- 22 Jun, 2019 40 commits
-
-
Nikola Cornij authored
[why] There are ASICs that have fewer DSC engines than pipes, which makes DSC a resource that should be used only if required. [how] Acquire DSC HW resource if required by stream and release when not required anymore. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
[WHY] system crash when initialize dwb current linux driver does not support dwb. disable this feature for now. [HOW] set num_dwb = 0 to disable dwb for now Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
[WHY] linux upstream already has interrupt vupdate for freesync in dcn10. dcn20 interrupt shares the same source code as dcn10. but dcn20 interrupt translator does not add vupdate interrupt. this cause index of vupdate aarray be negative which causes crash. [HOW] add vupdate into dc interrupt transltor Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nikola Cornij authored
[why] DSC resource has to be acquired before it can be used and simply copying a reference to it is very likely to cause problems when accessing DSC. [how] Set DSC resource pointer to NULL to mark it as unused after primary pipe resources were copied to the secondary ODM pipe. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tyler DiBattista authored
[Why] Some nightly tests are failing since the new value for fclk is a bit too low. Also, a new test for the maximum downscale case was needed. [How] Updated the default value for fclk to be 1.2GHz. Signed-off-by: Tyler DiBattista <tyler.dibattista@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] when an update programming sequence requires both front end and back end pipe to be updated synchronously, a global update lock needs to be set to ensure that we don't get a frame with only front end update but not the back end update. [how] setup global lock parameters on enable_stream_timing. enable global lock when pipe_control_lock_global is called. disable global lock when pipe_control_lock is called. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yongqiang Sun authored
[Why] Some register fields are not needed. [How] remove them Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Joshua Aberback authored
[Why] We used this change to investigate the performance of bandwidth validation, it will be useful to have if we need to investigate further. [How] We use performance counter tick numbers to profile performance, they live at dc->debug.bw_val_profile (set .enable in debugger to turn on measuring). Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Joshua Aberback authored
We can split validation into three parts: getting voltage level, getting watermarks, and rq/dlg calculations. The voltage level is enough to answer the question "do we support this state", and the rest of it is to determine what hardware programming is needed to support the state. Most of the calls to validate_bandwidth only care about the first part, so we added an early return in that case Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
[Why] display_mode_vba is for DCN2 and up. When building for upstream (DCN1 enabled only), there will be a build error, since display_mode_vba.c/h is stripped out. Note that building DCN1 only with internal dal-dev is still fine, since display_mode_vba.h is not stripped out internally - only in upstream. The make directives therefore stll work, and so will any #include's. [How] Since subsequent generations require DCN2 enabled anyways, guard the makefile directive for display_mode_vba.o with DCN2. Guard any includes with DCN2. In addition, guard the entire contents of display_mode_vba.h with DCN2, to simulate the file being stripped out in upstream. A forward declaration for 'struct display_mode_lib' also needs to be added in display_mode_lib.h. Previously, display_mode_vba.h contained the forward declaration, and display_mode_lib.h in turn included it. This won't work if mode_vba.h is stripped out, requring mode_lib.h to do so itself. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
[Why] Usage of this enum is DSC-only. [How] Guard it with CONFIG_DRM_AMD_DC_DSC_SUPPORT. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Vitaly Prosyak authored
[Why & How] The follow up change Improve some naming for fields and structs Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Charlene Liu authored
[Why] Can not turn on two displays at the same time with the asic having only one DSC. DC_DSC_RESOURCE allocation failed. [Solution] Only add_dsc if the timing is dsc capable based on diag_dc and num_dsc Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Ilya Bakoulin authored
[Why] If voltage level > 0, DCFCLK and SOCCLK could be 0 during DML calculations, which ended up causing an assert. [How] Initialize dcfclk_mhz and socclk_mhz values according to the voltage level. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yongqiang Sun authored
Added some regs and exposed some functions for future use Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Vitaly Prosyak authored
Move flags from color_gamma.h to mod_shared.h and add more options and setting structures Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nikola Cornij authored
[why] DSC spec requires this Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nikola Cornij authored
[why] On at least some of the devices (e.g. Realtek scaler) we get a black screen if 1/16th precision is used. [how] Work around it by reducing precision to 1/8th for N4:2:2 and 4:2:0 color formats. This is a safe workaround and would have a very mild impact on the quality. The issue is still to be root-caused and fixed correctly. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] Global optic double buffer lock is currently disabled due to incorrect programming sequence that affects non global lock. [how] Isolate global lock programming sequence out of non global lock programming sequence, so it can be enabled without affecting non global lock. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nikola Cornij authored
[why] This is now done in the original link bandwidth calculation and DSC must not do this anymore. [how] Remove the line of code that should have been removed when transition to correctly applying FEC overhead was made. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tony Cheng authored
code restructure. Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
We shouldnt need overhead on top of dppclk when setting fclk. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
Remove dc_dsc hack for MST policy Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] Clean up some dsc legacy functions that are no longer needed. [how] remove two dsc functions in dc_dsc, use dc_bandwidth_in_kbps_from_timing instead of calc_required_bandwidth_for_timing. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Joshua Aberback authored
[Why] dcn20_apply_ctx_for_surface can be called with 0 planes, which means we should blank the display. In this case when we get down to dcn20_setup_gsl_group_as_lock, pipe_ctx->plane_state is NULL, but we don't check for it. However, this function is only called by dcn20_pipe_control_lock, and in that function we alraedy have a local for the immediate flip status, which is what we care about in the plane state. [How] - pass in immediate flip status as parameter Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
Currently dsc is validated not taking the image width limitation into mind. This change addresses that, but due to previous design being limited to non odm dsc validation additional sequence changes are made. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aidan Wood authored
[Why] u clk set request was being sent in units of mts, when it needed to be in units of Mhz [How] add a division by 16 to convert from mts to Mhz Signed-off-by: Aidan Wood <Aidan.Wood@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aidan Wood authored
[Why] If num_states == 0 we did update_bound_box which doesn't updated any max clocks if num_states == 0, therefore we need to do cap_soc_clocks instead, also SMU cannot set DCF clock to a higher than or equal to freq than SOC clock [How] Add a num_states != 0 check for update_bounding_box to be run, and after we run get_maximum_sustainable_clocks we now check if the reported max value of DCF is higher than SOC and if necessary set it to 1000 (becomes 1 after division by 1000) lower than SOC Signed-off-by: Aidan Wood <Aidan.Wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nikola Cornij authored
[why] Currently link bandwidth is calculated in various places using the same multi-step formula. Doing this in one common place makes sure the same formula will indeed be applied to all link bandwidth calculations. It also makes it possible to apply link-setting-specific adjustments that affect effective link bandwidth. [how] Replace all implementations of link bandwidth calculation with a call to a function. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Vitaly Prosyak authored
[Why & How] When TM is enabled with 3dlut, we apply conversion to dcip3 in gamut remap matrix, if source area less than dcip3. If it is bigger, we remap to bt2020. The added flags will be used to facilitate this logic. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
Currently dcn2+ validation will unconditionally print a failure reason before validation completes. This change categorizes the failure reason as a warning log and only prints at the end of validation resolving false positives. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bob Yang authored
[Description] swath_bytes_horz_wc should be 256/64/64 for 2160p 32bpp surface Signed-off-by: Bob Yang <Bob.Yang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
[Why] dcn*_disable_plane() doesn't unlock the pipe anymore, making the extra lock unnecessary. In addition - during full plane updates - all necessary pipes should be locked/unlocked together when modifying hubp to avoid tearing in pipesplit setups. [How] Remove redundant locks, and add function to lock all pipes. If an interdependent pipe update is required, lock down all pipes. Otherwise, lock only the top pipe for the updated pipe tree. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
A previous fix was done for DCN1 that needed to be ported to DCN2: commit 60c677534e73 ("drm/amd/display: Disconnect mpcc when changing tg") Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Hawking Zhang authored
Enable DSC (display stream compression) by default. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
not needed for bring up. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
[why] we meet a bug when program dsc register even dsc mode is not enabled. disable dsc config for now. we will re-visit this issue. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
[todo] need find caller bug. tempooariy fix Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
hersen wu authored
[WHY] dcn20 enable usb-c dp ALT mode in dmcu. There is bug when enable abm feature which cause system crash. dal team will debug this bug later. [HOW] disable dcn abm feature for dcn20. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Eric Bernstein authored
* Pull duplicate audio_clock_info struct to stream_encoder.h * Generalize sec_gsp7* to sec_gsp_pps* * Expose enc1 and enc2 stream encoder audio funcs Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-