: Report domain-id usage in the Intel VT-d
     driver to easier detect bugs where these are leaked"

* tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits)
  iommu/vt-d: Really use upper context table when necessary
  x86/vt-d: Fix documentation of DRHD
  iommu/fsl: Really fix init section(s) content
  iommu/io-pgtable-arm: Unmap and free table when overwriting with block
  iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h
  iommu/msm: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Access iomem correctly
  iommu/vt-d: Make two functions static
  iommu/vt-d: Use BUG_ON instead of if () BUG()
  iommu/vt-d: Return false instead of 0 in irq_remapping_cap()
  iommu/amd: Use BUG_ON instead of if () BUG()
  iommu/amd: Make a symbol static
  iommu/amd: Simplify allocation in irq_remapping_alloc()
  iommu/tegra-smmu: Parameterize number of TLB lines
  iommu/tegra-smmu: Factor out tegra_smmu_set_pde()
  iommu/tegra-smmu: Extract tegra_smmu_pte_get_use()
  iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages
  iommu/tegra-smmu: Remove PageReserved manipulation
  iommu/tegra-smmu: Convert to use DMA API
  iommu/tegra-smmu: smmu_flush_ptc() wants device addresses
  ...

Pull regmap updates from Mark Brown:
 "This has been a busy release for regmap.

  By far the biggest set of changes here are those from Markus Pargmann
  which implement support for block transfers in smbus devices.  This
  required quite a bit of refactoring but leaves us better able to
  handle odd restrictions that controllers may have and with better
  performance on smbus.

  Other new features include:

   - Fix interactions with lockdep for nested regmaps (eg, when a device
     using regmap is connected to a bus where the bus controller has a
     separate regmap).  Lockdep's default class identification is too
     crude to work without help.

   - Support for must write bitfield operations, useful for operations
     which require writing a bit to trigger them from Kuniori Morimoto.

   - Support for delaying during register patch application from Nariman
     Poushin.

   - Support for overriding cache state via the debugfs implementation
     from Richard Fitzgerald"

* tag 'regmap-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (25 commits)
  regmap: fix a NULL pointer dereference in __regmap_init
  regmap: Support bulk reads for devices without raw formatting
  regmap-i2c: Add smbus i2c block support
  regmap: Add raw_write/read checks for max_raw_write/read sizes
  regmap: regmap max_raw_read/write getter functions
  regmap: Introduce max_raw_read/write for regmap_bulk_read/write
  regmap: Add missing comments about struct regmap_bus
  regmap: No multi_write support if bus->write does not exist
  regmap: Split use_single_rw internally into use_single_read/write
  regmap: Fix regmap_bulk_write for bus writes
  regmap: regmap_raw_read return error on !bus->read
  regulator: core: Print at debug level on debugfs creation failure
  regmap: Fix regmap_can_raw_write check
  regmap: fix typos in regmap.c
  regmap: Fix integertypes for register address and value
  regmap: Move documentation to regmap.h
  regmap: Use different lockdep class for each regmap init call
  thermal: sti: Add parentheses around bridge->ops->regmap_init call
  mfd: vexpress: Add parentheses around bridge->ops->regmap_init call
  regmap: debugfs: Fix misuse of IS_ENABLED
  ...

Pull fbdev updates from Tomi Valkeinen:
 "Minor fixes and cleanups"

* tag 'fbdev-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: atmel_lcdfb: remove useless include
  video: fbdev: pxa168fb: Use devm_clk_get
  fbdev: ssd1307fb: fix error return code
  fbdev: fix snprintf() limit in show_bl_curve()
  video: fbdev: s3c-fb: Constify platform_device_id
  video: fbdev: atmel: fix warning for const return value
  video: fbdev: Drop owner assignment from platform_driver
  video: fbdev: Drop owner assignment from i2c_driver
  fbdev: remove unnecessary memset in vfb
  framebuffer: disable vgacon on microblaze arch
  fbdev: udlfb: remove unneeded initialization in few places
  fbdev: Allow compile test of GPIO consumers if !GPIOLIB
  fbdev: fix cea_modes array size

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a race condition in the request handling
   - Skip trim commands for some buggy kingston eMMCs
   - An optimization and a correction for erase groups
   - Set CMD23 quirk for some Sandisk cards

  MMC host:
   - sdhci: Give GPIO CD higher precedence and don't poll when it's used
   - sdhci: Fix DMA memory leakage
   - sdhci: Some updates for clock management
   - sdhci-of-at91: introduce driver for the Atmel SDMMC
   - sdhci-of-arasan: Add support for sdhci-5.1
   - sdhci-esdhc-imx: Add support for imx7d which also supports HS400
   - sdhci: A collection of fixes and improvements for various sdhci hosts
   - omap_hsmmc: Modernization of the regulator code
   - dw_mmc: A couple of fixes for DMA and PIO mode
   - usdhi6rol0: A few fixes and support probe deferral for regulators
   - pxamci: Convert to use dmaengine
   - sh_mmcif: Fix the suspend process in a short term solution
   - tmio: Adjust timeout for commands
   - sunxi: Fix timeout while gating/ungating clock"

* tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: android-goldfish: remove incorrect __iomem annotation
  mmc: core: fix race condition in mmc_wait_data_done
  mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check
  mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
  mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
  mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state
  mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state
  mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
  mmc: host: omap_hsmmc: add separate function to set pbias
  mmc: host: omap_hsmmc: add separate functions for enable/disable supply
  mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
  mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
  mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
  mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
  mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
  mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
  mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
  mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warnings
  mmc: sh_mmcif: Fix suspend process
  mmc: usdhi6rol0: fix error return code
  ...

Merge tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Significant work on toshiba_acpi, including new hardware support,
  refactoring, and cleanups.  Extend device support for asus, ideapad,
  and acer systems.  New surface pro 3 buttons driver.  Misc minor
  cleanups for thinkpad and hp-wireless.

  acer-wmi:
   - No rfkill on HP Omen 15 wifi

  thinkpad_acpi:
   - Remove side effects from vdbg_printk -> no_printk macro

  surface pro 3:
   - Add support driver for Surface Pro 3 buttons

  hp-wireless:
   - remove unneeded goto/label in hpwl_init

  ideapad-laptop:
   - add alternative representation for Yoga 2 to DMI table
   - Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list

  asus-laptop:
   - Add key found on Asus F3M

  MAINTAINERS:
   - Remove Toshiba Linux mailing list address

  toshiba_acpi:
   - Bump driver version to 0.23
   - Remove unnecessary checks and returns in HCI/SCI functions
   - Refactor *{get, set} functions return value
   - Remove "*not supported" feature prints
   - Change *available functions return type
   - Add set_fan_status function
   - Change some variables to avoid warnings from ninja-check
   - Reorder toshiba_acpi_alt_keymap entries
   - Remove unused wireless defines
   - Transflective backlight updates
   - Avoid registering input device on WMI event laptops
   - Add /dev/toshiba_acpi device
   - Adapt /proc/acpi/toshiba/keys to TOS1900 devices"

* tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (21 commits)
  acer-wmi: No rfkill on HP Omen 15 wifi
  thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macro
  surface pro 3: Add support driver for Surface Pro 3 buttons
  hp-wireless: remove unneeded goto/label in hpwl_init
  ideapad-laptop: add alternative representation for Yoga 2 to DMI table
  asus-laptop: Add key found on Asus F3M
  MAINTAINERS: Remove Toshiba Linux mailing list address
  ideapad-laptop: Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
  toshiba_acpi: Bump driver version to 0.23
  toshiba_acpi: Remove unnecessary checks and returns in HCI/SCI functions
  toshiba_acpi: Refactor *{get, set} functions return value
  toshiba_acpi: Remove "*not supported" feature prints
  toshiba_acpi: Change *available functions return type
  toshiba_acpi: Add set_fan_status function
  toshiba_acpi: Change some variables to avoid warnings from ninja-check
  toshiba_acpi: Reorder toshiba_acpi_alt_keymap entries
  toshiba_acpi: Remove unused wireless defines
  toshiba_acpi: Transflective backlight updates
  toshiba_acpi: Avoid registering input device on WMI event laptops
  toshiba_acpi: Add /dev/toshiba_acpi device
  ...

Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...

Pull RTC updates from Alexandre Belloni:
 "Core:
   - use is_visible() to control sysfs attributes
   - switch wakealarm attribute to DEVICE_ATTR_RW
   - make rtc_does_wakealarm() return boolean
   - properly manage lifetime of dev and cdev in rtc device
   - remove unnecessary device_get() in rtc_device_unregister
   - fix double free in rtc_register_device() error path

  New drivers:
   - NXP LPC24xx
   - Xilinx Zynq MP
   - Dialog DA9062

  Subsystem wide cleanups:
   - fix drivers that consider 0 as a valid IRQ in client->irq
   - Drop (un)likely before IS_ERR(_OR_NULL)
   - drop the remaining owner assignment for i2c_driver and
     platform_driver
   - module autoload fixes

  Drivers:
   - 88pm80x: add device tree support
   - abx80x: fix RTC write bit
   - ab8500: Add a sentinel to ab85xx_rtc_ids[]
   - armada38x: Align RTC set time procedure with the official errata
   - as3722: correct month value
   - at91sam9: cleanups
   - at91rm9200: get and use slow clock and cleanups
   - bq32k: remove redundant check
   - cmos: century support, proper fix for the spurious wakeup
   - ds1307: cleanups and wakeup irq support
   - ds1374: Remove unused variable
   - ds1685: Use module_platform_driver
   - ds3232: fix WARNING trace in resume function
   - gemini: fix ptr_ret.cocci warnings
   - mt6397: implement suspend/resume
   - omap: support internal and external clock enabling
   - opal: Enable alarms only when opal supports tpo
   - pcf2127: use OFS flag to detect unreliable date and warn the user
   - pl031: fix typo for author email
   - rx8025: huge cleanup and fixes
   - sa1100/pxa: share common code
   - s5m: fix to update ctrl register
   - s3c: fix clocks and wakeup, cleanup
   - sirfsoc: use regmap
   - nvram_read()/nvram_write() functions for cmos, ds1305, ds1307,
     ds1343, ds1511, ds1553, ds1742, m48t59, rp5c01, stk17ta8, tx4939
   - use rtc_valid_tm() error code when reading date/time instead of 0
     for isl12022, pcf2123, pcf2127"

* tag 'rtc-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (90 commits)
  rtc: abx80x: fix RTC write bit
  rtc: ab8500: Add a sentinel to ab85xx_rtc_ids[]
  rtc: ds1374: Remove unused variable
  rtc: Fix module autoload for OF platform drivers
  rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} drivers
  rtc: omap: Add external clock enabling support
  rtc: omap: Add internal clock enabling support
  ARM: dts: AM437x: Add the internal and external clock nodes for rtc
  rtc: s5m: fix to update ctrl register
  rtc: add xilinx zynqmp rtc driver
  devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc
  rtc: as3722: correct month value
  ARM: config: Switch PXA27x platforms to use PXA RTC driver
  ARM: mmp: remove unused RTC register definitions
  ARM: sa1100: remove unused RTC register definitions
  rtc: sa1100/pxa: convert to run-time register mapping
  ARM: pxa: add memory resource to SA1100 RTC device
  rtc: pxa: convert to use shared sa1100 functions
  rtc: sa1100: prepare to share sa1100_rtc_ops
  rtc: ds3232: fix WARNING trace in resume function
  ...

Remove zpool_init() and zpool_exit(); they do nothing other than print
"loaded" and "unloaded".
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The structure zbud_ops is not modified so make the pointer to it a
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The structure zpool_ops is not modified so make the pointer to it a
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap_get_swap_cache_page and read_swap_cache_async have pretty much the
same code with only significant difference in return value and usage of
swap_readpage.

I a helper __read_swap_cache_async() with the common code.  Behavior
change: now zswap_get_swap_cache_page will use radix_tree_maybe_preload
instead radix_tree_preload.  Looks like, this wasn't changed only by the
reason of code duplication.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make zram syslog error reporting more consistent. We have random
error levels in some places. For example, critical errors like
  "Error allocating memory for compressed page"
and
  "Unable to allocate temp memory"
are reported as KERN_INFO messages.

a) Reassign error levels

Error messages that directly affect zram
functionality -- pr_err():

 Error allocating zram address table
 Error creating memory pool
 Decompression failed! err=%d, page=%u
 Unable to allocate temp memory
 Compression failed! err=%d
 Error allocating memory for compressed page: %u, size=%zu
 Cannot initialise %s compressing backend
 Error allocating disk queue for device %d
 Error allocating disk structure for device %d
 Error creating sysfs group for device %d
 Unable to register zram-control class
 Unable to get major number

Messages that do not affect functionality, but user
must be warned (because sysfs attrs will be removed in
this particular case) -- pr_warn():

 %d (%s) Attribute %s (and others) will be removed. %s

Messages that do not affect functionality and mostly are
informative -- pr_info():

 Cannot change max compression streams
 Can't change algorithm for initialized device
 Cannot change disksize for initialized device
 Added device: %s
 Removed device: %s

b) Update sysfs_create_group() error message

First, it lacks a trailing new line; add it.  Second, every error message
in zram_add() has a "for device %d" part, which makes errors more
informative.  Add missing part to "Error creating sysfs group" message.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can pass a NULL cache pointer to kmem_cache_destroy(), because it
NULL-checks its argument now.  Remove redundant test from
destroy_handle_cache().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can avoid taking class ->lock around zs_can_compact() in
zs_shrinker_count(), because the number that we return back is outdated
in general case, by design.  We have different sources that are able to
change class's state right after we return from zs_can_compact() --
ongoing I/O operations, manually triggered compaction, or two of them
happening simultaneously.

We re-do this calculations during compaction on a per class basis
anyway.

zs_unregister_shrinker() will not return until we have an active
shrinker, so classes won't unexpectedly disappear while
zs_shrinker_count() iterates them.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no need to recalcurate pages_per_zspage in runtime.  Just use
class->pages_per_zspage to avoid unnecessary runtime overhead.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no reason to prevent select ZS_ALMOST_FULL as migration source
if we cannot find source from ZS_ALMOST_EMPTY.

With this patch, zs_can_compact will return more exact result.
Signed-off-by: Minchan Kim <minchan.kim@lge.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We want to see more ZS_FULL pages and less ZS_ALMOST_{FULL, EMPTY}
pages.  Put a page with higher ->inuse count first within its
->fullness_list, which will give us better chances to fill up this page
with new objects (find_get_zspage() return ->fullness_list head for new
object allocation), so some zspages will become ZS_ALMOST_FULL/ZS_FULL
quicker.

It performs a trivial and cheap ->inuse compare which does not slow down
zsmalloc and in the worst case keeps the list pages in no particular
order.

A more expensive solution could sort fullness_list by ->inuse count.

[minchan@kernel.org: code adjustments]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Perform automatic pool compaction by a shrinker when system is getting
tight on memory.

User-space has a very little knowledge regarding zsmalloc fragmentation
and basically has no mechanism to tell whether compaction will result in
any memory gain.  Another issue is that user space is not always aware
of the fact that system is getting tight on memory.  Which leads to very
uncomfortable scenarios when user space may start issuing compaction
'randomly' or from crontab (for example).  Fragmentation is not always
necessarily bad, allocated and unused objects, after all, may be filled
with the data later, w/o the need of allocating a new zspage.  On the
other hand, we obviously don't want to waste memory when the system
needs it.

Compaction now has a relatively quick pool scan so we are able to
estimate the number of pages that will be freed easily, which makes it
possible to call this function from a shrinker->count_objects()
callback.  We also abort compaction as soon as we detect that we can't
free any pages any more, preventing wasteful objects migrations.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compaction returns back to zram the number of migrated objects, which is
quite uninformative -- we have objects of different sizes so user space
cannot obtain any valuable data from that number.  Change compaction to
operate in terms of pages and return back to compaction issuer the
number of pages that were freed during compaction.  So from now on we
will export more meaningful value in zram<id>/mm_stat -- the number of
freed (compacted) pages.

This requires:
 (a) a rename of `num_migrated' to 'pages_compacted'
 (b) a internal API change -- return first_page's fullness_group from
     putback_zspage(), so we know when putback_zspage() did
     free_zspage().  It helps us to account compaction stats correctly.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

`zs_compact_control' accounts the number of migrated objects but it has
a limited lifespan -- we lose it as soon as zs_compaction() returns back
to zram.  It worked fine, because (a) zram had it's own counter of
migrated objects and (b) only zram could trigger compaction.  However,
this does not work for automatic pool compaction (not issued by zram).
To account objects migrated during auto-compaction (issued by the
shrinker) we need to store this number in zs_pool.

Define a new `struct zs_pool_stats' structure to keep zs_pool's stats
there.  It provides only `num_migrated', as of this writing, but it
surely can be extended.

A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to
caller.

Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change zs_object_copy() argument order to be (DST, SRC) rather than
(SRC, DST).  copy/move functions usually have (to, from) arguments
order.

Rename alloc_target_page() to isolate_target_page().  This function
doesn't allocate anything, it isolates target page, pretty much like
isolate_source_page().

Tweak __zs_compact() comment.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This function checks if class compaction will free any pages.
Rephrasing -- do we have enough unused objects to form at least one
ZS_EMPTY page and free it.  It aborts compaction if class compaction
will not result in any (further) savings.

EXAMPLE (this debug output is not part of this patch set):

 - class size
 - number of allocated objects
 - number of used objects
 - max objects per zspage
 - pages per zspage
 - estimated number of pages that will be freed

[..]
class-512 objs:544 inuse:540 maxobj-per-zspage:8  pages-per-zspage:1 zspages-to-free:0
 ... class-512 compaction is useless. break
class-496 objs:660 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:2
class-496 objs:627 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:1
class-496 objs:594 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:0
 ... class-496 compaction is useless. break
class-448 objs:657 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:4
class-448 objs:648 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:3
class-448 objs:639 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:2
class-448 objs:630 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:1
class-448 objs:621 inuse:617 maxobj-per-zspage:9  pages-per-zspage:1 zspages-to-free:0
 ... class-448 compaction is useless. break
class-432 objs:728 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:1
class-432 objs:700 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:0
 ... class-432 compaction is useless. break
class-416 objs:819 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:2
class-416 objs:780 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:1
class-416 objs:741 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:0
 ... class-416 compaction is useless. break
class-400 objs:690 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:1
class-400 objs:680 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:0
 ... class-400 compaction is useless. break
class-384 objs:736 inuse:709 maxobj-per-zspage:32 pages-per-zspage:3 zspages-to-free:0
 ... class-384 compaction is useless. break
[..]

Every "compaction is useless" indicates that we saved CPU cycles.

class-512 has
	544	object allocated
	540	objects used
	8	objects per-page

Even if we have a ALMOST_EMPTY zspage, we still don't have enough room to
migrate all of its objects and free this zspage; so compaction will not
make a lot of sense, it's better to just leave it as is.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>