- 20 Oct, 2008 40 commits
-
-
Joe Korty authored
Increase the range of various posix message queue limits. Posix gives the message queue user the ability to 'trade off' the maximum size of messages with the number of possible messages that can be 'in flight'. Linux currently makes this trade off more restrictive than it needs to be. In particular, the maximum message size today can be made no smaller than 8192. This greatly restricts those applications that would like to have the ability to post large numbers of very small messages. So this task lowers the limit that the maximum message size can be set to, from 8192 to 128. It also lowers the limit that the maximum #number of messages in flight can be set to, from 10 to 1. With these changes the message queue user can make better trade offs between #messages and message size, in order to get everything to fit within the setrlimit(RLIMIT_MSGQUEUE) limit for that particular user. This patch also applies the values in /proc/sys/fs/mqueue/msg_max /proc/sys/fs/mqueue/msgsize_max as the defaults for the max #messages allowed and the max message size allowed, respectively, for those applications that do not supply these. Previously, the defaults were hardwired to 10 and 8192, respectively. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Joe Korty <joe.korty@ccur.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ken'ichi Ohmichi authored
Add the symbols 'vmlist' and offset 'vm_struct.addr' to the vmcoreinfo[1] data for i386 vmalloc translation. makedumpfile[2] needs VMALLOC_START value for distinguishing a vmalloc address or not, because it should choose suitable translation method. If applying this patch, makedumpfile will be able to take VMALLOC_START value from 'vmlist.addr'. vmcoreinfo[1]: The vmcoreinfo data has the minimum debugging information only for dump filtering. makedumpfile[2] uses it to distinguish unnecessary pages and creates a small dumpfile. makedumpfile[2]: dump filtering command https://sourceforge.net/projects/makedumpfile/Signed-off-by:
Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Signed-off-by:
-
Simon Horman authored
elfcore header memory needs to be reserved in a crash kernel. This means that the relevant code should be protected by CONFIG_CRASH_DUMP rather than CONFIG_PROC_VMCORE. Signed-off-by:
Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Simon Horman authored
The usage of elfcorehdr_addr has changed recently such that being set to ELFCORE_ADDR_MAX is used by is_kdump_kernel() to indicate if the code is executing in a kernel executed as a crash kernel. However, arch/ia64/kernel/setup.c:reserve_elfcorehdr will rest elfcorehdr_addr to ELFCORE_ADDR_MAX on error, which means any subsequent calls to is_kdump_kernel() will return 0, even though they should return 1. Ok, at this point in time there are no subsequent calls, but I think its fair to say that there is ample scope for error or at the very least confusion. This patch add an extra state, ELFCORE_ADDR_ERR, which indicates that elfcorehdr_addr was passed on the command line, and thus execution is taking place in a crashdump kernel, but vmcore can't be used for some reason. This is tested for using is_vmcore_usable() and set using vmcore_unusable(). A subsequent patch makes use of this new code. To summarise, the states that elfcorehdr_addr can now be in are as follows: ELFCORE_ADDR_MAX: not a crashdump kernel ELFCORE_ADDR_ERR: crashdump kernel but vmcore is unusable any other value: crash dump kernel and vmcore is usable Signed-off-by:
-
Simon Horman authored
o Make use of is_kdump_kernel() rather than checking elfcorehdr_addr directly. o Remove CONFIG_CRASH_DUMP as is_kdump_kernel() is safe to call anywhere o Remove CONFIG_PROC_FS as it is bogus, the check should occur regardless of if CONFIG_PROC_FS is set or not. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Simon Horman authored
IA64, PPC and SH also support the elfcorehdr command line. Signed-off-by:
-
Vivek Goyal authored
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE but also by the code which is not inside CONFIG_PROC_VMCORE. For example, is_kdump_kernel() is used by powerpc code to determine if kernel is booting after a panic then use previous kernel's TCE table. So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be able to correctly determine that we are booting after a panic and setup calgary iommu accordingly. o So remove the assumption that elfcorehdr_addr is under CONFIG_PROC_VMCORE. o Move definition of elfcorehdr_addr to arch dependent crash files. (Unfortunately crash dump does not have an arch independent file otherwise that would have been the best place). o kexec.c is not the right place as one can Have CRASH_DUMP enabled in second kernel without KEXEC being enabled. o I don't see sh setup code parsing the command line for elfcorehdr_addr. I am wondering how does vmcore interface work on sh. Anyway, I am atleast defining elfcoredhr_addr so that compilation is not broken on sh. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Oleg Nesterov authored
Now that wait_task_inactive(task, state) checks task->state == state, we can simplify the code and make this debugging check more robust. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Roland McGrath authored
This adds a kconfig option to change the /proc/PID/coredump_filter default. Fedora has been carrying a trivial patch to change the hard-wired value for this default, since Fedora 8. The default default can't change safely because there are old GDB versions out there (all before 6.7) that are confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting. Signed-off-by:
Roland McGrath <roland@redhat.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Jones <davej@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
If the coredumping is multi-threaded, format_corename() appends .%pid to the corename. This was needed before the proper multi-thread core dump support, now all the threads in the mm go into a single unified core file. Remove this special case, it is not even documented and we have "%p" and core_uses_pid. Signed-off-by:
-
Adrian Bunk authored
ptrace_untrace() can now become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Lai Jiangshan authored
bitmap_scnprintf_len() is not used now, so we remove it. Otherwise we have to maintain it and make its return value always equal to bitmap_scnprintf()'s return value. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by:
-
Lai Jiangshan authored
1) seq_file excepts that m->count == m->size when it's buf is full, so current code will causes bugs when buf is overflow. 2) There is not too good that cpuset accesses struct seq_file's fields directly. Signed-off-by:
Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by:
-
Lai Jiangshan authored
seq_cpumask_list(), seq_nodemask_list() are very like seq_cpumask(), seq_nodemask(), but they print human readable string. Signed-off-by:
-
Lai Jiangshan authored
"m->count + len < m->size" is true commonly, so bitmap_scnprintf() is commonly called. this fix saves a call to bitmap_scnprintf_len(). Signed-off-by:
-
Rakib Mullick authored
Remove the use of int cpus_nonempty variable from 'update_flag' function. Signed-off-by:
Md.Rakib H. Mullick <rakib.mullick@gmail.com> Acked-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Allocate all page_cgroup at boot and remove page_cgroup poitner from struct page. This patch adds an interface as struct page_cgroup *lookup_page_cgroup(struct page*) All FLATMEM/DISCONTIGMEM/SPARSEMEM and MEMORY_HOTPLUG is supported. Remove page_cgroup pointer reduces the amount of memory by - 4 bytes per PAGE_SIZE. - 8 bytes per PAGE_SIZE if memory controller is disabled. (even if configured.) On usual 8GB x86-32 server, this saves 8MB of NORMAL_ZONE memory. On my x86-64 server with 48GB of memory, this saves 96MB of memory. I think this reduction makes sense. By pre-allocation, kmalloc/kfree in charge/uncharge are removed. This means - we're not necessary to be afraid of kmalloc faiulre. (this can happen because of gfp_mask type.) - we can avoid calling kmalloc/kfree. - we can avoid allocating tons of small objects which can be fragmented. - we can know what amount of memory will be used for this extra-lru handling. I added printk message as "allocated %ld bytes of page_cgroup" "please try cgroup_disable=memory option if you don't want" maybe enough informative for users. Signed-off-by:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch makes page_cgroup->flags to be atomic_ops and define functions (and macros) to access it. Before trying to modify memory resource controller, this atomic operation on flags is necessary. Most of flags in this patch is for LRU and modfied under mz->lru_lock but we'll add another flags which is not for LRU soon. For example, we'll place LOCK bit on flags field. We need atomic operation to modify LRU bit without LOCK. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Some obvious optimization to memcg. I found mem_cgroup_charge_statistics() is a little big (in object) and does unnecessary address calclation. This patch is for optimization to reduce the size of this function. And res_counter_charge() is 'likely' to succeed. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
There are not-on-LRU pages which can be mapped and they are not worth to be accounted. (becasue we can't shrink them and need dirty codes to handle specical case) We'd like to make use of usual objrmap/radix-tree's protcol and don't want to account out-of-vm's control pages. When special_mapping_fault() is called, page->mapping is tend to be NULL and it's charged as Anonymous page. insert_page() also handles some special pages from drivers. This patch is for avoiding to account special pages. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch tries to make page->mapping to be NULL before mem_cgroup_uncharge_cache_page() is called. "page->mapping == NULL" is a good check for "whether the page is still radix-tree or not". This patch also adds BUG_ON() to mem_cgroup_uncharge_cache_page(); Signed-off-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
While page-cache's charge/uncharge is done under page_lock(), swap-cache isn't. (anonymous page is charged when it's newly allocated.) This patch moves do_swap_page()'s charge() call under lock. I don't see any bad problem *now* but this fix will be good for future for avoiding unnecessary racy state. Signed-off-by:
-
Lai Jiangshan authored
Since we introduced rcu for read side, spin_lock is used only for update. But we always hold cgroup_lock() when update, so spin_lock() is not need. Additional cleanup: 1) include linux/rcupdate.h explicitly 2) remove unused variable cur_devcgroup in devcgroup_update_access() Signed-off-by:
"Serge E. Hallyn" <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Li Zefan authored
Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
-
Li Zefan authored
This saves 40 bytes on my x86_32 box. Signed-off-by:
-
Paul Menage authored
The choice of real/dummy declaration for cgroup_mm_owner_callbacks() shouldn't be based on CONFIG_MM_OWNER, but on CONFIG_CGROUPS. Otherwise kernel/exit.c fails to compile when something other than a cgroups controller selects CONFIG_MM_OWNER Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Paul Menage authored
Rather than pre-generating the entire text for the "tasks" file each time the file is opened, we instead just generate/update the array of process ids and use a seq_file to report these to userspace. All open file handles on the same "tasks" file can share a pid array, which may be updated any time that no thread is actively reading the array. By sharing the array, the potential for userspace to DoS the system by opening many handles on the same "tasks" file is removed. [Based on a patch by Lai Jiangshan, extended to use seq_file] Signed-off-by:
-
Lai Jiangshan authored
put_css_set_taskexit may be called when find_css_set is called on other cpu. And the race will occur: put_css_set_taskexit side find_css_set side | atomic_dec_and_test(&kref->refcount) | /* kref->refcount = 0 */ | .................................................................... | read_lock(&css_set_lock) | find_existing_css_set | get_css_set | read_unlock(&css_set_lock); .................................................................... __release_css_set | .................................................................... | /* use a released css_set */ | [put_css_set is the same. But in the current code, all put_css_set are put into cgroup mutex critical region as the same as find_css_set.] [akpm@linux-foundation.org: repair comments] [menage@google.com: eliminate race in css_set refcounting] Signed-off-by: -
Eric Sesterhenn authored
A corrupted extent for the extent file itself may try to get an impossible extent, causing a deadlock if I see it correctly. Check the inode number after the first_blocks checks and fail if it's the extent file, as according to the spec the extent file should have no extent for itself. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Alan Cox authored
hfsplus: O_LARGEFILE checking is missing Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8490 From: Alan Cox <alan@redhat.com> Reported-by:
didier <did447@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Eric Sandeen authored
A very large directory with many read failures (either due to storage problems, or due to invalid size & blocks from corruption) will generate a printk storm as the filesystem continues to try to read all the blocks. This flood of messages can tie up the box until it is complete - which may be a very long time, especially for very large corrupted values. This is fixed by only reporting the corruption once each time we try to read the directory. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by:
-
Aneesh Kumar K.V authored
For blocksize < pagesize we need to remove blocks that got allocated in block_write_begin() if we fail with ENOSPC for later blocks. block_write_begin() internally does this if it allocated page locally. This makes sure we don't have blocks outside inode.i_size during ENOSPC. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Eugene Dashevsky authored
This fixes a bug where readdir() would return a directory entry twice if there was a hash collision in an hash tree indexed directory. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Eugene Dashevsky <eugene@ibrix.com> Signed-off-by:
Mike Snitzer <msnitzer@ibrix.com> Signed-off-by:
-
Hidehiro Kawai authored
In ordered mode, if a file data buffer being dirtied exists in the committing transaction, we write the buffer to the disk, move it from the committing transaction to the running transaction, then dirty it. But we don't have to remove the buffer from the committing transaction when the buffer couldn't be written out, otherwise it would miss the error and the committing transaction would not abort. This patch adds an error check before removing the buffer from the committing transaction. Signed-off-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Hidehiro Kawai authored
If the journal doesn't abort when it gets an IO error in file data blocks, the file data corruption will spread silently. Because most of applications and commands do buffered writes without fsync(), they don't notice the IO error. It's scary for mission critical systems. On the other hand, if the journal aborts whenever it gets an IO error in file data blocks, the system will easily become inoperable. So this patch introduces a filesystem option to determine whether it aborts the journal or just call printk() when it gets an IO error in file data. If you mount a ext3 fs with data_err=abort option, it aborts on file data write error. If you mount it with data_err=ignore, it doesn't abort, just call printk(). data_err=ignore is the default. Signed-off-by:
-
Mingming Cao authored
We could run into ENOSPC error on ext3, even when there is free blocks on the filesystem. The problem is triggered in the case the goal block group has 0 free blocks , and the rest block groups are skipped due to the check of "free_blocks < windowsz/2". Current code could fall back to non reservation allocation to prevent early ENOSPC after examing all the block groups with reservation on , but this code was bypassed if the reservation window is turned off already, which is true in this case. This patch fixed two issues: 1) We don't need to turn off block reservation if the goal block group has 0 free blocks left and continue search for the rest of block groups. Current code the intention is to turn off the block reservation if the goal allocation group has a few (some) free blocks left (not enough for make the desired reservation window),to try to allocation in the goal block group, to get better locality. But if the goal blocks have 0 free blocks, it should leave the block reservation on, and continues search for the next block groups,rather than turn off block reservation completely. 2) we don't need to check the window size if the block reservation is off. The problem was originally found and fixed in ext4. Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Josef Bacik authored
When trying to resize a ext3 fs and you run out of reserved gdt blocks, you get an error that doesn't actually tell you what went wrong, it just says that the gdb it picked is not correct, which is the case since you don't have any reserved gdt blocks left. This patch adds a check to make sure you have reserved gdt blocks to use, and if not prints out a more relevant error. Signed-off-by:
Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Dilger <adilger@sun.com> Signed-off-by:
-
Hidehiro Kawai authored
Currently, original metadata buffers are dirtied when they are unfiled whether the journal has aborted or not. Eventually these buffers will be written-back to the filesystem by pdflush. This means some metadata buffers are written to the filesystem without journaling if the journal aborts. So if both journal abort and system crash happen at the same time, the filesystem would become inconsistent state. Additionally, replaying journaled metadata can overwrite the latest metadata on the filesystem partly. Because, if the journal aborts, journaled metadata are preserved and replayed during the next mount not to lose uncheckpointed metadata. This would also break the consistency of the filesystem. This patch prevents original metadata buffers from being dirtied on abort by clearing BH_JBDDirty flag from those buffers. Thus, no metadata buffers are written to the filesystem without journaling. Signed-off-by:
-
Hidehiro Kawai authored
If we failed to write metadata buffers to the journal space and succeeded to write the commit record, stale data can be written back to the filesystem as metadata in the recovery phase. To avoid this, when we failed to write out metadata buffers, abort the journal before writing the commit record. Signed-off-by:
-
Richard Holden authored
The phone_device array is covered by the phone_lock mutex in all cases and request_module no longer needs the BKL so we can remove the only remaining instance of the BKL from phonedev. Signed-off-by:
Richard Holden <aciddeath@gmail.com> Signed-off-by:
-
