- 18 Mar, 2015 25 commits
-
-
Or Gerlitz authored
Add ndo_set_tx_maxrate support. To support per tx queue maxrate limit, we use the update-qp firmware command to do run-time rate setting for the qp that serves this tx ring. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Add the low-level device commands and definitions used for QP max-rate limiting. This is done through the following elements: - read rate-limit device caps in QUERY_DEV_CAP: number of different rates and the min/max rates in Kbs/Mbs/Gbs units - enhance the QP context struct to contain rate limit units and value - allow to do run time rate-limit setting to QPs through the update-qp firmware command - QP rate-limiting is disallowed for VFs Signed-off-by: -
John Fastabend authored
This adds a tx_maxrate attribute to the tx queue sysfs entry allowing for max-rate limiting. Along with DCB-ETS and BQL this provides another knob to tune queue performance. The limit units are Mbps. By default it is disabled. To disable the rate limitation after it has been set for a queue, it should be set to zero. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
David S. Miller authored
Herbert Xu says: ==================== rhashtable: Kill redundant shift parameter I was trying to squeeze bucket_table->rehash in by downsizing bucket_table->size, only to find that my spot had been taken over by bucket_table->shift. These patches kill shift and makes me feel better :) v2 corrects the typo in the test_rhashtable changelog and also notes the min_shift parameter in the tipc patch changelog. ==================== Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Herbert Xu authored
Now that nobody uses max_shift and min_shift, we can safely remove them. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
This patch converts test_rhashtable to use rhashtable max_size instead of the obsolete max_shift. Signed-off-by:
-
Herbert Xu authored
This patch converts tipc to use rhashtable max/min_size instead of the obsolete max/min_shift. Signed-off-by:
-
Herbert Xu authored
This patch converts netlink to use rhashtable max_size instead of the obsolete max_shift. Signed-off-by:
-
Herbert Xu authored
This patch adds the parameters max_size and min_size which are meant to replace max_shift and min_shift. Signed-off-by:
-
Herbert Xu authored
Keeping both size and shift is silly. We only need one. Signed-off-by:
-
David S. Miller authored
Keyur Chudgar says: ==================== drivers: net: xgene: Add second SGMII based 1G interface This patch adds support for second SGMII based 1G interface. ==================== Signed-off-by:
Keyur Chudgar <kchudgar@apm.com> Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Keyur Chudgar authored
- Added resource initialization based on port-id field - Enabled second SGMII 1G interface Signed-off-by:
-
Keyur Chudgar authored
- Added new SGMII node for port 1 - Added port-id field Signed-off-by:
-
Keyur Chudgar authored
Signed-off-by:
-
David S. Miller authored
Ying Xue says: ==================== tipc: fix netns refcnt leak The series aims to eliminate the issue of netns refcount leak. But during fixing it, another two additional problems are found. So all of known issues associated with the netns refcnt leak are resolved at the same time in the patchset. ==================== Signed-off-by: -
Ying Xue authored
The TIPC topology server is a per namespace service associated with the tipc name {1, 1}. When a namespace is deleted, that name must be withdrawn before we call sk_release_kernel because the kernel socket release is done in init_net and trying to withdraw a TIPC name published in another namespace will fail with an error as: [ 170.093264] Unable to remove local publication [ 170.093264] (type=1, lower=1, ref=2184244004, key=2184244005) We fix this by breaking the association between the topology server name and socket before calling sk_release_kernel. Signed-off-by:Ying Xue <ying.xue@windriver.com> Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Signed-off-by:
-
Ying Xue authored
[ 28.531768] ============================================= [ 28.532322] [ INFO: possible recursive locking detected ] [ 28.532322] 3.19.0+ #194 Not tainted [ 28.532322] --------------------------------------------- [ 28.532322] insmod/583 is trying to acquire lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [ 28.532322] but task is already holding lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] other info that might help us debug this: [ 28.532322] Possible unsafe locking scenario: [ 28.532322] [ 28.532322] CPU0 [ 28.532322] ---- [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] [ 28.532322] *** DEADLOCK *** [ 28.532322] [ 28.532322] May be due to missing lock nesting notation [ 28.532322] [ 28.532322] 3 locks held by insmod/583: [ 28.532322] #0: (net_mutex){+.+.+.}, at: [<ffffffff8163e30f>] register_pernet_subsys+0x1f/0x50 [ 28.532322] #1: (&(&tn->nametbl_lock)->rlock){+.....}, at: [<ffffffffa000e091>] tipc_nametbl_stop+0xb1/0x1f0 [tipc] [ 28.532322] #2: (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] stack backtrace: [ 28.532322] CPU: 1 PID: 583 Comm: insmod Not tainted 3.19.0+ #194 [ 28.532322] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.532322] ffffffff82394460 ffff8800144cb928 ffffffff81792f3e 0000000000000007 [ 28.532322] ffffffff82394460 ffff8800144cba28 ffffffff810a8080 ffff8800144cb998 [ 28.532322] ffffffff810a4df3 ffff880013e9cb10 ffffffff82b0d330 ffff880013e9cb38 [ 28.532322] Call Trace: [ 28.532322] [<ffffffff81792f3e>] dump_stack+0x4c/0x65 [ 28.532322] [<ffffffff810a8080>] __lock_acquire+0x740/0x1ca0 [ 28.532322] [<ffffffff810a4df3>] ? __bfs+0x23/0x270 [ 28.532322] [<ffffffff810a7506>] ? check_irq_usage+0x96/0xe0 [ 28.532322] [<ffffffff810a8a73>] ? __lock_acquire+0x1133/0x1ca0 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000e11e>] tipc_nametbl_stop+0x13e/0x1f0 [tipc] [ 28.532322] [<ffffffffa000dfe5>] ? tipc_nametbl_stop+0x5/0x1f0 [tipc] [ 28.532322] [<ffffffffa0004bab>] tipc_init_net+0x13b/0x150 [tipc] [ 28.532322] [<ffffffffa0004a75>] ? tipc_init_net+0x5/0x150 [tipc] [ 28.532322] [<ffffffff8163dece>] ops_init+0x4e/0x150 [ 28.532322] [<ffffffff810aa66d>] ? trace_hardirqs_on+0xd/0x10 [ 28.532322] [<ffffffff8163e1d3>] register_pernet_operations+0xf3/0x190 [ 28.532322] [<ffffffff8163e31e>] register_pernet_subsys+0x2e/0x50 [ 28.532322] [<ffffffffa002406a>] tipc_init+0x6a/0x1000 [tipc] [ 28.532322] [<ffffffffa0024000>] ? 0xffffffffa0024000 [ 28.532322] [<ffffffff810002d9>] do_one_initcall+0x89/0x1c0 [ 28.532322] [<ffffffff811b7cb0>] ? kmem_cache_alloc_trace+0x50/0x1b0 [ 28.532322] [<ffffffff810e725b>] ? do_init_module+0x2b/0x200 [ 28.532322] [<ffffffff810e7294>] do_init_module+0x64/0x200 [ 28.532322] [<ffffffff810e9353>] load_module+0x12f3/0x18e0 [ 28.532322] [<ffffffff810e5890>] ? show_initstate+0x50/0x50 [ 28.532322] [<ffffffff810e9a19>] SyS_init_module+0xd9/0x110 [ 28.532322] [<ffffffff8179f3b3>] sysenter_dispatch+0x7/0x1f Before tipc_purge_publications() calls tipc_nametbl_remove_publ() to remove a publication with a name sequence, the name sequence's lock is held. However, when tipc_nametbl_remove_publ() calling tipc_nameseq_remove_publ() to remove the publication, it first tries to query name sequence instance with the publication, and then holds the lock of the found name sequence. But as the lock may be already taken in tipc_purge_publications(), deadlock happens like above scenario demonstrated. As tipc_nameseq_remove_publ() doesn't grab name sequence's lock, the deadlock can be avoided if it's directly invoked by tipc_purge_publications(). Fixes: 97ede29e ("tipc: convert name table read-write lock to RCU") Signed-off-by: -
Ying Xue authored
When the TIPC module is loaded, we launch a topology server in kernel space, which in its turn is creating TIPC sockets for communication with topology server users. Because both the socket's creator and provider reside in the same module, it is necessary that the TIPC module's reference count remains zero after the server is started and the socket created; otherwise it becomes impossible to perform "rmmod" even on an idle module. Currently, we achieve this by defining a separate "tipc_proto_kern" protocol struct, that is used only for kernel space socket allocations. This structure has the "owner" field set to NULL, which restricts the module reference count from being be bumped when sk_alloc() for local sockets is called. Furthermore, we have defined three kernel-specific functions, tipc_sock_create_local(), tipc_sock_release_local() and tipc_sock_accept_local(), to avoid the module counter being modified when module local sockets are created or deleted. This has worked well until we introduced name space support. However, after name space support was introduced, we have observed that a reference count leak occurs, because the netns counter is not decremented in tipc_sock_delete_local(). This commit remedies this problem. But instead of just modifying tipc_sock_delete_local(), we eliminate the whole parallel socket handling infrastructure, and start using the regular sk_create_kern(), kernel_accept() and sk_release_kernel() calls. Since those functions manipulate the module counter, we must now compensate for that by explicitly decrementing the counter after module local sockets are created, and increment it just before calling sk_release_kernel(). Fixes: a62fbcce ("tipc: make subscriber server support net namespace") Signed-off-by:
Jon Maloy <jon.maloy@ericson.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Tested-by:
-
David S. Miller authored
Eric Dumazet says: ==================== inet: tcp listener refactoring, part 12 By adding a pointer back to listener, we are preparing synack rtx handling to no longer be governed by listener keepalive timer, as this is the most problematic source of contention on listener spinlock. Note that TCP FastOpen had such pointer anyway, so we make it generic. ==================== Signed-off-by: -
Eric Dumazet authored
While testing last patch series, I found req sock refcounting was wrong. We must set skc_refcnt to 1 for all request socks added in hashes, but also on request sockets created by FastOpen or syncookies. It is tricky because we need to defer this initialization so that future RCU lookups do not try to take a refcount on a not yet fully initialized request socket. Also get rid of ireq_refcnt alias. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: 13854e5a ("inet: add proper refcounting to request sock") Signed-off-by:
-
Eric Dumazet authored
It is not because a TCP listener is FastOpen ready that all incoming sockets actually used FastOpen. Avoid taking queue->fastopenq->lock if not needed. Signed-off-by:
-
Eric Dumazet authored
The listener field in struct tcp_request_sock is a pointer back to the listener. We now have req->rsk_listener, so TCP only needs one boolean and not a full pointer. Signed-off-by:
-
Eric Dumazet authored
Once we'll be able to lookup request sockets in ehash table, we'll need to get access to listener which created this request. This avoid doing a lookup to find the listener, which benefits for a more solid SO_REUSEPORT, and is needed once we no longer queue request sock into a listener private queue. Note that 'struct tcp_request_sock'->listener could be reduced to a single bit, as TFO listener should match req->rsk_listener. TFO will no longer need to hold a reference on the listener. Signed-off-by:
-
Eric Dumazet authored
inet_reqsk_alloc() is becoming fat and should not be inlined. Signed-off-by:
-
Eric Dumazet authored
listener socket can be used to set net pointer, and will be later used to hold a reference on listener. Add a const qualifier to first argument (struct request_sock_ops *), and factorize all write_pnet(&ireq->ireq_net, sock_net(sk)); Signed-off-by:
-
- 17 Mar, 2015 15 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== inet: tcp listener refactoring, part 11 Before inserting request sockets into general (ehash) table, we need to prepare netfilter to cope with them, as they are not full sockets. I'll later change xt_socket to get full support, including for request sockets (NEW_SYN_RECV) Save 8 bytes in inet_request_sock on 64bit arches. We'll soon add a pointer to the listener socket. I included two TCP changes in this patch series. ==================== Signed-off-by: -
Eric Dumazet authored
tcp_oow_rate_limited() is hardly used in fast path, there is no point inlining it. Signed-of-by:
-
Eric Dumazet authored
This big helper is called once from tcp_conn_request(), there is no point having it in an include. Compiler will inline it anyway. Signed-off-by:
-
Eric Dumazet authored
On 64bit arches, we can save 8 bytes in inet_request_sock by moving ir_mark to fill a hole. While we are at it, inet_request_mark() can get a const qualifier for listener socket. Signed-off-by:
-
Eric Dumazet authored
TCP request socks soon will be visible in ehash table. xt_socket will be able to match them, but first we need to make sure to not consider them as full sockets. Signed-off-by:
-
Eric Dumazet authored
TCP request socks soon will be visible in ehash table. Signed-off-by:
-
Eric Dumazet authored
Upcoming request sockets have TCP_NEW_SYN_RECV state and should be special cased a bit like TCP_TIME_WAIT sockets. Signed-off-by; Eric Dumazet <edumazet@google.com> Signed-off-by: -
Alexei Starovoitov authored
as a follow on to patch 70006af9 ("bpf: allow eBPF access skb fields") this patch allows 'protocol' and 'vlan_tci' fields to be accessible from extended BPF programs. The usage of 'protocol', 'vlan_present' and 'vlan_tci' fields is the same as corresponding SKF_AD_PROTOCOL, SKF_AD_VLAN_TAG_PRESENT and SKF_AD_VLAN_TAG accesses in classic BPF. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Fabian Frederick says: ==================== drivers/net: constify of_device_id array This small patchset adds const to of_device_id arrays in drivers/net branch. ==================== Signed-off-by: -
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
-
