- 17 Aug, 2017 8 commits
-
-
Yoshihiro Shimoda authored
Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
Signed-off-by:
-
Yoshihiro Shimoda authored
Signed-off-by:
-
Yoshihiro Shimoda authored
Signed-off-by:
-
Yoshihiro Shimoda authored
Signed-off-by:
-
Simon Horman authored
Fixes: 4dad6dcd ("arm64: dts: renesas: r8a7795: add usb2.0 host ch3 device nodes") Fixes: 1c422b4c ("arm64: dts: renesas: r8a7795: Add usb companion property in EHCI") Signed-off-by:
-
Simon Horman authored
Use newly added R-Car SATA Gen3 fallback compat string in the DT of the r8a7795 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before the fallback compat string is considered. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Laurent Pinchart authored
The DU LVDS output is on port 3 on R8A7795 but on port 2 on R8A7796. The lvds_connector label thus can't be defined in salvator-common.dtsi, common to the two SoCs. The lvds_connector label is meant for convenience to be referenced from panel device tree files, such as r8a77xx-aa104xd12-panel.dtsi or r8a77xx-aa121td01-panel.dtsi. As those files are not included in any device tree source, and the label never used elsewhere, we can simply remove it. Out-of-tree patches that include panel device tree files can then add a #define lvds_connector du_out_lvds0 before including the panel device tree file. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
- 27 Jul, 2017 31 commits
-
-
Yoshihiro Shimoda authored
This patch adds support for hsusb ch3 device nodes for R-Car H3 ES2.0. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch adds support for usb-dmac ch2 and ch3 device nodes for R-Car H3 ES2.0. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch adds support for usb2.0 host ch3 device nodes for R-Car H3 ES2.0. Signed-off-by:
-
Yoshihiro Shimoda authored
This patch adds support for usb3_phy ch3 device node for R-Car H3 ES2.0. Signed-off-by:
-
Kazuya Mizuguchi authored
This patch adds the "companion" property in the EHCI ch0, ch1 and ch2 nodes to wait for the usb companion controller startup at resume. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> [remove ch3 node and revise the commit log] Signed-off-by:
-
Geert Uytterhoeven authored
Basic support for the Renesas Draak board based on R-Car D3: - Memory, - Main crystal, - Serial console, - Watchdog. Signed-off-by:
-
Geert Uytterhoeven authored
Basic support for the R-Car D3 SoC: - PSCI, - CPU, - Cache controller, - Main clocks and controller, - Interrupt controller, - Timer, - Watchdog, - PMU, - Reset controller, - Product register, - System controller, - UART for console. Signed-off-by:
-
Geert Uytterhoeven authored
Add a configuration option for the R-Car D3 SoC. Note that r8a77995 is the first Renesas "r8a<n>" SoC using a 5 digit number in its Kconfig symbol, as r8a77990 will be a different SoC. Signed-off-by:
-
Laurent Pinchart authored
The DU dot clocks 0 and 3 are provided by the programmable VC6 clock generator. Connect them to the clock source node. Signed-off-by:
-
Laurent Pinchart authored
The VC6 is an I2C-controlled programmable clock generator, used on the board to provide a display dot clock. Add it to DT. Signed-off-by:
-
Geert Uytterhoeven authored
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of DMA specifiers. However, the second pair of corresponding DMA names was missing. Fixes: 80fab06e ("arm64: dts: r8a7796: Add all MSIOF nodes") Signed-off-by:
-
Geert Uytterhoeven authored
Add the device nodes for all MSIOF SPI controllers, incl. clocks, power domain, dma, and reset properties. Due to a hardware erratum on R-Car H3 ES1.x, using MSIOF for SPI is only supported on ES2.0 and later. Signed-off-by:
-
Laurent Pinchart authored
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3 ES2.0 are compatible save for the links to the VSPs that are described explicitly in DT, so there's no need for a new ES2-specific compatible string. Signed-off-by:
-
Vladimir Barinov authored
Enable the HDMI encoder for ULCB board and hook it up to the HDMI connector. The HDMI encoder and connector are available on both the H3 and M3-W ULCB boards. Add them to the ulcb.dtsi file. Signed-off-by:
Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by:
-
Vladimir Barinov authored
The ULCB board has one HDMI output connector. This connector is available on both the H3 and M3-W ULCB boards. Add this to the ulcb.dtsi file. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Vladimir Barinov authored
The DU0/DU1/DU2 external dot clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by:
-
Vladimir Barinov authored
The DU0/DU1/DU2/DU3 external dot clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by:
-
Vladimir Barinov authored
The DU0/DU1/DU2/DU3 external dot clocks are generated by an I2C-controlled programmable clock generator. Clock generator is available on both the H3 and M3-W ULCB boards. Add this to the ulcb.dtsi file. Signed-off-by:
-
Laurent Pinchart authored
Enable the HDMI encoder for the M3-W Salvator-X board and hook it up to the HDMI connector. Signed-off-by:
-
Laurent Pinchart authored
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU2 clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by:
-
Laurent Pinchart authored
Add the HDMI encoder to the R8A7796 DT in disabled state. Signed-off-by:
-
Laurent Pinchart authored
Add the DU device to r8a7796.dtsi in a disabled state. Signed-off-by:
-
Laurent Pinchart authored
The r8a7796 has 5 VSP instances. Signed-off-by:
-
Laurent Pinchart authored
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Signed-off-by:
-
Vladimir Barinov authored
This enables I2C4 for ULCB board Signed-off-by:
-
Vladimir Barinov authored
This enables I2C for DVFS device for ULCB board Signed-off-by:
-
Ramesh Shanmugasundaram authored
Adds the DRIF controller nodes for r8a7795. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by:
-
Ramesh Shanmugasundaram authored
Adds the DRIF controller nodes for r8a7796. Signed-off-by:
-
Geert Uytterhoeven authored
The definition of CPG_AUDIO_CLK_I is SoC-specific, not board-specific. Hence move it from the board-specific .dts files to the SoC-specific .dtsi files. Signed-off-by:
-
Sergei Shtylyov authored
Describe the IMR-LX4 devices in the R8A7796 device tree. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Sergei Shtylyov authored
Describe the IMR-LX4 devices in the R8A7795 device tree. Based on the original (and large) patch by Konstantin Kozhevnikov <Konstantin.Kozhevnikov@cogentembedded.com>. Signed-off-by:
Konstantin Kozhevnikov <Konstantin.Kozhevnikov@cogentembedded.com> Signed-off-by:
-
- 15 Jul, 2017 1 commit
-
-
Linus Torvalds authored
-
