Merge tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo:
 - Correct the typo in fsl-ls1088a-rdb board name.
 - A series from Horia Geantă to consolidate aliases node and enable
   crypto support for ls208xa and ls1088a.
 - Enable USB host support for ls1012a.
 - Enable cpuidle support for ls1088a and ls208xa.

* tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"
  arm64: dts: ls208xa: add cpu idle support
  arm64: dts: ls1088a: add cpu idle support
  arm64: dts: freescale: ls1088a: add crypto node
  arm64: dts: freescale: ls208xa: add crypto node
  arm64: dts: freescale: ls208xa: share aliases node
  arm64: dts: ls1012a: add USB host controller nodes

Pull "Broadcom devicetree-arm64 changes for 4.14" from Florian Fainelli:

This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.14, please pull the following:

- Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent
  with what was done for stingray and to future proof the addition of new board
  DTS files

- Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC
  DTS include file

- Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS
  include files

- Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes
  to the Stingray DTS include files

- Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS
  files

* tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: Add SBA-RAID DT nodes for Stingray SoC
  arm64: dts: Add FlexRM DT nodes for Stingray
  arm64: dts: Add SATA DT nodes for Stingray SoC
  arm64: dts: Add DT node to enable BGMAC driver on Stingray
  arm64: dts: Add sp804 DT nodes for Stingray SoC
  arm64: dts: Add MDIO multiplexer DT node for Stingray
  arm64: dts: Enable stats for CCN-502 interconnect on Stingray
  arm64: dts: move ns2 into northstar2 directory

Pull "arm: mediatek: dts64 updates for v4.14" from Matthias Brugger:

- add SoC mt7622 and its reference board
- cleanup of dts bindings
- mt6797: add watchdog and delete unused clock
- add support for SoC mt2701 and it's eval board

* tag 'v4.13-next-dts64' of https://github.com/mbgg/linux-mediatek:
  arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile
  dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform
  arm64: dts: mediatek: Delete unused dummy clock for MT6797
  arm64: dts: mediatek: add watchdog to MT6797
  ARM: mediatek: dts: Add MT6797 binding
  ARM: mediatek: dts: Cleanup bindings documentation
  arm64: dts: mt7622: add dts file for MT7622 reference board variant 1
  arm64: dts: mt7622: add basic nodes to the mt7622.dtsi file

This adds basic chip support for Mediatek 2712
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This adds dt-binding documentation for Mediatek MT2712.
Only include very basic items: cpu, gic and uart.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

After adding the clock subsystem to the SOC, the dummy
clock clk32k is not longer needed. Delete it.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds the watchdog driver to the MT6797 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds the binding for the MT6797 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Pull "Amlogic 64-bit DT updates for v4.14" from Kevin Hilman:

- add GPIO line names to a few boards
- MMC regulator settle time updates
- misc cleanups/fixups

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gx: use stable UART bindings with correct gate clock
  ARM64: dts: meson-gxbb-nanopi-k2: Add GPIO lines names
  ARM64: dts: meson-gxl-khadas-vim: Add GPIO lines names
  ARM64: dts: meson-gxbb: p20x: add card regulator settle times
  dt-bindings: amlogic: add unstable statement
  ARM64: dts: meson-gx: Add SoC info register
  ARM64: dts: meson-gx: consistently use the GIC_SPI and IRQ type macros

Merge tag 'qcom-arm64-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Pull "Qualcomm ARM64 Updates for v4.14" from Andy Gross:

* Force USB host mode on APQ8016
* Update coresight nodes on MSM8916
* Add MSM8996 support for USB, PCIE phy, RPM/GLink, and modem SMP2P
* Add db820c PM8994 regulator node
* Add PMI8994 gpios
* Add assorted MSM8916 nodes including GPU, IOMMU, Venus, and CEC clock.

* tag 'qcom-arm64-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: qcom: msm8916: Add IOMMU support
  arm64: dts: qcom: msm8916: Add Venus video codec support
  arm64: dts: qcom: msm8916: Add gpu support
  arm64: dts: qcom: msm8996: Specify smd-edge for ADSP
  arm64: dts: msm8996: Add modem smp2p nodes
  arm64: dts: qcom: db820c: Add pm8994 regulator node
  arm64: dts: qcom: Add RPM glink nodes to msm8996
  arm64: dts: msm8996: Add device node for qcom,dwc3
  arm64: dts: msm8996: Add device node for qcom qmp-phy for pcie
  arm64: dts: msm8996: Add device node for qcom qmp-phy for usb
  arm64: dts: msm8996: Add device node for qcom qusb2 phy
  arm64: dts: qcom: add cec clock for apq8016 board
  arm64: dts: pmi8994: Add device node for pmi8994 gpios
  arm64: dts: qcom-msm8916: dts: Update coresight replicator
  arm64: dts: qcom: Force host mode for USB on apq8016-sbc

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.14" from Wei Xu:

- Add PCIe node for hip07
- Add acpu_sctrl node and refine the usb tx fifo size for hi6220
- Add cpu idle states, L2 cache, PMU, OP-TEE, reboot, pstore,
  k3-dma and watchdog nodes for hi3660 and hikey960
- Update mmc and bluetooth nodes for hi3660 and hikey960

* tag 'hisi-arm64-dt-for-4.14-v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi3660: enable watchdog
  arm64: dts: hi3660: add bindings for DMA
  arm64: dts: hikey960: change bluetooth uart max-speed to 3mbps
  arm64: dts: hi3660: Reset the mmc hosts
  arm64: dts: hikey960: Add pstore support
  arm64: dts: hikey960: Add support for syscon-reboot-mode
  arm64: dts: hikey960: Add optee node
  arm64: dts: hi3660: add pmu dt node for hi3660
  arm64: dts: hi3660: add L2 cache topology
  arm64: dts: hi3660: enable idle states
  arm64: dts: hi6220: improve g-tx-fifo-size setting for usb device
  arm64: dts: hi6220: add acpu_sctrl
  arm64: dts: hisi: add PCIe host controller node for hip07 SoC

Merge tag 'uniphier-dt64-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Pull "UniPhier ARM64 SoC DT updates for v4.14" from Masahiro Yamada:

- add nodes for NAND, Watchdog
- replace /include/ with #include
- use #include <arm/...> instead of symlinks

* tag 'uniphier-dt64-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add Denali NAND controller nodes
  arm64: dts: uniphier: use cross-arch include instead of symlinks
  arm64: dts: uniphier: use #include instead of /include/
  arm64: dts: uniphier: add watchdog node for LD11 and LD20

Merge tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64

Pull "ARMv8 Vexpress/Juno DT updates for v4.14" from Sudeep Holla:

1. Replaces old coresight ATB programmable replicator compatible with
   new and more generic one

2. Replaces incorrect usage of underscores for device node names in the
   device tree with hyphen

* tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: replace underscores with hyphen in device node names
  arm64: dts: juno: Use the new coresight replicator string

Merge tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64

Pull "Allwinner arm64 DT changes for 4.14" from Chen-Yu Tsai:

The usual improvement patches:

  - R_INTC interrupt controller enabled for the A64 SoC

  - AXP803 PMIC added and enabled on the Pine64 and SoPine boards

* tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: add AXP803 PMIC support to SoPine and the baseboard
  arm64: allwinner: a64: enable AXP803 regulators for Pine64
  arm64: allwinner: a64: add DTSI file for AXP803 PMIC
  arm64: allwinner: a64: add AXP803 node to Pine64 device tree
  arm64: allwinner: a64: add NMI (R_INTC) controller on A64

Merge tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "Rockchip dts64 changes for 4.14" from Heiko Stübner:

64bit Rockchip devicetree changes containing fixes for pinctrl typos
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.

rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.

The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.

The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.

* tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: update dynamic-power-coefficient for rk3399
  arm64: dts: rockchip: add rk3328 spdif node
  arm64: dts: rockchip: add rk3368 spdif node
  arm64: dts: rockchip: enable sdmmc controller on rk3399-firefly
  arm64: dts: rockchip: Add rk3328 io-domain node
  arm64: dts: rockchip: kill pcie_clkreqn and pcie_clkreqnb for rk3399
  arm64: dts: rockchip: change clkreq mode for rk3399-firefly
  arm64: dts: rockchip: enable the GPU for RK3399-GRU
  arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs
  dt-bindings: gpu: add the RK3399 mali for rockchip specifics
  arm64: dts: rockchip: remove abused keep-power-in-suspend
  arm64: dts: rockchip: remove num-slots from all platforms
  arm64: dts: rockchip: change clkreq mode for rk3399-evb
  arm64: dts: rockchip: add SdioAudio pd control for rk3399
  arm64: dts: rockchip: enable usb2 for RK3328 evaluation board
  arm64: dts: rockchip: add usb2 nodes for RK3328 SoCs
  arm64: dts: rockchip: set rk3399 dynamic CPU power coefficients
  arm64: dts: rockchip: Use vctrl regulators for dynamic CPU voltages on Gru/Kevin
  arm64: dts: rockchip: Update CPU regulator voltage ranges for Gru
  arm64: dts: rockchip: fix typo in mmc pinctrl

Pull "mvebu dt64 for 4.14 (part 1)" from Gregory CLEMENT:

For Armada 37xx:
- GIC improvement
- Add PMUv3
- Enable USB2 on EspressoBin

For Armada 7K/8K:
- add GPIO interrupts for CP110
- add pinctrl nodes to describe the CPM I2C0 and CPS SPI1
- re-order RTC nodes in Marvell CP110 description
- on MacchiatoBin
    - fix USB3 regulator definition
    - add support for i2c mux
    - add support for PCIe
    - add an stdout-path

* tag 'mvebu-dt64-4.14-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: re-order RTC nodes in Marvell CP110 description
  arm64: dts: marvell: mcbin: add an stdout-path
  arm64: dts: marvell: mcbin: add support for PCIe
  arm64: dts: marvell: mcbin: add support for i2c mux
  arm64: dts: marvell: fix USB3 regulator definition on MacchiatoBin
  arm64: dts: marvell: mcbin: add pinctrl nodes
  arm64: dts: marvell: cp110: add GPIO interrupts
  ARM64: dts: marvell: armada-37xx: Enable USB2 on espressobin
  ARM64: dts: marvell: armada-37xx: Wire PMUv3
  ARM64: dts: marvell: armada-37xx: Enable memory-mapped GIC CPU interface
  ARM64: dts: marvell: armada-37xx: Fix GIC maintenance interrupt

Merge tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Pull "Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:

* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC

* Add R-Car D3 (r8a77995) SoC and Draak board support

  Adds minimal support for the R-Car D3 SoC and the Draak development
  board, allowing to boot from a ramdisk using a serial console.

* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board

  The VC6 is an I2C-controlled programmable clock generator, used on the
  board to provide a display dot clock. Add it to DT.

* Add missing second pair of DMA names to MSIOF nodes to
  R-Car M3-W (r8a7796) SoC

  MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
  DMA specifiers.  However, the second pair of corresponding DMA names was
  missing.

* Add support for the DU to R-Car H3 (r8a7795) SoC

  Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
  ES2.0 are compatible save for the links to the VSPs that are described
  explicitly in DT, so there's no need for a new ES2-specific compatible
  string.

* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards

* Enable DU on R-Car M3-W (r8a7796) Salvator-X board

* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards

* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs

  Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
  slave device."

* Move CPG_AUDIO_CLK_I from board to soc files

  Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
  SoC-specific, not board-specific."

* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs

  Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
  the distortion correction engine is a drawing processor with a simple
  instruction system capable of referencing data on an external memory as
  2D texture data and performing texture mapping and drawing with respect
  to any shape that is split into triangular objects."

* tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
  arm64: dts: renesas: r8a7795: add hsusb ch3 device node
  arm64: dts: renesas: r8a7795: add usb-dmac ch2 and ch3 device nodes
  arm64: dts: renesas: r8a7795: add usb2.0 host ch3 device nodes
  arm64: dts: renesas: r8a7795: add usb2_phy ch3 device node
  arm64: dts: renesas: r8a7795: Add usb companion property in EHCI
  arm64: dts: renesas: Add Renesas Draak board support
  arm64: dts: renesas: Add Renesas R8A77995 SoC support
  arm64: renesas: Add Renesas R8A77995 Kconfig support
  arm64: dts: r8a7795: salvator-xs: Connect DU dot clocks 0 and 3
  arm64: dts: salvator-xs: Add VC6 clock generator
  arm64: dts: r8a7796: Add missing second pair of DMA names to MSIOF nodes
  arm64: dts: r8a7795: Add all MSIOF nodes
  arm64: dts: r8a7795: Add support for the DU
  arm64: dts: ulcb: Enable HDMI output
  arm64: dts: ulcb: Add HDMI output connector
  arm64: dts: r8a7796: m3ulcb: Add DU external dot clocks
  arm64: dts: r8a7795: h3ulcb: Add DU external dot clocks
  arm64: dts: ulcb: Add DU external dot clock sources
  arm64: dts: r8a7796: salvator-x: Enable HDMI output
  arm64: dts: r8a7796: salvator-x: Add DU external dot clocks
  ...

Merge tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Pull "Samsung DTS ARM64 changes for v4.14" from Krzysztof Kozłowski:

1. Remove deprecated and unneeded properties from Exynos boards.
2. Implement proper (working) support for USB On-The-Go on Exynos5433
   TM2/TM2E boards.

* tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Remove num-slots from exynos platforms
  arm64: dts: exynos: Add extcon property for TM2 and TM2E
  arm64: dts: exynos: Fix wrong label for USB 3.0 controller node
  arm64: dts: exynos: Remove the OF graph from DSI node

This patch adds the IOMMU node for the IOMMU that resides on the
Qualcomm MSM8916 platforms.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds the Qualcomm Venus video codec node for the video
codec hardware residing on MSM8916 platforms.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch is to add watchdog binding for Hi3660 on Hikey960 board.

Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add bindings for DMA.
Signed-off-by: Wang Ruyi <wangruyi@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Update bluetooth UART max-speed to 3Mbps
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add reset-names = "reset" into mmc nodes.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch reserves some memory in the DTS and sets up a
pstore device tree node to enable pstore support on HiKey960.

Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add support to hikey960 dts for the syscon-reboot-mode driver.

Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds op-tee node for hikey960
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add pmu dt node for hi3660
Signed-off-by: YiPing Xu <xuyiping@hisilicon.com>
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Jumana Mundichipparakkal <jumana.mp@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds the L2 cache topology on 96boards Hikey960.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

There are two clusters on the Hi3660, the first one is Cortex-A53 based
and the other one is Cortex-A73 based. These two clusters have different
idle states.

Thanks to Daniel Lezcano's recent changes, the generic ARM cpuidle
driver can now support several clusters with different idle states, thus
supporting the big.Little architecture.

In addition to the WFI idle state which is the default shallowest state
for all ARM cpus, the Hi3660 supports the following states:

 - CA53 CPUs:
        - CPU_SLEEP:       CPU power off state
        - CLUSTER_SLEEP_0: Cluster power off state

 - CA73 CPUs:
        - CPU_NAP:         CPU retention state
        - CPU_SLEEP:       CPU power off state
        - CLUSTER_SLEEP_1: Cluster power off state

This patch adds the idle states description for the Hi3660 to the device
tree.

Cc: Kevin Wang <jean.wangtao@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The current usb device g-tx-fifo-size setting in DT causes two problems
for kernel driver.

1. On hi6220, there are 15 tx_fifo dedicated for all EPs except EP0,
   while DT only provides tx_fifo settings for 6 EPs.  It results in the
   following annoying complaints from kernel.

[    4.451623] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=0
[    4.461303] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=0
[    4.470969] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=0
[    4.480632] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=0
[    4.490385] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=0
[    4.500140] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=0
[    4.509892] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=0
[    4.519646] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=0
[    4.529399] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=0
[    4.539244] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM

   Besides of that, the total 1920 fifo entries isn't fully utilized.
   Endpoint Info Control block consumes 128 entries, g-rx-fifo-size
   is 512, and g-np-tx-fifo-size is 128.  So the fifi entries available
   for tx_fifo is: 1920 - 128 - 512 - 128 = 1152.  Considering that
   the minimal valid tx_fifo size for each EP is 16, it should be
   reasonable to allocate 1152 entries as: 128 x 8 + 16 x 7 = 1136 (only
   16 entries unused).  With this new setting, we can get more EPs to
   use while removing the above warning messages in the meantime.

2. Another consequence of above invalid g_tx_fifo_size parameter is that
   kernel driver will use values read from hardware register as the
   fall-back.  The value is 2048 for each EP fifo.  That's obviously
   invalid either, because even fifo entries for one EP exceeds the
   total entries 1920.  That's why we see the following fat warning from
   function dwc2_hsotg_init_fifo().  The new g-tx-fifo-size settings
   help to remove the warning as well.

[   65.431634] dwc2 f72c0000.usb: Do port resume before switching to device mode
[   65.624176] insufficient fifo memory
[   65.624369] ------------[ cut here ]------------
[   65.633633] WARNING: CPU: 0 PID: 5 at drivers/usb/dwc2/gadget.c:330 dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.643808] CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.13.0-rc1-00022-g50861cf9dc1b-dirty #81
[   65.653769] Hardware name: HiKey Development Board (DT)
[   65.659624] Workqueue: dwc2 dwc2_conn_id_status_change
[   65.665377] task: ffffffc005f73400 task.stack: ffffffc005f98000
[   65.671987] PC is at dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.677633] LR is at dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.683275] pc : [<ffffff8008638044>] lr : [<ffffff8008638044>] pstate: 600001c5
[   65.691504] sp : ffffffc005f9bce0
[   65.695218] x29: ffffffc005f9bce0 x28: ffffffc005f6ac00
[   65.701172] x27: ffffffc005f73400 x26: 0000000008000580
[   65.707124] x25: ffffff8008bb4af0 x24: ffffff8008d02b70
[   65.713074] x23: 0000003fcc831084 x22: ffffffc0337cf0bc
[   65.719024] x21: 0000000000000580 x20: ffffffc0337cf018
[   65.724976] x19: ffffffc0337cf098 x18: 0000000000000000
[   65.730926] x17: 0000000000000000 x16: 0000000000000000
[   65.736873] x15: 0000000000000000 x14: ffffff8008ca8900
[   65.742825] x13: 0000004035299000 x12: 0000000034d5d91d
[   65.748775] x11: 0000000000000000 x10: 00000000000008d0
[   65.754726] x9 : ffffffc005f9bce0 x8 : 00000000000001b5
[   65.760674] x7 : 66696620746e6569 x6 : ffffff8008d60050
[   65.766623] x5 : 0000000000000000 x4 : 0000000000000000
[   65.772573] x3 : 0000000000000002 x2 : 0000000000000002
[   65.778521] x1 : 0000000000000001 x0 : 0000000000000018
[   65.784469] Call trace:
[   65.787236] Exception stack(0xffffffc005f9bb10 to 0xffffffc005f9bc40)
[   65.794420] bb00:                                   ffffffc0337cf098 0000008000000000
[   65.803145] bb20: ffffffc005f9bce0 ffffff8008638044 ffffff8008bb4af0 0000000008000580
[   65.811870] bb40: ffffffc005f73400 ffffffc005f6ac00 0000000000000000 ffffff8008da2998
[   65.820595] bb60: ffffffc005f9bce0 ffffffc005f9bce0 ffffffc005f9bca0 00000000ffffffc8
[   65.829315] bb80: ffffffc005f9bbb0 ffffff80081046a0 ffffffc005f9bce0 ffffffc005f9bce0
[   65.838038] bba0: ffffffc005f9bca0 00000000ffffffc8 0000000000000018 0000000000000001
[   65.846761] bbc0: 0000000000000002 0000000000000002 0000000000000000 0000000000000000
[   65.855485] bbe0: ffffff8008d60050 66696620746e6569 00000000000001b5 ffffffc005f9bce0
[   65.864207] bc00: 00000000000008d0 0000000000000000 0000000034d5d91d 0000004035299000
[   65.872928] bc20: ffffff8008ca8900 0000000000000000 0000000000000000 0000000000000000
[   65.900856] [<ffffff8008638044>] dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.927195] [<ffffff800863b390>] dwc2_hsotg_core_init_disconnected+0x80/0x3c0
[   65.954736] [<ffffff800862fef0>] dwc2_conn_id_status_change+0xfc/0x21c
[   65.981561] [<ffffff80080d1ca8>] process_one_work+0x124/0x294
[   66.007419] [<ffffff80080d1e70>] worker_thread+0x58/0x3c8
[   66.023243] [<ffffff80080d79a0>] kthread+0x100/0x12c
[   66.032455] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50
[   66.041987] ---[ end trace 7079dcaa2d9e46fa ]---
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Add acpu_sctrl clock node
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds the Qualcomm Adreno GPU node that exists in the
MSM8916.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add one PCIe host controller node for HiSilicon Hip07 SoC and enable it in
D05 board.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

ls208xa supports another cpu idle state which is pw20 which saves
more power when cpu is idle.
It was implemented through psci firmware.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

ls1088a supports another cpu idle state which is ph20 which saves
more power when cpu is idle.
It was implemented through psci firmware.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add NAND controller node to LD11 and LD20.  Neither of them supports
the CS1 line, so pinctrl is set up for a single CS line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

On UniPhier platform, some DTSI files are shared between arm and arm64.
Recently, inclusion of DT material of different architectures has been
supported by the build system level.  Use #include <arm/...>, which
will work without relying on the exact same hierarchy as the kernel.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

To include dt-bindings headers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>