- 15 Jan, 2019 2 commits
-
-
Aditya Swarup authored
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP. v2: Jani suggested to keep the macros organized semantically i.e., by function, secondarily by port/pipe/transcoder.->(dw, port) Fixes: 4e53840f ("drm/i915/icl: Introduce new macros to get combophy registers") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
-
Chris Wilson authored
On Braswell, under heavy stress, if we update the GGTT while simultaneously accessing another region inside the GTT, we are returned the wrong values. To prevent this we stop the machine to update the GGTT entries so that no memory traffic can occur at the same time. This was first spotted in commit 5bab6f60 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Oct 23 18:43:32 2015 +0100 drm/i915: Serialise updates to GGTT with access through GGTT on Braswell but removed again in forlorn hope with commit 4509276e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Feb 20 12:47:18 2017 +0000 drm/i915: Remove Braswell GGTT update w/a However, gem_concurrent_blit is once again only stable with the patch applied and CI is detecting the odd failure in forked gem_mmap_gtt tests (which smell like the same issue). Fwiw, a wide variety of CPU memory barriers (around GGTT flushing, fence updates, PTE updates) and GPU flushes/invalidates (between requests, after PTE updates) were tried as part of the investigation to find an alternate cause, nothing comes close to serialised GGTT updates. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105591 Testcase: igt/gem_concurrent_blit Testcase: igt/gem_mmap_gtt/*forked* References: 5bab6f60 ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell") References: 4509276e ("drm/i915: Remove Braswell GGTT update w/a") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114211729.30352-1-chris@chris-wilson.co.uk
-
- 14 Jan, 2019 23 commits
-
-
Chris Wilson authored
We have two classes of VM, global GTT and per-process GTT. In order to allow ourselves the freedom to mix both along call chains, distinguish the two classes with regards to their mutex and lockdep maps. Signed-off-by:
-
Juha-Pekka Heikkila authored
Primary and sprite plane enable on ILK-IVB may take two frames to complete Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103925Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1545305168-6047-1-git-send-email-juhapekka.heikkila@gmail.com
-
Chris Wilson authored
Currently Ironlake operates under the assumption that rpm awake (and its error checking is disabled). As such, we have missed a few places where we access registers without taking the rpm wakeref and thus trigger warnings. intel_ips being one culprit. As this involved adding a potentially sleeping rpm_get, we have to rearrange the spinlocks slightly and so switch to acquiring a device-ref under the spinlock rather than hold the spinlock for the whole operation. To be consistent, we make the change in pattern common to the intel_ips interface even though this adds a few more atomic operations than necessary in a few cases. v2: Sagar noted the mb around setting mch_dev were overkill as we only need ordering there, and that i915_emon_status was still using struct_mutex for no reason, but lacked rpm. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-21-chris@chris-wilson.co.uk
-
Chris Wilson authored
As the GT_IRQ power domain implies a wakeref, we can use it inplace of our existing redundant rpm grab. v2: Drop papering over forgetting to take the runtime wakeref in selftests Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-20-chris@chris-wilson.co.uk
-
Chris Wilson authored
As we only release each power well once, we assume that each transcoder maps to a different domain. Complain if this is not so. Signed-off-by:
-
Chris Wilson authored
Track where and when we acquire and release the power well for pps access along the dp aux link, with a view to detecting if we leak any wakerefs. Signed-off-by:
-
Chris Wilson authored
On module load and unload, we grab the POWER_DOMAIN_INIT powerwells and transfer them to the runtime-pm code. We can use our wakeref tracking to verify that the wakeref is indeed passed from init to enable, and disable to fini; and across suspend. Signed-off-by:
-
Chris Wilson authored
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). Signed-off-by:
-
Chris Wilson authored
Frequently, we use intel_runtime_pm_get/_put around a small block. Formalise that usage by providing a macro to define such a block with an automatic closure to scope the intel_runtime_pm wakeref to that block, i.e. macro abuse smelling of python. Signed-off-by:
-
Chris Wilson authored
Track the temporary wakerefs used within the selftests so that leaks are clear. v2: Add a couple of coarse annotations for mock selftests as we now loudly warn about the errors. Signed-off-by:
-
Chris Wilson authored
Keep track of the temporary rpm wakeref used for panel backlight access, so that we can cancel it immediately upon release and so more clearly identify leaks. Signed-off-by:
-
Chris Wilson authored
Keep track of the temporary rpm wakeref inside hotplug detection, so that we can cancel it immediately upon release and so clearly identify leaks. Signed-off-by:
-
Chris Wilson authored
Keep track of the rpm wakeref used for framebuffer access so that we can cancel upon release and so more clearly identify leaks. Signed-off-by:
-
Chris Wilson authored
Keep track of the temporary rpm wakerefs used for user access to the device, so that we can cancel them upon release and clearly identify any leaks. Signed-off-by:
-
Chris Wilson authored
Keep track of our acquired wakeref for interacting with the guc, so that we can cancel it upon release and so clearly identify leaks. Signed-off-by:
-
Chris Wilson authored
Track the wakeref used for temporary access to the device, and discard it upon release so that leaks can be identified. Signed-off-by:
-
Chris Wilson authored
Keep track of our wakeref used to keep the device awake so we can catch any leak. Signed-off-by:
-
Chris Wilson authored
As debugfs has a simple pattern of taking a rpm wakeref around the user access, we can track the local reference and drop it as soon as possible. Signed-off-by:
-
Chris Wilson authored
As sysfs has a simple pattern of taking a rpm wakeref around the user access, we can track the local reference and drop it as soon as possible. Signed-off-by:
-
Chris Wilson authored
Keep hold of the local wakeref used in error handling, to cancel the tracking upon release so that leaks can be identified. Signed-off-by:
-
Chris Wilson authored
Record the wakeref used for keeping the device awake as the GPU is executing requests and be sure to cancel the tracking upon parking. Signed-off-by:
-
Chris Wilson authored
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). For regular builds, the compiler should be able to eliminate the unused local variables and the program growth should be minimal. Fwiw, it came out as a net improvement as gcc was able to refactor rpm_get and rpm_get_if_in_use together, v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual mark up for smaller more targeted patches. v3: Mention the cookie in Returns Signed-off-by:
-
Chris Wilson authored
Everytime we take a wakeref, record the stack trace of where it was taken; clearing the set if we ever drop back to no owners. For debugging a rpm leak, we can look at all the current wakerefs and check if they have a matching rpm_put. v2: Use skip=0 for unwinding the stack as it appears our noinline function doesn't appear on the stack (nor does save_stack_trace itself!) v3: Allow rpm->debug_count to disappear between inspections and so avoid calling krealloc(0) as that may return a ZERO_PTR not NULL! (Mika) v4: Show who last acquire/released the runtime pm Signed-off-by:
-
- 10 Jan, 2019 7 commits
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
The wait-for-idle used from within the shrinker_lock_uninterruptible depends on the struct_mutex locking state being known and declared to i915_request_wait(). As it is conceivable that we reach the vmap notifier from underneath struct_mutex (and so keep on relying on the mutex_trylock_recursive), we should not blindly call i915_request_wait. In the process we can remove the dubious polling to acquire struct_mutex, and simply act, or not, on a successful trylock. Signed-off-by:
-
Chris Wilson authored
If the current process is being killed (it was interrupted with SIGKILL or equivalent), it will not make any progress in page allocation and we can abort performing the shrinking on its behalf. So we can use mutex_lock_killable() instead (although this path should only be reachable from kswapd currently). Tvrtko pointed out that it should also be reachable from debugfs, which he would prefer retain its interruptiblity. As a compromise, killable is a step in the right direction! Signed-off-by:
-
Chris Wilson authored
If we find an incompletely setup vma inside the request/engine at the time of a hang, it may not have vma->pages initialised, so skip capturing the object before we iterate over NULL. Spotted by Matthew in preparation for using unpinned vma to track engine state. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110111522.11023-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
The only gen8+ platform that has the feature is BDW, but we don't define the feature flag on any BDW platform and we only have partial support in the gen8 path (irq enabling code, but no handler). The only thing we could do in the irq handler is report the error to userspace, but no one asked/cared about that since BDW was released so it is relatively safe to assume that even if we added the message no one would look at it. Just drop the dead code from the driver instead. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
commit 4a15c75c ("drm/i915: Introduce per-engine workarounds") refactored the workaround code to have functions per-engine, but didn't call any of them from logical_xcs_ring_init. Since we do have a non-RCS workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call intel_engine_init_workarounds for non-RCS engines. Note that whitelist is still RCS-only. v2: move the call to logical_ring_init (Chris) Fixes: 4a15c75c ("drm/i915: Introduce per-engine workarounds") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniele Ceraolo Spurio authored
By using the wa lists inside the live driver structures, we won't catch issues where those are incorrectly setup or corrupted. To cover this gap, update the workaround framework to allow saving the wa lists to independent structures and use them in the selftests. Suggested-by:
-
- 09 Jan, 2019 6 commits
-
-
Chris Wilson authored
In the continual quest to reduce the amount of global work required when submitting requests, replace i915_retire_requests() after allocation failure to retiring just our ring. v2: Don't forget the list iteration included an early break, so we would never throttle on the last request in the ring/timeline. v3: Use the common ring_retire_requests() References: 11abf0c5 ("drm/i915: Limit the backpressure for i915_request allocation") Signed-off-by:
-
Hans de Goede authored
Add support for PMIC MIPI sequences using the new intel_soc_pmic_exec_mipi_pmic_seq_element function. This fixes the DSI LCD panel not lighting up when not initialized by the GOP (because an external monitor was connected) on GPD win and GPD pocket devices. Specifically the LCD panel seems to need GPIO pin 9 on the PMIC to be driven high, which is done through a PMIC MIPI sequence. Before this commit if the sequence was not executed by the GOP the pin would stay low causing the LCD panel to not work. Having the MIPI sequences properly control this GPIO should also help save some power when the panel is off. Changes in v2, v3: -Only changes to other patches in this patch-set Changes in v4: -Move decoding of the raw 15 bytes PMIC MIPI sequence element into i2c-address, register-address, value and mask into the mipi_exec_pmic() function instead of passing the raw data to intel_soc_pmic_exec_mipi_pmic_seq_element() Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
Most PMIC-s use only a single i2c-address, so after verifying the i2c-address matches, we can simply pass the call to regmap_update_bits. This commit adds support for this and hooks this up for the xpower AXP288 PMIC by setting the new pmic_i2c_address field. This fixes the following errors on display on / off on a Jumper Ezpad mini 3 and an Onda V80 plus tablet, both of which use the AXP288: intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x34 reg-addr ... [drm:mipi_exec_pmic [i915]] *ERROR* mipi_exec_pmic failed, error: -95 Instead of these errors on both devices we now correctly turn on / off DLDO3 (through direct register manipulation). On the Onda V80 plus this fixes an issue with the backlight being brighter around the borders after an off / on cycle. This should also help to save some power when the display is off. Signed-off-by:
-
Hans de Goede authored
Implement the exec_mipi_pmic_seq_element callback for the CHT Whiskey Cove PMIC. On some CHT devices this fixes the LCD panel not lighting up when it was not initialized by the GOP, because an external monitor was plugged in and the GOP initialized only the external monitor. Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
DSI LCD panels describe an initialization sequence in the Video BIOS Tables using so called MIPI sequences. One possible element in these sequences is a PMIC specific element of 15 bytes. Although this is not really an ACPI opregion, the ACPI opregion code is the closest thing we have. We need to have support for these PMIC specific MIPI sequence elements somwhere. Since we already instantiate a special platform device for Intel PMICs for the ACPI PMIC OpRegion handler to bind to, with PMIC specific implementations of the OpRegion, the handling of MIPI sequence PMIC elements fits very well in the ACPI PMIC OpRegion code. This commit adds a new intel_soc_pmic_exec_mipi_pmic_seq_element() function, which is to be backed by a PMIC specific exec_mipi_pmic_seq_element callback. This function will be called by the i915 code to execture MIPI sequence PMIC elements. Reviewed-by:
-
Jani Nikula authored
Needs just a few additional includes here and there. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
- 08 Jan, 2019 2 commits
-
-
Chris Wilson authored
If we haven't shipped and enabled firmware for a particular platform, there is nothing the user can do about it. Don't scare the user with an unactionable, unidentifiable warning! <6> [310.769452] i915 0000:00:02.0: GuC: No firmware known for this platform! <4> [310.769458] [drm] HuC: No firmware known for this platform! Unify both GuC/HuC messages to include the device for which we lack the firmware, and provide the platform name as an aide-memoire. v2: Move and refine the message to common site of intel_uc_fw_fetch. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108150246.1471-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Minimal change to nuke the static buf. Reviewed-by:
-
