- 31 Jul, 2012 23 commits
-
-
Alex Elder authored
There was a dout() call in rbd_do_request() that was reporting the reporting the offset as the length and vice versa. While fixing that I did a quick scan of other dout() calls and fixed a couple of other minor things. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
This just replaces a while loop with list_for_each_entry_safe() in __rbd_remove_all_snaps(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
In commit c666601a there was inadvertently added an extra initialization of rbd_dev->header_rwsem. This gets rid of the duplicate. Reported-by: Guangliang Zhao <gzhao@suse.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
The snap_seq field in an rbd_image_header structure held the value from the rbd image header when it was last refreshed. We now maintain this value in the snapc->seq field. So get rid of the other one. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
In rbd_header_add_snap() there is code to set snapc->seq to the just-added snapshot id. This is the only remnant left of the use of that field for recording which snapshot an rbd_dev was associated with. That functionality is no longer supported, so get rid of that final bit of code. Doing so means we never actually set snapc->seq any more. On the server, the snapshot context's sequence value represents the highest snapshot id ever issued for a particular rbd image. So we'll make it have that meaning here as well. To do so, set this value whenever the rbd header is (re-)read. That way it will always be consistent with the rest of the snapshot context we maintain. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
In rbd_header_set_snap(), there is logic to make the snap context's seq field get set to a particular snapshot id, or 0 if there is no snapshot for the rbd image. This seems to be an artifact of how the current snapshot id for an rbd_dev was recorded before the rbd_dev->snap_id field began to be used for that purpose. There's no need to update the value of snapc->seq here any more, so stop doing it. Tidy up a few local variables in that function while we're at it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
In what appears to be an artifact of a different way of encoding whether an rbd image maps a snapshot, __rbd_refresh_header() has code that arranges to update the seq value in an rbd image's snapshot context to point to the first entry in its snapshot array if that's where it was pointing initially. We now use rbd_dev->snap_id to record the snapshot id--using the special value CEPH_NOSNAP to indicate the rbd_dev is not mapping a snapshot at all. There is therefore no need to check for this case, nor to update the seq value, in __rbd_refresh_header(). Just preserve the seq value that rbd_read_header() provides (which, at the moment, is nothing). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Josh Durgin authored
Previously the original header version was sent. Now, we update it when the header changes. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Josh Durgin authored
This prevents a race between requests with a given snap context and header updates that free it. The osd client was already expecting the snap context to be reference counted, since it get()s it in ceph_osdc_build_request and put()s it when the request completes. Also remove the second down_read()/up_read() on header_rwsem in rbd_do_request, which wasn't actually preventing this race or protecting any other data. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Josh Durgin authored
The image may have been resized. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Josh Durgin authored
If an image was mapped to a snapshot, the size of the head version would be shown. Protect capacity with header_rwsem, since it may change. Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Josh Durgin authored
Snapshots cannot be resized, and the new capacity of head should not be reflected by the snapshot. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Josh Durgin authored
When a snapshot is deleted, the OSD will return ENOENT when reading from it. This is normally interpreted as a hole by rbd, which will return zeroes. To minimize the time in which this can happen, stop requests early when we are notified that our snapshot no longer exists. [elder@inktank.com: updated __rbd_init_snaps_header() logic] Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Jiaju Zhang authored
This is a trivial fix for the debug output, as it is inconsistent with the function name so may confuse people when debugging. [elder@inktank.com: switched to use __func__] Signed-off-by: Jiaju Zhang <jjzhang@suse.de> Reviewed-by: Alex Elder <elder@inktank.com>
-
Alan Cox authored
We re-run the loop but we don't re-set the attrs pointer back to NULL. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Sage Weil authored
We exponentially back off when we encounter connection errors. If several errors accumulate, we will eventually wait ages before even trying to reconnect. Fix this by resetting the backoff counter after a successful negotiation/ connection with the remote node. Fixes ceph issue #2802. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Sage Weil authored
Take the con mutex while we are initiating a ceph open. This is necessary because the may have previously been in use and then closed, which could result in a racing workqueue running con_work(). Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
-
Sage Weil authored
When we detect a mds session reset, close the old ceph_connection before reopening it. This ensures we clean up the old socket properly and keep the ceph_connection state correct. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Sage Weil authored
Previously, we were opportunistically initializing the bio_iter if it appeared to be uninitialized in the middle of the read path. The problem is that a sequence like: - start reading message - initialize bio_iter - read half a message - messenger fault, reconnect - restart reading message - ** bio_iter now non-NULL, not reinitialized ** - read past end of bio, crash Instead, initialize the bio_iter unconditionally when we allocate/claim the message for read. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Sage Weil authored
The linger op registration (i.e., watch) modifies the object state. As such, the OSD will reply with success if it has already applied without doing the associated side-effects (setting up the watch session state). If we lose the ACK and resubmit, we will see success but the watch will not be correctly registered and we won't get notifies. To fix this, always resubmit the linger op with a new tid. We accomplish this by re-registering as a linger (i.e., 'registered') if we are not yet registered. Then the second loop will treat this just like a normal case of re-registering. This mirrors a similar fix on the userland ceph.git, commit 5dd68b95, and ceph bug #2796. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Sage Weil authored
Hold the mutex while twiddling all of the state bits to avoid possible races. While we're here, make not of why we cannot close the socket directly. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Sage Weil authored
We need to set error_msg to something useful before calling ceph_fault(); do so here for try_{read,write}(). This is more informative than libceph: osd0 192.168.106.220:6801 (null) Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Sage Weil authored
The server side recently added support for tuning some magic crush variables. Decode these variables if they are present, or use the default values if they are not present. Corresponds to ceph.git commit 89af369c25f274fe62ef730e5e8aad0c54f1e5a5. Signed-off-by: caleb miles <caleb.miles@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
- 30 Jul, 2012 17 commits
-
-
Sage Weil authored
This is simply cleanup that will keep things more closely synced with the userland code. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
-
Alex Elder authored
Several functions include a num_reply parameter, but it is never used. Just get rid of it everywhere--it seems to be something that never got fully implemented. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Use the name "ceph_opts" consistently (rather than just "opt") for pointers to a ceph_options structure. Change the few spots that don't use "rbd_opts" for a rbd_options pointer to match the rest. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Rename variables named "obj" which represent object names so they're consistently named "object_name". Rename the "cls" and "method" parameters in rbd_req_sync_exec() to be "class_name" and "method_name", and make similar changes to the names of local variables in that function representing the lengths of those names. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
An rbd image is not a single object, but a logical construct made up of an aggregation of objects. Rename some fields in struct rbd_dev, in hopes of reinforcing this. obj --> image_name obj_len --> image_name_len obj_md_name --> header_name Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Most variables that represent a struct rbd_device are named "rbd_dev", but in some cases "dev" is used instead. Change all the "dev" references so they use "rbd_dev" consistently, to make it clear from the name that we're working with an RBD device (as opposed to, for example, a struct device). Similarly, change the name of the "dev" field in struct rbd_notify_info to be "rbd_dev". Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is no need to impose a small limit the length of the snapshot name recorded for an rbd image in a struct rbd_dev. Remove the limitation by allocating space for the snapshot name dynamically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is no need to impose a small limit the length of the rbd image name recorded in a struct rbd_dev. Remove the limitation by allocating space for the image name dynamically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is no need to impose a small limit the length of the header name recorded for an rbd image in a struct rbd_dev. Remove the limitation by allocating space for the header name dynamically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is no need to impose a small limit the length of the object prefix recorded for an rbd image in a struct rbd_image_header. Remove the limitation by allocating space for the object prefix dynamically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is no need to impose a small limit the length of the pool name recorded for an rbd image in a struct rbd_device. Remove the limitation by allocating space for the pool name ynamically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that provides the id for the pool the rbd image is assocatied with. This is in addition to the pool name already provided. Rename the "poolid" field in struct rbd_device to be "pool_id". Update the documentation to reflect the addition of this new entry. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Each rbd image has a name that forms the basis of all data objects backing the device. Old (format 1) images refer to this name as the "block name," while new (format 2) images use the term "object prefix" for this. Change the field name in the in-core rbd image header structure to reflect the more modern usage. We intentionally keep the the name "block_name" in the on-disk definition for format 1 image headers. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
Define a new function dup_token(), to be used during argument parsing for making dynamically-allocated copies of tokens being parsed. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
This adds a new utility routine which will return a dynamically- allocated buffer containing a string that has been decoded from ceph over-the-wire format. It also returns the length of the string if the address of a size variable is supplied to receive it. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
-
Alex Elder authored
In rbd_req_sync_notify_ack(), a local variable was needlessly being used to hold a null pointer. Just pass NULL instead. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-
Alex Elder authored
There is a BUG_ON() call that doesn't account for the single byte structure version at the start of an encoded filepath in ceph_encode_filepath(). Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yehuda Sadeh <yehuda@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
-