- 22 Jun, 2015 25 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: A couple more updates for v4.2 These were sitting on my laptop.
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Further updates for v4.2 There's a bunch of additional updates and fixes that came in since my orignal pull request here, including DT support for rt5645 and fairly large serieses of cleanups and improvements to tas2552 and rcar. # gpg: Signature made Mon 22 Jun 2015 10:24:48 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Mark Brown authored
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
-
Mark Brown authored
-
Takashi Iwai authored
Merge tag 'asoc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Further updates for v4.2 There's a bunch of additional updates and fixes that came in since my orignal pull request here, including DT support for rt5645 and fairly large serieses of cleanups and improvements to tas2552 and rcar.
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', 'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' and 'asoc/topic/omap' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
-
Mark Brown authored
-
- 20 Jun, 2015 1 commit
-
-
Matt Ranostay authored
Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Jun, 2015 2 commits
-
-
Richard Fitzgerald authored
The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branches 'topic/adsp' and 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
-
- 17 Jun, 2015 5 commits
-
-
Axel Lin authored
Fix trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Vinod Koul authored
A typical io ops use simple io accessors which can be common for most drivers, so provide a default ops which will be used if driver doesn't provide one Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vinod Koul authored
In HDA extended bus the HDA link objects are created when multilink capabilities are parsed. We need a routine which free up these link objects for a bus. So add snd_hdac_link_free_all routine Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vinod Koul authored
HDAC extended core should create streams for an extended bus and also free up those on cleanup. So introduce snd_hdac_ext_stream_init_all and snd_hdac_stream_free_all routines Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kuninori Morimoto authored
'04700027("ASoC: rsrc-card: cleanup for DPCM")' cleanuped rsrc-card driver, but then, unused ret was left. Below warning happen without this patch ${LINUX}/sound/soc/sh/rcar/rsrc-card.c: In function 'rsrc_card_startup': ${LINUX}/sound/soc/sh/rcar/rsrc-card.c:78:6: warning: unused variable \ 'ret' [-Wunused-variable] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 16 Jun, 2015 7 commits
-
-
Vinod Koul authored
Since this is common option for HDA driver to specfiy pre-allocated buffer, we should make this option availble to all HDA driver by moving this to HDA core Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Koro Chen authored
This is the DPCM based machine driver with rt5650 and rt5676 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Koro Chen authored
This is the DPCM based machine driver with MAX98090 Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Koro Chen authored
This is the DPCM based platform driver of AFE (Audio Front End) unit. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many path if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. rsnd_mod_to_io() is no longer needed. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch checks module working status via io instead of mod Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths if it supports MIXer. In such case, mod <-> io is no longer 1:1 relationship. This patch removes rsnd_mod_to_io() from snd_kcontrol and related function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-