- 29 Aug, 2017 40 commits
-
-
Douglas Leung authored
Implement fused multiply-add with correct accuracy. Fused multiply-add operation has better accuracy than respective sequential execution of multiply and add operations applied on the same inputs. This is because accuracy errors accumulate in latter case. This patch implements fused multiply-add with the same accuracy as it is implemented in hardware, using 64-bit intermediate calculations. One test case example (raw bits) that this patch fixes: MADDF.S fd,fs,ft: fd = 0x22575225 fs = ft = 0x3727c5ac Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
Douglas Leung <douglas.leung@imgtec.com> Signed-off-by:
Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by:
Goran Ferenc <goran.ferenc@imgtec.com> Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtec.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: Bo Hu <bohu@google.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jin Qian <jinqian@google.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: <stable@vger.kernel.org> # 4.7+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16890/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aleksandar Markovic authored
Fix definition and usage of "maddf_flags" enumeration. Avoid duplicate definition and apply more common capitalization. This patch does not change any scenario. It just makes MADDF and MSUBF emulation code more readable and easier to maintain, and hopefully prevents future bugs as well. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Bo Hu <bohu@google.com> Cc: Douglas Leung <douglas.leung@imgtec.com> Cc: Jin Qian <jinqian@google.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Petar Jovanovic <petar.jovanovic@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: <stable@vger.kernel.org> # 4.7+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16889/Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is +0 or -0, and the third input is also +0 or -0. Depending on the signs of inputs, certain special cases must be handled. A relevant example: MADDF.S fd,fs,ft: If fs contains +0.0, ft contains -0.0, and fd contains 0.0, fd is going to contain +0.0 (without this patch, it used to contain -0.0). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of two multiplicands is infinity. The correct behavior in such cases is affected by the nature of third input. Cases of addition of infinities with opposite signs and subtraction of infinities with same signs may arise and must be handles separately. Also, the value od flags argument (that determines whether the instruction is MADDF or MSUBF) affects the outcome. Relevant examples: MADDF.S fd,fs,ft: If fs contains +inf, ft contains +inf, and fd contains -inf, fd is going to contain indef (without this patch, it used to contain -inf). MSUBF.S fd,fs,ft: If fs contains +inf, ft contains 1.0, and fd contains +0.0, fd is going to contain -inf (without this patch, it used to contain +inf). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the cases of <MADDF|MSUBF>.<D|S> when any of three inputs is any NaN. Correct behavior of <MADDF|MSUBF>.<D|S> fd, fs, ft is following: - if any of inputs is sNaN, return a sNaN using following rules: if only one input is sNaN, return that one; if more than one input is sNaN, order of precedence for return value is fd, fs, ft - if no input is sNaN, but at least one of inputs is qNaN, return a qNaN using following rules: if only one input is qNaN, return that one; if more than one input is qNaN, order of precedence for return value is fd, fs, ft The previous code contained correct handling of some above cases, but not all. Also, such handling was scattered into various cases of "switch (CLPAIR(xc, yc))" statement, and elsewhere. With this patch, this logic is placed in one place, and "switch (CLPAIR(xc, yc))" is significantly simplified. A relevant example: MADDF.S fd,fs,ft: If fs contains qNaN1, ft contains qNaN2, and fd contains qNaN3, fd is going to contain qNaN3 (without this patch, it used to contain qNaN1). Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix following special cases for MINA>.<D|S>: - if one of the inputs is zero, and the other is subnormal, normal, or infinity, the value of the former should be returned (that is, a zero). - if one of the inputs is infinity, and the other input is normal, or subnormal, the value of the latter should be returned. The previous implementation's logic for such cases was incorrect - it appears as if it implements MAXA, and not MINA instruction. A relevant example: MINA.S fd,fs,ft: If fs contains 100.0, and ft contains 0.0, fd is going to contain 0.0 (without this patch, it used to contain 100.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAXA|MINA>.<D|S> fd,fs,ft, if both inputs are infinite. The previous implementation returned always the value contained in ft in such cases. The correct behavior is specified in Mips instruction set manual and is as follows: fs ft MAXA MINA --------------------------------- inf inf inf inf inf -inf inf -inf -inf inf inf -inf -inf -inf -inf -inf A relevant example: MAXA.S fd,fs,ft: If fs contains +inf, and ft contains -inf, fd is going to contain +inf (without this patch, it used to contain -inf). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAXA|MINA>.<D|S>, if the inputs are normal fp numbers of the same absolute value, but opposite signs. A relevant example: MAXA.S fd,fs,ft: If fs contains -3.0, and ft contains +3.0, fd is going to contain +3.0 (without this patch, it used to contain -3.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the value returned by <MAX|MIN>.<D|S>, if both inputs are negative normal fp numbers. The previous logic did not take into account that if both inputs have the same sign, there should be separate treatment of the cases when both inputs are negative and when both inputs are positive. A relevant example: MAX.S fd,fs,ft: If fs contains -5.0, and ft contains -7.0, fd is going to contain -5.0 (without this patch, it used to contain -7.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Aleksandar Markovic authored
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs are zeros. The right behavior in such cases is stated in instruction reference manual and is as follows: fs ft MAX MIN MAXA MINA --------------------------------------------- 0 0 0 0 0 0 0 -0 0 -0 0 -0 -0 0 0 -0 0 -0 -0 -0 -0 -0 -0 -0 Prior to this patch, some of the above cases were yielding correct results. However, for the sake of code consistency, all such cases are rewritten in this patch. A relevant example: MAX.S fd,fs,ft: If fs contains +0.0, and ft contains -0.0, fd is going to contain +0.0 (without this patch, it used to contain -0.0). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by: -
Aleksandar Markovic authored
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications state that the returned value in such cases should be the quiet NaN contained in register fs. A relevant example: MAX.S fd,fs,ft: If fs contains qNaN1, and ft contains qNaN2, fd is going to contain qNaN1 (without this patch, it used to contain qNaN2). Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
-
Paul Burton authored
We currently have various variables & functions which are only used within a single translation unit, but which we don't declare static. This causes various sparse warnings of the form: arch/mips/kernel/mips-r2-to-r6-emul.c:49:1: warning: symbol 'mipsr2emustats' was not declared. Should it be static? arch/mips/kernel/unaligned.c:1381:11: warning: symbol 'reg16to32st' was not declared. Should it be static? arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not declared. Should it be static? Fix these & others by declaring various affected variables & functions static, avoiding the sparse warnings & redundant symbols. [ralf@linux-mips.org: Add Marcin's build fix.] Signed-off-by:Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17176/Signed-off-by:
-
Paul Burton authored
The plat_timer_setup() function is entirely unused - nothing calls it, and no platforms provide it. Perhaps our dummy implementation was once useful as an aid in forward porting platforms, but its time has long since passed so let's remove the dead code. Signed-off-by:
-
Paul Burton authored
The __invalidate_kernel_vmap_range function pointer global variable isn't used anywhere. Remove it. Signed-off-by:
-
Paul Burton authored
The fault_addr argument to fpu_emulator_cop1Handler(), fpux_emu() and cop1Emulate() has up until now been declared as: void *__user *fault_addr This is essentially a pointer in user memory which points to a pointer to void. This is not the intent for our code, which is actually operating on a pointer to a pointer to void where the pointer to void is pointing at user memory. ie. the pointer is in kernel memory & points to user memory. This mismatch produces a lot of sparse warnings that look like this: arch/mips/math-emu/cp1emu.c:1485:45: warning: incorrect type in assignment (different address spaces) expected void *[noderef] <asn:1><noident> got unsigned int [noderef] [usertype] <asn:1>*[assigned] va Fix these by modifying the declaration of the fault_addr argument to: void __user **fault_addr Signed-off-by: -
Paul Burton authored
arch/mips/mm/init.c provides our implementation of free_initrd_mem(), but doesn't include the linux/initrd.h header which declares them. This leads to a warning from sparse: arch/mips/mm/init.c:501:6: warning: symbol 'free_initrd_mem' was not declared. Should it be static? Fix this by including linux/initrd.h to get the declaration of free_initrd_mem(). Signed-off-by: -
Paul Burton authored
arch/mips/mm/mmap.c provides our implementations of the arch_mmap_rnd() & arch_randomize_brk() functions, but doesn't include the linux/elf-randomize.h header which declares them. This leads to warnings from sparse: arch/mips/mm/mmap.c:146:15: warning: symbol 'arch_mmap_rnd' was not declared. Should it be static? arch/mips/mm/mmap.c:190:15: warning: symbol 'arch_randomize_brk' was not declared. Should it be static? Fix this by including linux/elf-randomize.h to get the declarations of arch_mmap_rnd() & arch_randomize_brk(). Signed-off-by: -
Paul Burton authored
arch/mips/lib/delay.c provides our implementations of the __delay(), __ndelay() & __udelay() functions, but doesn't include the asm/delay.h header which declares them. This leads to warnings from sparse: arch/mips/lib/delay.c:26:6: warning: symbol '__delay' was not declared. Should it be static? arch/mips/lib/delay.c:50:6: warning: symbol '__udelay' was not declared. Should it be static? arch/mips/lib/delay.c:58:6: warning: symbol '__ndelay' was not declared. Should it be static? To keep checkpatch happy was well, include <linux/delay.h> rather than <asm/delay.h> directly to get the declarations of __delay(), __ndelay() & __udelay(). [ralf@linux-mips.org: Fixed to include <linux/delay.h.] Signed-off-by: -
Paul Burton authored
arch/mips/kernel/idle.c provides our implementation of the arch_cpu_idle() function, but doesn't include the linux/cpu.h header which declares it. This leads to a warning from sparse: arch/mips/kernel/idle.c:256:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static? Fix this by including linux/cpu.h to get the declaration of arch_cpu_idle(). Signed-off-by: -
Paul Burton authored
arch/mips/mm/cache.c provides our implementation of the cpu_cache_init() function, but doesn't include the asm/setup.h header which declares it. This leads to a warning from sparse: arch/mips/mm/cache.c:274:6: warning: symbol 'cpu_cache_init' was not declared. Should it be static? Fix this by including asm/setup.h to get the declaration of cpu_cache_init(). Signed-off-by: -
Paul Burton authored
arch/mips/generic/irq.c provides implementations of the get_c0_compare_int() & get_c0_perfcount_int() functions, but doesn't include the asm/time.h header which declares them. This leads to warnings from sparse: arch/mips/generic/irq.c:36:5: warning: symbol 'get_c0_perfcount_int' was not declared. Should it be static? arch/mips/generic/irq.c:52:14: warning: symbol 'get_c0_compare_int' was not declared. Should it be static? Fix this by including asm/time.h to get the declarations of get_c0_compare_int() & get_c0_perfcount_int(). Signed-off-by: -
Paul Burton authored
arch/mips/generic/init.c provides an implementation of the plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h header which declares it. This leads to a warning from sparse: arch/mips/generic/init.c:94:13: warning: symbol 'plat_fdt_relocated' was not declared. Should it be static? Fix this by including asm/bootinfo.h to get the declaration of plat_fdt_relocated(). We also #ifdef our definition of plat_fdt_relocated() such that it is only provided when CONFIG_RELOCATABLE is set, matching the header & avoiding the redundant function for non-relocatable kernels. Signed-off-by:
-
Christoph Hellwig authored
Besides eliminating lots of duplication this also allows allocations with the DMA_ATTR_NON_CONSISTENT to use the CMA allocator. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17181/Signed-off-by:
-
Harvey Hunt authored
Create a defconfig for the Omega2+ that reaches userspace and allows use of the USB port. Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17138/Signed-off-by:
-
Harvey Hunt authored
The Onion Omega2+ is an MT7688A based board that has 128MB RAM and multiple peripherals. The MT7688A is pin compatible with the MT7628A, although the former supports a 1T1R antenna whereas the MT7628A supports a 2R2T antenna. Signed-off-by:
-
Harvey Hunt authored
Enabled supported drivers, including: - USB PHY - EHCI - UART Signed-off-by: -
Harvey Hunt authored
The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB flash and multiple external peripherals. This initial DTS provides enough support to get to userland and use the USB port. Signed-off-by:
-
Harvey Hunt authored
VoCore are a manufacturer of devices such as the VoCore2. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17132/Signed-off-by:
-
Harvey Hunt authored
The MT7628A is the successor to the MT7620 and pin compatible with the MT7688A, although the latter supports only a 1T1R antenna rather than a 2T2R antenna. This commit adds support for the following features: - UART - USB PHY - EHCI - Interrupt controller - System controller - Memory controller - Reset controller Signed-off-by:
-
Manuel Lauss authored
This introduces threaded carddetect irqs for the db1200/db1300 boards. Main benefit is that the broken insertion/ejection interrupt pairs can now be better supported and debounced in software. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15287/Signed-off-by:
-
Manuel Lauss authored
No advanced MIPS features for Alchemy. This patch shaves additional 43kB off the DB1300 kernel (~0.5% size reduction). Signed-off-by:
-
Manuel Lauss authored
Prints the devboard name in cpuinfo "machine" line. Signed-off-by:
-
Manuel Lauss authored
GCC-7 complains about a boolean value being used with an arithmetic AND: arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate': arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation] fpr = (x) & ~(cop1_64bit(xcp) == 0); \ ^ arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG' DITOREG(dval, MIPSInst_RT(ir)); ^~~~~~~ arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not? fpr = (x) & ~(cop1_64bit(xcp) == 0); \ Since cop1_64bit() returns and int, just flip the LSB. Suggested-by:Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
-
Harvey Hunt authored
Add devicetree nodes for the DM9000 and the ethernet power regulator. Additionally, add a new pinctrl node for the ethernet chip's pins. Signed-off-by:
-
Harvey Hunt authored
Update the Ci20's defconfig to enable the JZ4780's GPIO driver. Signed-off-by:
-
Paul Burton authored
Move the NI 169445 board flattened image tree source into its own file which is concatenated into the final image tree source used to build the flattened image tree. Separating boards into different files will help us to avoid conflicts as boards are added. Signed-off-by:
-
Paul Burton authored
Move the Boston board flattened image tree source into its own file which is concatenated into the final image tree source used to build the flattened image tree. Separating boards into different files will help us to avoid conflicts as boards are added. Signed-off-by:
-
Paul Burton authored
In preparation for splitting arch/mips/generic/vmlinux.its.S into multiple files such that it doesn't become a conflict magnet as boards are added, allow platforms to specify a list of image tree source files which will be concatenated to form the final source used to build the image tree. Signed-off-by:
-
Petar Jovanovic authored
Define Cavium Octeon as a CPU that has support for mips32r1, mips32r2 and mips64r1. This will affect show_cpuinfo() that will now correctly expose mips32r1, mips32r2 and mips64r1 as supported ISAs. Signed-off-by:
Petar Jovanovic <petar.jovanovic@rt-rk.com> Reviewed-by:
David Daney <david.daney@cavium.com> Cc: petar.jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15749/Signed-off-by:
-
Ralf Baechle authored
Based on discussion with Linus remove the impossible to reach code rather than replacing it with a BUG(). Signed-off-by:
-
