- 21 Mar, 2019 26 commits
-
-
Dmytro Laktyushkin authored
Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Reza Amini authored
Refactor setting bit fields. Correcting the offset of MD0. Initializing the InfoPacket header fields. Defining the field offsets and masks. Signed-off-by:
Reza Amini <Reza.Amini@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Samson Tam authored
[Why] In certain cases we do link training when we don't have a backend. [How] In dc_link_set_preferred_link_settings(), store preferred link settings first and then verify that the link is DP and the link stream's backend is enabled. If either is false, then we will not do any link retraining. Signed-off-by:
Samson Tam <Samson.Tam@amd.com> Reviewed-by:
-
Wenjing Liu authored
Add these interfacese for future use setup_global_lock() lock_global() pipe_control_lock_global() Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
-
Eric Bernstein authored
Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
-
Harmanprit Tatla authored
[Why] Currently we are missing a few checks to see if HDR10 is allowed. In particular we never check for the extended colorimetry bit (whether its present or set to 1). Further we don't read in the dpcd block in DC that would provide these bits. [How] - Added in DC code to read in the block containing the extended colorimetry bit. Signed-off-by:
Harmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by:
-
David Francis authored
[Why] Somewhere in the atomic check reshuffle ABM got lost. ABM is a crtc property (copied from a connector property). It can change without a modeset, just like underscan. [How] In the skip_modeset branch of atomic check crtc updates, copy over the abm property. Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Hugo Hu authored
[Why] In HDMI plugfest, MTK report our EMP with VRR_EN bit = 0. VRR_EN bit is EMP-MD0-bit 0. Currently driver set 1 to bit 3. [How] Programming correct VRR_EN bit in EMP-MD0-bit0. Signed-off-by:
Hugo Hu <hugo.hu@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Jun Lei authored
[why] There exist displays with EDIDs > 512 bytes, existing code will cause us to ignore all extension blocks. Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
-
Wesley Chalmers authored
Audio was unmuted for HDMI only, need to do so for DP as well. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
-
Aric Cyr authored
[Why] Flickering is observed on some displays when the number of inserted BTR frames changes frequently. [How] Add in a margin of drift to prevent the inserted number of frames from jumping around too frequently. Signed-off-by:
-
Charlene Liu authored
[Description] when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N. for YCbCr420 or compressed YCbCr422, using half rate as YCbCr444. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Eric Bernstein authored
[Why] Need to set VID_N_MUL for 4:2:0 cases [How] Move setting to enc1_stream_encoder_dp_unblank and ensure it is also set for non-4:2:0 cases. Signed-off-by:
-
Yongqiang Sun authored
Move out of header to dc_helper.c, in preparation for future implementations. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] To help prevent plane state not being set to the correct default value if any new properties are added in the future. [How] Use the drm helper - which seems to be the common solution among other DRM drivers. Signed-off-by:
-
Yongqiang Sun authored
we were only checking the return value in one place, thus changing generic_reg_wait from int to void and reading the register instead of getting it from generic_reg_wait, when we need the return value. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The plane_reset callback is subclassed but hasn't been updated since the drm helper got updated to include resetting alpha related state (state->alpha and state->pixel_blend_mode). The overlay planes exposed by amdgpu_dm were therefore being rendered as invisible by default ever since supported was exposed for alpha blending properties on overlays. This caused regressions in igt@kms_plane_multiple@atomic-tiling-none and igt@kms_plane@plane-position-covered-pipe tests. [How] Reset the plane state values to their correct values as defined in the drm helper. This fixes the IGT test regression. Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Christian König authored
To aid recoverable page faults. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
We need the first paging queue to handle page faults. v2: handle any number of SDMA instances gracefully Signed-off-by:
-
Christian König authored
Now that we have re-reoute faults to the other IH ring we can enable retries again. Signed-off-by:
-
Wentao Lou authored
add amdgpu_amdkfd_pre_reset and amdgpu_amdkfd_post_reset inside amdgpu_device_reset_sriov. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] Incorrect hardcoded assumptions are made regarding luma and chroma alignment. The actual values set for the DRM framebuffer should be used when programming the address. [How] Respect the given pitch for both luma and chroma planes - it's not like we can force the alignment to anything else at this point anyway. Use the FB offset for the chroma planes directly. DRM already provides this to us so there's no need to calculate it manually. While we don't actually use the chroma surface size parameters on Raven, these should have technically been fb->width / 2 and fb->height / 2 since the chroma plane is half size of the luma plane for NV12. Leave a TODO indicating that those should be set based on the actual surface format instead since this is only correct for YUV420 formats. Signed-off-by:
-
Felix Kuehling authored
When page table are updated by the CPU, synchronize with the allocation and initialization of newly allocated page tables. Signed-off-by:
-
Philip Yang authored
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected, so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver error message "Failed to register MMU notifier" is not clear. Inform user with more descriptive message on how to fix the missing kernel config option. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
- 19 Mar, 2019 14 commits
-
-
Philip Yang authored
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by:
-
Philip Yang authored
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by:
-
Christian König authored
Otherwise we won't be able to cleanly handle page faults. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Christian König authored
Make sure that not only the entities are flush, but that we also wait for the HW to finish all processing. Signed-off-by:
-
Christian König authored
It's a bug having a dead pointer in the IDR, silently returning is the worst we can do. Signed-off-by:
-
Christian König authored
Remove the chash implementation for now since it isn't used any more. Signed-off-by:
-
Christian König authored
Further testing showed that the idea with the chash doesn't work as expected. Especially we can't predict when we can remove the entries from the hash again. So replace the chash with a ring buffer/hash mix where entries in the container age automatically based on their timestamp. v2: use ring buffer / hash mix v3: check the timeout to make sure all entries age Signed-off-by:
-
Christian König authored
Only process a maximum of 32 IVs before writing back the RPTR. This improves hw handling when we get close to an overflow in the ring buffer. Signed-off-by:
-
Christian König authored
That doesn't seem to have any negative effects. Signed-off-by:
-
Christian König authored
The doorbells should already be reserved, just enable them. Signed-off-by:
-
Christian König authored
Disable overflow and enable full drain. This makes fault handling on ring 1 much more reliable since we don't generate back pressure any more. Signed-off-by:
-
Nicholas Kazlauskas authored
The buffers should be cleared when possible but we also don't want buffer creation to fail in the rare case where the ring isn't ready during the call. This could happen during some suspend/resume sequences. Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by:
-
Nicholas Kazlauskas authored
The dumb_create API isn't intended for high performance rendering and it's more useful for userspace (ie. IGT) to have them precleared. The bonus here is that we also won't needlessly leak whatever was previously in VRAM, but it also probably wasn't sensitive if it was going through this API. Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:405:2-3: Unneeded semicolon drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:435:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: xinhui pan <xinhui.pan@amd.com> Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
