select does not ensure that dependencies are also selected. Instead of
selecting VIRTIO_CONSOLE from S390_GUEST we should rather add this to
the defconfigs. So we update those as well.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This update adjusts /proc/cpuinfo format to meet some user level
programs expectations. It also makes the layout consistent with
x86 where CPU topology is presented as blocks of key-value pairs.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This is the s390 variant of commit 81c22041 ("bpf, x86, arm64:
Enable jit by default when not built as always-on").
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Add CPU measurement counter facility event description for IBM z15.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Embedding the hotplug_slot in zdev structure allows to
greatly simplify the hotplug handling by eliminating
the handling of the slot_list.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

While we print out various SSQD fields at initialization time, having
raw & full access to the current SSQD can help with debugging.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Make page, frame, virtual and physical address conversion macros
more expressive by avoiding redundant definitions and defining
new macros using existing ones.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Update maintainer entry for s390 PCI subsystem.
Sebastian has left IBM, Niklas takes over maintainership.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Update maintainer entry for s390 Common I/O Layer.
Sebastian has left IBM, Vineeth takes over maintainership.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This fixes several sparse warnings for fault.c:

arch/s390/mm/fault.c:336:36: warning: restricted vm_fault_t degrades to integer
arch/s390/mm/fault.c:573:23: warning: incorrect type in assignment (different base types)
arch/s390/mm/fault.c:573:23:    expected restricted vm_fault_t [usertype] fault
arch/s390/mm/fault.c:573:23:    got int
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

It turned out that fake numa support is rather useless on s390, since
there are no scenarios where there is any performance or other benefit
when used.

However it does provide maintenance cost and breaks from time to time.
Therefore remove it.

CONFIG_NUMA is still supported with a very small backend and only one
node. This way userspace applications which require NUMA interfaces
continue to work.

Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node),
since there is quite a bit of kernel code which assumes that more than
one node is possible if CONFIG_NUMA is enabled.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

aes_s390.c has several functions which allocate space for key material on
the stack and leave the used keys there. It is considered good practice
to clean these locations before the function returns.

Link: https://lkml.kernel.org/r/20200221165511.GB6928@lst.deSigned-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")

Link: https://lkml.kernel.org/r/20200221150612.GA9717@embeddedorSigned-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

There's no need for error handling, the debugfs core is smart enough to
deal with IS_ERR() internally.

This will also keep us from creating the debugfs files if the device
directory doesn't exist. Currently (because irq_ptr->debugfs_dev gets set
to NULL on error) the files would be placed into the debugfs root - without
any association to their parent device.

On teardown, use the debugfs_remove_recursive() helper to avoid keeping
track of each created file/directory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Don't rely on the numeric value of enum constants.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

In case $INSTALLKERNEL is not available, we should install the kernel
image with its version number, and save the previous one accordingly.
Also, we're adding a hint so users know that they still need to
perform one more configuration step (usually adjusting zipl config).
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Remove all usage of cdev->private->qdio_data that's buried deep in
internal code. This should only be used by the exported driver API,
which can then pass around a proper qdio_irq pointer.

Also trivially merge some initializations with their definitions.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Some parts use init_data->cdev, others use irq_ptr->cdev. In the end
it's all the same, but unnecessarily confusing.

Use a single reference instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

There will come a new CCA keyblock version 2 for protected keys
delivered back to the OS. The difference is only the amount of
available buffer space to be up to 256 bytes for version 2.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Adjust sampling buffer allocation depending on
frequency and correct comments. Investigation on the
interrupt handler revealed that almost always one interupt
services one SDB, even when running with the maximum frequency
of 100000. Very rarely there have been 2 SBD serviced per
interrupt.

Therefore reduce the number of SBD per CPU. Each SDB is one
page in size. The new formula results in
freq:4000	n_sdb:32	new:16
freq:10000	n_sdb:80	new:16
freq:20000	n_sdb:159	new:17
freq:40000	n_sdb:318	new:19
freq:50000	n_sdb:397	new:20
freq:62500	n_sdb:497	new:22
freq:83333	n_sdb:662	new:24
freq:100000	n_sdb:794	new:25
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull IPMI update from Corey Minyard:
 "Minor bug fixes for IPMI

  I know this is late; I've been travelling and, well, I've been
  distracted.

  This is just a few bug fixes and adding i2c support to the IPMB
  driver, which is something I wanted from the beginning for it"

* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
  drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
  ipmi:ssif: Handle a possible NULL pointer reference
  drivers: ipmi: Modify max length of IPMB packet
  drivers: ipmi: Support raw i2c packet in IPMB

Pull KVM fixes from Paolo Bonzini:
 "Bugfixes and improvements to selftests.

  On top of this, Mauro converted the KVM documentation to rst format,
  which was very welcome"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
  docs: virt: guest-halt-polling.txt convert to ReST
  docs: kvm: review-checklist.txt: rename to ReST
  docs: kvm: Convert timekeeping.txt to ReST format
  docs: kvm: Convert s390-diag.txt to ReST format
  docs: kvm: Convert ppc-pv.txt to ReST format
  docs: kvm: Convert nested-vmx.txt to ReST format
  docs: kvm: Convert mmu.txt to ReST format
  docs: kvm: Convert locking.txt to ReST format
  docs: kvm: Convert hypercalls.txt to ReST format
  docs: kvm: arm/psci.txt: convert to ReST
  docs: kvm: convert arm/hyp-abi.txt to ReST
  docs: kvm: Convert api.txt to ReST format
  docs: kvm: convert devices/xive.txt to ReST
  docs: kvm: convert devices/xics.txt to ReST
  docs: kvm: convert devices/vm.txt to ReST
  docs: kvm: convert devices/vfio.txt to ReST
  docs: kvm: convert devices/vcpu.txt to ReST
  docs: kvm: convert devices/s390_flic.txt to ReST
  docs: kvm: convert devices/mpic.txt to ReST
  docs: kvm: convert devices/arm-vgit.txt to ReST
  ...

Pull EDAC fixes from Borislav Petkov:
 "Two fixes for use-after-free and memory leaking in the EDAC core, by
  Robert Richter.

  Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
  unearthed issues with the lifespan of memory allocated by the EDAC
  memory controller descriptor due to misdesigned memory freeing, done
  partially by the EDAC core *and* the driver core, which is problematic
  to say the least.

  These two are minimal fixes to take care of stable - a proper rework
  is following which cleans up that mess properly"

* tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/sysfs: Remove csrow objects on errors
  EDAC/mc: Fix use-after-free and memleaks during device removal

Pull block fixes from Jens Axboe:
 "Not a lot here, which is great, basically just three small bcache
  fixes from Coly, and four NVMe fixes via Keith"

* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
  nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
  nvme/pci: move cqe check after device shutdown
  nvme: prevent warning triggered by nvme_stop_keep_alive
  nvme/tcp: fix bug on double requeue when send fails
  bcache: remove macro nr_to_fifo_front()
  bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
  bcache: ignore pending signals when creating gc and allocator thread

Pull btrfs fixes from David Sterba:
 "Two races fixed, memory leak fix, sysfs directory fixup and two new
  log messages:

   - two fixed race conditions: extent map merging and truncate vs
     fiemap

   - create the right sysfs directory with device information and move
     the individual device dirs under it

   - print messages when the tree-log is replayed at mount time or
     cannot be replayed on remount"

* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: sysfs, move device id directories to UUID/devinfo
  btrfs: sysfs, add UUID/devinfo kobject
  Btrfs: fix race between shrinking truncate and fiemap
  btrfs: log message when rw remount is attempted with unclean tree-log
  btrfs: print message when tree-log replay starts
  Btrfs: fix race between using extent maps and merging them
  btrfs: ref-verify: fix memory leaks

Pull cifs fixes from Steve French:
 "Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"

* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: make sure we do not overflow the max EA buffer size
  cifs: enable change notification for SMB2.1 dialect
  cifs: Fix mode output in debugging statements
  cifs: fix mount option display for sec=krb5i

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes (all stable fodder)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: improve explanation of a mount failure caused by a misconfigured kernel
  jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
  jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
  ext4: add cond_resched() to ext4_protect_reserved_inode
  ext4: fix checksum errors with indexed dirs
  ext4: fix support for inode sizes > 1024 bytes
  ext4: simplify checking quota limits in ext4_statfs()
  ext4: don't assume that mmp_nodename/bdevname have NUL

Pull input updates from Dmitry Torokhov:

 - a few drivers have been updated to use flexible-array syntax instead
   of GCC extension

 - ili210x touchscreen driver now supports the 2120 protocol flavor

 - a couple more of Synaptics devices have been switched over to RMI4

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyapa - replace zero-length array with flexible-array member
  Input: tca6416-keypad - replace zero-length array with flexible-array member
  Input: gpio_keys_polled - replace zero-length array with flexible-array member
  Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
  Input: synaptics - enable SMBus on ThinkPad L470
  Input: synaptics - switch T470s to RMI4 by default
  Input: gpio_keys - replace zero-length array with flexible-array member
  Input: goldfish_events - replace zero-length array with flexible-array member
  Input: psmouse - switch to using i2c_new_scanned_device()
  Input: ili210x - add ili2120 support
  Input: ili210x - fix return value of is_visible function

Pull rdma fixes from Jason Gunthorpe:
 "Not too much going on here, though there are about four fixes related
  to stuff merged during the last merge window.

  We also see the return of a syzkaller instance with access to RDMA
  devices, and a few bugs detected by that squished.

   - Fix three crashers and a memory memory leak for HFI1

   - Several bugs found by syzkaller

   - A bug fix for the recent QP counters feature on older mlx5 HW

   - Locking inversion in cxgb4

   - Unnecessary WARN_ON in siw

   - A umad crasher regression during unload, from a bug fix for
     something else

   - Bugs introduced in the merge window:
       - Missed list_del in uverbs file rework, core and mlx5 devx
       - Unexpected integer math truncation in the mlx5 VAR patches
       - Compilation bug fix for the VAR patches on 32 bit"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
  RDMA/core: Fix protection fault in get_pkey_idx_qp_list
  RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq
  RDMA/mlx5: Prevent overflow in mmap offset calculations
  IB/umad: Fix kernel crash while unloading ib_umad
  RDMA/mlx5: Fix async events cleanup flows
  RDMA/core: Add missing list deletion on freeing event queue
  RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
  RDMA/iw_cxgb4: initiate CLOSE when entering TERM
  IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported
  RDMA/core: Fix invalid memory access in spec_filter_size
  IB/rdmavt: Reset all QPs when the device is shut down
  IB/hfi1: Close window for pq and request coliding
  IB/hfi1: Acquire lock to release TID entries when user file is closed
  RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes that have come in since the merge window:

   - Fix of PCI interrupt map on arm64 fast model (SW emulator)

   - Fixlet for sound on ST platforms and a small cleanup of deprecated
     DT properties

   - A stack buffer overflow fix for moxtet

   - Fuse driver build fix for Tegra194

   - A few config updates to turn on new drivers merged this cycle"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  bus: moxtet: fix potential stack buffer overflow
  soc/tegra: fuse: Fix build with Tegra194 configuration
  ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi
  ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260
  arm64: defconfig: Enable DRM_SUN6I_DSI
  arm64: defconfig: Enable CONFIG_SUN8I_THERMAL
  ARM: sunxi: Enable CONFIG_SUN8I_THERMAL
  arm64: defconfig: Set bcm2835-dma as built-in
  ARM: configs: Cleanup old Kconfig options
  ARM: npcm: Bring back GPIOLIB support
  arm64: dts: fast models: Fix FVP PCI interrupt-map property

Pull s390 updates from Vasily Gorbik:

 - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).

 - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
   card/queue requests counter to 64-bit in crypto code.

 - Fix clang warning in get_tod_clock.

 - Fix ultravisor info length extensions handling.

 - Fix style of SPDX License Identifier in vfio-ccw.

 - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.

* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  crypto/testmgr: enable selftests for paes-s390 ciphers
  s390/time: Fix clk type in get_tod_clock
  s390/uv: Fix handling of length extensions
  s390/qdio: don't allocate *aob array with GFP_ATOMIC
  s390/qdio: simplify ACK tracking
  s390/zcrypt: fix card and queue total counter wrap
  s390/pkey: fix missing length of protected key on return
  vfio-ccw: Use the correct style for SPDX License Identifier

Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix compatible string typos in the xdpe12284 driver, and a wrong bit
  value in the ltc2978 driver"

* tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/xdpe12284) fix typo in compatible strings
  hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes all over the place:

   - Fix NUMA over-balancing between lightly loaded nodes. This is
     fallout of the big load-balancer rewrite.

   - Fix the NOHZ remote loadavg update logic, which fixes anomalies
     like reported 150 loadavg on mostly idle CPUs.

   - Fix XFS performance/scalability

   - Fix throttled groups unbound task-execution bug

   - Fix PSI procfs boundary condition

   - Fix the cpu.uclamp.{min,max} cgroup configuration write checks

   - Fix DocBook annotations

   - Fix RCU annotations

   - Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
     counts"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
  sched/core: Annotate curr pointer in rq with __rcu
  sched/psi: Fix OOB write when writing 0 bytes to PSI files
  sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
  sched/fair: Prevent unlimited runtime on throttled group
  sched/nohz: Optimize get_nohz_timer_target()
  sched/uclamp: Reject negative values in cpu_uclamp_write()
  sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
  timers/nohz: Update NOHZ load in remote tick
  sched/core: Don't skip remote tick for idle CPUs

Pull perf fixes from Ingo Molnar:
 "Fixes and HW enablement patches:

   - Tooling fixes, most of which are tooling header synchronization
     with v5.6 changes

   - Fix kprobes fallout on ARM

   - Add Intel Elkhart Lake support and extend Tremont support, these
     are relatively simple and should only affect those models

   - Fix the AMD family 17h generic event table"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
  tools headers kvm: Sync linux/kvm.h with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers x86: Sync disabled-features.h
  tools include UAPI: Sync sound/asound.h copy
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf tools: Add arm64 version of get_cpuid()
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers uapi: Sync linux/fscrypt.h with the kernel sources
  tools headers UAPI: Sync sched.h with the kernel
  perf trace: Resolve prctl's 'option' arg strings to numbers
  perf beauty prctl: Export the 'options' strarray
  tools headers UAPI: Sync prctl.h with the kernel sources
  tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
  perf maps: Move kmap::kmaps setup to maps__insert()
  perf maps: Fix map__clone() for struct kmap
  perf maps: Mark ksymbol DSOs with kernel type
  perf maps: Mark module DSOs with kernel type
  tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
  ...

The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.

Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz
Fixes: 5bc7f990 ("bus: Add support for Moxtet bus")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reported-by: sohu0106 <sohu0106@126.com>
Signed-off-by: Olof Johansson <olof@lixom.net>