In acpi_processor_get_info(), ACPI processor info is initialized including
ID, namely CPU index. Currently, on a UP system running an SMP kerenl with
no LAPIC in the MADT, cpu0_initialized is checked to decide whether or not
the CPU has been initialized.

However, this check may not be sufficient for kdump kernels. Most of time
only 1 CPU is supported because of known problems in kdump kernels. So say
the multiple CPUs are present in the boot kernel and a crash happens on
one specific CPU, say CPU2. Then it jumps into the kdump kernel with
"nr_cpus=1" in the command line. In this situation, the kdump kernel
will reuse the ACPI resources from the crashed kernel directly. That
means all LAPIC instances are enabled in the MADT while only one CPU is
in use.  In the kdump kernel, x86_cpu_to_apicid contains the correct APIC
ID and it's related to the CPU ID. If cpu0_initialized is checked only, 0
will be used as the CPU index instead of that APIC ID, which is not
correct.

In addition to checking cpu0_initialized, check acpi_lapic. If acpi_lapic
is 0, then no LAPIC is available from the MADT and the system should be
treated as a UP one without a LAPIC (that is, assign 0 to the CPU index).
Otherwise, use the original (valid) CPU index.
Signed-off-by: Baoquan He <bhe@redhat.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This variable was defined and assigned in x86, is used to indicate
whether LAPIC exists in MADT. Now introduce it into ia64 to help
make correct judgment when get information for ACPI processor later.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-cpufreq:
  intel_pstate: remove setting P state to MAX on init
  intel_pstate: Set turbo VID for BayTrail

* acpi-video:
  ACPI / video: correct DMI tag for Dell Inspiron 7520
  ACPI / video: Add use_native_backlight quirks for more systems

* acpi-blacklist:
  ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
  ACPI: blacklist win8 OSI for Dell Inspiron 7737

* acpi-ac:
  ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"

* acpi-proc:
  ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig
  ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
  ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"

* acpica:
  ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
  ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().

* acpi-tpm:
  ACPI / TPM: Fix resume regression on Chromebooks

* acpi-processor:
  ACPI / processor: do not mark present at boot but not onlined CPU as onlined

Setting the P state of the core to max at init time is a hold over
from early implementation of intel_pstate where intel_pstate disabled
cpufreq and loaded VERY early in the boot sequence.  This was to
ensure that intel_pstate did not affect boot time. This in not needed
now that intel_pstate is a cpufreq driver.

Removing this covers the case where a CPU has gone through a manual
CPU offline/online cycle and the P state is set to MAX on init and the
CPU immediately goes idle.  Due to HW coordination the P state request
on the idle CPU will drag all cores to MAX P state until the load is
reevaluated when to core goes non-idle.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report.  This patch reverts Linux to the original behavior.

Fixes: 0249ed24 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The DMI tag used to identify Dell Inspiron 7520 should be product name
instead of product version.

Fixes: 0e9f81d3 (ACPI / video: Add systems that should favour native backlight interface)
Reported-and-tested-by: Téo Mazars <teomazars@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=909552
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A documentation update exposed that there is a separate set of VID
values that must be used in the turbo/boost P state range.  Add
enumerating and setting the correct VID for P states in the turbo
range.

Cc: v3.13+ <stable@vger.kernel.org> # v3.13+
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Chromebooks (at least Acer C720 and Pixel) implement an ACPI object
for TPM, but don't implement the _DSM method to support PPI.  As
a result, the TPM driver fails to load on those machines after
commit 1569a4c4 (ACPI / TPM: detect PPI features by checking
availability of _DSM functions) which causes them to fail to
resume from system suspend, becuase they require the TPM hardware
to be put into the right state during resume and the TPM driver
is necessary for that.

Fix the problem by making tpm_add_ppi() return 0 when tpm_ppi_handle
is still NULL after walking the ACPI namespace in search for the PPI
_DSM, which allows the TPM driver to load and operate the hardware
(during system resume in particular), but avoid creating the PPI
sysfs group in that case.

This change is based on a prototype patch from Jiang Liu.

Fixes: 1569a4c4 (ACPI / TPM: detect PPI features by checking availability of _DSM functions)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021Reported-by: James Duley <jagduley@gmail.com>
Reported-by: Phillip Dixon <phil@dixon.gen.nz>
Tested-by: Brandon Casey <drafnel@gmail.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Do not tell people in the Kconfig help when exactly we are going to
remove the deprecated ACPI interfaces in /proc, because, honestly,
we don't know.  We will remove them when they are not used any more.

In particular, do not tell them that the interfaces will be removed
in a kernel release that already happened long ago.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull x86 fixes from Peter Anvin:
 "A somewhat unpleasantly large collection of small fixes.  The big ones
  are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'.  It
  was using __init functions with predictably suboptimal results.

  Another key fix is a build fix which would produce output that simply
  would not decompress correctly in some configuration, due to the
  existing Makefiles picking up an unfortunate local label and mistaking
  it for the global symbol _end.

  Additional fixes include the handling of 64-bit numbers when setting
  the vdso data page (a latent bug which became manifest when i386
  started exporting a vdso with time functions), a fix to the new MSR
  manipulation accessors which would cause features to not get properly
  unblocked, a build fix for 32-bit userland, and a few new platform
  quirks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
  x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
  x86: Fix typo preventing msr_set/clear_bit from having an effect
  x86/intel: Add quirk to disable HPET for the Baytrail platform
  x86/hpet: Make boot_hpet_disable extern
  x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
  x86/reboot: Add reboot quirk for Certec BPC600
  asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
  asmlinkage, x86: Add explicit __visible to arch/x86/*
  asmlinkage: Revert "lto: Make asmlinkage __visible"
  x86, build: Don't get confused by local symbols
  x86/efi: earlyprintk=efi,keep fix

With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit
systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall()
may lose upper bits or, worse, add them since compiler will do this:
	(u64)(tk->wall_to_monotonic.tv_nsec << tk->shift)
instead of
	((u64)tk->wall_to_monotonic.tv_nsec << tk->shift)

So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up
with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in
the subsequent 'while' loop.

We need an explicit cast.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.comAcked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

The spuriously added semicolon didn't have any effect because the
macro isn't currently in use.

c0a639adSigned-off-by: Andres Freund <andres@anarazel.de>
Link: http://lkml.kernel.org/r/1399598957-7011-3-git-send-email-andres@anarazel.de
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Due to a typo the msr accessor function introduced in
22085a66 didn't have any lasting
effects because they accidentally wrote the old value back.

After c0a639ad this at the very least
this causes cpuid limits not to be lifted on some cpus leading to
missing capabilities for those.
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: http://lkml.kernel.org/r/1399598957-7011-2-git-send-email-andres@anarazel.de
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Pull xfs fixes from Dave Chinner:
 "The main fix is adding support for default ACLs on O_TMPFILE opened
  inodes to bring XFS into line with other filesystems.  Metadata CRCs
  are now also considered well enough tested to be fully supported, so
  we're removing the shouty warnings issued at mount time for
  filesystems with that format.  And there's transaction block
  reservation overrun fix.

  Summary:
   - fix a remote attribute size calculation bug that leads to a
     transaction overrun
   - add default ACLs to O_TMPFILE files
   - Remove the EXPERIMENTAL tag from filesystems with metadata CRC
     support"

* tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs:
  xfs: remote attribute overwrite causes transaction overrun
  xfs: initialize default acls for ->tmpfile()
  xfs: fully support v5 format filesystems

Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This contains two fixes.

  The first is a long standing bug that causes bogus data to show up in
  the refcnt field of the module_refcnt tracepoint.  It was introduced
  by a merge conflict resolution back in 2.6.35-rc days.

  The result should be 'refcnt = incs - decs', but instead it did
  'refcnt = incs + decs'.

  The second fix is to a bug that was introduced in this merge window
  that allowed for a tracepoint funcs pointer to be used after it was
  freed.  Moving the location of where the probes are released solved
  the problem"

* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracepoint: Fix use of tracepoint funcs after rcu free
  trace: module: Maintain a valid user count

Pull input subsystem fixes from Dmitry Torokhov:
 "Just a few fixups to various drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - fix touchpad initialization on Gigabyte U2442
  Input: tca8418 - fix loading this driver as a module from a device tree
  Input: bma150 - extend chip detection for bma180
  Input: atkbd - fix keyboard not working on some LG laptops
  Input: synaptics - add min/max quirk for ThinkPad Edge E431

Pull sound fixes from Takashi Iwai:
 "A bunch of small fixes for USB-audio and HD-audio, where most of them
  are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI
  offline state fix, and a couple of device-specific quirks"

* tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - hdmi: Set converter channel count even without sink
  ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
  ALSA: usb-audio: Fix deadlocks at resuming
  ALSA: usb-audio: Save mixer status only once at suspend
  ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined
  ALSA: hda - add headset mic detect quirk for a Dell laptop

Pull mmc/rtsx revert from Lee Jones.

* tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"

Commit de7b2973 "tracepoint: Use struct pointer instead of name hash
for reg/unreg tracepoints" introduces a use after free by calling
release_probes on the old struct tracepoint array before the newly
allocated array is published with rcu_assign_pointer. There is a race
window where tracepoints (RCU readers) can perform a
"use-after-grace-period-after-free", which shows up as a GPF in
stress-tests.

Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com
Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.comReported-by: Sasha Levin <sasha.levin@oracle.com>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Dave Jones <davej@redhat.com>
Fixes: de7b2973 "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints"
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.

Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.

Use 'count = incs - decs' to compute the user count.

Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.comAcked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 2.6.35
Fixes: c1ab9cab "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

acpi_processor_add() assumes that present at boot CPUs
are always onlined, it is not so if a CPU failed to become
onlined. As result acpi_processor_add() will mark such CPU
device as onlined in sysfs and following attempts to
online/offline it using /sys/device/system/cpu/cpuX/online
attribute will fail.

Do not poke into device internals in acpi_processor_add()
and touch "struct device { .offline }" attribute, since
for CPUs onlined at boot it's set by:
  topology_init() -> arch_register_cpu() -> register_cpu()
before ACPI device tree is parsed, and for hotplugged
CPUs it's set when userspace onlines CPU via sysfs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit c42deffd.

commit <mmc: rtsx: add support for pre_req and post_req> did use
mutex_unlock() in tasklet, but mutex_unlock() can't be used in
tasklet(atomic context). The driver needs to use mutex to avoid
concurrency, so we can't use tasklet here, the patch need to be
removed.

The spinlock host->lock and pcr->lock may deadlock, one way to solve
the deadlock is remove host->lock in sd_isr_done_transfer(), but if
using workqueue the we can avoid using the spinlock and also avoid
the problem.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

HPET on current Baytrail platform has accuracy problem to be
used as reliable clocksource/clockevent, so add a early quirk to
disable it.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-2-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

HPET on some platform has accuracy problem. Making
"boot_hpet_disable" extern so that we can runtime disable
the HPET timer by using quirk to check the platform.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-1-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull MTD fix from Brian Norris:
 "A single update for Keystone SoC's, whose NAND controller does not
  support subpage programming"

* tag 'for-linus-20140507' of git://git.infradead.org/linux-mtd:
  mtd: davinci-nand: disable subpage write for keystone-nand

Pull HID fixes from Jiri Kosina:

 - fix a small bug in computation of report size, which might cause some
   devices (Atmel touchpad found on the Samsung Ativ 9) to reject
   reports with otherwise valid contents

 - a few device-ID specific quirks/additions piggy-backing on top of it

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas
  HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S
  HID: core: fix computation of the report size
  HID: multitouch: add support of EliteGroup 05D8 panels

Pull radeon mullins support from Dave Airlie:
 "This is support for the new AMD mullins APU, it pretty much just adds
  support to the driver in the all the right places, and is pretty low
  risk wrt other GPUs"

Oh well.  I guess it ends up fitting under "support new hardware" for
merging late.

* 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: add pci ids for Mullins
  drm/radeon: add Mullins VCE support
  drm/radeon: modesetting updates for Mullins.
  drm/radeon: dpm updates for KV/KB
  drm/radeon: add Mullins dpm support.
  drm/radeon: add Mullins UVD support.
  drm/radeon: update cik init for Mullins.
  drm/radeon: add Mullins chip family

Pull drm fixes from Dave Airlie:
 "radeon, i915 and nouveau fixes, all fixes for regressions or black
  screens, or possible oopses"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: lower the ref * post PLL maximum
  drm/radeon: check that we have a clock before PLL setup
  drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
  drm/radeon: Fix num_banks calculation for SI
  agp: info leak in agpioc_info_wrap()
  drm/gm107/gr: bump attrib cb size quite a bit
  drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
  drm/nouveau/bios: fix shadowing from PROM on big-endian systems
  drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
  drm/radeon/dp: check for errors in dpcd reads
  drm/radeon: avoid high jitter with small frac divs
  drm/radeon: check buffer relocation offset
  drm/radeon: use pflip irq on R600+ v2
  drm/radeon/uvd: use lower clocks on old UVD to boot v2
  drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
  drm/i915: Sanitize the enable_ppgtt module option once
  drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()

Revert commit cc8ef527 (ACPI / AC: convert ACPI ac driver to
platform bus) that is reported to break thermal management on
MacBook Air 2013 with ArchLinux.

Fixes: cc8ef527 (ACPI / AC: convert ACPI ac driver to platform bus)
References: https://bugzilla.kernel.org/show_bug.cgi?id=71711
Cc: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Without this this EEE PC exports a non working WMI interface, with this it
exports a working "good old" eeepc_laptop interface, fixing brightness control
not working as well as rfkill being stuck in a permanent wireless blocked
state.

This is not an ideal way to fix this, but various attempts to fix this
otherwise have failed, see:

References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181
Reported-and-tested-by: lou.cardone@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

With win8 capabiltiy, the machine will boot itself immediately after
shutdown command has executed.

Work around this issue by disabling win8 capcability.  This workaround
also makes wireless hotkey work.
Signed-off-by: Edward Lin <yidi.lin@canonical.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If you are using a 64-bit kernel with 32-bit userland, then
scripts/gcc-x86_64-has-stack-protector.sh invokes 32-bit gcc
with -mcmodel=kernel, which produces:

<stdin>:1:0: error: code model 'kernel' not supported in the 32 bit mode

and trips the "broken compiler" test at arch/x86/Makefile:120.

There are several places a fix is possible, but the following seems
cleanest.  (But it's minimal; it would also be possible to factor
out a bunch of stuff from the two branches of the if.)
Signed-off-by: George Spelvin <linux@horizon.com>
Link: http://lkml.kernel.org/r/20140507210552.7581.qmail@ns.horizon.com
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Certec BPC600 needs reboot=pci to actually reboot.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1399446114-2147-1-git-send-email-christian.gmeiner@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Add Mullins chips support.

* 'mullins' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: add pci ids for Mullins
  drm/radeon: add Mullins VCE support
  drm/radeon: modesetting updates for Mullins.
  drm/radeon: dpm updates for KV/KB
  drm/radeon: add Mullins dpm support.
  drm/radeon: add Mullins UVD support.
  drm/radeon: update cik init for Mullins.
  drm/radeon: add Mullins chip family

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

nouveau fixes.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/gm107/gr: bump attrib cb size quite a bit
  drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
  drm/nouveau/bios: fix shadowing from PROM on big-endian systems
  drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi

Some more i915 fixes. There's still some DP issues we are looking into,
but wanted to get these moving.

* tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
  drm/i915: Sanitize the enable_ppgtt module option once
  drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()