Optimize sector division: If the number of stripes is a power of two,
we can do shift and mask instead of division.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move sector to stripe translation into a function.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Have the error target respond to a discard request with a hard -EIO
rather than fail the request with -EOPNOTSUPP.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Enable discard support for the delay target.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Have the zero target silently drop a discard rather than fail the
request with -EOPNOTSUPP.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Use new dm_target_offset() macro to avoid most references to ti->begin
in dm targets.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Split max_io_len_target_boundary out of max_io_len so that the discard
support can make use of it without duplicating max_io_len code.

Avoiding max_io_len's split_io logic enables DM's discard support to
submit the entire discard request to a target.  But discards must still
be split on target boundaries.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Rename __flush_target to __issue_target_request now that it is used to
issue both flush and discard requests.

Introduce __issue_target_requests as a convenient wrapper to
__issue_target_request 'num_flush_requests' or 'num_discard_requests'
times per target.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Allow discards to be passed through to linear mappings if at least one
underlying device supports it.  Discards will be forwarded only to
devices that support them.

A target that supports discards should set num_discard_requests to
indicate how many times each discard request must be submitted to it.

Verify table's underlying devices support discards prior to setting the
associated DM device as capable of discards (via QUEUE_FLAG_DISCARD).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Allocate cipher strings indpendently of struct crypt_config and move
cipher parsing and allocation into a separate function to prepare for
supporting the cryptoapi format e.g. "xts(aes)".

No functional change in this patch.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Use just one label and reuse common destructor for crypt target.

Parse remaining argv arguments in logic order.

Also do not ignore error values from IV init and set key functions.

No functional change in this patch except changed return codes
based on above.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add devname:mapper/control and MAPPER_CTRL_MINOR module alias
to support dm-mod module autoloading.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

'target_request_nr' is a more generic name that reflects the fact that
it will be used for both flush and discard support.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This change unifies the various checks and finalization that occurs on a
table prior to use.  By doing so, it allows table construction without
traversing the dm-ioctl interface.
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Implement merge method for the snapshot origin to improve read
performance.

Without merge method, dm asks the upper layers to submit smallest possible
bios --- one page. Submitting such small bios impacts performance negatively
when reading or writing the origin device.

Without this patch, CPU consumption when reading the origin on lvm on md-raid0
was 6 to 12%, with this patch, it drops to 1 to 4%.

Note: in my testing, it actually degraded performance in some settings, I
traced it to Maxtor disks having problems with > 512-sector requests.
Reducing the number of sectors to /sys/block/sd*/queue/max_sectors_kb to
256 fixed the read performance. I think we don't have to care about weird
disks that actually degrade performance because of large requests being
sent to them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Change bio-based mapped devices no longer to have a fully initialized
request_queue (request_fn, elevator, etc).  This means bio-based DM
devices no longer register elevator sysfs attributes ('iosched/' tree
or 'scheduler' other than "none").

In contrast, a request-based DM device will continue to have a full
request_queue and will register elevator sysfs attributes.  Therefore
a user can determine a DM device's type by checking if elevator sysfs
attributes exist.

First allocate a minimalist request_queue structure for a DM device
(needed for both bio and request-based DM).

Initialization of a full request_queue is deferred until it is known
that the DM device is request-based, at the end of the table load
sequence.

Factor DM device's request_queue initialization:
- common to both request-based and bio-based into dm_init_md_queue().
- specific to request-based into dm_init_request_based_queue().

The md->type_lock mutex is used to protect md->queue, in addition to
md->type, during table_load().

A DM device's first table_load will establish the immutable md->type.
But md->queue initialization, based on md->type, may fail at that time
(because blk_init_allocated_queue cannot allocate memory).  Therefore
any subsequent table_load must (re)try dm_setup_md_queue independently of
establishing md->type.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Determine whether a mapped device is bio-based or request-based when
loading its first (inactive) table and don't allow that to be changed
later.

This patch performs different device initialisation in each of the two
cases.  (We don't think it's necessary to add code to support changing
between the two types.)

Allowed md->type transitions:
  DM_TYPE_NONE to DM_TYPE_BIO_BASED
  DM_TYPE_NONE to DM_TYPE_REQUEST_BASED

We now prevent table_load from replacing the inactive table with a
conflicting type of table even after an explicit table_clear.

Introduce 'type_lock' into the struct mapped_device to protect md->type
and to prepare for the next patch that will change the queue
initialization and allocate memory while md->type_lock is held.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

 drivers/md/dm-ioctl.c    |   15 +++++++++++++++
 drivers/md/dm.c          |   37 ++++++++++++++++++++++++++++++-------
 drivers/md/dm.h          |    5 +++++
 include/linux/dm-ioctl.h |    4 ++--
 4 files changed, 52 insertions(+), 9 deletions(-)

When processing barriers, skip the second flush if processing the bio
failed with -EOPNOTSUPP.  This can happen with discard+barrier requests.
If the device doesn't support discard, there would be two useless
SYNCHRONIZE CACHE commands.  The first dm_flush cannot be so easily
optimized out, so we leave it there.

Previously, -EOPNOTSUPP could be received in dec_pending only with empty
barriers and we ignored that error, assuming the device not supporting
cache flushes has cache always consistent.  With the addition of discard
barriers, this -EOPNOTSUPP can also be generated by discards and we
must record it in md->barrier_error for process_barrier.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch fixes hard-coded value for the size of a chunk that includes
disk header for persistent snapshot. It should be changed to existing
macro NUM_SNAPSHOT_HDR_CHUNKS instead of using hard-coded value 1.
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Use kstrdup when the goal of an allocation is copy a string into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to;
expression flag,E1,E2;
statement S;
@@

-  to = kmalloc(strlen(from) + 1,flag);
+  to = kstrdup(from, flag);
   ... when != \(from = E1 \| to = E1 \)
   if (to==NULL || ...) S
   ... when != \(from = E2 \| to = E2 \)
-  strcpy(to, from);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

The dm control device does not implement read/write, so it has no use for
seeking.  Using no_llseek prevents falling back to default_llseek, which
requires the BKL.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch separates the device deletion code from dm_put()
to make sure the deletion happens in the process context.

By this patch, device deletion always occurs in an ioctl (process)
context and dm_put() can be called in interrupt context.
As a result, the request-based dm's bad dm_put() usage pointed out
by Mikulas below disappears.
    http://marc.info/?l=dm-devel&m=126699981019735&w=2

Without this patch, I confirmed there is a case to crash the system:
    dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt())

Some more backgrounds and details:
In request-based dm, a device opener can remove a mapped_device
while the last request is still completing, because bios in the last
request complete first and then the device opener can close and remove
the mapped_device before the last request completes:
  CPU0                                          CPU1
  =================================================================
  <<INTERRUPT>>
  blk_end_request_all(clone_rq)
    blk_update_request(clone_rq)
      bio_endio(clone_bio) == end_clone_bio
        blk_update_request(orig_rq)
          bio_endio(orig_bio)
                                                <<I/O completed>>
                                                dm_blk_close()
                                                dev_remove()
                                                  dm_put(md)
                                                    <<Free md>>
   blk_finish_request(clone_rq)
     ....
     dm_end_request(clone_rq)
       free_rq_clone(clone_rq)
       blk_end_request_all(orig_rq)
       rq_completed(md)

So request-based dm used dm_get()/dm_put() to hold md for each I/O
until its request completion handling is fully done.
However, the final dm_put() can call the device deletion code which
must not be run in interrupt context and may cause kernel panic.

To solve the problem, this patch moves the device deletion code,
dm_destroy(), to predetermined places that is actually deleting
the mapped_device in ioctl (process) context, and changes dm_put()
just to decrement the reference count of the mapped_device.
By this change, dm_put() can be used in any context and the symmetric
model below is introduced:
    dm_create():  create a mapped_device
    dm_destroy(): destroy a mapped_device
    dm_get():     increment the reference count of a mapped_device
    dm_put():     decrement the reference count of a mapped_device

dm_destroy() waits for all references of the mapped_device to disappear,
then deletes the mapped_device.

dm_destroy() uses active waiting with msleep(1), since deleting
the mapped_device isn't performance-critical task.
And since at this point, nobody opens the mapped_device and no new
reference will be taken, the pending counts are just for racing
completing activity and will eventually decrease to zero.

For the unlikely case of the forced module unload, dm_destroy_immediate(),
which doesn't wait and forcibly deletes the mapped_device, is also
introduced and used in dm_hash_remove_all().  Otherwise, "rmmod -f"
may be stuck and never return.
And now, because the mapped_device is deleted at this point, subsequent
accesses to the mapped_device may cause NULL pointer references.

Cc: stable@kernel.org
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch changes dm_hash_remove_all() to release _hash_lock when
removing a device.  After removing the device, dm_hash_remove_all()
takes _hash_lock and searches the hash from scratch again.

This patch is a preparation for the next patch, which changes device
deletion code to wait for md reference to be 0.  Without this patch,
the wait in the next patch may cause AB-BA deadlock:
  CPU0                                CPU1
  -----------------------------------------------------------------------
  dm_hash_remove_all()
    down_write(_hash_lock)
                                      table_status()
                                        md = find_device()
                                               dm_get(md)
                                                 <increment md->holders>
                                        dm_get_live_or_inactive_table()
                                          dm_get_inactive_table()
                                            down_write(_hash_lock)
    <in the md deletion code>
      <wait for md->holders to be 0>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch prevents access to mapped_device which is being deleted.

Currently, even after a mapped_device has been removed from the hash,
it could be accessed through idr_find() using minor number.
That could cause a race and NULL pointer reference below:
  CPU0                          CPU1
  ------------------------------------------------------------------
  dev_remove(param)
    down_write(_hash_lock)
    dm_lock_for_deletion(md)
      spin_lock(_minor_lock)
      set_bit(DMF_DELETING)
      spin_unlock(_minor_lock)
    __hash_remove(hc)
    up_write(_hash_lock)
                                dev_status(param)
                                  md = find_device(param)
                                         down_read(_hash_lock)
                                         __find_device_hash_cell(param)
                                           dm_get_md(param->dev)
                                             md = dm_find_md(dev)
                                                    spin_lock(_minor_lock)
                                                    md = idr_find(MINOR(dev))
                                                    spin_unlock(_minor_lock)
    dm_put(md)
      free_dev(md)
                                             dm_get(md)
                                         up_read(_hash_lock)
                                  __dev_status(md, param)
                                  dm_put(md)

This patch fixes such problems.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

All the dm ioctls that generate uevents set the DM_UEVENT_GENERATED flag so
that userspace knows whether or not to wait for a uevent to be processed
before continuing,

The dm rename ioctl sets this flag but was not structured to return it
to userspace.  This patch restructures the rename ioctl processing to
behave like the other ioctls that return data and so fix this.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

__dev_status() cannot fail so make it void and simplify callers.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Remove useless __dev_status call while processing an ioctl that sets up
device geometry and target message.  The data is not returned to
userspace so there is no point collecting it and in the case of
target_message it is collected before processing the message so if it
did return it might be stale.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Validate chunk size against both origin and snapshot sector size

Don't allow chunk size smaller than either origin or snapshot logical
sector size. Reading or writing data not aligned to sector size is not
allowed and causes immediate errors.

This requires us to open the origin before initialising the
exception store and to export dm_snap_origin.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Iterate both origin and snapshot devices

iterate_devices method should call the callback for all the devices where
the bio may be remapped. Thus, snapshot_iterate_devices should call the callback
for both snapshot and origin underlying devices because it remaps some bios
to the snapshot and some to the origin.

snapshot_iterate_devices called the callback only for the origin device.
This led to badly calculated device limits if snapshot and origin were placed
on different types of disks.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

multipath_ctr() forgets to return an error after detecting
missing path parameters.  Fix this.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  isofs: Fix lseek() to position beyond 4 GB
  vfs: remove unused MNT_STRICTATIME
  vfs: show unreachable paths in getcwd and proc
  vfs: only add " (deleted)" where necessary
  vfs: add prepend_path() helper
  vfs: __d_path: dont prepend the name of the root dentry
  ia64: perfmon: add d_dname method
  vfs: add helpers to get root and pwd
  cachefiles: use path_get instead of lone dget
  fs/sysv/super.c: add support for non-PDP11 v7 filesystems
  V7: Adjust sanity checks for some volumes
  Add v7 alias
  v9fs: fixup for inode_setattr being removed

Manual merge to take Al's version of the fs/sysv/super.c file: it merged
cleanly, but Al had removed an unnecessary header include, so his side
was better.

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: fix checkpatch.pl warnings
  Squashfs: fix filename typo
  Squashfs: update Kconfig and documentation for LZO
  Squashfs: fix block size use in LZO decompressor
  Squashfs: Add LZO compression support
  squashfs: fix filename in header comment
  Squashfs: Make XATTR config name consistent with other file systems
  squashfs: fix compiler inline warning

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: Fix groups code when num_devices is not divisible by group_width
  exofs: Remove useless optimization
  exofs: exofs_file_fsync and exofs_file_flush correctness
  exofs: Remove superfluous dependency on buffer_head and writeback

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  ceph: generalize mon requests, add pool op support
  ceph: only queue async writeback on cap revocation if there is dirty data
  ceph: do not ignore osd_idle_ttl mount option
  ceph: constify dentry_operations
  ceph: whitespace cleanup
  ceph: add flock/fcntl lock support
  ceph: define on-wire types, constants for file locking support
  ceph: add CEPH_FEATURE_FLOCK to the supported feature bits
  ceph: support v2 reconnect encoding
  ceph: support v2 client_caps encoding
  ceph: move AES iv definition to shared header
  ceph: fix decoding of pool snap info
  ceph: make ->sync_fs not wait if wait==0
  ceph: warn on missing snap realm
  ceph: print useful error message when crush rule not found
  ceph: use %pU to print uuid (fsid)
  ceph: sync header defs with server code
  ceph: clean up header guards
  ceph: strip misleading/obsolete version, feature info
  ceph: specify supported features in super.h
  ...

* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  video: msm: Fix section mismatch in mddi.c.
  drivers: video: msm: drop some unused variables

* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
  IXP4xx: Fix LL debugging on little-endian CPU.
  IXP4xx: Fix sparse warnings in I/O primitives.
  IXP4xx: Make mdio_bus struct static in the Ethernet driver.
  IXP4xx: Fix ixp4xx_crypto little-endian operation.
  IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals.
  ixp4xx/vulcan: add PCI support
  ixp4xx: base support for Arcom Vulcan

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits)
  ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
  ARM: 6324/1: cam60: move cam60_spi_devices to .init.data
  ARM: 6322/1: imx/pca100: Fix name of spi platform data
  ARM: 6321/1: fix syntax error in main Kconfig file
  ARM: 6297/1: move U300 timer to dynamic clock lookup
  ARM: 6296/1: clock U300 intcon and timer properly
  ARM: 6295/1: fix U300 apb_pclk split
  ARM: 6306/1: fix inverted MMC card detect in U300
  ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID
  ARM: 6294/1: etm: do a dummy read from OSSRR during initialization
  ARM: 6292/1: coresight: add ETM management registers
  ARM: 6288/1: ftrace: document mcount formats
  ARM: 6287/1: ftrace: clean up mcount assembly indentation
  ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
  ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE
  ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h>
  ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3
  ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig
  ARM: S5PV210: Override FIMC driver name on Aquila board
  ARM: S5PC100: enable FIMC on SMDKC100
  ...

Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to
different subsystem 'setname' calls, and trivial port types in
include/linux/serial_core.h

Fix checkstack error:

lib/decompress_bunzip2.c: In function `get_next_block':
lib/decompress_bunzip2.c:511: warning: the frame size of 1932 bytes is larger than 1024 bytes

byteCount, symToByte, and mtfSymbol cannot be declared static or allocated
dynamically so place them in the bunzip_data struct.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add four examples to the kernel sample directory.

It shows how to handle:
- a byte stream fifo
- a integer type fifo
- a dynamic record sized fifo
- the fifo DMA functions

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simply replace the whole kfifo.c and kfifo.h files with the new generic
version and fix the kerneldoc API template file.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>