- 11 Sep, 2017 5 commits
-
-
Arnd Bergmann authored
The new lockdep support for completions causeed the stack usage in dm-integrity to explode, in case of write_journal from 504 bytes to 1120 (using arm gcc-7.1.1): drivers/md/dm-integrity.c: In function 'write_journal': drivers/md/dm-integrity.c:827:1: error: the frame size of 1120 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The problem is that not only the size of 'struct completion' grows significantly, but we end up having multiple copies of it on the stack when we assign it from a local variable after the initial declaration. COMPLETION_INITIALIZER_ONSTACK() is the right thing to use when we want to declare and initialize a completion on the stack. However, this driver doesn't do that and instead initializes the completion just before it is used. In this case, init_completion() does the same thing more efficiently, and drops the stack usage for the function above down to 496 bytes. While the other functions in this file are not bad enough to cause a warning, they benefit equally from the change, so I do the change across the entire file. In the one place where we reuse a completion, I picked the cheaper reinit_completion() over init_completion(). Fixes: cd8084f9 ("locking/lockdep: Apply crossrelease to completions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bhumika Goyal authored
Make this structure const as it is only stored in the profile field of a blk_integrity structure. This field is of type const, so make structure as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Hyunchul Lee authored
Even though read operations fail, dm_integrity_map_continue() calls integrity_metadata() to check integrity. In this case, just complete these. This also makes it so read I/O errors do not generate integrity warnings in the kernel log. Cc: stable@vger.kernel.org Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Acked-by: Milan Broz <gmazyland@gmail.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Josef Bacik authored
512b sectors vs device's physical sectorsize was not maintained consistently and as such the support for >512b sector devices has bugs. The log metadata expects native sectorsize but 512b sectors were being stored. Also, device's sectorsize was assumed when assigning the bi_sector for blocks that were being logged. Fix this up by adding two helpers to convert between bio and dev sectors, and use these in the appropriate places to fix the problem and make it clear which units go where. Doing so allows dm-log-writes use with 4k devices. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Josef Bacik authored
The check to see if the logging kthread needs to go to sleep is wrong, it checks lc->pending_blocks, which will be non-0 if there are any blocks that are pending, whether they are ready to be logged or not. What we really want is to go to sleep until it's time to log blocks, so change this check so we do actually go to sleep in between flushes. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
- 28 Aug, 2017 17 commits
-
-
Eric Biggers authored
Constify the lookup table for device-mapper ioctls so that it is placed in .rodata. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Eric Biggers authored
The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mikulas Patocka authored
This changes DM integrity to count the number of checksum failures and report the counter in response to STATUSTYPE_INFO request (via 'dmsetup status'). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mikulas Patocka authored
Rather than write the entire dm-bufio buffer when only a subset is changed, improve dm-bufio (and dm-integrity) by only writing the subset of the buffer that changed. Update dm-integrity to make use of dm-bufio's new dm_bufio_mark_partial_buffer_dirty() interface. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Ming Lei authored
We don't need to update the original dm request partially when ending each cloned bio: just update original dm request once when the whole cloned request is finished. This still allows full support for partial completion because a new 'completed' counter accounts for incremental progress as the clone bios complete. Partial request update can be a bit expensive, so we should try to avoid it, especially because it is run in softirq context. Avoiding all the partial request updates fixes both hard lockup and soft lockups that were easily reproduced while running Laurence's test[1] on IB/SRP. BTW, after d4acf365 ("block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time"), we need to make the test more aggressive for reproducing the lockup: 1) run hammer_write.sh 32 or 64 concurrently. 2) write 8M each time [1] https://marc.info/?l=linux-block&m=150220185510245&w=2Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
DM_MAPIO_DELAY_REQUEUE causes dm-mq to requeue after a delay but causes dm-sq to requeue immediately. Make the behavior of dm-sq consistent with that of dm-mq. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
WARN_ONCE() if __multipath_map_bio() returns an unsupported return value. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
When using the block layer in single queue mode, get_request() returns ERR_PTR(-EAGAIN) if the queue is dying and the REQ_NOWAIT flag has been passed to get_request(). Avoid that the kernel reports soft lockup complaints in this case due to continuous requeuing activity. Fixes: 7083abbb ("dm mpath: avoid that path removal can trigger an infinite loop") Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
Using the same rate limiting state for different kinds of messages is wrong because this can cause a high frequency message to suppress a report of a low frequency message. Hence use a unique rate limiting state per message type. Fixes: 71a16736 ("dm: use local printk ratelimit") Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
Retry requests instead of failing them if an out-of-memory error occurs or the block driver below dm-mpath is busy. This restores the v4.12 behavior of noretry_error(), namely that -ENOMEM results in a retry. Fixes: 2a842aca ("block: introduce new block status code type") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Bart Van Assche authored
Detected by sparse. Fixes: 4e4cbee9 ("block: switch bios to blk_status_t") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Another fix, this time in common IOMMU sysfs code. In the conversion from the old iommu sysfs-code to the iommu_device_register interface, I missed to update the release path for the struct device associated with an IOMMU. It freed the 'struct device', which was a pointer before, but is now embedded in another struct. Freeing from the middle of allocated memory had all kinds of nasty side effects when an IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU until now, so this was not discovered earlier. The fix is to make the 'struct device' a pointer again" * tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix wrong freeing of iommu_device->dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fix from Greg KH: "Here is a single misc driver fix for 4.13-rc7. It resolves a reported problem in the Android binder driver due to previous patches in 4.13-rc. It's been in linux-next with no reported issues" * tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ANDROID: binder: fix proc->tsk check.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/iio fixes from Greg KH: "Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems" * tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: magnetometer: st_magn: remove ihl property for LSM303AGR iio: magnetometer: st_magn: fix status register address for LSM303AGR iio: hid-sensor-trigger: Fix the race with user space powering up sensors iio: trigger: stm32-timer: fix get trigger mode iio: imu: adis16480: Fix acceleration scale factor for adis16480 PATCH] iio: Fix some documentation warnings staging: rtl8188eu: add RNX-N150NUB support Revert "staging: fsl-mc: be consistent when checking strcmp() return" iio: adc: stm32: fix common clock rate iio: adc: ina219: Avoid underflow for sleeping time iio: trigger: stm32-timer: add enable attribute iio: trigger: stm32-timer: fix get/set down count direction iio: trigger: stm32-timer: fix write_raw return value iio: trigger: stm32-timer: fix quadrature mode get routine iio: bmp280: properly initialize device for humidity reading
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug fixes to address an incorrect ntb_mw_count reference in the NTB transport, improperly bringing down the link if SPADs are corrupted, and an out-of-order issue regarding link negotiation and data passing" * tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb: ntb: ntb_test: ensure the link is up before trying to configure the mws ntb: transport shouldn't disable link due to bogus values in SPADs ntb: use correct mw_count function in ntb_tool and ntb_transport
-
- 27 Aug, 2017 3 commits
-
-
Linus Torvalds authored
The "lock_page_killable()" function waits for exclusive access to the page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry set. That means that if it gets woken up, other waiters may have been skipped. That, in turn, means that if it sees the page being unlocked, it *must* take that lock and return success, even if a lethal signal is also pending. So instead of checking for lethal signals first, we need to check for them after we've checked the actual bit that we were waiting for. Even if that might then delay the killing of the process. This matches the order of the old "wait_on_bit_lock()" infrastructure that the page locking used to use (and is still used in a few other areas). Note that if we still return an error after having unsuccessfully tried to acquire the page lock, that is ok: that means that some other thread was able to get ahead of us and lock the page, and when that other thread then unlocks the page, the wakeup event will be repeated. So any other pending waiters will now get properly woken up. Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Cc: Nick Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jan Kara <jack@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by: Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Aug, 2017 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a tweak to the IBM Trackpoint driver that helps recognizing trackpoints on never Lenovo Carbons - a fix to the ALPS driver solving scroll issues on some Dells - yet another ACPI ID has been added to Elan I2C toucpad driver - quieted diagnostic message in soc_button_array driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365 Input: trackpoint - add new trackpoint firmware ID Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Remove needlessly alarming MSI affinity warning (this is not actually a bug fix, but the warning prompts unnecessary bug reports)" * tag 'pci-v4.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: one for an ldt_struct handling bug and a cherry-picked objtool fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use-after-free of ldt_struct objtool: Fix '-mtune=atom' decoding support in objtool 2.0
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix a timer granularity handling race+bug, which would manifest itself by spuriously increasing timeouts of some timers (from 1 jiffy to ~500 jiffies in the worst case measured) in certain nohz states" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix excessive granularity of new timers after a nohz idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Ingo Molnar: "A single fix to not allow nonsensical event groups that result in kernel warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix group {cpu,task} validation
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: reversed logic in memblock_discard() fork: fix incorrect fput of ->exe_file causing use-after-free mm/madvise.c: fix freeing of locked page with MADV_FREE dax: fix deadlock due to misaligned PMD faults mm, shmem: fix handling /sys/kernel/mm/transparent_hugepage/shmem_enabled PM/hibernate: touch NMI watchdog when creating snapshot
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull Paolo Bonzini: "Bugfixes for x86, PPC and s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce() KVM, pkeys: do not use PKRU value in vcpu->arch.guest_fpu.state KVM: x86: simplify handling of PKRU KVM: x86: block guest protection keys unless the host has them enabled KVM: PPC: Book3S HV: Add missing barriers to XIVE code and document them KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit loss KVM: PPC: Book3S HV: Use msgsync with hypervisor doorbells on POWER9 KVM: s390: sthyi: fix specification exception detection KVM: s390: sthyi: fix sthyi inline assembly
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "Fixes two obvious bugs in virtio pci" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: fix cpu affinity support virtio_blk: fix incorrect message when disk is resized
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "Just one fix, to add a barrier in the switch_mm() code to make sure the mm cpumask update is ordered vs the MMU starting to load translations. As far as we know no one's actually hit the bug, but that's just luck. Thanks to Benjamin Herrenschmidt, Nicholas Piggin" * tag 'powerpc-4.13-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Ensure cpumask update is ordered
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Two nfsd bugfixes, neither 4.13 regressions, but both potentially serious" * tag 'nfsd-4.13-2' of git://linux-nfs.org/~bfields/linux: net: sunrpc: svcsock: fix NULL-pointer exception nfsd: Limit end of page list when decoding NFSv4 WRITE
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Some bug fixes for stable for cifs" * tag 'cifs-fixes-for-4.13-rc6-and-stable' of git://git.samba.org/sfrench/cifs-2.6: cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup() cifs: Fix df output for users with quota limits
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Two fixes - one for a 4.13 regression, and the other for an older one: - Atmel NAND: since we started utilizing ONFI timings, we found that we were being too restrict at rejecting them, partly due to discrepancies in ONFI 4.0 and earlier versions. Relax the restriction to keep these platforms booting. This is a 4.13-rc1 regression. - nandsim: repeated probe/removal may not work after a failed init, because we didn't free up our debugfs files properly on the failure path. This has been around since 3.8, but it's nice to get this fixed now in a nice easy patch that can target -stable, since there's already refactoring work (that also fixes the issue) targeted for the next merge window" * tag 'for-linus-20170825' of git://git.infradead.org/linux-mtd: mtd: nand: atmel: Relax tADL_min constraint mtd: nandsim: remove debugfs entries in error path
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A small batch of fixes that should be included for the 4.13 release. This contains: - Revert of the 4k loop blocksize support. Even with a recent batch of 4 fixes, we're still not really happy with it. Rather than be stuck with an API issue, let's revert it and get it right for 4.14. - Trivial patch from Bart, adding a few flags to the blk-mq debugfs exports that were added in this release, but not to the debugfs parts. - Regression fix for bsg, fixing a potential kernel panic. From Benjamin. - Tweak for the blk throttling, improving how we account discards. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq-debugfs: Add names for recently added flags bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer Revert "loop: support 4k physical blocksize" blk-throttle: cap discard request size
-
- 25 Aug, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has some bugfixes for you: mainly Jarkko fixed up a few things in the designware driver regarding the new slave mode. But Ulf also fixed a long-standing and now agreed suspend problem. Plus, some simple stuff which nonetheless needs fixing" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Fix runtime PM for I2C slave mode i2c: designware: Remove needless pm_runtime_put_noidle() call i2c: aspeed: fixed potential null pointer dereference i2c: simtec: use release_mem_region instead of release_resource i2c: core: Make comment about I2C table requirement to reflect the code i2c: designware: Fix standard mode speed when configuring the slave mode i2c: designware: Fix oops from i2c_dw_irq_handler_slave i2c: designware: Fix system suspend
-
Christoph Hellwig authored
irq_create_affinity_masks() can return NULL on non-SMP systems, when there are not enough "free" vectors available to spread, or if memory allocation for the CPU masks fails. Only the allocation failure is of interest, and even then the system will work just fine except for non-optimally spread vectors. Thus remove the warnings. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
-