1. 10 Apr, 2010 5 commits
  2. 24 Mar, 2010 2 commits
    • Stefan Richter's avatar
      firewire: core: align driver match with modalias · fe43d6d9
      Stefan Richter authored
      The driver match strategy was:
        - Match vendor/model/specifier/version of the unit directory.
        - If that was a miss, match vendor from the root directory and
          model/specifier/version of the unit directory.
      
      This was inconsistent with how the modalias string was constructed
      until recently (take vendor/model from root directory and specifier/
      version from unit directory).  It was also inconsistent with how it is
      done since the parent commit:
        - Use vendor/model/specifier/version of the unit directory if possible,
        - fall back to one or more of vendor/model/specifier/version from the
          root directory depending on which ones are not present at the unit
          directory.
      
      Fix this inconsistency by sharing the ROM scanner function between
      modalias printer function and driver match function.
      Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
      fe43d6d9
    • Stefan Richter's avatar
      firewire: core: fix Model_ID in modalias · 5ae73518
      Stefan Richter authored
      The modalias string of devices that represent units on a FireWire node
      did not show Module_ID entries within unit directories.  This was
      because firewire-core searched only the root directory of the
      configuration ROM for a Model_ID entry.
      
      We now search first the root directory, then the unit directory.  IOW
      honor a unit directory's Model_ID if present, otherwise fall back to the
      root directory's model ID (if present).
      
      Furthermore, apply the same change to Vendor_ID.  This had the same
      issue but it was less apparent because most devices provide Vendor_ID
      only in the root directory.
      
      And finally, also use this strategy for the remaining two IDs in the
      modalias, Specifier_ID and Version.  It does not actually make sense to
      look for them elsewhere than in the unit directory because they are
      mandatory there.  However, a uniform search order simplifies the
      implementation and has no adverse affect in practice.
      
      Side notes:
        - The older counterpart of this, nodemgr.c of ieee1394, looked for
          Vendor_ID first in the root directory, then in the unit directory,
          and for Model_ID only in the unit directory.
        - There is a single mainline driver which requires Vendor_ID and
          Model_ID --- the firedtv driver.  This one worked because FireDTVs
          provide Vendor_ID in the root directory and Model_ID identically in
          root directory and unit directory.
        - Apart from firedtv, there are currently no drivers known to me
          (including userspace drivers) that look at the Vendor_ID or Model_ID
          of the modalias.
      Reported-by: default avatarMaciej Żenczykowski <zenczykowski@gmail.com>
      Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
      5ae73518
  3. 17 Mar, 2010 1 commit
    • Clemens Ladisch's avatar
      firewire: ohci: add cycle timer quirk for the TI TSB12LV22 · 8301b91b
      Clemens Ladisch authored
      Among the many entries in the TSB12LV22 errata list (TI literature
      number SLLS312) is the following:
      
        PCI Slave reads of the Cycle Timer register may occasionally get an
        incorrect value.
        Software may be able to validate value by reading the register
        multiple times rapidly and evaluating for a reasonable difference.
      
      Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (untested)
      Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added #define)
      8301b91b
  4. 15 Mar, 2010 1 commit
  5. 24 Feb, 2010 29 commits
  6. 23 Feb, 2010 2 commits