- 12 Mar, 2018 4 commits
-
-
https://github.com/t-kristo/linux-pmStephen Boyd authored
Pull TI SoC clock fixes for 4.16 from Tero Kristo: * tag 'ti-clk-fixes-4.16' of https://github.com/t-kristo/linux-pm: clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
-
Stephen Boyd authored
Merge tag 'clk-imx-fixes-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes Pull i.MX clock fixes for 4.16 from Shawn Guo: - Update i.MX5 clock driver to register UART4/5 clock only on i.MX50 and i.MX53. It fixes a kernel warning seen on i.MX53, caused by commit 59dc3d8c ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53"). * tag 'clk-imx-fixes-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
-
Stephen Boyd authored
Merge tag 'sunxi-clk-fixes-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clock fixes for 4.16 from Chen-Yu Tsai: A critical fix for the A31 sunxi-ng clock driver. The CLK_OUT clocks had definitions paired with the incorrect type of clk ops. This results in a serious oops starting with commit 946797aa ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks"), which exposed the incorrect clk ops when it added a new field to the data structures, which then nudged the underlying (compatible but incorrect) data structures out of alignment. * tag 'sunxi-clk-fixes-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
-
Jerome Brunet authored
The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d0 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d0 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Michael Turquette <mturquette@baylibre.com>
-
- 08 Mar, 2018 3 commits
-
-
Tero Kristo authored
Display driver assumes it can use clk_set_rate for the display clock via set-rate-parent mechanism, so add the flag for this to id. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com>
-
Tero Kristo authored
Display driver assumes it can use clk_set_rate for the display clock via set-rate-parent mechanism, so add the flag for this to it. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reported-by:
Jyri Sarha <jsarha@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Jyri Sarha <jsarha@ti.com>
-
Tero Kristo authored
Certain clkctrl clocks, notably the display ones, use the CLK_SET_RATE_PARENT feature extensively. Add support for this flag to the clkctrl clocks. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reported-by:
Jyri Sarha <jsarha@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Jyri Sarha <jsarha@ti.com>
-
- 22 Feb, 2018 1 commit
-
-
Fabio Estevam authored
Since commit 59dc3d8c ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53") the following warnings are seen on i.MX53: [ 2.776190] ------------[ cut here ]------------ [ 2.780948] WARNING: CPU: 0 PID: 1 at ../drivers/clk/clk.c:811 clk_core_disable+0xc4/0xe0 [ 2.789145] Modules linked in: [ 2.792236] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115 #1 [ 2.799735] Hardware name: Freescale i.MX53 (Device Tree Support) [ 2.805845] Backtrace: [ 2.808329] [<c010d1a0>] (dump_backtrace) from [<c010d460>] (show_stack+0x18/0x1c) [ 2.815919] r7:00000000 r6:60000093 r5:00000000 r4:c10798d4 [ 2.821607] [<c010d448>] (show_stack) from [<c0a353ec>] (dump_stack+0xb4/0xe8) [ 2.828854] [<c0a35338>] (dump_stack) from [<c0126144>] (__warn+0xf0/0x11c) [ 2.835837] r9:00000000 r8:0000032b r7:00000009 r6:c0d429f8 r5:00000000 r4:00000000 [ 2.843601] [<c0126054>] (__warn) from [<c0126288>] (warn_slowpath_null+0x44/0x50) [ 2.851191] r8:c1008908 r7:c0e08874 r6:c04bfac8 r5:0000032b r4:c0d429f8 [ 2.857913] [<c0126244>] (warn_slowpath_null) from [<c04bfac8>] (clk_core_disable+0xc4/0xe0) [ 2.866369] r6:dc02bb00 r5:dc02a980 r4:dc02a980 [ 2.871011] [<c04bfa04>] (clk_core_disable) from [<c04c0e54>] (clk_core_disable_lock+0x20/0x2c) [ 2.879726] r5:dc02a980 r4:80000013 [ 2.883323] [<c04c0e34>] (clk_core_disable_lock) from [<c04c0e84>] (clk_disable+0x24/0x28) [ 2.891604] r5:c0f6b3e4 r4:0000001c [ 2.895209] [<c04c0e60>] (clk_disable) from [<c0f2340c>] (imx_clk_disable_uart+0x50/0x68) [ 2.903412] [<c0f233bc>] (imx_clk_disable_uart) from [<c010277c>] (do_one_initcall+0x50/0x19c) [ 2.912043] r7:c0e08874 r6:c0f63854 r5:c0f233bc r4:ffffe000 [ 2.917726] [<c010272c>] (do_one_initcall) from [<c0f00f00>] (kernel_init_freeable+0x118/0x1d0) [ 2.926447] r9:c0f63858 r8:000000f0 r7:c0e08874 r6:c0f63854 r5:c107b500 r4:c0f75260 [ 2.934220] [<c0f00de8>] (kernel_init_freeable) from [<c0a4a5f0>] (kernel_init+0x10/0x118) [ 2.942506] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a4a5e0 [ 2.950351] r4:00000000 [ 2.952908] [<c0a4a5e0>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) [ 2.960496] Exception stack(0xdc05dfb0 to 0xdc05dff8) [ 2.965569] dfa0: 00000000 00000000 00000000 00000000 [ 2.973768] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.981965] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 2.988596] r5:c0a4a5e0 r4:00000000 [ 2.992188] ---[ end trace 346e26f708876edd ]--- [ 2.997420] ------------[ cut here ]------------ In order to fix the problem UART4/5 registration needs to happen only on i.MX50 and i.MX53. So let mx51_clocks_init() register only UART1-3 and mx50_clocks_init()/mx53_clocks_init register all the UART1-5 ports. Fixes: 59dc3d8c ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- 19 Feb, 2018 1 commit
-
-
Chen-Yu Tsai authored
When support for the A31/A31s CCU was first added, the clock ops for the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type, but the ops was set for div (M) clocks. This went unnoticed until now. This was because while they are different clocks, their data structures aligned in a way that ccu_div_ops would access the second ccu_div_internal and ccu_mux_internal structures, which were valid, if not incorrect. Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768 kHz clock signal to the WiFi chip. This was achievable by using the parent with the same clock rate and no divider. So the incorrect divider setting did not affect this usage. Commit 946797aa ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks") added a new field to the ccu_mp structure, which broke the aforementioned alignment. Now the system crashes as div_ops tries to look up a nonexistent table. Reported-by:
Philipp Rossak <embed3d@gmail.com> Tested-by:
Philipp Rossak <embed3d@gmail.com> Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com>
-
- 11 Feb, 2018 9 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:
David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
- 10 Feb, 2018 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly
-
git://github.com/dvhart/linux-pdx86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
-
Alexey Kardashevskiy authored
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
-
Masahiro Yamada authored
This function returns realloc'ed memory, so the returned pointer must be passed to free() when done. So, 'const' qualifier is odd. It is allowed to modify the expanded string. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
We already have xmalloc(), xcalloc(). Add xrealloc() as well to save tedious error handling. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Vadim Pasternak authored
It adds support for new Mellanox system types of basic classes qmb7, sn34, sn37, containing systems QMB700 (40x200GbE InfiniBand switch), SN3700 (32x200GbE and 16x400GbE Ethernet switch) and SN3410 (6x400GbE plus 48x50GbE Ethernet switch). These are the Top of the Rack systems, equipped with Mellanox COM-Express carrier board and switch board with Mellanox Quantum device, which supports InfiniBand switching with 40X200G ports and line rate of up to HDR speed or with Mellanox Spectrum-2 device, which supports Ethernet switching with 32X200G ports line rate of up to HDR speed. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
Vadim Pasternak authored
It adds support for new Mellanox system types of basic half unit size class msn201x, containing system MSN2010 (18x10GbE plus 4x4x25GbE) half and its derivatives. This is the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
Vadim Pasternak authored
It adds support for new Mellanox system types of basic class msn274x, containing system MSN2740 (32x100GbE Ethernet switch with cost reduction) and its derivatives. These are the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
- 09 Feb, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Make allocations less aggressive in x_tables, from Minchal Hocko. 2) Fix netfilter flowtable Kconfig deps, from Pablo Neira Ayuso. 3) Fix connection loss problems in rtlwifi, from Larry Finger. 4) Correct DRAM dump length for some chips in ath10k driver, from Yu Wang. 5) Fix ABORT handling in rxrpc, from David Howells. 6) Add SPDX tags to Sun networking drivers, from Shannon Nelson. 7) Some ipv6 onlink handling fixes, from David Ahern. 8) Netem packet scheduler interval calcualtion fix from Md. Islam. 9) Don't put crypto buffers on-stack in rxrpc, from David Howells. 10) Fix handling of error non-delivery status in netlink multicast delivery over multiple namespaces, from Nicolas Dichtel. 11) Missing xdp flush in tuntap driver, from Jason Wang. 12) Synchonize RDS protocol netns/module teardown with rds object management, from Sowini Varadhan. 13) Add nospec annotations to mpls, from Dan Williams. 14) Fix SKB truesize handling in TIPC, from Hoang Le. 15) Interrupt masking fixes in stammc from Niklas Cassel. 16) Don't allow ptr_ring objects to be sized outside of kmalloc's limits, from Jason Wang. 17) Don't allow SCTP chunks to be built which will have a length exceeding the chunk header's 16-bit length field, from Alexey Kodanev. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits) ibmvnic: Remove skb->protocol checks in ibmvnic_xmit bpf: fix rlimit in reuseport net selftest sctp: verify size of a new chunk in _sctp_make_chunk() s390/qeth: fix SETIP command handling s390/qeth: fix underestimated count of buffer elements ptr_ring: try vmalloc() when kmalloc() fails ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE net: stmmac: remove redundant enable of PMT irq net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4 net: stmmac: discard disabled flags in interrupt status register ibmvnic: Reset long term map ID counter tools/libbpf: handle issues with bpf ELF objects containing .eh_frames selftests/bpf: add selftest that use test_libbpf_open selftests/bpf: add test program for loading BPF ELF files tools/libbpf: improve the pr_debug statements to contain section numbers bpf: Sync kernel ABI header with tooling header for bpf_common.h net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT net: thunder: change q_len's type to handle max ring size tipc: fix skb truesize/datasize ratio control net/sched: cls_u32: fix cls_u32 on filter replace ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull more NFS client updates from Trond Myklebust: "A few bugfixes and some small sunrpc latency/performance improvements before the merge window closes: Stable fixes: - fix an incorrect calculation of the RDMA send scatter gather element limit - fix an Oops when attempting to free resources after RDMA device removal Bugfixes: - SUNRPC: Ensure we always release the TCP socket in a timely fashion when the connection is shut down. - SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context Latency/Performance: - SUNRPC: Queue latency sensitive socket tasks to the less contended xprtiod queue - SUNRPC: Make the xprtiod workqueue unbounded. - SUNRPC: Make the rpciod workqueue unbounded" * tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context fix parallelism for rpc tasks Make the xprtiod workqueue unbounded. SUNRPC: Queue latency-sensitive socket tasks to xprtiod SUNRPC: Ensure we always close the socket after a connection shuts down xprtrdma: Fix BUG after a device removal xprtrdma: Fix calculation of ri_max_send_sges
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "The highlights include: - numerous target-core-user improvements related to queue full and timeout handling. (MNC) - prevent target-core-user corruption when invalid data page is requested. (MNC) - add target-core device action configfs attributes to allow user-space to trigger events separate from existing attributes exposed to end-users. (MNC) - fix iscsi-target NULL pointer dereference 4.6+ regression in CHAP error path. (David Disseldorp) - avoid target-core backend UNMAP callbacks if range is zero. (Andrei Vagin) - fix a iscsi-target 4.14+ regression related multiple PDU logins, that was exposed due to removal of TCP prequeue support. (Florian Westphal + MNC) Also, there is a iser-target bug still being worked on for post -rc1 code to address a long standing issue resulting in persistent ib_post_send() failures, for RNICs with small max_send_sge" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits) iscsi-target: make sure to wake up sleeping login worker tcmu: Fix trailing semicolon tcmu: fix cmd user after free target: fix destroy device in target_configure_device tcmu: allow userspace to reset ring target core: add device action configfs files tcmu: fix error return code in tcmu_configure_device() target_core_user: add cmd id to broken ring message target: add SAM_STAT_BUSY sense reason tcmu: prevent corruption when invalid data page requested target: don't call an unmap callback if a range length is zero target/iscsi: avoid NULL dereference in CHAP auth error path cxgbit: call neigh_event_send() to update MAC address target: tcm_loop: Use seq_puts() in tcm_loop_show_info() target: tcm_loop: Delete an unnecessary return statement in tcm_loop_submission_work() target: tcm_loop: Delete two unnecessary variable initialisations in tcm_loop_issue_tmr() target: tcm_loop: Combine substrings for 26 messages target: tcm_loop: Improve a size determination in two functions target: tcm_loop: Delete an error message for a failed memory allocation in four functions sbp-target: Delete an error message for a failed memory allocation in three functions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Al Viro discovered some breakage with the parsing of the set_ftrace_filter as well as the removing of function probes. This fixes the code with Al's suggestions. I also added a few selftests to test the broken cases such that they wont happen again" * tag 'trace-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Add more tests for removing of function probes selftests/ftrace: Add some missing glob checks selftests/ftrace: Have reset_ftrace_filter handle multiple instances selftests/ftrace: Have reset_ftrace_filter handle modules tracing: Fix parsing of globs with a wildcard at the beginning ftrace: Remove incorrect setting of glob search field
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "There are a couple additional security fixes that are still being tested that are not in this set." * tag '4.16-minor-rc-SMB3-fixes' of git://git.samba.org/sfrench/cifs-2.6: Add missing structs and defines from recent SMB3.1.1 documentation address lock imbalance warnings in smbdirect.c cifs: silence compiler warnings showing up with gcc-8.0.0 Add some missing debug fields in server and tcon structs
-
git://github.com/bzolnier/linuxLinus Torvalds authored
Pull fbdev fix from Bartlomiej Zolnierkiewicz: "Fix building of the omapfb driver (Tomi Valkeinen)" * tag 'fbdev-v4.16-fix' of git://github.com/bzolnier/linux: video: omapfb: fix missing #includes
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář authored
Second PPC KVM update for 4.16 Seven fixes that are either trivial or that address bugs that people are actually hitting. The main ones are: - Drop spinlocks before reading guest memory - Fix a bug causing corruption of VCPU state in PR KVM with preemption enabled - Make HPT resizing work on POWER9 - Add MMIO emulation for vector loads and stores, because guests now use these instructions in memcpy and similar routines.
-
git://git.kernel.org/pub/scm/virt/kvm/kvmRadim Krčmář authored
This topic branch allocates separate MSR bitmaps for each VCPU. This is required for the IBRS enablement to choose, on a per-VM basis, whether to intercept the SPEC_CTRL and PRED_CMD MSRs; the IBRS enablement comes in through the tip tree.
-