- 23 Oct, 2016 9 commits
-
-
Brian Masney authored
Remove blank line between MODULE_DEVICE_TABLE() and its corresponding structure for consistency with the other device table entries. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Brian Masney authored
Use the return value from isl29018_set_integration_time() as the return value for isl29018_chip_init() since this is the last piece of work inside that function. Signed-off-by:
-
Brian Masney authored
Change multiline comments from: /* line1 * line2 * ... */ to /* * line1 * line2 * ... */ Signed-off-by:
-
Brian Masney authored
isl29035_detect() did not just do chip detection. Move functionality directly into isl29018_chip_init() to avoid naming confusion. Signed-off-by:
-
Brian Masney authored
Add newlines to improve code readability in preparation for moving the driver out of staging. Signed-off-by:
-
Jonathan Cameron authored
There is still stuff to be done in the remaining drivers but pretty much nothing was left from this original TODO. Sorry Greg, should have been keeping this up to date. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
sayli karnik authored
mlock is intended to protect only switches between modes. Given this driver doesn't support more than one mode (sysfs polled reads only), replace mlock with a local mutex lock. Signed-off-by:
sayli karnik <karniksayli1995@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute instead of using IIO_DEVICE_ATTR() macro. Move code from the functions associated with IIO_DEVICE_ATTR() into respective read and write hooks with the mask set to IIO_CHAN_INFO_SAMP_FREQ. Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
sayli karnik authored
Attributes that were once privately defined become standard with time and hence a special global define is used. Hence update driver ad7152 to use IIO_CHAN_INFO_SAMP_FREQ which is a global define instead of IIO_DEV_ATTR_SAMP_FREQ. Move functionality from IIO_DEV_ATTR_SAMP_FREQ attribute into IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute. Modify ad7152_read_raw() and ad7152_write_raw() to allow reading and writing the element as well. Also add a lock in the driver's private data. Signed-off-by:
-
- 11 Oct, 2016 9 commits
-
-
Brian Masney authored
Add documentation from the ISL29018 Data Sheet (FN6619.4, Oct 8, 2012) about the infrared suppression that can be controlled with the proximity_on_chip_ambient_infrared_suppression sysfs attribute. Signed-off-by:
-
Brian Masney authored
Fix the following warnings from checkpatch: WARNING: DT compatible string "isil,isl29018" appears un-documented -- check ./Documentation/devicetree/bindings/ WARNING: DT compatible string "isil,isl29023" appears un-documented -- check ./Documentation/devicetree/bindings/ WARNING: DT compatible string "isil,isl29035" appears un-documented -- check ./Documentation/devicetree/bindings/ Signed-off-by:
-
Sandhya Bankar authored
This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Hence moving functionality from IIO_DEV_ATTR_SAMP_FREQ attribute into IIO_CHAN_INFO_SAMP_FREQ handlers. Also Adding ade7758_read_raw() and ade7758_write_raw() to allow reading/writing the element as well. Signed-off-by:
Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by:
-
Hans de Goede authored
Recently the kernel has gotten support in the iio subsystem for a number of new accelerometers from mCube, Memsic and MiraMEMS. This commit adds the vendor prefixes already used for these vendors in Documentation/devicetree/bindings/i2c/trivial-devices.txt to vendor-prefixes.txt. The "full" company names were taken from the company's websites: http://www.mcubemems.com/ http://www.memsic.com/ http://www.miramems.com/en/Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Add an iio driver for the MiraMEMS DA280 3-axis 14-bit accelerometer, as well as for the DA226 which is a fully compatible 2-axis version. Datasheets for the DA280 and DA226 can be found at the manufacturers site: http://www.miramems.com/en/products.asp?list=1Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eva Rachel Retuya authored
This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute instead of using IIO_DEV_ATTR_SAMP_FREQ() macro. Move code from the functions associated with IIO_DEV_ATTR_SAMP_FREQ() into respective read and write hooks with the mask set to IIO_CHAN_INFO_SAMP_FREQ. Signed-off-by:
-
Hans de Goede authored
This driver is based on the DA311 Android driver which can be found here: https://git.matricom.net/Firmware/kernel_amlogic_meson-common/tree/1e70113a5befd07debb68f537156def84c5be57a/drivers/amlogic/input/sensor the mir3da_* files are the DA311 driver. Unfortunately there is no datasheet. Signed-off-by:
-
Hans de Goede authored
Add a driver for the Domintech ARD10 3-axis Accelerometer, based on the android driver found here: https://github.com/domintech/dmard10Signed-off-by:
-
Hans de Goede authored
Add compatible strings for 2 accelerometers which follow the trivial i2c device bindings and have been supported by the iio subsystem for a while now. Signed-off-by:
-
- 08 Oct, 2016 2 commits
-
-
Eva Rachel Retuya authored
This driver predates the availability of IIO_CHAN_INFO_OVERSAMPLING_RATIO attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_OVERSAMPLING_RATIO to implement the oversampling_ratio attribute instead of using IIO_DEVICE_ATTR() macro. Move code from the functions associated with IIO_DEVICE_ATTR() into the read_raw hook as well as add the write_raw hook with both masks set to IIO_CHAN_INFO_OVERSAMPLING_RATIO. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Eva Rachel Retuya authored
The oversampling ratio is controlled using the oversampling pins, OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control bit. The gpio connected to the OS2 pin is not being set correctly, only OS0 and OS1 pins are being set. Fix the typo to allow proper control of the oversampling pins. Signed-off-by:
-
- 03 Oct, 2016 6 commits
-
-
Ico Doornekamp authored
Fixes two cases of 'cast to restricted __le16' as reported by sparse. Signed-off-by:
Ico Doornekamp <ico@pruts.nl> Signed-off-by:
-
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3561 1152 8 4721 1271 drivers/staging/iio/cdc/ad7150.o File size after: text data bss dec hex filename 3625 1088 8 4721 1271 drivers/staging/iio/cdc/ad7150.o Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 11013 6096 0 17109 42d5 drivers/staging/iio/addac/adt7316.o File size after: text data bss dec hex filename 11141 5968 0 17109 42d5 drivers/staging/iio/addac/adt7316.o Signed-off-by: -
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3295 768 0 4063 fdf drivers/staging/iio/adc/ad7816.o File size after: text data bss dec hex filename 3359 736 0 4095 fff drivers/staging/iio/adc/ad7816.o Signed-off-by: -
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 6271 672 776 7719 1e27 drivers/staging/iio/adc/ad7280a.o File size after: text data bss dec hex filename 6335 608 776 7719 1e27 drivers/staging/iio/adc/ad7280a.o Signed-off-by: -
Anchal Jain authored
Add a blank line after the function to increase the readability of the code. Signed-off-by:
Anchal Jain <anchalj109@gmail.com> Signed-off-by:
-
- 01 Oct, 2016 9 commits
-
-
William Breathitt Gray authored
The ACCES 104-QUAD-8 is a general purpose quadrature encoder counter/interface board. The 104-QUAD-8 is capable of monitoring the outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit dual-axis quadrature counter chips. Core functions handled by the LS7266R1, such as direction and total count, are available. Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and also clears the counter's respective error flag. Although the counters have a 25-bit range, only the lower 24 bits may be set, either directly or via a counter's preset attribute. Interrupts are not supported by this driver. This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
William Breathitt Gray authored
Quadrature encoders, such as rotary encoders and linear encoders, are devices which are capable of encoding the relative position and direction of motion of a shaft. This patch introduces several IIO constants for supporting quadrature encoder counter devices. IIO_COUNT: Current count (main data provided by the counter device) IIO_INDEX: Counter device index value Signed-off-by:
-
Marcin Malagowski authored
This patch adds minimal driver for the Honeywell Amplified Basic Pressure sensors series. Sensors are pretty simple but are available in many variants: - psi/mbar/kPa output, - analog/i2c/spi, - gage/differential measurement, - different measure ranges etc. Refer to datasheets for more details: http://sensing.honeywell.com/honeywell-sensing-basic-board-mount-pressure-sensors-abp-series-datasheet-323005128-c-en.pdf http://sensing.honeywell.com/index.php%3Fci_id%3D45841 Driver internals: - i2c only. measure request is done by the SMBUS QUICK cmd, so if the i2c bus doesn't support it, it is required to send a dummy byte to trigger measurement, - since iio sysfs expects kilopascals, mbar-variants are treated as their respective kPa-s, hence i2c id-table has doubled entries in one line: { "abp060mg", ABP006KG }, { "abp006kg", ABP006KG }, - psi-variants have prescaled values in config, - no temperature reads yet. Work remained: - optional temperature channel, - SPI support, - DT binding. Changes since v1: - mutex is now locked in read_raw(), - corrected error codes, - fixed coding style issues, - renamed few defines and functions abp -> abp060mg (some structs left as they were to keep the sensible meaning). Signed-off-by:
Marcin Malagowski <mrc@bourne.st> Signed-off-by:
-
Brian Masney authored
Add a check to isl29018_write_raw() to ensure that the chip is not in a suspended state. This makes the code consistent with what is present in isl29018_read_raw(). Signed-off-by:
-
Brian Masney authored
When the chip is in a suspended state, isl29018_read_raw() will return -EBUSY. Change the function so that it only has a single exit point. Signed-off-by:
-
Brian Masney authored
in_illuminance_scale_available_show() references the isl29018_chip->int_time variable in three places inside a for loop. The value of the int_time variable can be updated by the isl29018_set_integration_time() function, which is called by the isl29018_write_raw() function. isl29018_write_raw() locks a mutex specific to this driver when the integration time variable is updated. Signed-off-by:
-
Brian Masney authored
Use the IIO_DEVICE_ATTR_RO and IIO_DEVICE_ATTR_RW macros to create the device attributes. Signed-off-by:
-
Brian Masney authored
Add new macros: IIO_ATTR_RO, IIO_ATTR_WO, IIO_ATTR_RW, IIO_DEVICE_ATTR_RO, IIO_DEVICE_ATTR_WO and IIO_DEVICE_ATTR_RW to reduce the amount of boiler plate code that is needed for creating new attributes. This mimics the *_RO, *_WO, and *_RW macros that are found in include/linux/device.h and include/linux/sysfs.h. Signed-off-by:
-
Bhumika Goyal authored
The event_attrs field of iio_info structure is only initialized once whenever an object of iio_info is created. After that this field is never modified again anywhere in the kernel. So, declare event_attrs field of iio_info as a const struct attribute_group. Checked for occurences throughout the kernel using grep and coccinelle. Signed-off-by:
-
- 27 Sep, 2016 5 commits
-
-
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: drivers/staging/iio/light/tsl2583.o text data bss dec hex filename 6529 1052 0 7581 1d9d drivers/staging/iio/light/tsl2583.o File size after: drivers/staging/iio/light/tsl2583.o text data bss dec hex filename 6593 988 0 7581 1d9d drivers/staging/iio/light/tsl2583.o Signed-off-by: -
Bhumika Goyal authored
Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: drivers/staging/iio/adc/ad7280a.o text data bss dec hex filename 6487 584 776 7847 1ea7 drivers/staging/iio/adc/ad7280a.o File size after: drivers/staging/iio/adc/ad7280a.o text data bss dec hex filename 6551 544 776 7871 1ebf drivers/staging/iio/adc/ad7280a.o Signed-off-by: -
Brian Masney authored
Fixes warning found by make W=2: warning: comparison between signed and unsigned integer expressions Signed-off-by:
-
Brian Masney authored
Changed the processing of IIO_CHAN_INFO_INT_TIME in isl29018_write_raw() to unlock the mutex and return at the end of the function if invalid input is passed in. This makes the error handling code consistent with the processing of IIO_CHAN_INFO_CALIBSCALE and IIO_CHAN_INFO_SCALE within the same function. Signed-off-by:
-
Brian Masney authored
Removes unused variable and associated #defines that was found using make W=1. Signed-off-by:
-
