Skip to content

L
linux
Switch branch/tag
  1. 30 Nov, 2016 21 commits
  3. 28 Nov, 2016 19 commits
    • Michael Holzheu's avatar
      bpf/samples: Fix PT_REGS_IP on s390x and use it · 2dbb4c05
      Michael Holzheu authored 
      The files "sampleip_kern.c" and "trace_event_kern.c" directly access
"ctx->regs.ip" which is not available on s390x. Fix this and use the
PT_REGS_IP() macro instead.

Also fix the macro for s390x and use "psw.addr" from "pt_regs".
Reported-by: default avatarZvonko Kosic <zvonko.kosic@de.ibm.com>
Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2dbb4c05
    • Nikita Yushchenko's avatar
      net: dsa: fix unbalanced dsa_switch_tree reference counting · 7a99cd6e
      Nikita Yushchenko authored 
      _dsa_register_switch() gets a dsa_switch_tree object either via
dsa_get_dst() or via dsa_add_dst(). Former path does not increase kref
in returned object (resulting into caller not owning a reference),
while later path does create a new object (resulting into caller owning
a reference).

The rest of _dsa_register_switch() assumes that it owns a reference, and
calls dsa_put_dst().

This causes a memory breakage if first switch in the tree initialized
successfully, but second failed to initialize. In particular, freed
dsa_swith_tree object is left referenced by switch that was initialized,
and later access to sysfs attributes of that switch cause OOPS.

To fix, need to add kref_get() call to dsa_get_dst().

Fixes: 83c0afae ("net: dsa: Add new binding implementation")
Signed-off-by: default avatarNikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a99cd6e
    • David Ahern's avatar
      net: handle no dst on skb in icmp6_send · 79dc7e3f
      David Ahern authored 
      Andrey reported the following while fuzzing the kernel with syzkaller:

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff8800666d4200 task.stack: ffff880067348000
RIP: 0010:[<ffffffff833617ec>]  [<ffffffff833617ec>]
icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451
RSP: 0018:ffff88006734f2c0  EFLAGS: 00010206
RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018
RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003
R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000
R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0
FS:  00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0
Stack:
 ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460
 ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046
 ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000
Call Trace:
 [<ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557
 [<     inline     >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88
 [<ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157
 [<ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663
 [<ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191
 ...

icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both
cases the dst->dev should be preferred for determining the L3 domain
if the dst has been set on the skb. Fallback to the skb->dev if it has
not. This covers the case reported here where icmp6_send is invoked on
Rx before the route lookup.

Fixes: 5d41ce29 ("net: icmp6_send should use dst dev to determine L3 domain")
Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79dc7e3f
    • David S. Miller's avatar
      Merge branch 'mlx4-fixes' · 2fc8d112
      David S. Miller authored 
      Tariq Toukan says:

====================
mlx4 bug fixes for 4.9

This patchset includes 2 bug fixes:
* In patch 1 we revert the commit that avoids invoking unregister_netdev
in shutdown flow, as it introduces netdev presence issues where
it can be accessed unsafely by ndo operations during the flow.
* Patch 2 is a simple fix for a variable uninitialization issue.

Series generated against net commit:
6998cc6e tipc: resolve connection flow control compatibility problem
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2fc8d112
    • Jack Morgenstein's avatar
      net/mlx4: Fix uninitialized fields in rule when adding promiscuous mode to... · 44b911e7
      Jack Morgenstein authored 
      net/mlx4: Fix uninitialized fields in rule when adding promiscuous mode to device managed flow steering

In procedure mlx4_flow_steer_promisc_add(), several fields
were left uninitialized in the rule structure.
Correctly initialize these fields.

Fixes: 592e49dd ("net/mlx4: Implement promiscuous mode with device managed flow-steering")
Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      44b911e7
    • Tariq Toukan's avatar
      Revert "net/mlx4_en: Avoid unregister_netdev at shutdown flow" · b4353708
      Tariq Toukan authored 
      This reverts commit 9d769311.

Using unregister_netdev at shutdown flow prevents calling
the netdev's ndos or trying to access its freed resources.

This fixes crashes like the following:
 Call Trace:
  [<ffffffff81587a6e>] dev_get_phys_port_id+0x1e/0x30
  [<ffffffff815a36ce>] rtnl_fill_ifinfo+0x4be/0xff0
  [<ffffffff815a53f3>] rtmsg_ifinfo_build_skb+0x73/0xe0
  [<ffffffff815a5476>] rtmsg_ifinfo.part.27+0x16/0x50
  [<ffffffff815a54c8>] rtmsg_ifinfo+0x18/0x20
  [<ffffffff8158a6c6>] netdev_state_change+0x46/0x50
  [<ffffffff815a5e78>] linkwatch_do_dev+0x38/0x50
  [<ffffffff815a6165>] __linkwatch_run_queue+0xf5/0x170
  [<ffffffff815a6205>] linkwatch_event+0x25/0x30
  [<ffffffff81099a82>] process_one_work+0x152/0x400
  [<ffffffff8109a325>] worker_thread+0x125/0x4b0
  [<ffffffff8109a200>] ? rescuer_thread+0x350/0x350
  [<ffffffff8109fc6a>] kthread+0xca/0xe0
  [<ffffffff8109fba0>] ? kthread_park+0x60/0x60
  [<ffffffff816a1285>] ret_from_fork+0x25/0x30

Fixes: 9d769311 ("net/mlx4_en: Avoid unregister_netdev at shutdown flow")
Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
Reported-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: default avatarSteve Wise <swise@opengridcomputing.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4353708
    • Roi Dayan's avatar
      net/sched: Export tc_tunnel_key so its UAPI accessible · faa1fa54
      Roi Dayan authored 
      Export tc_tunnel_key so it can be used from user space.
Signed-off-by: default avatarRoi Dayan <roid@mellanox.com>
Reviewed-by: default avatarAmir Vadai <amir@vadai.me>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      faa1fa54
    • Borislav Petkov's avatar
      amd-xgbe: Fix unused suspend handlers build warning · 91eefaab
      Borislav Petkov authored 
      Fix:

  drivers/net/ethernet/amd/xgbe/xgbe-main.c:835:12: warning: ‘xgbe_suspend’ defined
    but not used [-Wunused-function]
  drivers/net/ethernet/amd/xgbe/xgbe-main.c:855:12: warning: ‘xgbe_resume’ defined
    but not used [-Wunused-function]

I see it during randconfig builds here.
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: netdev@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91eefaab
    • Julian Wollrath's avatar
      tcp: Set DEFAULT_TCP_CONG to bbr if DEFAULT_BBR is set · 4df21dfc
      Julian Wollrath authored 
      Signed-off-by: default avatarJulian Wollrath <jwollrath@web.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4df21dfc
    • David S. Miller's avatar
      Merge branch 'fix-RTL8211F-TX-delay-handling' · 68c1644f
      David S. Miller authored 
      Martin Blumenstingl says:

====================
net: phy: realtek: fix RTL8211F TX-delay handling

The RTL8211F PHY driver currently enables the TX-delay only when the
phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there
are three RGMII variations of the phy-mode which explicitly request the
PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII
specifies that the PHY should disable the RX and/or TX delays.

Additionally to the RTL8211F PHY driver change this contains a small
update to the phy-mode documentation to clarify the purpose of the
RGMII phy-modes.
While this may not be perfect yet it's at least a start. Please feel
free to drop this patch from this series and send an improved version
yourself.

These patches are the results of recent discussions, see [0]

[0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      68c1644f
    • Martin Blumenstingl's avatar
      net: phy: realtek: fix enabling of the TX-delay for RTL8211F · e3230494
      Martin Blumenstingl authored 
      The old logic always enabled the TX-delay when the phy-mode was set to
PHY_INTERFACE_MODE_RGMII. There are dedicated phy-modes which tell the
PHY driver to enable the RX and/or TX delays:
- PHY_INTERFACE_MODE_RGMII should disable the RX and TX delay in the
  PHY (if required, the MAC should add the delays in this case)
- PHY_INTERFACE_MODE_RGMII_ID should enable RX and TX delay in the PHY
- PHY_INTERFACE_MODE_RGMII_TXID should enable the TX delay in the PHY
- PHY_INTERFACE_MODE_RGMII_RXID should enable the RX delay in the PHY
  (currently not supported by RTL8211F)

With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID
and PHY_INTERFACE_MODE_RGMII_TXID.
Additionally we now explicity disable the TX-delay, which seems to be
enabled automatically after a hard-reset of the PHY (by triggering it's
reset pin) to get a consistent state (as defined by the phy-mode).

This fixes a compatibility problem with some SoCs where the TX-delay was
also added by the MAC. With the TX-delay being applied twice the TX
clock was off and TX traffic was broken or very slow (<10Mbit/s) on
1000Mbit/s links.
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3230494
    • Martin Blumenstingl's avatar
      Documentation: devicetree: clarify usage of the RGMII phy-modes · e5f3a4a5
      Martin Blumenstingl authored 
      RGMII requires special RX and/or TX delays depending on the actual
hardware circuit/wiring. These delays can be added by the MAC, the PHY
or the designer of the circuit (the latter means that no delay has to
be added by PHY or MAC).
There are 4 RGMII phy-modes used describe where a delay should be
applied:
- rgmii: the RX and TX delays are either added by the MAC (where the
  exact delay is typically configurable, and can be turned off when no
  extra delay is needed) or not needed at all (because the hardware
  wiring adds the delay already). The PHY should neither add the RX nor
  TX delay in this case.
- rgmii-rxid: configures the PHY to enable the RX delay. The MAC should
  not add the RX delay in this case.
- rgmii-txid: configures the PHY to enable the TX delay. The MAC should
  not add the TX delay in this case.
- rgmii-id: combines rgmii-rxid and rgmii-txid and thus configures the
  PHY to enable the RX and TX delays. The MAC should neither add the RX
  nor TX delay in this case.

Document these cases in the ethernet.txt documentation to make it clear
when to use each mode.
If applied incorrectly one might end up with MAC and PHY both enabling
for example the TX delay, which breaks ethernet TX traffic on 1000Mbit/s
links.
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5f3a4a5
    • Daniel Borkmann's avatar
      net, sched: respect rcu grace period on cls destruction · d9363774
      Daniel Borkmann authored 
      Roi reported a crash in flower where tp->root was NULL in ->classify()
callbacks. Reason is that in ->destroy() tp->root is set to NULL via
RCU_INIT_POINTER(). It's problematic for some of the classifiers, because
this doesn't respect RCU grace period for them, and as a result, still
outstanding readers from tc_classify() will try to blindly dereference
a NULL tp->root.

The tp->root object is strictly private to the classifier implementation
and holds internal data the core such as tc_ctl_tfilter() doesn't know
about. Within some classifiers, such as cls_bpf, cls_basic, etc, tp->root
is only checked for NULL in ->get() callback, but nowhere else. This is
misleading and seemed to be copied from old classifier code that was not
cleaned up properly. For example, d3fa76ee ("[NET_SCHED]: cls_basic:
fix NULL pointer dereference") moved tp->root initialization into ->init()
routine, where before it was part of ->change(), so ->get() had to deal
with tp->root being NULL back then, so that was indeed a valid case, after
d3fa76ee, not really anymore. We used to set tp->root to NULL long
ago in ->destroy(), see 47a1a1d4 ("pkt_sched: remove unnecessary xchg()
in packet classifiers"); but the NULLifying was reintroduced with the
RCUification, but it's not correct for every classifier implementation.

In the cases that are fixed here with one exception of cls_cgroup, tp->root
object is allocated and initialized inside ->init() callback, which is always
performed at a point in time after we allocate a new tp, which means tp and
thus tp->root was not globally visible in the tp chain yet (see tc_ctl_tfilter()).
Also, on destruction tp->root is strictly kfree_rcu()'ed in ->destroy()
handler, same for the tp which is kfree_rcu()'ed right when we return
from ->destroy() in tcf_destroy(). This means, the head object's lifetime
for such classifiers is always tied to the tp lifetime. The RCU callback
invocation for the two kfree_rcu() could be out of order, but that's fine
since both are independent.

Dropping the RCU_INIT_POINTER(tp->root, NULL) for these classifiers here
means that 1) we don't need a useless NULL check in fast-path and, 2) that
outstanding readers of that tp in tc_classify() can still execute under
respect with RCU grace period as it is actually expected.

Things that haven't been touched here: cls_fw and cls_route. They each
handle tp->root being NULL in ->classify() path for historic reasons, so
their ->destroy() implementation can stay as is. If someone actually
cares, they could get cleaned up at some point to avoid the test in fast
path. cls_u32 doesn't set tp->root to NULL. For cls_rsvp, I just added a
!head should anyone actually be using/testing it, so it at least aligns with
cls_fw and cls_route. For cls_flower we additionally need to defer rhashtable
destruction (to a sleepable context) after RCU grace period as concurrent
readers might still access it. (Note that in this case we need to hold module
reference to keep work callback address intact, since we only wait on module
unload for all call_rcu()s to finish.)

This fixes one race to bring RCU grace period guarantees back. Next step
as worked on by Cong however is to fix 1e052be6 ("net_sched: destroy
proto tp when all filters are gone") to get the order of unlinking the tp
in tc_ctl_tfilter() for the RTM_DELTFILTER case right by moving
RCU_INIT_POINTER() before tcf_destroy() and let the notification for
removal be done through the prior ->delete() callback. Both are independant
issues. Once we have that right, we can then clean tp->root up for a number
of classifiers by not making them RCU pointers, which requires a new callback
(->uninit) that is triggered from tp's RCU callback, where we just kfree()
tp->root from there.

Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf")
Fixes: 9888faef ("net: sched: cls_basic use RCU")
Fixes: 70da9f0b ("net: sched: cls_flow use RCU")
Fixes: 77b9900e ("tc: introduce Flower classifier")
Fixes: bf3994d2 ("net/sched: introduce Match-all classifier")
Fixes: 952313bd ("net: sched: cls_cgroup use RCU")
Reported-by: default avatarRoi Dayan <roid@mellanox.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Roi Dayan <roid@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Acked-by: default avatarJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9363774
    • Jon Paul Maloy's avatar
      tipc: fix link statistics counter errors · 95901122
      Jon Paul Maloy authored 
      In commit e4bf4f76 ("tipc: simplify packet sequence number
handling") we changed the internal representation of the packet
sequence number counters from u32 to u16, reflecting what is really
sent over the wire.

Since then some link statistics counters have been displaying incorrect
values, partially because the counters meant to be used as sequence
number snapshots are now used as direct counters, stored as u32, and
partially because some counter updates are just missing in the code.

In this commit we correct this in two ways. First, we base the
displayed packet sent/received values on direct counters instead
of as previously a calculated difference between current sequence
number and a snapshot. Second, we add the missing updates of the
counters.

This change is compatible with the current netlink API, and requires
no changes to the user space tools.
Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      95901122
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 8eb4adf6
      David S. Miller authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2016-11-25

1) Fix a refcount leak in vti6.
   From Nicolas Dichtel.

2) Fix a wrong if statement in xfrm_sk_policy_lookup.
   From Florian Westphal.

3) The flowcache watermarks are per cpu. Take this into
   account when comparing to the threshold where we
   refusing new allocations. From Miroslav Urbanek.

Please pull or let me know if there are problems.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8eb4adf6
    • Gao Feng's avatar
      driver: macvtap: Unregister netdev rx_handler if macvtap_newlink fails · e824265d
      Gao Feng authored 
      The macvtap_newlink registers the netdev rx_handler firstly, but it
does not unregister the handler if macvlan_common_newlink failed.
Signed-off-by: default avatarGao Feng <fgao@ikuai8.com>
Acked-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e824265d
    • David S. Miller's avatar
      Merge branch 'more-phydev-leaks' · a1cad5ee
      David S. Miller authored 
      Johan Hovold says:

====================
net: fix phydev reference leaks

This series fixes a number of phydev reference leaks (and one of_node
leak) due to failure to put the reference taken by of_phy_find_device().

Note that I did not try to fix drivers/net/phy/xilinx_gmii2rgmii.c which
still leaks a reference.

Against net but should apply just as fine to net-next.

v2:
 - use put_device() instead of phy_dev_free() to put the references
   taken in net/dsa (patch 1/4).
 - add four new patches fixing similar leaks
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1cad5ee
    • Johan Hovold's avatar
      net: qcom/emac: fix of_node and phydev leaks · 6ffe1c4c
      Johan Hovold authored 
      Make sure to drop the reference taken by of_phy_find_device() during
probe on probe errors and on driver unbind.

Also drop the of_node reference taken by of_parse_phandle() in the same
path.

Fixes: b9b17deb ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ffe1c4c
    • Johan Hovold's avatar
      net: fsl/fman: fix fixed-link-phydev reference leak · cb1f3410
      Johan Hovold authored 
      Make sure to drop the reference taken by of_phy_find_device() when
looking up a fixed-link phydev during probe.

Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support")
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb1f3410
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7