- 07 Sep, 2005 40 commits
-
-
john stultz authored
This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Mark variables which are usually accessed for reads with __readmostly. Signed-off-by:
Alok N Kataria <alokk@calsoftinc.com> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
-
Pekka Enberg authored
This patch cleans up the error path of futex_fd() by removing duplicate code. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Alexey Dobriyan authored
Tested with 2.12i and 2.13-pre2. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Oleg Nesterov authored
posix_timer_event() first checks that the thread (SIGEV_THREAD_ID case) does not have PF_EXITING flag, then it calls send_sigqueue() which locks task list. But if the thread exits in between the kernel will oops (->sighand == NULL after __exit_sighand). This patch moves the PF_EXITING check into the send_sigqueue(), it must be done atomically under tasklist_lock. When send_sigqueue() detects exiting thread it returns -1. In that case posix_timer_event will send the signal to thread group. Also, this patch fixes task_struct use-after-free in posix_timer_event. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dave Johnson authored
Every time cramfs_lookup() is called to lookup and inode for a dentry, get_cramfs_inode() will allocate a new inode without checking to see if that inode already exists in the inode cache. This is fine the first time, but if the dentry cache entry(ies) associated with that inode are aged out, but the inode entry is not aged out (which can be quite common if the inode has buffer cache linked to it), cramfs_lookup() will be called again and another inode will be allocated and added to the inode cache creating a duplicate in the inode cache. The big issue here is that the buffers associated with each inode cache entry are not shared between the duplicates! The older inode entries are now orphaned as no dentry points to it and won't be freed until the buffer cache assoicated with them are first freed. The newest entry will have to create all new buffer cache for each part of its file as the old buffer cache is now orphaned as well. Patch below fixes this by making get_cramfs_inode() use the inode cache before blindly creating a new entry every time. This eliminates the duplicate inodes and duplicate buffer cache. Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by:
-
Adrian Bunk authored
The second arg of do_timer_interrupt() is not used in the functions, and all callers pass NULL. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Paul Mundt <lethal@Linux-SH.ORG> Signed-off-by:
-
Eric Dumazet authored
struct file cleanup: f_maxcount has an unique value (INT_MAX). Just use the hard-wired value. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Jesper Juhl authored
The patch removes a redundant variable `sig' from sys_prctl(). For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG then the value of arg2 is assigned to an int variable named sig. Then sig is tested with valid_signal() and later used to set the value of current->pdeath_signal . There is no reason to use this intermediate variable since valid_signal() takes a unsigned long argument, so it can handle being passed arg2 directly, and if the call to valid_signal is OK, then we know the value of arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int and thus there's no problem assigning it later to current->pdeath_signal (which is an int). The patch gets rid of the pointless variable `sig'. This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my system. Patch has been compile tested, boot tested, and just to make damn sure I didn't break anything I wrote a quick test app that calls prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a unsigned long, and it behaves as expected with and without the patch. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Tejun Heo authored
In update_atime(), timespec_equal() test is done twice in succession and the second is always false. This patch removes the second test. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Peter Staubach authored
There is a problem in the accounting subsystem in the kernel can not correctly handle files larger than 2GB. The output file containing the process accounting data can grow very large if the system is large enough and active enough. If the 2GB limit is reached, then the system simply stops storing process accounting data. Another annoying problem is that once the system reaches this 2GB limit, then every process which exits will receive a signal, SIGXFSZ. This signal is generated because an attempt was made to write beyond the limit for the file descriptor. This signal makes it look like every process has exited due to a signal, when in fact, they have not. The solution is to add the O_LARGEFILE flag to the list of flags used to open the accounting file. The rest of the accounting support is already largefile safe. The changes were tested by constructing a large file (just short of 2GB), enabling accounting, and then running enough commands to cause the accounting data generated to increase the size of the file to 2GB. Without the changes, the file grows to 2GB and the last command run in the test script appears to exit due a signal when it has not. With the changes, things work as expected and quietly. There are some user level changes required so that it can deal with largefiles, but those are being handled separately. Signed-off-by:
Peter Staubach <staubach@redhat.com> Signed-off-by:
-
Adrian Bunk authored
The main Makefile is already adding -g to the CFLAGS if CONFIG_DEBUG_INFO=y. Not that two -g would do harm, but one works as well. Signed-off-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
-
Oleg Nesterov authored
This patch simplifies the usage of do_notify_parent_cldstop(), it lessens the source and .text size slightly, and makes the code (in my opinion) a bit more readable. I am sending this patch now because I'm afraid Paul will touch do_notify_parent_cldstop() really soon, It's better to cleanup first. Signed-off-by:
-
Stephane Doyon authored
I've had WARN_CONSOLE_UNLOCKED warnings when calling TIOCLINUX TIOCL_BLANKSCREEN and TIOCL_UNBLANKSCREEN. (I'm blind and I use a braille display. I use those functions to blank my laptop's screen so people don't read it, and hopefully to conserve power.) The warnings are from these places: do_blank_screen at drivers/char/vt.c:2754 (Not tainted) save_screen at drivers/char/vt.c:575 (Not tainted) do_unblank_screen at drivers/char/vt.c:2822 (Not tainted) set_palette at drivers/char/vt.c:2908 (Not tainted) At a glance I would think the following patch ought to fix that. Tested on one machine. Could you please tell me if this is correct and/or forward the patch where appropriate... Signed-off-by:
Stephane Doyon <s.doyon@videotron.ca> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Neil Horman authored
Patch to clean up missing overflow check in get_blkdev_list. The printf which adds the "Block Devices" string in /proc/devices can overflow the presented page if get_chrdev_list eats up the entire 4k space. Signed-off-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
Ralf Baechle authored
There is no do_nanosleep function so kill it's declaration in <linux/time.h>. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Tommy S. Christensen authored
The phy status register must be read twice in order to get the actual link state. Signed-off-by:
Tommy S. Christensen <tommy.christensen@tpack.net> Signed-off-by:
-
Christoph Hellwig authored
unused and useless.. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
David Gibson authored
The i386 OProfile code has a function named nmi_exit(), which collides with the nmi_exit() macro in linux/hardirq.h. At the moment, we get away with it, because hardirq.h isn't included in the oprofile code. I hit this as a bug when working with a patch which (indirectly) adds a #include of hardirq.h to oprofile. Regardless, the name collision is probably not a good idea, so this patch fixes it, renaming the oprofile function to op_nmi_exit(). It also renames the nmi_init() and nmi_timer_init() functions similarly, for consistency. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Karsten Wiese authored
IRQ_PER_CPU is not used by all architectures. This patch introduces the macros ARCH_HAS_IRQ_PER_CPU and CHECK_IRQ_PER_CPU() to avoid the generation of dead code in __do_IRQ(). ARCH_HAS_IRQ_PER_CPU is defined by architectures using IRQ_PER_CPU in their include/asm_ARCH/irq.h file. Through grepping the tree I found the following architectures currently use IRQ_PER_CPU: cris, ia64, ppc, ppc64 and parisc. Signed-off-by:Karsten Wiese <annabellesgarden@yahoo.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
H. Peter Anvin authored
Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Frank Sorenson <frank@tuxrocks.com> Signed-off-by:
-
Adrian Bunk authored
This patch removes prototypes for the generic_file_open and generic_file_llseek functions. Besides being superfluous because they are already present in fs.h, they were also wrong because the actual functions aren't weak functions. Signed-off-by:
-
Adrian Bunk authored
This patch contains the following updates to the help texts: - QUOTA: most people will get the quota utilities from their distribution, and if not the mini-HOWTO will tell them - QFMT_V2: quota utilities 3.01 are no longer recent, they are now ancient and 3.01 is lower than the minimal version documented in Documentation/Changes Signed-off-by:Jan Kara <jack@suse.cz> Signed-off-by:
-
Maximilian Attems authored
This interface is said to be commonly used in germany: "The patch has been proven to work fine in a beige G3 Mac." http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262324Signed-off-by:
maximilian attems <janitor@sternwelten.at> Signed-off-by:
-
Nikita Danilov authored
cleanup of deadline_dispatch_requests(): - replace drq selection with hopefully clearer while semantically the same construct: take write request, if there is any, otherwise take read one, or NULL if none exist. - kill unused other_dir. Signed-off-by:
Nikita Danilov <nikita@clusterfs.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Olof Johansson authored
Since early userspace was added, there's no way to override which init to run from it. Some people tack on an extra cpio archive with a link from /init depending on what they want to run, but that's sometimes impractical. Changing the "init=" to also override the early userspace isn't feasible, since it is still used to indicate what init to run from disk when early userspace has completed doing whatever it's doing (i.e. load filesystem modules and drivers). Instead, introduce "rdinit=" and make it override the default "/init" if specified. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Miklos Szeredi authored
This patch fixes bug titled "sunrpc as module and bad proc/sys link count" reported by Jiri Slaby. The problem was, that only proc_dir_entry->nlink was updated and the corresponding inode->i_nlink was not. The fix is to implement the inode->getattr() method, and update i_nlink (if necessary). A quick audit of proc code shows that no other attribute changes after creation. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Mika Kukkonen authored
With "-W -Wno-unused -Wno-sign-compare" I get the following compile warning: CC kernel/workqueue.o kernel/workqueue.c: In function `workqueue_cpu_callback': kernel/workqueue.c:504: warning: ordered comparison of pointer with integer zero On error create_workqueue_thread() returns NULL, not negative pointer, so following trivial patch suggests itself. Signed-off-by:
Mika Kukkonen <mikukkon@gmail.com> Signed-off-by:
-
Robert Love authored
Add fsnotify_xattr() hook to removexattr(). Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
John McCtuchan <ttb@tentacle.dhs.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
-
Doug Warzecha authored
This patch adds the Dell Systems Management Base Driver with sysfs support. This driver has been tested with Dell OpenManage. Signed-off-by:
Doug Warzecha <Douglas_Warzecha@dell.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Abhay Salunke authored
Remote BIOS Update driver for updating BIOS images on Dell servers and desktops. See dell_rbu.txt for details. Signed-off-by:
Abhay Salunke <Abhay_Salunke@dell.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Abhay Salunke authored
Upgrade the request_firmware_nowait function to not start the hotplug action on a firmware update. This patch is tested along with dell_rbu driver on i386 and x86-64 systems. Signed-off-by:
-
Karsten Wiese authored
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> This speeds up directory reads for large FAT partitions, if the buffercache has to be filled from the drive. Following values were taken from: $ time find path_to_freshly_mounted_fat > /dev/null on an otherwise idle system. FAT with 16KB Clusters on IDE attached drive: Factor 2 FAT with 32KB Clusters on USB2 attached drive: Factor 10 (!) Its less than 1/10 slower, if the buffercache is uptodate. The patch introduces the new function fat_dir_readahead(). fat_dir_readahead() calls sb_breadahead() to readahead a whole cluster, if the requested sector is the first one in a cluster. It is usefull to do this, because on FAT directories occupy whole clusters, with the exception of FAT12/FAT16 root dirs. Readahead is only done, if the cluster's first sector is not uptodate to avoid overhead, when the buffer cache is already uptodate. Note that under memory pressure, the maximal byte count wasted (read: has to be red from disk twice) is 1 cluster's size. Thats 64KB. fat_dir_readahead() is called from fat__get_entry(). There is also an unrelated cleanup at one spot: if (bh) brelse(bh); is replaced with: brelse(bh); brelse() can handle NULL pointer arguments by itself. Signed-off-by:OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Thomas Koeller authored
Change the sequence of operations performed during module loading to flush the instruction cache before module parameters are processed. If a module has parameters of an unusual type that cannot be handled using the standard accessor functions param_set_xxx and param_get_xxx, it has to to provide a set of accessor functions for this type. This requires module code to be executed during parameter processing, which is of course only possible after the icache has been flushed. Signed-off-by:
Thomas Koeller <thomas@koeller.dyndns.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Mike Waychison authored
Change the /proc/sysvipc/shm|sem|msg files to use the generic seq_file implementation for struct ipc_ids. Signed-off-by:
Mike Waychison <mikew@google.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Mike Waychison authored
The following two patches convert /proc/sysvipc/* to use seq_file. This gives us the following: - Self-consistent IPC records in proc. - O(n) reading of the files themselves. This patch: Add a generic method for ipc types to be displayed using seq_file. This patch abstracts out seq_file iterating over struct ipc_ids into ipc/util.c Signed-off-by:
-
Bruce Allan authored
When registering an RPC cache, cache_register() always sets the owner as the sunrpc module. However, there are RPC caches owned by other modules. With the incorrect owner setting, the real owning module can be removed potentially with an open reference to the cache from userspace. For example, if one were to stop the nfs server and unmount the nfsd filesystem, the nfsd module could be removed eventhough rpc.idmapd had references to the idtoname and nametoid caches (i.e. /proc/net/rpc/nfs4.<cachename>/channel is still open). This resulted in a system panic on one of our machines when attempting to restart the nfs services after reloading the nfsd module. The following patch adds a 'struct module *owner' field in struct cache_detail. The owner is further assigned to the struct proc_dir_entry in cache_register() so that the module cannot be unloaded while user-space daemons have an open reference on the associated file under /proc. Signed-off-by:
Bruce Allan <bwa@us.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
-
Steven Pratt authored
We don't reset the cache hit count until after readahead does a successful readahead. This seems to leave a corner case open where we miss in cache, but don't restart the readhead right away. Signed-off-by:
-
Bjorn Helgaas authored
Seems pointless to require .c files to test CONFIG_PNP_DEBUG and conditionally define DEBUG before including <linux/pnp.h>. Just test CONFIG_PNP_DEBUG directly in pnp.h. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by:
-
