If we have that hook, we know the driver handles bd->last == true in
a smart fashion. If it does, even for multiple hardware queues, it's
a good idea to flush batches of requests to the device, if we have
batches of requests from the submitter.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we are issuing a list of requests, we know if we're at the last one.
If we fail issuing, ensure that we call ->commits_rqs() to flush any
potential previous requests.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need this for blk-mq to kick things into gear, if we told it that
we had more IO coming, but then failed to deliver on that promise.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need this for blk-mq to kick things into gear, if we told it that
we had more IO coming, but then failed to deliver on that promise.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Split the command submission and the SQ doorbell ring, and add the
doorbell ring as our ->commit_rqs() hook. This allows a list of
requests to be issued, with nvme only writing the SQ update when
it's necessary. This is more efficient if we have lists of requests
to issue, particularly on virtualized hardware, where writing the
SQ doorbell is more expensive than on real hardware. For those cases,
performance increases of 2-3x have been observed.

The use case for this is plugged IO, where blk-mq flushes a batch of
requests at the time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq passes information to the hardware about any given request being
the last that we will issue in this sequence. The point is that hardware
can defer costly doorbell type writes to the last request. But if we run
into errors issuing a sequence of requests, we may never send the request
with bd->last == true set. For that case, we need a hook that tells the
hardware that nothing else is coming right now.

For failures returned by the drivers ->queue_rq() hook, the driver is
responsible for flushing pending requests, if it uses bd->last to
optimize that part. This works like before, no changes there.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Only do it if we have requests for multiple queues in the same
plug.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

I recently found some code which called blk_mq_free_map_and_requests()
with a NULL set->tags pointer.  I fixed the caller, but it seems like a
good idea to add a NULL check here as well.  Now we can call:

	blk_mq_free_tag_set(set);
	blk_mq_free_tag_set(set);

twice in a row and it's harmless.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Smatch complains that there is an off by one if the allocation fails in:

	DMABuffer = atari_stram_alloc(BUFFER_SIZE+512, "ataflop");

In that situation, "i" would be point to one element beyond the end of
the unit[] array.

There is a second bug because the error handling calls
blk_mq_free_tag_set(&unit[i].tag_set); regardless of whether
"disk->queue" is NULL or non-NULL.  So if blk_mq_init_sq_queue() fails,
then that means unit[i].tag_set->tags is NULL and it leads to an Oops.

It's easiest to call put_disk() before the goto to clean up the partial
iteration.  Then the earlier unit[] elements are fully allocated so we
can remove the checks whether "disk->queue" is NULL and the code is
simpler.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Give a interface to adjust io timeout(ms) by device.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We recently got a stack by syzkaller like this:

BUG: sleeping function called from invalid context at mm/slab.h:361
in_atomic(): 1, irqs_disabled(): 0, pid: 6644, name: blkid
INFO: lockdep is turned off.
CPU: 1 PID: 6644 Comm: blkid Not tainted 4.4.163-514.55.6.9.x86_64+ #76
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 0000000000000000 5ba6a6b879e50c00 ffff8801f6b07b10 ffffffff81cb2194
 0000000041b58ab3 ffffffff833c7745 ffffffff81cb2080 5ba6a6b879e50c00
 0000000000000000 0000000000000001 0000000000000004 0000000000000000
Call Trace:
 <IRQ>  [<ffffffff81cb2194>] __dump_stack lib/dump_stack.c:15 [inline]
 <IRQ>  [<ffffffff81cb2194>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
 [<ffffffff8129a981>] ___might_sleep+0x291/0x490 kernel/sched/core.c:7675
 [<ffffffff8129ac33>] __might_sleep+0xb3/0x270 kernel/sched/core.c:7637
 [<ffffffff81794c13>] slab_pre_alloc_hook mm/slab.h:361 [inline]
 [<ffffffff81794c13>] slab_alloc_node mm/slub.c:2610 [inline]
 [<ffffffff81794c13>] slab_alloc mm/slub.c:2692 [inline]
 [<ffffffff81794c13>] kmem_cache_alloc_trace+0x2c3/0x5c0 mm/slub.c:2709
 [<ffffffff81cbe9a7>] kmalloc include/linux/slab.h:479 [inline]
 [<ffffffff81cbe9a7>] kzalloc include/linux/slab.h:623 [inline]
 [<ffffffff81cbe9a7>] kobject_uevent_env+0x2c7/0x1150 lib/kobject_uevent.c:227
 [<ffffffff81cbf84f>] kobject_uevent+0x1f/0x30 lib/kobject_uevent.c:374
 [<ffffffff81cbb5b9>] kobject_cleanup lib/kobject.c:633 [inline]
 [<ffffffff81cbb5b9>] kobject_release+0x229/0x440 lib/kobject.c:675
 [<ffffffff81cbb0a2>] kref_sub include/linux/kref.h:73 [inline]
 [<ffffffff81cbb0a2>] kref_put include/linux/kref.h:98 [inline]
 [<ffffffff81cbb0a2>] kobject_put+0x72/0xd0 lib/kobject.c:692
 [<ffffffff8216f095>] put_device+0x25/0x30 drivers/base/core.c:1237
 [<ffffffff81c4cc34>] delete_partition_rcu_cb+0x1d4/0x2f0 block/partition-generic.c:232
 [<ffffffff813c08bc>] __rcu_reclaim kernel/rcu/rcu.h:118 [inline]
 [<ffffffff813c08bc>] rcu_do_batch kernel/rcu/tree.c:2705 [inline]
 [<ffffffff813c08bc>] invoke_rcu_callbacks kernel/rcu/tree.c:2973 [inline]
 [<ffffffff813c08bc>] __rcu_process_callbacks kernel/rcu/tree.c:2940 [inline]
 [<ffffffff813c08bc>] rcu_process_callbacks+0x59c/0x1c70 kernel/rcu/tree.c:2957
 [<ffffffff8120f509>] __do_softirq+0x299/0xe20 kernel/softirq.c:273
 [<ffffffff81210496>] invoke_softirq kernel/softirq.c:350 [inline]
 [<ffffffff81210496>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
 [<ffffffff82c2cd7b>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
 [<ffffffff82c2cd7b>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
 [<ffffffff82c2bc25>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:746
 <EOI>  [<ffffffff814cbf40>] ? audit_kill_trees+0x180/0x180
 [<ffffffff8187d2f7>] fd_install+0x57/0x80 fs/file.c:626
 [<ffffffff8180989e>] do_sys_open+0x45e/0x550 fs/open.c:1043
 [<ffffffff818099c2>] SYSC_open fs/open.c:1055 [inline]
 [<ffffffff818099c2>] SyS_open+0x32/0x40 fs/open.c:1050
 [<ffffffff82c299e1>] entry_SYSCALL_64_fastpath+0x1e/0x9a

In softirq context, we call rcu callback function delete_partition_rcu_cb(),
which may allocate memory by kzalloc with GFP_KERNEL flag. If the
allocation cannot be satisfied, it may sleep. However, That is not allowed
in softirq contex.

Although we found this problem on linux 4.4, the latest kernel version
seems to have this problem as well. And it is very similar to the
previous one:
	https://lkml.org/lkml/2018/7/9/391

Fix it by using RCU workqueue, which allows sleep.
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we yank a 'same_queue_rq' request off the plug list, we should
also decrement the cached request count.

Fixes: 5f0ed774 ("block: sum requests in the plug structure")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

__vdc_tx_trigger should only loop on EAGAIN a finite
number of times.

See commit adddc32d ("sunvnet: Do not spin in an
infinite loop when vio_ldc_send() returns EAGAIN") for detail.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This isn't exactly the same as the previous count, as it includes
requests for all devices. But that really doesn't matter, if we have
more than the threshold (16) queued up, flush it. It's not worth it
to have an expensive list loop for this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There are no more users relying on blk-mq request states to prevent
double completions, so replace the relatively expensive cmpxchg operation
with WRITE_ONCE.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The scsi timeout error handling had been directly updating the block
layer's request state to prevent a error handling and a natural completion
from completing the same request twice. Fix this layering violation
by having scsi control the fate of its commands with scsi owned flags
rather than use blk-mq's.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A driver may have internal state to cleanup if we're pretending a request
didn't complete. Return 'false' if the command wasn't actually completed
due to the timeout error injection, and true otherwise.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's pointless to do so, we are by definition on the CPU we want/need
to be, as that's the one waiting for a completion event.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Right now we immediately bail if need_resched() is true, but
we need to do at least one loop in case we have entries waiting.
So just invert the need_resched() check, putting it at the
bottom of the loop.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.

Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It doesn't set HIPRI on the bio, so polling for it is pretty silly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We always pass in -1 now and none of the callers use the tag value,
remove the parameter.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we want to support async IO polling, then we have to allow finding
completions that aren't just for the one we are looking for. Always pass
in -1 to the mq_ops->poll() helper, and have that return how many events
were found in this poll loop.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.

This patch fixes the issue by the following approach:

1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs

2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj

3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.

This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If the first request allocated and issued by a process is a passhthrough
request, we don't set up an IO context for it. Ensure that
blk_mq_sched_assign_ioc() ignores a NULL io_context.

Fixes: e2b3fa5a ("block: Remove bio->bi_ioc")
Reported-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For the synchronous I/O path case (read(), write() etc system calls), a
BIO I/O priority is not initialized until the execution of
blk_init_request_from_bio() when the BIO is submitted and a request
initialized for the BIO execution. This is due to the ki_ioprio field of
the struct kiocb defined on stack being always initialized to
IOPRIO_CLASS_NONE, regardless of the calling process I/O context ioprio
value set with ioprio_set(). This late initialization can result in the
BIO being merged to pending requests even when the I/O priorities
differ.

Fix this by initializing the ki_iopriority field of on stack struct
kiocb using the get_current_ioprio() helper, ensuring that all BIOs
allocated and submitted for the system call execution see the correct
intended I/O priority early. With this, since a BIO I/O priority is
always set to the intended effective value for both the sync and async
path, blk_init_request_from_bio() can be simplified.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Growing in size a high priority request by merging it with a lower
priority BIO or request will increase the request execution time. This
is the opposite result of the desired effect of high I/O priorities,
namely getting low I/O latencies. Prevent merging of requests and BIOs
that have different I/O priorities to fix this.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For cases when the application does not specify aio_reqprio for an aio,
fallback to use get_current_ioprio() to obtain the task I/O priority
last set using ioprio_set() rather than the hardcoded IOPRIO_CLASS_NONE
value.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Define get_current_ioprio() as an inline helper to obtain the caller
I/O priority from its task I/O context. Use this helper in
blk_init_request_from_bio() to set a request ioprio.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio->bi_ioc is never set so always NULL. Remove references to it in
bio_disassociate_task() and in rq_ioc() and delete this field from
struct bio. With this change, rq_ioc() always returns
current->io_context without the need for a bio argument. Further
simplify the code and make it more readable by also removing this
helper, which also allows to simplify blk_mq_sched_assign_ioc() by
removing its bio argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Comment the use of the IOCB_FLAG_IOPRIO aio flag similarly to the
IOCB_FLAG_RESFD flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's specifically looking for a given request, which we will not be
supporting going forward. Also kill the qla2xxx poll implementation
as that's the only user of the nvme-fc poll, and the now unused
->poll_queue() hook.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently only really support sync poll, ie poll with 1 IO in flight.
This prepares us for supporting async poll.

Note that the returned value isn't necessarily 100% accurate. If poll
races with IRQ completion, we assume that the fact that the task is now
runnable means we found at least one entry. In reality it could be more
than 1, or not even 1. This is fine, the caller will just need to take
this into account.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For the core poll helper, the task state setting don't need to imply any
atomics, as it's the current task itself that is being modified and
we're not going to sleep.

For IRQ driven, the wakeup path have the necessary barriers to not need
us using the heavy handed version of the task state setting.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need a better way of configuring this, and given that polling is
(still) a bit niche, let's default to using 0 poll queues. That way
we'll have the same read/write/poll behavior as 4.20, and users that
want to test/use polling are required to do manual configuration of the
number of poll queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With the locking removed, it's unused. Kill it.

Fixes: 503f620f ("floppy: remove queue_lock around floppy_end_request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
  mm, page_alloc: check for max order in hot path
  scripts/spdxcheck.py: make python3 compliant
  tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
  lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
  mm/vmstat.c: fix NUMA statistics updates
  mm/gup.c: fix follow_page_mask() kerneldoc comment
  ocfs2: free up write context when direct IO failed
  scripts/faddr2line: fix location of start_kernel in comment
  mm: don't reclaim inodes with many attached pages
  mm, memory_hotplug: check zone_movable in has_unmovable_pages
  mm/swapfile.c: use kvzalloc for swap_info_struct allocation
  MAINTAINERS: update OMAP MMC entry
  hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
  kernel/sched/psi.c: simplify cgroup_move_task()
  z3fold: fix possible reclaim races