Cleanup removed the file, but Makefile was overlooked. Purge there too.

Fixes: 4b483ed0 ('ARM: ux500: cut some platform data')
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull "Broadcom maintainers changes for 4.11" from Florian Fainelli:

This pull request contains Broadcom MAINTAINERS entries updates for 4.11:

- Eric updates the git repository for the BCM283x development

* tag 'arm-soc/for-4.11/maintainers' of http://github.com/Broadcom/stblinux:
  MAINTAINERS: Update for the current location of the bcm2835 tree.

Merge tag 'sunxi-core-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Pull "Allwinner core changes for 4.11" from Maxime Ripard:

Some patches to support two new SoCs: the H2+ and the V3s.

* tag 'sunxi-core-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  arm: sunxi: add support for V3s SoC
  ARM: sunxi: add support for H2+ SoC

Pull "mvebu soc for 4.11 (part 2)" from Gregory CLEMENT:

SoC part of the support for the for Marvell switches with integrated
CPUs based on Armada XP: the SMP support is slightly different.

* tag 'mvebu-soc-4.11-2' of git://git.infradead.org/linux-mvebu:
  arm: mvebu: support for SMP on 98DX3336 SoC

The TS-72xx/73xx boards have a CPLD watchdog which is configured to
reset the board after 8 seconds, if the kernel is large enough that this
takes about this time to decompress the kernel, we will encounter a
spurious reboot.

Do not pull ts72xx.h, but instead locally define what we need to disable
the watchdog.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This platform data is revoked: the drivers are getting the DMA
configuration from the device tree, it has been done like that
since the DMA support was merged and this data has not been used
since. The remaining auxdata is also unused.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I've been maintaining the bcm2835 branches here for a year or so.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Compared to the armada-xp the 98DX3336 uses different registers to set
the boot address for the secondary CPU so a new enable-method is needed.
This will only work if the machine definition doesn't define an overall
smp_ops because there is not currently a way of overriding this from the
device tree if it is set in the machine definition.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Merge tag 'samsung-soc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc update for v4.11, second round:
1. Remove mach code for Exynos4415 as a continuation of removal
   of this SoC.
2. Remove obsolete property from the bindings documentation.

* tag 'samsung-soc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  ARM: EXYNOS: Remove Exynos4415 arch code (SoC not supported anymore)
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX cleanup for 4.11:
 - Remove unused flexcan and esdhc device definitions for i.MX25.
 - A series from Fabio to remove camera device initialization code from
   i.MX platform support, since the corresponding media driver has been
   deprecated and removed from kernel tree.

* tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: mach-mx27_3ds: Remove camera support
  ARM: mach-pcm037: Remove camera support
  ARM: mach-mx35_3ds: Remove camera support
  ARM: mx31moboard-smartbot: Remove camera support
  ARM: mx31moboard-marxbot: Remove camera support
  ARM: mach-mx31_3ds: Remove camera support
  ARM: imx: remove unused device definitions
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu soc for 4.11 (part 1)

Cleanup up on dove pmu and mv78x00 pci

* tag 'mvebu-soc-4.11-1' of git://git.infradead.org/linux-mvebu:
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

ARM: tegra: Core SoC changes for v4.11-rc1

This contains a single cleanup patch for the placement of the __initdata
annotation, as suggested by checkpatch.

* tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: paz00: Fix __initdata placement
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Second Round of Renesas ARM Based SoC Updates for v4.11

* Add more register documentation to R-Car Gen2 PM

* tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: Add more register documentation
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the pxa changes for v4.11 cycle.

This cycle is a minor fixes one, covering :
 - build fixes from Arnd, mainly include related
 - transfer of maintainance of Motorala phone to Robert

* tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux:
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: pxa: include linux/leds.h
  ARM: pxa: ezx: fix a910 camera data
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: mach-hisi: Hisilicon SoC updates for 4.11

- Drop the declaration of the unimplemented hip01_cpu_die

* tag 'hisi-armv7-soc-for-4.11' of git://github.com/hisilicon/linux-hisi:
  arm: hisi: drop extern hip01_cpu_die
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omaps for v4.11 merge window. This adds support
for keeping the interconnect target module active for uart if
earlycon is specified. And we're adding Aaro Koskinen as a
co-maintainer for omap1 to make sure things stay working for
omap1. The other changes are mostly clean-up of old legacy code:

- Remove unused omap_display_init()
- Make omapdss_find_dss_of_node() function static
- Add support for earlycon
- Tidy up omap1 usb logging output with pr_cont
- Make omap_otg_init() static
- Delete redundant CPU class checks for omap1
- Remove unused mpurate cmdline option that has not done
  anything for past 1.5 years at least

* tag 'omap-for-v4.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  MAINTAINERS: Add Aaro Koskinen as TI omap1 SoC co-maintainer
  ARM: OMAP1: USB: delete redundant CPU class checks
  ARM: OMAP1: USB: make omap_otg_init() static
  ARM: OMAP1: USB: tidy up logging output
  ARM: OMAP2+: Make the omapdss_find_dss_of_node() function static
  ARM: OMAP2+: Remove unused omap_display_init() function
Signed-off-by: Olof Johansson <olof@lixom.net>

The samsung,power-domain property is obsolete since commit 0da65870
("ARM: dts: convert to generic power domain bindings for exynos DT").
Replace it with generic one.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Rob Herring <robh@kernel.org>

Declare reset_control_ops as const as they are only stored in the ops
field of a reset_controller_dev structure. This field is of type const
struct reset_control_ops *, so reset_control_ops structures having this
property can be declared as const.
Done using Coccinelle:

@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct reset_control_ops i@p={...};

@ok1@
identifier r1.i;
position p;
struct reset_controller_dev x;
@@
x.ops=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct reset_control_ops i;

File size before: drivers/soc/dove/pmu.o
   text	   data	    bss	    dec	    hex	filename
   2447	    112	     16	   2575	    a0f	drivers/soc/dove/pmu.o

File size after: drivers/soc/dove/pmu.o
   text	   data	    bss	    dec	    hex	filename
   2479	     80	     16	   2575	    a0f	drivers/soc/dove/pmu.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

gcc-7.0 reports a potential array overflow:

arch/arm/mach-mv78xx0/pcie.c: In function 'mv78xx0_pcie_preinit':
arch/arm/mach-mv78xx0/pcie.c:81:4: error: output may be truncated before the last format character [-Werror=format-truncation=]

I haven't checked if this can actually happen, but making the
array one 32-bit word longer addresses the warning and makes
it completely safe.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Neither Daniel, Harald or myself are looking into this anymore.
Robert thankfully agreed to handle the maintenance from now on.
Also remove the outdated entries for website, git tree and
mailing list.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Placement of attributes, such as __initdata, is standardized through the
checkpatch script. Fix up this instance to make checkpatch happy.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The 'mpurate' option, historically used for specifying an initial
MPU rate at boot, no longer has any effect due to the supporting
code being removed as it was 'wrong and dangerous' [1].

This patch removes the remaining dead code associated with the
__setup macros to avoid confusion and reduce bloat.

[1] https://patchwork.kernel.org/patch/5954631/Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Allwinner V3s is a low-end single-core Cortex-A7 SoC, with 64MB
integrated DRAM, and several peripherals.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Hwmod core tries to reset and idles each IP that is registered with hwmod.
In case of earlycon, that specific uart IP cannot be reset or keep it in
idle state else earlycon hangs once hwmod resets that uart IP. So add support
to not reset uart that is being used as earlycon only if CONFIG_SERIAL_EARLYCON
is enabled.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Since the hip01 doesn't support cpu hotplug now, and doesn't implement
the hip01_cpu_die function, drop the declaration.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'aspeed-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/soc

Apseed SoC updates for 4.11

One commit that selects the newly upstreamed pinctrl driver for all
SoCs.

* tag 'aspeed-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: aspeed: Select pinctrl drivers
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc

SoC for 4.11:

 - small cleanup

* tag 'at91-ab-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: pm: remove useless extern definition
Signed-off-by: Olof Johansson <olof@lixom.net>

Support for Exynos4415 is going away because there are no internal nor
external users.

Since commit 46dcf0ff ("ARM: dts: exynos: Remove exynos4415.dtsi"),
the platform cannot be instantiated so remove also the mach code.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kukjin Kim <kgene@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

When the header is not included implicitly, we get a build failure:

arch/arm/mach-pxa/idp.c:205:22: error: field 'cdev' has incomplete type
  struct led_classdev     cdev;

This adds an explicit #include.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

The camera_supply_dummy_device definition is shared between a780 and a910,
but only provided when the first is enabled and fails to build for a
configuration with only a910:

arch/arm/mach-pxa/ezx.c:1097:3: error: 'camera_supply_dummy_device' undeclared here (not in a function)

This moves the definition into its own section.

Fixes: 6c1b417a ("ARM: pxa: ezx: use the new pxa_camera platform_data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Merge tag 'samsung-soc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc update for v4.11. Mostly cleanups:
1. Removal of unused platform data in S3C24XX and S3C64xx as follow up of
   conversion to new DMA channel request API.
2. Adding const and __ro_after_init to various data in Samsung platforms.

* tag 'samsung-soc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c64xx: Constify wake_irqs
  ARM: s3c24xx: Constify wake_irqs
  ARM: SAMSUNG: Constify array of wake irqs passed to samsung_sync_wakemask
  ARM: s3c64xx: Annotate external clock frequencies __ro_after_init
  ARM: s3c24xx: Constify few integer tables
  ARM: EXYNOS: Annotate iomem and pm_data pointers __ro_after_init
  ARM: EXYNOS: Constify list of retention registers
  ARM: s3c24xx: Drop unused struct s3c_audio_pdata entries
  ARM: s3c64xx: Drop initialization of unused struct s3c_audio_pdata fields
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dev-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

Some two collected patches simplifying some Ux500
stuff.

* tag 'ux500-dev-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: remove duplicated include from cpu-db8500.c
  ARM: ux500: simplify secondary boot
Signed-off-by: Olof Johansson <olof@lixom.net>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Inline the wakeup_secondary() static function, and keep the
backupram remapping around: it is reused when resuming from
suspend so no point in remapping it every time.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

at91_ramc_base is local to pm.c, remove its definition in pm.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'renesas-soc-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.11

* Allow booting secondary CPU cores in debug mode

* tag 'renesas-soc-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: Remove unused rcar_gen2_read_mode_pins()
  ARM: shmobile: r8a7791: Allow booting secondary CPU cores in debug mode
  ARM: shmobile: apmu: Allow booting secondary CPU cores in debug mode
  ARM: shmobile: apmu: Add debug resource reset for secondary CPU boot
  ARM: shmobile: apmu: Add more register documentation
Signed-off-by: Olof Johansson <olof@lixom.net>