- 13 Oct, 2015 40 commits
-
-
Cristina Moraru authored
Fix 'bad line' kernel-doc warning Signed-off-by:
Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Kershner authored
With the simplified driver models we have more vmcalls that aren't supported by linux guests. Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
-
David Kershner authored
Some more churn of the drivers have made more fields unused, get rid of them. Signed-off-by:
-
David Kershner authored
Cleanup the multiple blank lines check in periodic_work.h. Signed-off-by:
-
David Kershner authored
Cleanup the checkpatch.pl check alignment should match open parenthesis, in visor_periodic_work_create(). Signed-off-by:
-
David Kershner authored
Fix the checkpatch.pl -strict check: CHECK: Unnecessary parentheses around sig_hdr.num_overflows + &(sig_hdr.num_overflows), Signed-off-by:
-
David Kershner authored
Clean up the following checkpatch.pl --strict checks: CHECK: No space is necessary after a cast + buf = (u8 *) __get_free_page(GFP_KERNEL); CHECK: No space is necessary after a cast + free_page((unsigned long) buf); CHECK: spaces preferred around that '+' (ctx:VxE) + SIG_QUEUE_OFFSET(&channel->chan_hdr, queue)+ \ ^ Signed-off-by: -
David Kershner authored
Clean up the seven checks reported by checkpatch.pl --strict. CHECK: spaces preferred around that '<<' (ctx:VxV) +#define SIGNATURE_16(A, B) ((A) | (B<<8)) ^ CHECK: spaces preferred around that '+' (ctx:VxV) +#define COVERQ(v, d) (((v)+(d)-1) / (d)) ^ CHECK: spaces preferred around that '-' (ctx:VxV) +#define COVERQ(v, d) (((v)+(d)-1) / (d)) ^ CHECK: spaces preferred around that '*' (ctx:VxV) +#define COVER(v, d) ((d)*COVERQ(v, d)) ^ CHECK: spaces preferred around that '-' (ctx:VxE) + chan->QHDRFLD.sig_base_offset = (u64)(chan->QDATAFLD)- \ ^ CHECK: spaces preferred around that '/' (ctx:VxV) + sizeof(chan->QDATAFLD)/sizeof(QDATATYPE); \ ^ CHECK: spaces preferred around that '-' (ctx:VxV) + chan->QHDRFLD.max_signals = chan->QHDRFLD.max_slots-1; \ Signed-off-by: -
David Kershner authored
Need to convert from #pragma to __packed for channel structures. Signed-off-by:
-
Tim Sell authored
Prevent faults that would occur during this sequence of activity during network stress: rmmod visornic modprobe visornic /etc/init.d/network restart The problem fixed was that the back-end IO partition was holding onto stale receive buffers after the "rmmod visornic", and erroneously completing them after a subsequent "modprobe visornic". This is fixed in this patch as follows: * Tell the back-end IO partition that we want it to employ its "incarnation mechanism" to ensure it does not complete stale receive buffers after the guest virtual device environment changes (e.g., by re-loading the driver), by setting the ULTRA_IO_DRIVER_SUPPORTS_ENHANCED_RCVBUF_CHECKING feature bit, and supplying a unique incarnation number in rcvpost.unique_num for each receive buffer posted. * When visornic loads, make sure we drain and ignore any possible-stale data in the channel before beginning network operation. Prior to this patch, faults like this would occur almost every time if you attempted to rmmod + modprobe the visornic driver and restart the network service during heavy network activity: BUG: spinlock bad magic on CPU#0, ksoftirqd/0/3 lock: 0xffff88002d8a56d8, .magic: ffff8800, .owner: <none>/-1, .owner_cpu: 2304 CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G C 4.3.0-rc3-ARCH+ #74 Signed-off-by:Tim Sell <timothy.sell@unisys.com> Signed-off-by:
-
Shraddha Barke authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Ivan Safonov authored
This patch inserts spaces preferred around that '+' found by checkpatch. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Signed-off-by:
-
Ivan Safonov authored
This patch inserts ARRAY_SIZE instead of sizeof(type array[])/sizeof(type), made arraylen variable constant and removes unnecessary default value in variable definition. Signed-off-by:
-
Shraddha Barke authored
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type. Changes made using Coccinelle- @@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) Signed-off-by:
-
Ivan Safonov authored
Unused macro read_next_pair removed from rtl8188eu driver. Signed-off-by:
-
Iban Rodriguez authored
Correct errors reported by checkpatch.pl because space prohibited before ','. Also split one line into two as it was longer than 80 characters Signed-off-by:
Iban Rodriguez <iban.rodriguez@ono.com> Signed-off-by:
-
Luis de Bethencourt authored
range->avg_qual.level is of type uint8, so it shouldn't be assigned a negative number. Assigning it 0x100 - 78, which is the equivalent to (20 + -98) dBm when IW_QUAL_DBM is set. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Fix checkpatch.pl issue: "CHECK: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt". Replace `udelay()` with a call to `usleep_range()` with a reasonable upper limit determined by the other sleeping functions present. Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace GFP_ATOMIC with GFP_KERNEL since GFP_ATOMIC is used in atomic context and only needed when functions are not allowed to sleep whereas the function is later calling msleep(). Signed-off-by:
-
Shraddha Barke authored
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type Changes made using Coccinelle- @@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) Signed-off-by:
-
Luis de Bethencourt authored
range->max_qual.noise and level are of type uint8, so they shouldn't be assigned a negative number. Assigning them 0x100 - 98, and 0x100 - 78 which are the equivalent to -98 dBm and -78 dBm, respectively, when IW_QUAL_DBM is set. Signed-off-by:
-
Luis de Bethencourt authored
ieee80211_rx_stats.noise is of type uint8, so it shouldn't be assigned a negative number. Assigning it 0x100 - 98, which is the equivalent to -98 dBm when IW_QUAL_DBM is set. Signed-off-by:
-
Shraddha Barke authored
Remove commented out printk messages since they are not needed. Also remove the unnecessary braces and blank lines Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Shraddha Barke authored
Remove commented out printk messages since they are not needed Signed-off-by:
-
Shraddha Barke authored
Remove commented printk since it is not needed Signed-off-by:
-
Ksenija Stanojevic authored
Fix error "doing DMA on the stack" by using kzalloc for buffer allocation. Issue found by smatch. Signed-off-by:
Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alison Schofield authored
Out of memory messages are unnecssary in the drivers as they are reported by memory management. Addresses checkpatch.pl: WARNING: Possible unnecessary 'out of memory' message Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Shraddha Barke authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. Signed-off-by:
-
Shraddha Barke authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. Signed-off-by:
-
Ksenija Stanojevic authored
Use memdup_user when user data is immediately copied into the allocated region. Issue found using coccinelle. Signed-off-by: Ksenija Stanojevic<ksenija.stanojevic@gmail.com> Signed-off-by: -
Shraddha Barke authored
i2c_driver does not need to set an owner because core will set it Signed-off-by:
-
Masanari Iida authored
This patch fix spelling typo found in most Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Binbin Zhou authored
The PM_EVENT_RESUME state is needed when SM750 resume, otherwise it will be failed in the second time of continuous suspend/resume. Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Reviewed-by:
Huacai Chen <chenhc@lemote.com> Reviewed-by:
Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Add space around operator '&'. Problem found using checkpatch.pl CHECK: spaces preferred around that '&' (ctx:VxV) Signed-off-by:
-
Amitoj Kaur Chawla authored
Add space around operator '<<'. Problem found using checkpatch.pl CHECK: spaces preferred around that '<<' (ctx:VxV) Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove multiple blank lines. Problem found using checkpatch.pl CHECK: Please don't use multiple blank lines Signed-off-by:
-
Amitoj Kaur Chawla authored
Rename dispState to disp_state to avoid CamelCase. Problem found using checkpatch.pl CHECK: Avoid CamelCase: <dispState> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove multiple blank lines. Problem found using checkpatch.pl CHECK: Please don't use multiple blank lines Signed-off-by:
-
Amitoj Kaur Chawla authored
Rename miniDiff to mini_diff to avoid CamelCase. Problem found using checkpatch.pl CHECK: Avoid CamelCase: <miniDiff> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove space after opening brace '{'. Problem found using checkpatch.pl CHECK: Blank lines aren't necessary after an open brace '{' Signed-off-by:
-
