- 02 Aug, 2011 26 commits
-
-
Mikulas Patocka authored
Move logic to find device based on major/minor number to a separate function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell). This makes the function __find_device_hash_cell more straightforward. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
Move parameter filling from find_device to __find_device_hash_cell. This patch causes ioctls using __find_device_hash_cell (DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD) to return device parameters, bringing them into line with the other ioctls. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Add corrupt_bio_byte feature to simulate corruption by overwriting a byte at a specified position with a specified value during intervals when the device is "down". Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Add 'drop_writes' option to drop writes silently while the device is 'down'. Reads are not touched. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Add the ability to specify arbitrary feature flags when creating a flakey target. This code uses the same target argument helpers that the multipath target does. Also remove the superfluous 'dm-flakey' prefixes from the error messages, as they already contain the prefix 'flakey'. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Use dm_target_offset() and support discards. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Move multipath target argument parsing code into dm-table so other targets can share it. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
If we write a full chunk in the snapshot, skip reading the origin device because the whole chunk will be overwritten anyway. This patch changes the snapshot write logic when a full chunk is written. In this case: 1. allocate the exception 2. dispatch the bio (but don't report the bio completion to device mapper) 3. write the exception record 4. report bio completed Callbacks must be done through the kcopyd thread, because callbacks must not race with each other. So we create two new functions: dm_kcopyd_prepare_callback: allocate a job structure and prepare the callback. (This function must not be called from interrupt context.) dm_kcopyd_do_callback: submit callback. (This function may be called from interrupt context.) Performance test (on snapshots with 4k chunk size): without the patch: non-direct-io sequential write (dd): 17.7MB/s direct-io sequential write (dd): 20.9MB/s non-direct-io random write (mkfs.ext2): 0.44s with the patch: non-direct-io sequential write (dd): 26.5MB/s direct-io sequential write (dd): 33.2MB/s non-direct-io random write (mkfs.ext2): 0.27s Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
Add a new flag DMF_MERGE_IS_OPTIONAL to struct mapped_device to indicate whether the device can accept bios larger than the size its merge function returns. When set, use this to send large bios to snapshots which can split them if necessary. Snapshot I/O may be significantly fragmented and this approach seems to improve peformance. Before the patch, dm_set_device_limits restricted bio size to page size if the underlying device had a merge function and the target didn't provide a merge function. After the patch, dm_set_device_limits restricts bio size to page size if the underlying device has a merge function, doesn't have DMF_MERGE_IS_OPTIONAL flag and the target doesn't provide a merge function. The snapshot target can't provide a merge function because when the merge function is called, it is impossible to determine where the bio will be remapped. Previously this led us to impose a 4k limit, which we can now remove if the snapshot store is located on a device without a merge function. Together with another patch for optimizing full chunk writes, it improves performance from 29MB/s to 40MB/s when writing to the filesystem on snapshot store. If the snapshot store is placed on a non-dm device with a merge function (such as md-raid), device mapper still limits all bios to page size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
There is no need for __table_get_device to be factored out. Also move the exports to the end of their respective functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Alasdair G Kergon authored
A dm target only needs to use include/linux dm headers. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Alasdair G Kergon authored
Detect invalid empty messages in core dm instead of requiring every target to check this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Jonathan Brassow authored
Re-order the parameters so they are handled consistently in the same order where defined, parsed and output. Only include rebuild parameters in the STATUSTYPE_TABLE output if they were supplied in the original table line. Correct the parameter count when outputting rebuild: there are two words, not one. Use case-independent checks for keywords (as in other device-mapper targets). Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Jonathan Brassow authored
Coding style cleanups. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
-
Mikulas Patocka authored
Remove a couple of unused #defines. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
The nr_pages field in struct kcopyd_job is only used temporarily in run_pages_job() to count the number of required pages. We can use a local variable instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
The offset field in struct kcopyd_job is always zero so remove it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Joe Perches authored
Use vzalloc() instead of vmalloc()+memset(). Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Kirill A. Shutemov authored
Replace list_del() followed by list_add() with list_move(). Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Akinobu Mita authored
Using __test_and_{set,clear}_bit_le() with ignoring its return value can be replaced with __{set,clear}_bit_le(). This also removes unnecessary casts. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Remove 'discards_supported' from the dm_table structure. The same information can be easily discovered from the table's target(s) in dm_table_supports_discards(). Before this fix dm_table_supports_discards() would skip checking the individual targets' 'discards_supported' flag if any one target in the table didn't set num_discard_requests > 0. Now the per-target 'discards_supported' flag is effective at insuring the final DM device advertises discard support. But, to be clear, targets that don't support discards (!num_discard_requests) will not receive discard requests. Also DMWARN if a target sets 'discards_supported' override but forgets to set 'num_discard_requests'. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Alasdair G Kergon authored
Suppress sparse warnings about cpu_to_le32() by using __le32 types for on-disk data etc. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Alasdair G Kergon authored
Destroy _minor_idr when unloading the core dm module. (Found by kmemleak.) Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
For normal kernel pages, CPU cache is synchronized by the dma layer. However, this is not done for pages allocated with vmalloc. If we do I/O to/from vmallocated pages, we must synchronize CPU cache explicitly. Prior to doing I/O on vmallocated page we must call flush_kernel_vmap_range to flush dirty cache on the virtual address. After finished read we must call invalidate_kernel_vmap_range to invalidate cache on the virtual address, so that accesses to the virtual address return newly read data and not stale data from CPU cache. This patch fixes metadata corruption on dm-snapshots on PA-RISC and possibly other architectures with caches indexed by virtual address. Cc: stable <stable@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mike Snitzer authored
Avoid dereferencing a NULL pointer if the number of feature arguments supplied is fewer than indicated. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
-
Mikulas Patocka authored
This patch makes dm-snapshot flush disk cache when writing metadata for merging snapshot. Without cache flushing the disk may reorder metadata write and other data writes and there is a possibility of data corruption in case of power fault. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
- 28 Jul, 2011 14 commits
-
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: (75 commits) md/raid10: handle further errors during fix_read_error better. md/raid10: Handle read errors during recovery better. md/raid10: simplify read error handling during recovery. md/raid10: record bad blocks due to write errors during resync/recovery. md/raid10: attempt to fix read errors during resync/check md/raid10: Handle write errors by updating badblock log. md/raid10: clear bad-block record when write succeeds. md/raid10: avoid writing to known bad blocks on known bad drives. md/raid10 record bad blocks as needed during recovery. md/raid10: avoid reading known bad blocks during resync/recovery. md/raid10 - avoid reading from known bad blocks - part 3 md/raid10: avoid reading from known bad blocks - part 2 md/raid10: avoid reading from known bad blocks - part 1 md/raid10: Split handle_read_error out from raid10d. md/raid10: simplify/reindent some loops. md/raid5: Clear bad blocks on successful write. md/raid5. Don't write to known bad block on doubtful devices. md/raid5: write errors should be recorded as bad blocks if possible. md/raid5: use bad-block log to improve handling of uncorrectable read errors. md/raid5: avoid reading from known bad blocks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits) tpm_nsc: Fix bug when loading multiple TPM drivers tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block tpm: Fix compilation warning when CONFIG_PNP is not defined TOMOYO: Update kernel-doc. tpm: Fix a typo tpm_tis: Probing function for Intel iTPM bug tpm_tis: Fix the probing for interrupts tpm_tis: Delay ACPI S3 suspend while the TPM is busy tpm_tis: Re-enable interrupts upon (S3) resume tpm: Fix display of data in pubek sysfs entry tpm_tis: Add timeouts sysfs entry tpm: Adjust interface timeouts if they are too small tpm: Use interface timeouts returned from the TPM tpm_tis: Introduce durations sysfs entry tpm: Adjust the durations if they are too small tpm: Use durations returned from TPM TOMOYO: Enable conditional ACL. TOMOYO: Allow using argv[]/envp[] of execve() as conditions. TOMOYO: Allow using executable's realpath and symlink's target as conditions. TOMOYO: Allow using owner/group etc. of file objects as conditions. ... Fix up trivial conflict in security/tomoyo/realpath.c
-
NeilBrown authored
If we find more read/write errors we should record a bad block before failing the device. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
Currently when we get a read error during recovery, we simply abort the recovery. Instead, repeat the read in page-sized blocks. On successful reads, write to the target. On read errors, record a bad block on the destination, and only if that fails do we abort the recovery. As we now retry reads we need to know where we read from. This was in bi_sector but that can be changed during a read attempt. So store the correct from_addr and to_addr in the r10_bio for later access. Signed-off-by: NeilBrown<neilb@suse.de>
-
NeilBrown authored
If a read error is detected during recovery the code currently fails the read device. This isn't really necessary. recovery_request_write will signal a write error to end_sync_write and it will record a write error on the destination device which will record a bad block there or kick it from the array. So just remove this call to do md_error. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
If we get a write error during resync/recovery don't fail the device but instead record a bad block. If that fails we can then fail the device. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
We already attempt to fix read errors found during normal IO and a 'repair' process. It is best to try to repair them at any time they are found, so move a test so that during sync and check a read error will be corrected by over-writing with good data. If both (all) devices have known bad blocks in the sync section we won't try to fix even though the bad blocks might not overlap. That should be considered later. Also if we hit a read error during recovery we don't try to fix it. It would only be possible to fix if there were at least three copies of data, which is not very common with RAID10. But it should still be considered later. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
When we get a write error (in the data area, not in metadata), update the badblock log rather than failing the whole device. As the write may well be many blocks, we trying writing each block individually and only log the ones which fail. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
If we succeed in writing to a block that was recorded as being bad, we clear the bad-block record. This requires some delayed handling as the bad-block-list update has to happen in process-context. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
Writing to known bad blocks on drives that have seen a write error is asking for trouble. So try to avoid these blocks. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
When recovering one or more devices, if all the good devices have bad blocks we should record a bad block on the device being rebuilt. If this fails, we need to abort the recovery. To ensure we don't think that we aborted later than we actually did, we need to move the check for MD_RECOVERY_INTR earlier in md_do_sync, in particular before mddev->curr_resync is updated. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
During resync/recovery limit the size of the request to avoid reading into a bad block that does not start at-or-before the current read address. Similarly if there is a bad block at this address, don't allow the current request to extend beyond the end of that bad block. Now that we don't ever read from known bad blocks, it is safe to allow devices with those blocks into the array. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
When attempting to repair a read error, don't read from devices with a known bad block. As we are only reading PAGE_SIZE blocks, we don't try to narrow down to smaller regions in the hope that only part of this page is bad - it isn't worth the effort. Signed-off-by: NeilBrown <neilb@suse.de>
-