- 23 Apr, 2018 13 commits
-
-
David Ahern authored
syzbot reported a suspicious rcu_dereference_check: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x14a/0x153 kernel/locking/lockdep.c:4592 rt6_check_expired+0x38b/0x3e0 net/ipv6/route.c:410 ip6_negative_advice+0x67/0xc0 net/ipv6/route.c:2204 dst_negative_advice include/net/sock.h:1786 [inline] sock_setsockopt+0x138f/0x1fe0 net/core/sock.c:1051 __sys_setsockopt+0x2df/0x390 net/socket.c:1899 SYSC_setsockopt net/socket.c:1914 [inline] SyS_setsockopt+0x34/0x50 net/socket.c:1911 Add rcu locking around call to rt6_check_expired in ip6_negative_advice. Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Reported-by: syzbot+2422c9e35796659d2273@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Denis Bolotin says: ==================== Add configuration information to register dump and debug data The purpose of this patchset is to add configuration information to the debug data collection, which already contains register dump. The first patch (removing the ptt) is essential because it prevents the unnecessary ptt acquirement when calling mcp APIs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Bolotin authored
Configuration information is added to the debug data collection, in addition to register dump. Added qed_dbg_nvm_image() that receives an image type, allocates a buffer and reads the image. The images are saved in the buffers and the dump size is updated. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Bolotin authored
Since nvm images attributes are cached during driver load, acquiring ptt is not needed when calling qed_mcp_get_nvm_image(). Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Move all the core version detection to a common place ("hwif.c") and implement a table which can be used to lookup the correct callbacks for each IP version. This simplifies the initialization flow of each IP version and eases future implementation of new IP versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
There's no benefit in using netif_info et al before the net_device has been registered. We get messages like r8169 0000:03:00.0 (unnamed net_device) (uninitialized): [message] Therefore use dev_info/dev_err instead. As a side effect we don't need parameter dev for function rtl8169_get_mac_version() any longer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yafang Shao authored
With sk_cookie we can identify a socket, that is very helpful for traceing and statistic, i.e. tcp tracepiont and ebpf. So we'd better init it by default for inet socket. When using it, we just need call atomic64_read(&sk->sk_cookie). Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roopa Prabhu says: ==================== fib rules extack support First patch refactors code to move fib rule netlink handling into a common function. This became obvious when adding duplicate extack msgs in add and del paths. Second patch adds extack msgs. v2 - Dropped the ip route get support and selftests from the series to look at the input path some more (as pointed out by ido). Will come back to that next week when i have some time. resending just the extack part for now. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This reduces code duplication in the fib rule add and del paths. Get rid of validate_rulemsg. This became obvious when adding duplicate extack support in fib newrule/delrule error paths. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yafang Shao authored
tcp_rcv_space_adjust is called every time data is copied to user space, introducing a tcp tracepoint for which could show us when the packet is copied to user. When a tcp packet arrives, tcp_rcv_established() will be called and with the existed tracepoint tcp_probe we could get the time when this packet arrives. Then this packet will be copied to user, and tcp_rcv_space_adjust will be called and with this new introduced tracepoint we could get the time when this packet is copied to user. With these two tracepoints, we could figure out whether the user program processes this packet immediately or there's latency. Hence in the printk message, sk_cookie is printed as a key to relate tcp_rcv_space_adjust with tcp_probe. Maybe we could export sockfd in this new tracepoint as well, then we could relate this new tracepoint with epoll/read/recv* tracepoints, and finally that could show us the whole lifespan of this packet. But we could also implement that with pid as these functions are executed in process context. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The conversion of rndis friendly name to utf8 uses a standard kernel routine which is optional in config. Therefore build would fail for some configurations. Resolve by selecting needed library. Fixes: 0fe554a4 ("hv_netvsc: propogate Hyper-V friendly name into interface alias") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Apr, 2018 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts were simple overlapping changes in microchip driver. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== net/ipv6: Another followup to the fib6_info change Last one - for this week. Patches 1, 2 and 7 are more cleanup patches - removing dead code, moving code from a header to near its single caller, and updating function name. Patches 3-5 do some refactoring leading up to patch 6 which fixes a NULL dereference. I have only managed to trigger a panic once, so I can not definitively confirm it addresses the problem but it seems pretty clear that it is a race on removing a 'from' reference on an rt6_info and another path using that 'from' value to do cookie checking. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Dan reported an imbalance in fib6_check on use of f6i and checking whether it is null. Since fib6_check is only called if f6i is non-null, remove the unnecessary check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
When a dst entry is created from a fib entry, the 'from' in rt6_info is set to the fib entry. The 'from' reference is used most notably for cookie checking - making sure stale dst entries are updated if the fib entry is changed. When a fib entry is deleted, the pcpu routes on it are walked releasing the fib6_info reference. This is needed for the fib6_info cleanup to happen and to make sure all device references are released in a timely manner. There is a race window when a FIB entry is deleted and the 'from' on the pcpu route is dropped and the pcpu route hits a cookie check. Handle this race using rcu on from. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Code move only; no functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
A later patch protects 'from' in rt6_info and this simplifies the locking needed by it. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
A later patch protects 'from' in rt6_info and this simplifies the locking needed by it. With the move, the fib6_info_hold for the uncached_rt is no longer needed since the rcu_lock is still held. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
rt6_get_cookie_safe takes a fib6_info and checks the sernum of the node. Update the name to reflect its purpose. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
rt6_clean_expires and rt6_set_expires are no longer used. Removed them. rt6_update_expires has 1 caller in route.c, so move it from the header. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-04-21 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Initial work on BPF Type Format (BTF) is added, which is a meta data format which describes the data types of BPF programs / maps. BTF has its roots from CTF (Compact C-Type format) with a number of changes to it. First use case is to provide a generic pretty print capability for BPF maps inspection, later work will also add BTF to bpftool. pahole support to convert dwarf to BTF will be upstreamed as well (https://github.com/iamkafai/pahole/tree/btf), from Martin. 2) Add a new xdp_bpf_adjust_tail() BPF helper for XDP that allows for changing the data_end pointer. Only shrinking is currently supported which helps for crafting ICMP control messages. Minor changes in drivers have been added where needed so they recalc the packet's length also when data_end was adjusted, from Nikita. 3) Improve bpftool to make it easier to feed hex bytes via cmdline for map operations, from Quentin. 4) Add support for various missing BPF prog types and attach types that have been added to kernel recently but neither to bpftool nor libbpf yet. Doc and bash completion updates have been added as well for bpftool, from Andrey. 5) Proper fix for avoiding to leak info stored in frame data on page reuse for the two bpf_xdp_adjust_{head,meta} helpers by disallowing to move the pointers into struct xdp_frame area, from Jesper. 6) Follow-up compile fix from BTF in order to include stdbool.h in libbpf, from Björn. 7) Few fixes in BPF sample code, that is, a typo on the netdevice in a comment and fixup proper dump of XDP action code in the tracepoint exception, from Wang and Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Apr, 2018 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal fixes from Eduardo Valentin: "A couple of fixes for the thermal subsystem" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: dt-bindings: thermal: Remove "cooling-{min|max}-level" properties dt-bindings: thermal: remove no longer needed samsung thermal properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes: - sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode - renesas_sdhi_internal_dmac: Avoid data corruption by limiting DMA RX" * tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs mmc: sdhci-pci: Only do AMD tuning for HS200
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD fixes from Shaohua Li: "Three small fixes for MD: - md-cluster fix for faulty device from Guoqing - writehint fix for writebehind IO for raid1 from Mariusz - a live lock fix for interrupted recovery from Yufen" * tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid1: copy write hint from master bio to behind bio md/raid1: exit sync request if MD_RECOVERY_INTR is set md-cluster: don't update recovery_offset for faulty device
-
David Howells authored
In do_mount() when the MS_* flags are being converted to MNT_* flags, MS_RDONLY got accidentally convered to SB_RDONLY. Undo this change. Fixes: e462ec50 ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
AFS server records get removed from the net->fs_servers tree when they're deleted, but not from the net->fs_addresses{4,6} lists, which can lead to an oops in afs_find_server() when a server record has been removed, for instance during rmmod. Fix this by deleting the record from the by-address lists before posting it for RCU destruction. The reason this hasn't been noticed before is that the fileserver keeps probing the local cache manager, thereby keeping the service record alive, so the oops would only happen when a fileserver eventually gets bored and stops pinging or if the module gets rmmod'd and a call comes in from the fileserver during the window between the server records being destroyed and the socket being closed. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c ... Workqueue: kafsd afs_process_async_call [kafs] RIP: 0010:afs_find_server+0x271/0x36f [kafs] ... Call Trace: afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs] afs_deliver_to_call+0x1ee/0x5e8 [kafs] afs_process_async_call+0x5b/0xd0 [kafs] process_one_work+0x2c2/0x504 worker_thread+0x1d4/0x2ac kthread+0x11f/0x127 ret_from_fork+0x24/0x30 Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Assorted fixes. Some of that is only a matter with fault injection (broken handling of small allocation failure in various mount-related places), but the last one is a root-triggerable stack overflow, and combined with userns it gets really nasty ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Don't leak MNT_INTERNAL away from internal mounts mm,vmscan: Allow preallocating memory for register_shrinker(). rpc_pipefs: fix double-dput() orangefs_kill_sb(): deal with allocation failures jffs2_kill_sb(): deal with failed allocations hypfs_kill_super(): deal with failed allocations
-
Linus Torvalds authored
Merge tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Minor cleanups and a bug fix to completely ignore unencrypted filenames in the lower filesystem when filename encryption is enabled at the eCryptfs layer" * tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: don't pass up plaintext names when using filename encryption ecryptfs: fix spelling mistake: "cadidate" -> "candidate" ecryptfs: lookup: Don't check if mount_crypt_stat is NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
- isofs memory leak fix - two fsnotify fixes of event mask handling - udf fix of UTF-16 handling - couple other smaller cleanups * tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix leak of UTF-16 surrogates into encoded strings fs: ext2: Adding new return type vm_fault_t isofs: fix potential memory leak in mount option parsing MAINTAINERS: add an entry for FSNOTIFY infrastructure fsnotify: fix typo in a comment about mark->g_list fsnotify: fix ignore mask logic in send_to_group() isofs compress: Remove VLA usage fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init fanotify: fix logic of events on child
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - suspend/resume handling fix for Raydium I2C-connected touchscreen from Aaron Ma - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong Skomra - battery level reporting fix on BT-connected mice from Dmitry Torokhov - hidraw race condition fix from Rodrigo Rivas Costa * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix inverted return value from i2c_hid_command() HID: i2c-hid: Fix resume issue on Raydium touchscreen device HID: wacom: bluetooth: send exit report for recent Bluetooth devices HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device HID: input: fix battery level reporting on BT mice
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatching fix from Jiri Kosina: "Shadow variable API list_head initialization fix from Petr Mladek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Allow to call a custom callback when freeing shadow variables livepatch: Initialize shadow variables safely by a custom callback
-
Paolo Abeni authored
Currently, the tun driver, in absence of an eBPF steering program, always compute the rxhash in its rx path, even when such value is later unused due to additional checks ( This changeset moves the all the related checks just before the __skb_get_hash_symmetric(), so that the latter is no more computed when unneeded. Also replace an unneeded RCU section with rcu_access_pointer(). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghuram Chary J authored
In order to dump lan78xx family registers using ethtool, add support at lan78xx driver level. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Phil Elwell says: ==================== lan78xx: Read configuration from Device Tree The Microchip LAN78XX family of devices are Ethernet controllers with a USB interface. Despite being discoverable devices it can be useful to be able to configure them from Device Tree, particularly in low-cost applications without an EEPROM or programmed OTP. This patch set adds support for reading the MAC address and LED modes from Device Tree. v4: - Rename nodes in bindings doc. v3: - Move LED setting into PHY driver. v2: - Use eth_platform_get_mac_address. - Support up to 4 LEDs, and move LED mode constants into dt-bindings header. - Improve bindings document. - Remove EEE support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Elwell authored
The Microchip LAN78XX family of devices are Ethernet controllers with a USB interface. Despite being discoverable devices it can be useful to be able to configure them from Device Tree, particularly in low-cost applications without an EEPROM or programmed OTP. Document the supported properties in a bindings file. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Elwell authored
Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Elwell authored
There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-