- 29 Apr, 2016 40 commits
-
-
Chaehyun Lim authored
This patch renames strWIDList to wid_list to avoid camelcase. Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chaehyun Lim authored
This patch renames pstrHostIFscanAttr to scan_info to avoid camelcase. Signed-off-by:
-
Chaehyun Lim authored
This patch renames Handle_Scan to handle_scan to avoid camelcase. Signed-off-by:
-
Chaehyun Lim authored
This patch removes unnecessary block scope braces and fix indentation of the codes. Signed-off-by:
-
Chaehyun Lim authored
Handle_ScanDone function declaration is moved to front of host_interface.c file. Signed-off-by:
-
Chaehyun Lim authored
This patch changes goto label from ERRORHANDLER to unlock. unlock is a more meaningful name than ERRORHANDLER. Signed-off-by:
-
Leo Kim authored
This patch is adds a check routine when performed del_key(). We was find this situation while test the 'rmmod sdio'. That is received inform a .del_key cmd from cfg80211. If is not exist wep keys, must be ignore a wilc_remove_wep_key() function. Thus, adds a check routine that key length of wep. Signed-off-by:
Leo Kim <leo.kim@atmel.com> Signed-off-by:
-
Leo Kim authored
This patch is adds a cfg80211_disconnected() when connection is lost already. We was find this situation while test the 'rmmod sdio'. SDIO remove function are include both remove mac_close and unregister net_device. That is received one more a disconnect cmd from cfg80211. Driver was already performed disconnect. If wilc->close value was set to true, adds a call to cfg80211_disconnected(). Signed-off-by:
-
Leo Kim authored
This patch add set to null after release firmware. Signed-off-by:
-
Leo Kim authored
This patch removes unnecessary test code that mac address hardcoding setting. This test code is support to old firmware. Signed-off-by:
-
Leo Kim authored
This patch replaces a semaphore(txq_thread_started) with a completion. Struct semaphore txq_thread_started is used to signal completion of txq thread. It is better to use completion than semaphore for this case. Signed-off-by:
-
Leo Kim authored
This patch removes del_timer_sync(&periodic_rssi) which was already performed this action. Signed-off-by:
-
Leo Kim authored
This patch changes logic when happened mq_send fail. The check as a result value that mq_send fail. But, regardless of the result value then perform a semaphore up. That is an occur that semaphore locking. Add to 'else' routine and move to 'else' position a semaphore up. Signed-off-by:
-
Andreas Dilger authored
The client doesn't need to print a message for every client mount that the layout lock feature is enabled. This can be found at runtime via the "import" proc file. I also noticed that deleting OST objects logs into the debug log with D_HA status, which is enabled by default. Move this over to D_INODE so it doesn't fill the OST debug logs. Signed-off-by:
Andreas Dilger <andreas.dilger@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095 Reviewed-on: http://review.whamcloud.com/7918Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
Emoly Liu <emoly.liu@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Emoly Liu authored
Improve /sys/debug/fs/lustre/{osc,mdc}/*/import files to print the struct obd_connect_data data fields as "connect_data:" in addition to the "connect_flags:" field. Signed-off-by:James Simmons <uja.ornl@gmail.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Signed-off-by:
-
Emoly Liu authored
Some proc parameters were moved from ofd to osd module and only their symlinks were kept in ofd for interoperability/compatibility. To process this kind of config params passed by ofd, this patch is to do the following fixes: - since these parameters are not included by the static lprocfs var list, a pre-check is added for them to avoid "unknown param" error message confuses the uses. If they are matched in this check, they will be passed to the osd directly. - improve the error messages in class_process_proc_param() and class_process_proc_seq_param() a little. Signed-off-by:
-
Sebastien Buisson authored
If connection is not established yet, cli->cl_chunkbits is uninitilized so we cannot use it to check max_pages_per_rpc alignment. Signed-off-by:
Sebastien Buisson <sbuisson@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4379 Reviewed-on: http://review.whamcloud.com/8558Reviewed-by:
-
wang di authored
Add local FLDB to each MDT, so OSD/OUT can check whether FID is remote by looking up local FLDB, i.e. no need send RPC to MDT0. This is just the client part of the work. Signed-off-by:
wang di <di.wang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4076 Reviewed-on: http://review.whamcloud.com/7884Reviewed-by:
-
Alexander Boyko authored
To prevent collisions with any future flags needed in features written against this branch. Signed-off-by:
Alexander Boyko <alexander_boyko@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1757 Xyratex-bug-id: MRP-1460 Reviewed-on: http://review.whamcloud.com/8182Reviewed-by:
Vitaly Fertman <vitaly_fertman@xyratex.com> Signed-off-by:
-
John L. Hammond authored
This function declartion is not needed so remove it. Signed-off-by:
-
Oleg Drokin authored
initialize the libcfs_debug_msg_data only if needed Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1408 Reviewed-on: http://review.whamcloud.com/8338Reviewed-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by:
-
Dmitry Eremin authored
Return the correct values from ll_direct_IO_26. Signed-off-by:
Dmitry Eremin <dmitry.eremin@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4069 Reviewed-on: http://review.whamcloud.com/8080Reviewed-by:
-
Mikhail Pershin authored
Initialize request session early to make it available in high-priority handlers Signed-off-by:
Mikhail Pershin <mike.pershin@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467 Reviewed-on: http://review.whamcloud.com/7350Reviewed-by:
Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
-
Lai Siyao authored
The patch for LU-3286 removed vfsmount instances used on the server side. Since this is server side only we can remove it from the upstream client. Signed-off-by:
Lai Siyao <lai.siyao@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3286 Reviewed-on: http://review.whamcloud.com/8286Reviewed-by:
Jian Yu <jian.yu@intel.com> Reviewed-by:
-
Swapnil Pimpale authored
ll_dir_filler() now checks the returned pointer from ll_prep_md_op_data() using IS_ERR() Signed-off-by:
Swapnil Pimpale <spimpale@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4082 Reviewed-on: http://review.whamcloud.com/8073Reviewed-by:
-
Andreas Dilger authored
Add debugging for LASSERTF(it_disposition(it, DISP_ENQ_OPEN_REF) in ll_file_open(), since this is a rarely hit failure under racer, and it would be useful to get more information if this is hit again. Print the full intent disposition, as well as the status, in case Oleg's earlier comment about bailing out on any error is actually the case here. Signed-off-by:
-
Andriy Skulysh authored
Kernel commit c1c3443c assigns all allowed cpus to emulated node. End cpt initialization loop when all CPUs are assigned. Signed-off-by:
Andriy Skulysh <Andriy_Skulysh@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3992 Reviewed-on: http://review.whamcloud.com/7724Reviewed-by:
Liang Zhen <liang.zhen@intel.com> Reviewed-by:
-
Lai Siyao authored
Add OBD_CONNECT_OPEN_BY_FID for open by FID, if MDS supports this, for open by FID, it won't retry with name if object with the FID doesn't exist; while if client supports this, client won't pack name in open request if FID is known. Signed-off-by:
-
Swapnil Pimpale authored
client_obd_setup() allocates an obd_import which should be cleaned up if there is any failure afterwards in callers of client_obd_setup(). This patch fixes the bug in osc_setup(), mgc_setup(), mdc_setup() and lwp_setup(). The fix is to call obd_cleanup_client_import() before calling client_obd_cleanup() in case of an error. Signed-off-by:
-
Dmitry Eremin authored
Fix ignoring errors from ldebugfs_add_vars() function. Signed-off-by:
-
Mikhail Pershin authored
Switch OST/OFD request processing to the unified request handle. Signed-off-by:
-
Amir Shehata authored
The function class_config_parse_rec() parses the llog record and places it into a buffer to be returned. That buffer needs to end with a newline which is currently missing. Signed-off-by:
Amir Shehata <amir.shehata@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2149 Reviewed-on: http://review.whamcloud.com/4254Reviewed-by:
-
Amir Shehata authored
Remove the newline from the LCONSOLE debug macro in the function class_config_dump_handler(). Signed-off-by:
-
Andreas Dilger authored
The Lustre 2.5.4 client will print a warning about connections with 2.1.3 servers, yet they are still supposed to be interoperable. Increase the window of warning to be up to Lustre 2.5.50, since we do not intend to allow interoperability between 2.1 and 2.6 systems. This was from the time when major releases like Lustre 1.4 and 1.8 were many years apart would have no chance for interoperation. Only print this message once per client, to avoid flooding the console for connections to many servers or frequent network reconnections. Server versions should all be nearly the same in any case. Signed-off-by:
-
Prakash Surya authored
This change adds a BRW page flag, OBD_BRW_SOFT_SYNC. This flag is intended to urge a server to commit a client's unstable pages to stable storage. A client will add this flag to any BRW requests while it is in a state where it has "many" unstable pages pinned in its cache. The server, upon receiving a page with this flag set, *should* begin an async commit. The idea being that, with the proactive async commit, the client's pinned unstable pages will transition into a stable state faster than they would have otherwise. Although, the server side portion of this agreement is still unimplemented, so the OBD_BRW_SOFT_SYNC flag will currently fall on deaf ears. Signed-off-by:
Prakash Surya <surya1@llnl.gov> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2139 Reviewed-on: http://review.whamcloud.com/4375Reviewed-by:
-
Prakash Surya authored
This change adds simple accounting hooks for "unstable" pages on a per OSC basis. Now, in addition to the per filesystem tracking, each OSC will maintain a running total of its unstable pages. These counters are exported through the proc interface, and can be read using the lctl command. For example: # Read number of unstable pages contained by each OSC lctl get_param osc.*.unstable_stats The motivation for this change is in anticipation of implementing a "soft sync" functionality, urging servers to commit these unstable pages to stable storage. The per OSC accounting allows a client to limit the soft sync request to only the OSCs which have outstanding unstable pages. Signed-off-by:
-
Prakash Surya authored
This change adds a global counter to track the number of "unstable" pages held by a given client, along with per file system counters. An "unstable" page is defined as a page which has been sent to the server as part of a bulk request, but is uncommitted to stable storage. In addition to simply tracking the unstable pages, they now also count towards the maximum number of "pinned" pages on the system at any given time. Thus, a client will now be bound on the number of dirty and unstable pages it can pin in memory. Previously only dirty pages were accounted for in this limit. In addition to tracking the number of unstable pages in Lustre, the NR_UNSTABLE_NFS memory zone is also incremented and decremented for easy monitoring using the "NFS_Unstable:" field in /proc/meminfo. This field is also used internally by the kernel to limit the total amount of unstable pages on the system. The motivation for this change is twofold. First, the client must not allow itself to disconnect from an OST while still holding unstable pages. Otherwise, these unstable pages can get lost due to an OST failure, and replay is not possible due to the disconnect via unmount. Secondly, the client needs a mechanism to prevent it from allocating too much of its available RAM to unreclaimable pages pinned by the ptlrpc layer. If this case occurs, out of memory events can trigger as a side effect, which we need to avoid. The current number of unstable pages accounted for on a per file system granularity is exported by the unstable_stats proc file, contained under each file system's llite namespace. An example of retrieving this information is below: $ lctl get_param llite.*.unstable_stats Signed-off-by:
-
Sebastien Buisson authored
Fix 'error handling' issues found by Coverity version 6.6.1: Unchecked return value (CHECKED_RETURN) Calling function without checking return value. Argument cannot be negative (NEGATIVE_RETURNS) Negative value used as argument to a function expecting a positive value. Signed-off-by:
James Nunez <james.a.nunez@intel.com> Reviewed-by:
-
Niu Yawei authored
Replace LASSERT with LASSERTF in osc_completion, thus we can get more info when the LASSERT is triggered. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3843 Reviewed-on: http://review.whamcloud.com/7494Reviewed-by:
Bobi Jam <bobijam@gmail.com> Reviewed-by:
-
James Nunez authored
The printing of i_ino/i_generation in llite messages is not nearly so useful as printing the full inode FID, since i_ino is a "compressed" version of the FID and there may be duplicate values for i_ino in some cases (especially if running on a 32-bit client). All instances of printing i_ino/i_generation are replaced with the FID using ll_inode2fid(). All instances, except for one, of printing just i_ino was replaced by printing the FID. In all CERROR lines touched by the i_ino replacements, the device name or fsname was added at the beginning of the message if it did not already exist. Signed-off-by:
-
