- 24 Aug, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Fix config dependency problem with MPIC_U3_HT_IRQS via-pmu: Add compat_pmu_ioctl powerpc: Wire up fanotify_init, fanotify_mark, prlimit64 syscalls powerpc/pci: Fix checking for child bridges in PCI code. powerpc: Fix typo in uImage target powerpc: Initialise paca->kstack before early_setup_secondary powerpc: Fix bogus it_blocksize in VIO iommu code powerpc: Inline ppc64_runlatch_off powerpc: Correct smt_enabled=X boot option for > 2 threads per core powerpc: Silence xics_migrate_irqs_away() during cpu offline powerpc: Silence __cpu_up() under normal operation powerpc: Re-enable preemption before cpu_die() powerpc/pci: Drop unnecessary null test powerpc/powermac: Drop unnecessary null test powerpc/powermac: Drop unnecessary of_node_put powerpc/kdump: Stop all other CPUs before running crash handlers powerpc/mm: Fix vsid_scrample typo powerpc: Use is_32bit_task() helper to test 32 bit binary powerpc: Export memstart_addr and kernstart_addr on ppc64 powerpc: Make rwsem use "long" type ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: sep: remove driver Staging: batman-adv: Don't write in not allocated packet_buff Staging: batman-adv: Don't use net_dev after dev_put Staging: batman-adv: Create batman_if only on register event Staging: batman-adv: fix own mac address detection Staging: batman-adv: always reply batman icmp packets with primary mac Staging: batman-adv: fix batman icmp originating from secondary interface Staging: batman-adv: unify orig_hash_lock spinlock handling to avoid deadlocks Staging: batman-adv: Fix merge of linus tree Staging: spectra: removes unused functions Staging: spectra: initializa lblk variable Staging: spectra: removes unused variable Staging: spectra: remove duplicate GLOB_VERSION definition Staging: spectra: don't use locked_ioctl, fix build Staging: use new REQ_FLUSH flag, fix build breakage Staging: spectra: removes q->prepare_flush_fn, fix build breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: 68328serial: check return value of copy_*_user() instead of access_ok() synclink: add mutex_unlock() on error path rocket: add a mutex_unlock() ip2: return -EFAULT on copy_to_user errors ip2: remove unneeded NULL check serial: print early console device address in hex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: kobject_uevent: fix typo in comments firmware_class: fix typo in error path kobject: Break the kobject namespace defs into their own header
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits) ARM: imx: fix build failure concerning otg/ulpi USB: ftdi_sio: add product ID for Lenz LI-USB USB: adutux: fix misuse of return value of copy_to_user() USB: iowarrior: fix misuse of return value of copy_to_user() USB: xHCI: update ring dequeue pointer when process missed tds USB: xhci: Remove buggy assignment in next_trb() USB: ftdi_sio: Add ID for Ionics PlugComputer USB: serial: io_ti.c: don't return 0 if writing the download record failed USB: otg: twl4030: fix wrong assumption of starting state USB: gadget: Return -ENOMEM on memory allocation failure USB: gadget: fix composite kernel-doc warnings USB: ssu100: set tty_flags in ssu100_process_packet USB: ssu100: add disconnect function for ssu100 USB: serial: export symbol usb_serial_generic_disconnect USB: ssu100: rework logic for TIOCMIWAIT USB: ssu100: add register parameter to ssu100_setregister USB: ssu100: remove duplicate #defines in ssu100 USB: ssu100: refine process_packet in ssu100 USB: ssu100: add locking for port private data in ssu100 USB: r8a66597-udc: return -ENOMEM if kzalloc() fails ...
-
Andreas Schwab authored
MPIC_U3_HT_IRQS is selected both by PPC_PMAC64 and PPC_MAPLE, but depends on PPC_MAPLE, so a PPC_PMAC64-only config gets this warning: warning: (PPC_PMAC64 && PPC_PMAC && POWER4 || PPC_MAPLE && PPC64 && PPC_BOOK3S) selects MPIC_U3_HT_IRQS which has unmet direct dependencies (PPC_MAPLE) Fix that by removing the dependency on PPC_MAPLE. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andreas Schwab authored
The ioctls are actually compatible, but due to historical mistake the numbers differ between 32bit and 64bit. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Andreas Schwab authored
Signed-off-by:
-
Grant Likely authored
pci_device_to_OF_node() can return null, and list_for_each_entry will never enter the loop when dev is NULL, so it looks like this test is a typo. Reported-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Anatolij Gustschin authored
Commit e32e78c5 (powerpc: fix build with make 3.82) introduced a typo in uImage target and broke building uImage: make: *** No rule to make target `uImage'. Stop. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
Matt Evans authored
As early setup calls down to slb_initialize(), we must have kstack initialised before checking "should we add a bolted SLB entry for our kstack?" Failing to do so means stack access requires an SLB miss exception to refill an entry dynamically, if the stack isn't accessible via SLB(0) (kernel text & static data). It's not always allowable to take such a miss, and intermittent crashes will result. Primary CPUs don't have this issue; an SLB entry is not bolted for their stack anyway (as that lives within SLB(0)). This patch therefore only affects the init of secondaries. Signed-off-by:
Matt Evans <matt@ozlabs.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Anton Blanchard authored
When looking at some issues with the virtual ethernet driver I noticed that TCE allocation was following a very strange pattern: address 00e9000 length 2048 address 0409000 length 2048 <----- address 0429000 length 2048 address 0449000 length 2048 address 0469000 length 2048 address 0489000 length 2048 address 04a9000 length 2048 address 04c9000 length 2048 address 04e9000 length 2048 address 4009000 length 2048 <----- address 4029000 length 2048 Huge unexplained gaps in what should be an empty TCE table. It turns out it_blocksize, the amount we want to align the next allocation to, was c0000000fe903b20. Completely bogus. Initialise it to something reasonable in the VIO IOMMU code, and use kzalloc everywhere to protect against this when we next add a non compulsary field to iommu code and forget to initialise it. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
I'm sick of seeing ppc64_runlatch_off in our profiles, so inline it into the callers. To avoid a mess of circular includes I didn't add it as an inline function. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Nathan Fontenot authored
The 'smt_enabled=X' boot option does not handle values of X > 2. For Power 7 processors with smt modes of 0,1,2,3, and 4 this does not work. This patch allows the smt_enabled option to be set to any value limited to a max equal to the number of threads per core. Signed-off-by:
Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by:
-
Signed-off-by: Darren Hart authored
All IRQs are migrated away from a CPU that is being offlined so the following messages suggest a problem when the system is behaving as designed: IRQ 262 affinity broken off cpu 1 IRQ 17 affinity broken off cpu 0 IRQ 18 affinity broken off cpu 0 IRQ 19 affinity broken off cpu 0 IRQ 256 affinity broken off cpu 0 IRQ 261 affinity broken off cpu 0 IRQ 262 affinity broken off cpu 0 Don't print these messages when the CPU is not online. Signed-off-by:
Darren Hart <dvhltc@us.ibm.com> Acked-by:
Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Fontenot <nfont@austin.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Signed-off-by: Darren Hart authored
During CPU offline/online tests __cpu_up would flood the logs with the following message: Processor 0 found. This provides no useful information to the user as there is no context provided, and since the operation was a success (to this point) it is expected that the CPU will come back online, providing all the feedback necessary. Change the "Processor found" message to DBG() similar to other such messages in the same function. Also, add an appropriate log level for the "Processor is stuck" message. Signed-off-by:
-
Signed-off-by: Darren Hart authored
start_secondary() is called shortly after _start and also via cpu_idle()->cpu_die()->pseries_mach_cpu_die() start_secondary() expects a preempt_count() of 0. pseries_mach_cpu_die() is called via the cpu_idle() routine with preemption disabled, resulting in the following repeating message during rapid cpu offline/online tests with CONFIG_PREEMPT=y: BUG: scheduling while atomic: swapper/0/0x00000002 Modules linked in: autofs4 binfmt_misc dm_mirror dm_region_hash dm_log [last unloaded: scsi_wait_scan] Call Trace: [c00000010e7079c0] [c0000000000133ec] .show_stack+0xd8/0x218 (unreliable) [c00000010e707aa0] [c0000000006a47f0] .dump_stack+0x28/0x3c [c00000010e707b20] [c00000000006e7a4] .__schedule_bug+0x7c/0x9c [c00000010e707bb0] [c000000000699d9c] .schedule+0x104/0x800 [c00000010e707cd0] [c000000000015b24] .cpu_idle+0x1c4/0x1d8 [c00000010e707d70] [c0000000006aa1b4] .start_secondary+0x398/0x3d4 [c00000010e707e30] [c000000000008278] .start_secondary_resume+0x10/0x14 Move the cpu_die() call inside the existing preemption enabled block of cpu_idle(). This is safe as the idle task is affined to a single CPU so the debug_smp_processor_id() tests (from cpu_should_die()) won't trigger as we are in a "migration disabled" region. Signed-off-by:
-
Julia Lawall authored
list_for_each_entry binds its first argument to a non-null value, and thus any null test on the value of that argument is superfluous. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ iterator I; expression x,E,E1,E2; statement S,S1,S2; @@ I(x,...) { <... - if (x != NULL || ...) S ...> } // </smpl> Signed-off-by:
-
Julia Lawall authored
for_each_node_by_name binds its first argument to a non-null value, and thus any null test on the value of that argument is superfluous. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ iterator I; expression x,E; @@ I(x,...) { <... ( - (x != NULL) && E ...> } // </smpl> Signed-off-by:
-
Julia Lawall authored
for_each_node_by_name only exits when its first argument is NULL, and a subsequent call to of_node_put on that argument is unnecessary. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ iterator name for_each_node_by_name; expression np,E; identifier l; @@ for_each_node_by_name(np,...) { ... when != break; when != goto l; } ... when != np = E - of_node_put(np); // </smpl> Signed-off-by:
-
Anton Blanchard authored
During kdump we run the crash handlers first then stop all other CPUs. We really want to stop all CPUs as close to the fail as possible and also have a very controlled environment for running the crash handlers, so it makes sense to reverse the order. Signed-off-by:
-
Anton Blanchard authored
The code is wrapped in an #if 0, but it's wrong so we may as well fix it. Signed-off-by:
-
Denis Kirjanov authored
Use is_32bit_task() helper to test 32 bit binary. Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
Sonny Rao authored
Some modules (like eHCA) want to map all of kernel memory, for this to work with a relocated kernel, we need to export kernstart_addr so modules can use PHYSICAL_START and memstart_addr so they could use MEMORY_START. Note that the 32bit code already exports these symbols. Signed-off-By:
Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
This makes the 64-bit kernel use 64-bit signed integers for the counter (effectively supporting 32-bit of active count in the semaphore), thus avoiding things like overflow of the mmap_sem if you use a really crazy number of threads Note: Ideally the type in the structure should be atomic_long_t rather than "long". However, there's some nasty issues with that. It needs to be initialized statically -and- lib/rwsem.c does things like sem->count = RWSEM_UNLOCKED_VALUE; Now, if you mix in the fact that atomic_* types are actually structures with one member and note typedefs of a scalar, it makes its really nasty. So I stuck to what we did before using a long and casts for now. Signed-off-by: -
Benjamin Herrenschmidt authored
-
Uwe Kleine-König authored
The build failure was introduced by 13dd0c97 (USB: otg/ulpi: extend the generic ulpi driver.) Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Galen Seitz authored
Add ftdi product ID for Lenz LI-USB, a model train interface. This was NOT tested against 2.6.35, but a similar patch was tested with the CentOS 2.6.18-194.11.1.el5 kernel. It wasn't clear to me what ordering is being used in ftdi_sio.c, so I inserted the ID after another model train entry(SPROG_II). Signed-off-by:
Galen Seitz <galens@seitzassoc.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Kulikov Vasiliy authored
copy_to_user() returns number of not copied bytes, not error code. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
copy_to_user() returns number of not copied bytes, not error code. Signed-off-by:
-
Andiry Xu authored
This patch fixes a isoc transfer bug reported by Sander Eikelenboom. When ep->skip is set, endpoint ring dequeue pointer should be updated when processed every missed td. Although ring dequeue pointer will also be updated when ep->skip is clear, leave it intact during missed tds processing may cause two issues: 1). If the very next valid transfer following missed tds is a short transfer, its actual_length will be miscalculated; 2). If there are too many missed tds during transfer, new inserted tds may found the transfer ring full and urb enqueue fails. Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Tested-by:
Andiry Xu <andiry.xu@amd.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
John Youn authored
The code to increment the TRB pointer has a slight ambiguity that could lead to a bug on different compilers. The ANSI C specification does not specify the precedence of the assignment operator over the postfix operator. gcc 4.4 produced the correct code (increment the pointer and assign the value), but a MIPS compiler that one of John's clients used assigned the old (unincremented) value. Remove the unnecessary assignment to make all compilers produce the correct assembly. Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
-
Martin Michlmayr authored
Add the ID for the Ionics PlugComputer (<http://ionicsplug.com/>). Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Roel Kluin authored
If the write download record failed we shouldn't return 0. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Felipe Balbi authored
The reset state of twl4030-usb is not sleeping, it starts up awaken and we need to disable it if we have booted with a disconnected cable to avoid over consumption on the default state. To avoid problems later, we read the current state of the transceiver from the PHY_PWR_CTRL register. The bootloader can, anyways, put the device to sleep before us. Tested on a custom OMAP board. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Julia Lawall authored
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by:
-
Randy Dunlap authored
Warning(include/linux/usb/composite.h:284): No description found for parameter 'disconnect' Warning(drivers/usb/gadget/composite.c:744): No description found for parameter 'c' Warning(drivers/usb/gadget/composite.c:744): Excess function parameter 'cdev' description in 'usb_string_ids_n' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Bill Pemberton authored
flag was never set in ssu100_process_packet. Add logic to set it before calling tty_insert_flip_* Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Signed-off-by:
-
Bill Pemberton authored
Add a disconnect function to the functions of this device. The disconnect is a call to usb_serial_generic_disconnect() so it requires that symbol to be exported from generic.c. Signed-off-by:
-
Bill Pemberton authored
This is needed by the ssu100 driver to use this function. Signed-off-by:
-
