1. 04 Feb, 2004 40 commits
    • Andrew Morton's avatar
      [PATCH] remove SIIG combo cards PCI ids from parport_pc · b5a2bdf9
      Andrew Morton authored
      From: Andrey Panin <pazke@donpac.ru>
      
      support for SIIG made serial/parallel conbo cards was moved to
      parport_serial driver some months ago, but their PCI ids still remain in
      parport_pc PCI device table.  Attached patch removes them.
      b5a2bdf9
    • Andrew Morton's avatar
      [PATCH] /proc/paritions: omit removable media · 32390780
      Andrew Morton authored
      From: Neil Brown <neilb@cse.unsw.edu.au>
      
      If programs like mount use /proc/partitions to find filesystems based on
      labels, then surely we want md devices in there as they often contain
      filesystems.
      
      If the problem is that mount-by-label takes forever with removable media
      then surely the "right" approch is the following patch, and then actually
      set this flag on the "floppy.c" device.  (It is already set for ide-floppy
      and sd devices).
      32390780
    • Andrew Morton's avatar
      [PATCH] md: Change the way the name of an md device is printed in error messages. · 62c10f9e
      Andrew Morton authored
      From: NeilBrown <neilb@cse.unsw.edu.au>
      
      Instead of using ("md%d", mdidx(mddev)), we now use ("%s", mdname(mddev))
      where mdname is the disk_name field in the associated gendisk structure.
      This allows future flexability in naming.
      62c10f9e
    • Andrew Morton's avatar
      [PATCH] md: Collect device IO statistics for MD personalities. · fe6498c9
      Andrew Morton authored
      From: NeilBrown <neilb@cse.unsw.edu.au>
      
      Update {read,write}{s,_sectors} on each request to an MD array.
      fe6498c9
    • Andrew Morton's avatar
      [PATCH] md: Fixes to make debuging output nicer. · 403c2172
      Andrew Morton authored
      From: NeilBrown <neilb@cse.unsw.edu.au>
      
      This patch thanks to Paul Clements <Paul.Clements@SteelEye.com> and only has
      effect if md is compiled with #define DEBUG 1
      403c2172
    • Andrew Morton's avatar
      [PATCH] md: Move the test in preferred_minor to where it is used. · 70bb57ee
      Andrew Morton authored
      From: NeilBrown <neilb@cse.unsw.edu.au>
      
      A RAID superblock can indicate which minor number the array should be
      assembled under.  As this is only meaningful when doing auto-start, we move
      the test for it being in the valid range to the place where auto-start
      happens.  When an array is started any other way, it doesn't matter what
      value is here.
      70bb57ee
    • Andrew Morton's avatar
      [PATCH] remove_suid() fix · 588d6141
      Andrew Morton authored
      From: viro@parcelfarce.linux.theplanet.co.uk
      
      bernhard_heibler@gmx.de has discovered that NFS is very slow when writing to
      a file which has execute permissions.  See
      
      	http://bugme.osdl.org/show_bug.cgi?id=1936
      
      This patch fixes remove_suid() to not try to modify the inode mode on every
      write to such a file.
      588d6141
    • Andrew Morton's avatar
      [PATCH] Fix deep stack usage in ncpfs · fea7cfba
      Andrew Morton authored
      From: Petr Vandrovec <vandrove@vc.cvut.cz>
      
      
      Arjan van de Ven pointed out to me there are no checks on name component
      lengths in ncpfs, so potentially 4KB regions could be allocated on stack,
      leading to the user controlled stack overflow.
      
      It was using variable-sized arrays, so this snuck past the static
      stack-usage checking tools.
      
      As NCP is limited to 255 bytes on components, we can simple limit these
      local variables to 256 bytes, and after this stack usage looks more
      acceptable.  Length checking occurs inside ncp_vol2io, during
      iocharset->codepage conversion.
      
      As a side effect support for multibyte codepages now works as it should,
      instead of returning -EINVAL whenever filename in 'codepage' encoding was
      longer than in 'iocharset'.
      
      Other part fixes typo where atime change updated ctime and not atime field.
      fea7cfba
    • Andrew Morton's avatar
      [PATCH] deprecate the raw driver · b2df6ea7
      Andrew Morton authored
      Fat chance, but we should try.
      b2df6ea7
    • Andrew Morton's avatar
      [PATCH] initialise cpu_vm_mask in init_mm · 32a0251f
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Some architectures use cpu_vm_mask to optimise TLB flushes.  On ppc64 we
      are now using a common flush infrastructure that handles both userspace and
      kernelspace (vmalloc) pages.  In order to avoid triggering this
      optimisation we need to mark the init mm as having scheduled on all cpus.
      
      Things currently work by luck (we check for the cpu only having run on the
      local cpu, and the field is initialised to 0), but it would be safer to
      initialise it CPU_MASK_ALL.
      32a0251f
    • Andrew Morton's avatar
      [PATCH] osst.c: suppress page allocation failure warnings · 7a9e704b
      Andrew Morton authored
      This driver is trying an order-9 allocation and if that fails, order 8, etc.
      Crufty, but we do expect failures, so suppress the warnings.
      7a9e704b
    • Andrew Morton's avatar
      [PATCH] remove valid_addr_bitmap · 73027d99
      Andrew Morton authored
      From: William Lee Irwin III <wli@holomorphy.com>
      
      ->valid_addr_bitmap is initialized nowhere.  Any kern_addr_valid() testing
      it returns 0 unconditionally.
      
      This patch converts kern_addr_valid() implementations using it to return 0
      as per the above and removes it from structures and zone initialization.
      Untested (not even compiletested), though a similar patch also nuking
      d_validate() was in use in -wli for several months.
      73027d99
    • Andrew Morton's avatar
      [PATCH] console: support for > 127 chars · f70ceb5a
      Andrew Morton authored
      From: Nigel Cunningham <ncunningham@users.sourceforge.net>
      
      Change the console code to support up to 256 (maybe 255?) columns.
      f70ceb5a
    • Andrew Morton's avatar
      [PATCH] fix blockdev --getro for sr, sd, ide-floppy · 2b0bcc8b
      Andrew Morton authored
      From: John McKell <mckellj@iomega.com>
      
      This 2.6.1 patch works by setting gendisk->policy to the correct value
      during initialization as the various drivers decide whether or not the disk
      is writeable.  This patch persuades "blockdev --getro ..." to correctly
      report the read-only state of a newly inserted disk.  This patch applies to
      sr.c, sd.c and ide-floppy.c.  ide-cd.c already has this functionality built
      into it.
      
      Using an Iomega Zip drive as the test case...
      
      Without the patch, I always see:
      
      $ sudo blockdev --getro /dev/sda
      0
      $
      
      That's only correct for writeable disks though.  Only when the patch
      is applied do I see a write-protected disk described correctly:
      
      $ sudo blockdev --getro /dev/sda
      1
      $
      2b0bcc8b
    • Andrew Morton's avatar
      [PATCH] ppc32: Set HZ to 1000 on ppc32 · d11e9847
      Andrew Morton authored
      From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      
      This patch has been in my tree for monthes and Paulus agrees that it should
      be made generic, so here we go, PPC32 is now proud to run at 1000HZ :)
      d11e9847
    • Andrew Morton's avatar
      [PATCH] Make naming of parititions in sysfs match /proc/partitions. · 2ae2199f
      Andrew Morton authored
      From: Neil Brown <neilb@cse.unsw.edu.au>
      
      In fs/partitions/check.c  there are two pieces of code that add a
      partition number to a block-device name:
      
        - the 'disk_name' function
        - a snprintf in add_partitions.
      
      'disk_name' inserts a 'p' before the partition number if the device
      name ends with a digit.  The snprintf in add_partitions doesn't.
      
      This patch rectifies this anomoly so that names in sysfs can be
      parsed more reliably.
      
      
      This has been extensively discussed.  It will probably break the external
      `iostat' tool.  But only for disks whose name ends in a digit, which appears
      to be only DAC960.
      2ae2199f
    • Andrew Morton's avatar
      [PATCH] missing `console_driver' with CONFIG_VT && !CONFIG_VT_CONSOLE · 057ee909
      Andrew Morton authored
      From: Jun Sun <jsun@mvista.com>
      
      'console_driver' is defined only when CONFIG_VT_CONSOLE is set.  However it
      is used by vty_init() which is outside the scope of CONFIG_VT_CONSOLE.
      057ee909
    • Andrew Morton's avatar
      [PATCH] check do_munmap() failure · 59287e5e
      Andrew Morton authored
      From: Andrea Arcangeli <andrea@suse.de>
      
      Return the proper error code
      59287e5e
    • Andrew Morton's avatar
      [PATCH] hugetlbfs cleanup · 1ea604a4
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Remove some duplicated hugetlbfs code.
      1ea604a4
    • Andrew Morton's avatar
      [PATCH] libfs mtime/ctime updates · 95912368
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Update ctime/mtime in libfs where appropriate.
      95912368
    • Andrew Morton's avatar
      [PATCH] hugetlbfs directory entry cleanup · 076cf989
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      hugetlbfs is doing strange things with directory sizes.  Al says there is no
      semantics for reported size of directories so we can remove this code.
      076cf989
    • Andrew Morton's avatar
      [PATCH] vmalloc address offset fix · e5868a37
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Paul wrote a patch to use some of the rmap infrastructure to flush TLB
      entries on ppc64.  When testing it we found a problem in vmalloc where it
      sets up the pte -> address mapping incorrectly.  We clear the top bits of
      the address but then forget to pass in the full address to
      pte_alloc_kernel.  The end result is the address in page->index is
      truncated.
      
      I fixed it in a similar way to how zeromap_pmd_range etc does it.  I'm
      guessing no one uses the rmap hooks on vmalloc pages yet, so havent seen
      this problem.
      e5868a37
    • Andrew Morton's avatar
      [PATCH] Allow software_suspend to fail · 0c2d1195
      Andrew Morton authored
      From: Pavel Machek <pavel@ucw.cz>
      
      software_suspend() can fail for quite a lot of reasons (for example not
      enough swapspace).  However current interface returned void, so you could
      not propagate error back to userland.  This fixes it.  Plus
      __read_suspend_image() is only done during init time, so we might as well
      mark it __init.
      0c2d1195
    • Andrew Morton's avatar
      [PATCH] Trivial cleanups for swsusp · 9db89cf7
      Andrew Morton authored
      From: Pavel Machek <pavel@ucw.cz>
      
      This kills unused part of struct and fixes spelling.
      
      It also fixes codingstyle a bit, converts "can not happen" panic into BUG_ON
      (fill_suspend_header() allocates no memory so panic is meaningless) and adds
      check for sizeof (struct link) [if that is not PAGE_SIZE, we have *bad*
      problem, better check early].
      9db89cf7
    • Andrew Morton's avatar
      [PATCH] swsusp does not stop DMA properly during resume · e7c215c1
      Andrew Morton authored
      From: Pavel Machek <pavel@ucw.cz>
      
      To correctly stop all DMA activity, make the boot kernel put all devices
      into suspend state before entering the resume kernel image.
      e7c215c1
    • Andrew Morton's avatar
      [PATCH] EDD: read disk80 MBR signature, export through edd module · e100952f
      Andrew Morton authored
      From: Matt Domsch <Matt_Domsch@dell.com>
      
      
      There are 4 bytes in the MSDOS master boot record, at offset 0x1b8,
      which may contain a per-system-unique signature.  By first writing a unique
      signature to each disk in the system, then rebooting, and then reading the
      MBR to get the signature for the boot disk (int13 dev 80h), userspace may
      use it to compare against disks it knows as named /dev/[hs]d[a-z], and thus
      determine which disk is the BIOS boot disk, thus where the /boot, / and
      boot loaders should be placed.
      
      This is useful in the case where the BIOS is not EDD3.0 compliant, thus
      doesn't provide the PCI bus/dev/fn and IDE/SCSI location of the boot disk,
      yet you need to know which disk is the boot disk.  It's most useful in OS
      installers.
      
      This patch retrieves the signature from the disk in setup.S, stores it in a
      space reserved in the empty_zero_page, copies it somewhere safe in setup.c,
      and exports it via /sys/firmware/edd/int13_disk80/mbr_signature in edd.c.
      Code is covered under CONFIG_EDD=[ym].
      e100952f
    • Andrew Morton's avatar
      [PATCH] use __attribute_const__ everywhere · e086c192
      Andrew Morton authored
      From: Nikita Danilov <Nikita@Namesys.COM>
      
      Replace all existing usages of __attribute__((const)) with
      __attribute_const__.
      e086c192
    • Andrew Morton's avatar
      [PATCH] kconfig/wireless: Replace enable with select · 7b6b5e72
      Andrew Morton authored
      From: Sam Ravnborg <sam@ravnborg.org>
      
      'enable' is not documented in Documentation/kbuild/kconfig-language.txt So
      remove usage in the only Kconfig file in the kernel tree where it was used.
      7b6b5e72
    • Andrew Morton's avatar
      [PATCH] Kconfig: use select statements · a26fd06e
      Andrew Morton authored
      From: Sam Ravnborg <sam@ravnborg.org>
      
      - Use keyword select in relevant warning
      
      - Include more information in warnings related to select
      
      - Move part of error-checking to a sepearate function
      
      - Added helpers used when issuing warnings - makes code simpler
      
      - Wrapped most edited lines at column 80
      a26fd06e
    • Andrew Morton's avatar
      [PATCH] add readX_relaxed() interface · 50f33737
      Andrew Morton authored
      From: jbarnes@sgi.com (Jesse Barnes)
      
      Here's the patch to add the new _relaxed variants for PIO read accesses.
      It's been ack'd by gregkh and Grant Grundler, and I think it's ready to
      go.
      
      PCI ordering rules also guarantee that PIO read responses arrive after any
      outstanding DMA writes on that bus, since for some devices the result of a
      readb() call may signal to the driver that a DMA transaction is complete.  In
      many cases, however, the driver may want to indicate that the next readb()
      call has no relation to any previous DMA writes performed by the device.  The
      driver can use the readb_relaxed() for these cases, although only some
      platforms will honor the relaxed semantics.
      50f33737
    • Andrew Morton's avatar
      [PATCH] printk_ratelimit() tweaks · 9829f0a5
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      I made a few changes, basically the burst parameter is now in units of
      messages, makes much more sense than the old net ratelimit one.
      
      I also screwed up adding a sysctl_jiffies strategy for the burst parameter.
      9829f0a5
    • Andrew Morton's avatar
      [PATCH] i387: handle copy_from_user() error · a22c1627
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
            Eugene TEO <eugeneteo@eugeneteo.net>
      a22c1627
    • Andrew Morton's avatar
      [PATCH] bitmap parsing/printing routines, version 4 · 29d82b14
      Andrew Morton authored
      From: Joe Korty <joe.korty@ccur.com>
      
      1) the version in 2.6.1 is broken, doesn't work on 64bit big endian
         machines at all.  This needed fixing.  I thought it best to fix by
         rewriting the printer/parser with an algorithm that is naturally endian &
         sizeof(long) resistant.
      
      2) I wanted all digits to print, eg, 0000ffff,00000004 not ffff,4.
      
      3) I wanted exactly NR_CPUS bits to print (or whatever the bitmap size is
         in bits, and not have what is displayed rounded up to the nearest full
         byte, as the current version did.
      
      4) The bitmap printer and parser should be part of bitmap.[ch] with syntax
         and semantics to match.  The original lib/mask.c versions did not
         recognize this commonality.
      29d82b14
    • Andrew Morton's avatar
      [PATCH] x86-64 fixes for gcc 3.5 · bfff273c
      Andrew Morton authored
      From: Andi Kleen <ak@muc.de>
      
      Fix all the x86-64 warnings with gcc 3.5 and make it compile again.
      bfff273c
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: arch/i386/kernel/traps.c · 7767803d
      Andrew Morton authored
      	++nmi_count(cpu);
      
      arch/i386/kernel/traps.c: In function `do_nmi':
      arch/i386/kernel/traps.c:552: error: invalid lvalue in increment
      
      and
      
      include/linux/netdevice.h: In function `__netif_rx_schedule':
      include/linux/netdevice.h:818: error: invalid lvalue in assignment
      include/linux/netdevice.h: In function `netif_rx_reschedule':
      include/linux/netdevice.h:842: error: invalid lvalue in assignment
      
      
      This fix will probably reintroduce unused variable warnings...
      7767803d
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: drivers/video/vgastate.c · 86a98bf5
      Andrew Morton authored
      drivers/video/vgastate.c: In function `save_vga':
      drivers/video/vgastate.c:368: error: invalid lvalue in assignment
      86a98bf5
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: drivers/video/cfbimgblt.c · 20b3efb7
      Andrew Morton authored
      drivers/video/cfbimgblt.c: In function `color_imageblit':
      drivers/video/cfbimgblt.c:140: error: invalid lvalue in assignment
      drivers/video/cfbimgblt.c: In function `slow_imageblit':
      drivers/video/cfbimgblt.c:206: error: invalid lvalue in assignment
      20b3efb7
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: drivers/video/riva/fbdev.c · 70e1ecf4
      Andrew Morton authored
      drivers/video/riva/fbdev.c: In function `rivafb_load_cursor_image':
      drivers/video/riva/fbdev.c:498: error: invalid lvalue in increment
      drivers/video/riva/fbdev.c:499: error: invalid lvalue in increment
      drivers/video/riva/fbdev.c: In function `rivafb_imageblit':
      drivers/video/riva/fbdev.c:1440: error: invalid lvalue in increment
      drivers/video/riva/fbdev.c:1449: error: invalid lvalue in increment
      70e1ecf4
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: fbcon.c · a19e6c6b
      Andrew Morton authored
      drivers/video/console/fbcon.c: In function `fbcon_set_font':
      drivers/video/console/fbcon.c:2000: error: invalid lvalue in decrement
      a19e6c6b
    • Andrew Morton's avatar
      [PATCH] gcc-3.5: gdth.c · ecf86065
      Andrew Morton authored
      drivers/scsi/gdth.c:267:10: warning: extra tokens at end of #ident directive
      ecf86065