Append .5 to KiB display when there are an odd number of sectors.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

Correctly allocate memory to meet the host controller
driver's maximum segment size and count limits.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

As proposed by Greg K-H it is more logical to keep files for the mmc_test
driver under debugfs.

Additionally this patch brings seq_file API for show() method.  It allows
to write unlimited data to the file.

Example of usage:
  # mount -t debugfs none /sys/kernel/debug
  # modprobe mmc_test
    [  581.395843] mmc_test mmc0:0001: Card claimed for testing.
  # echo 25 > /sys/kernel/debug/mmc0/mmc0\:0001/test
    [  604.568542] mmc0: Starting tests of card mmc0:0001...
    [  604.582733] mmc0: Test case 25. Best-case read performance into scattered pages...
    [  604.923553] mmc0: Transfer of 8192 sectors (4096 KiB) took 0.124664314 seconds (33644 kB/s, 32856 KiB/s)
    [  604.933227] mmc0: Result: OK
    [  604.936248] mmc0: Tests completed.
  # cat /sys/kernel/debug/mmc0/mmc0\:0001/test
    Test 25: 0
    1 8192 0.124664314 33644784
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Greg KH <greg@kroah.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Make it possible to get test results via sysfs.  It helps to do tests
non-interactively.  We have the file created under sysfs already and
can use it to show test results.

Prior to this patch, the "test" file under each card's sysfs node was
write-only, and results were obtained by looking at dmesg.  This patch
improves programmatic access to the test results, making them available by
reading back from the same "test" file:

[root@host mmc0:e624]# echo 6 > test
[root@host mmc0:e624]# cat test
Test 6: 2

[cjb@laptop.org: changelog improvements]
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

It's better to use strict_strtol() to convert user's input and strictly
check it. At least it forbids to interpret wrong input as a 0 and
prevents to run all tests.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

There are methods to check card type. Let's use them instead of direct checking
type bits.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

The host controller driver limits I/O transfers to maximum
transfer size, maximum block count, maximum segment size
and maximum segment count.  The performance tests were
not obeying these limits which meant they would not work
with some drivers.  This patch fixes that.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Chris Ball <cjb@laptop.org>

Global symbols should use their subsystem name in a prefixed fashion.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Conversion from struct device to struct mmc_card is used more than in one
place.  Due to this it's better to have public macro for such thing.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Fix an issue found by klockwork. Just paranoia.
Signed-off-by: JiebingLi <jiebing.li@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

Add a driver for USB SD Host Controller devices.  These devices are
Cypress Astoria chips with firmware compliant with issue 2 of CSR's USHC
specification.

[cjb: adapt to block layer deprecation of max_{hw,phys}_segs]
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

We have deprecated the distinction between hardware and physical
segments in the block layer.  Consolidate the two limits into one in
drivers/mmc/.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

[cjb: rebased patch against Linus]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: <linux-mmc@vger.kernel.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

[cjb: rebased patch against Linus]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

[cjb: rebased patch against Linus]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits)
  nilfs2: eliminate sparse warning - "context imbalance"
  nilfs2: eliminate sparse warnings - "symbol not declared"
  nilfs2: get rid of bdi from nilfs object
  nilfs2: change license of exported header file
  nilfs2: add bdev freeze/thaw support
  nilfs2: accept 64-bit checkpoint numbers in cp mount option
  nilfs2: remove own inode allocator and destructor for metadata files
  nilfs2: get rid of back pointer to writable sb instance
  nilfs2: get rid of mi_nilfs back pointer to nilfs object
  nilfs2: see state of root dentry for mount check of snapshots
  nilfs2: use iget for all metadata files
  nilfs2: get rid of GCDAT inode
  nilfs2: add routines to redirect access to buffers of DAT file
  nilfs2: add routines to roll back state of DAT file
  nilfs2: add routines to save and restore bmap state
  nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes
  nilfs2: allow nilfs_clear_inode to clear metadata file inodes
  nilfs2: get rid of snapshot mount flag
  nilfs2: simplify life cycle management of nilfs object
  nilfs2: do not allocate multiple super block instances for a device
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (47 commits)
  Blackfin: bfin_spi.h: add MMR peripheral layout
  Blackfin: bfin_ppi.h: start a common PPI/EPPI header
  Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
  Blackfin: bf538: add missing SIC_RVECT define
  Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx
  Blackfin: bf54x: add missing SIC_RVECT definition
  Blackfin: H8606: move 8250 irqflags to platform resources
  Blackfin: glue XIP/ROM kernel kconfigs
  Blackfin: update sparse flags for latest upstream changes
  Blackfin: coreb: update ioctl numbers
  Blackfin: coreb: add gpl module license
  Blackfin: bf518-ezkit: add ssm2603 codec resources
  Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers
  Blackfin: tll6527m: new board port
  Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot
  Blackfin: merge kernel init memory back into main memory region
  Blackfin: gpio: add peripheral group check
  Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ
  Blackfin: add new cacheflush syscall
  Blackfin: bf548-ezkit: increase u-boot partition size
  ...

Merge branch 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, mm: Add an initial page table for core bootstrapping

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb,debug_core: adjust master cpu switch logic against new debug_core locking
  debug_core: refactor locking for master/slave cpus
  x86,kgdb: remove unnecessary call to kgdb_correct_hw_break()
  debug_core: disable hw_breakpoints on all cores in kgdb_cpu_enter()
  kdb,kgdb: fix sparse fixups
  kdb: Fix oops in kdb_unregister
  kdb,ftdump: Remove reference to internal kdb include
  kdb: Allow kernel loadable modules to add kdb shell functions
  debug_core: stop rcu warnings on kernel resume
  debug_core: move all watch dog syncs to a single function
  x86,kgdb: fix debugger hw breakpoint test regression in 2.6.35

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...

Commit dd3932ed ("block: remove BLKDEV_IFL_WAIT") had removed the
flag argument to blkdev_issue_flush(), but the ocfs2 merge brought in a
new one.  It didn't cause a merge conflict, so the merges silently
worked out fine, but the result didn't actually compile.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (56 commits)
  [CIFS] move close processing  from cifs_close to cifsFileInfo_put
  cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
  cifs: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
  Clean up two declarations of blob_len
  cifs: move cifsFileInfo_put to file.c
  cifs: convert GlobalSMBSeslock from a rwlock to regular spinlock
  [CIFS] Fix minor checkpatch warning and update cifs version
  cifs: move cifs_new_fileinfo to file.c
  cifs: eliminate pfile pointer from cifsFileInfo
  cifs: cifs_write argument change and cleanup
  cifs: clean up cifs_reopen_file
  cifs: eliminate the inode argument from cifs_new_fileinfo
  cifs: eliminate oflags option from cifs_new_fileinfo
  cifs: fix flags handling in cifs_posix_open
  cifs: eliminate cifs_posix_open_inode_helper
  cifs: handle FindFirst failure gracefully
  NTLM authentication and signing - Calculate auth response per smb session
  cifs: don't use vfsmount to pin superblock for oplock breaks
  cifs: keep dentry reference in cifsFileInfo instead of inode reference
  cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)
  ...

Fix up trivial conflict in fs/cifs/cifsfs.c due to added/removed header files

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits)
  [SCSI] be2iscsi: SGE Len == 64K
  [SCSI] be2iscsi: Remove premature free of cid
  [SCSI] be2iscsi: More time for FW
  [SCSI] libsas: fix bug for vacant phy
  [SCSI] sd: Fix overflow with big physical blocks
  [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer
  [SCSI] libsas: Don't issue commands to devices that have been hot-removed
  [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
  [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17
  [SCSI] lpfc 8.3.17: Replace function reset methodology
  [SCSI] lpfc 8.3.17: SCSI fixes
  [SCSI] lpfc 8.3.17: BSG fixes
  [SCSI] lpfc 8.3.17: SLI Additions and Fixes
  [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes
  [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
  [SCSI] ipr: fix array error logging
  [SCSI] aha152x: enable PCMCIA on 64bit
  [SCSI] scsi_dh_alua: Handle all states correctly
  [SCSI] cxgb4i: connection and ddp setting update
  [SCSI] cxgb3i: fixed connection over vlan
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA
  m68k: Remove big kernel lock in cache flush code
  m68k: __pa(): cast arg to long
  fbdev: atafb - Remove undead ifdef ATAFB_FALCON
  zorro: Fix device_register() error handling
  fbdev/m68k: Fix section mismatches in q40fb.c
  m68k/m68knommu: merge the MMU and non-MMU traps.h
  m68k/m68knommu: merge MMU and non-MMU thread_info.h
  m68k/m68knommu: merge MMU and non-MMU atomic.h
  m68k/m68knommu: clean up page.h
  m68k/m68knommu: merge machdep.h files into a single file
  m68k/m68knommu: merge MMU and non-MMU string.h
  m68k/m68knommu: Remove dead SMP config option
  m68k: move definition of THREAD_SIZE into thread_info_mm.h
  m68k: Use asm-generic/ioctls.h (enables termiox)
  m68k: Remove dead GG2 config option

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: Fix dlm lock status block comment in dlm.h
  dlm: Don't send callback to node making lock request when "try 1cb" fails

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (36 commits)
  xfs: semaphore cleanup
  xfs: Extend project quotas to support 32bit project ids
  xfs: remove xfs_buf wrappers
  xfs: remove xfs_cred.h
  xfs: remove xfs_globals.h
  xfs: remove xfs_version.h
  xfs: remove xfs_refcache.h
  xfs: fix the xfs_trans_committed
  xfs: remove unused t_callback field in struct xfs_trans
  xfs: fix bogus m_maxagi check in xfs_iget
  xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters
  xfs: do not use xfs_mod_incore_sb for per-cpu counters
  xfs: remove XFS_MOUNT_NO_PERCPU_SB
  xfs: pack xfs_buf structure more tightly
  xfs: convert buffer cache hash to rbtree
  xfs: serialise inode reclaim within an AG
  xfs: batch inode reclaim lookup
  xfs: implement batched inode lookups for AG walking
  xfs: split out inode walk inode grabbing
  xfs: split inode AG walking into separate code for reclaim
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: update comments to reflect that percpu allocations are always zero-filled
  percpu: Optimize __get_cpu_var()
  x86, percpu: Optimize this_cpu_ptr
  percpu: clear memory allocated with the km allocator
  percpu: fix build breakage on s390 and cleanup build configuration tests
  percpu: use percpu allocator on UP too
  percpu: reduce PCPU_MIN_UNIT_SIZE to 32k
  vmalloc: pcpu_get/free_vm_areas() aren't needed on UP

Fixed up trivial conflicts in include/linux/percpu.h

insert sparse annotations to fix following sparse warning.

fs/nilfs2/segment.c:2681:3: warning: context imbalance in 'nilfs_segctor_kill_thread' - unexpected unlock

nilfs_segctor_kill_thread is only called inside sc_state_lock lock.
sparse doesn't detect the context and warn "unexpected unlock".
__acquires/__releases pretend to lock/unlock the sc_state_lock for sparse.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

change nilfs_dat_commit_free and nilfs_inode_cachep static
to fix following warnings

fs/nilfs2/super.c:72:19: warning: symbol 'nilfs_inode_cachep' was not declared. Should it be static?
fs/nilfs2/dat.c:106:6: warning: symbol 'nilfs_dat_commit_free' was not declared. Should it be static?
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it
instead of ns_bdi on the nilfs object and remove ns_bdi.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This allows other projects to carry copies of the header file related
to ABI and disk format (i.e. "nilfs2_fs.h") without it or distributors
having to worry about effects on the project's overall license terms.
It's also desired for switching the license of nilfs library to LGPL.

Jiro SEKIBA pointed out these license issues (Message-ID:
<87tylo7msw.wl%jir@sekiba.com>), and he suggested switching license of
the library and nilfs2_fs.h to GNU Lesser General Public License.  We
take in his suggestion to avoid the license issues.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: linux-nilfs <linux-nilfs@vger.kernel.org>

Nilfs hasn't supported the freeze/thaw feature because it didn't work
due to the peculiar design that multiple super block instances could
be allocated for a device.  This limitation was removed by the patch
"nilfs2: do not allocate multiple super block instances for a device".

So now this adds the freeze/thaw support to nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The current implementation doesn't mount snapshots with checkpoint
numbers larger than INT_MAX since it uses match_int() for parsing
"cp=" mount option.

This uses simple_strtoull() for the conversion to resolve the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This finally removes own inode allocator and destructor functions for
metadata files.  Several routines, nilfs_mdt_new(),
nilfs_mdt_new_common(), nilfs_mdt_clear(), nilfs_mdt_destroy(), and
nilfs_alloc_inode_common() will be gone.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs object holds a back pointer to a writable super block instance
in nilfs->ns_writer, and this became eliminable since sb is now made
per device and all inodes have a valid pointer to it.

This deletes the ns_writer pointer and a reader/writer semaphore
protecting it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This removes a back pointer to nilfs object from nilfs_mdt_info
structure that is attached to metadata files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.

The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.

This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>