- 10 Feb, 2017 18 commits
-
-
Jarno Rajahalme authored
Make the array of labels in struct ovs_key_ct_label an union, adding a u32 array of the same byte size as the existing u8 array. It is faster to loop through the labels 32 bits at the time, which is also the alignment of netlink attributes. Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarno Rajahalme authored
Receiving change events before the 'new' event for the connection has been received can be confusing. Avoid triggering change events for setting conntrack mark or labels before the conntrack entry has been confirmed. Fixes: 182e3042 ("openvswitch: Allow matching on conntrack mark") Fixes: c2ac6673 ("openvswitch: Allow matching on conntrack label") Signed-off-by:
-
Jarno Rajahalme authored
The conntrack lookup for existing connections fails to invert the packet 5-tuple for NATted packets, and therefore fails to find the existing conntrack entry. Conntrack only stores 5-tuples for incoming packets, and there are various situations where a lookup on a packet that has already been transformed by NAT needs to be made. Looking up an existing conntrack entry upon executing packet received from the userspace is one of them. This patch fixes ovs_ct_find_existing() to invert the packet 5-tuple for the conntrack lookup whenever the packet has already been transformed by conntrack from its input form as evidenced by one of the NAT flags being set in the conntrack state metadata. Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by:
-
Jarno Rajahalme authored
Fix comments referring to skb 'nfct' and 'nfctinfo' fields now that they are combined into '_nfct'. Signed-off-by:
-
David S. Miller authored
Netanel Belgazal says: ==================== Bug Fixes in ENA driver Changes from V3: * Rebase patchset to master and solve merge conflicts. * Remove redundant bug fix (fix error handling when probe fails) ==================== Signed-off-by: -
Netanel Belgazal authored
Signed-off-by:
Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by:
-
Netanel Belgazal authored
Move the host info config to be the first admin command that is executed. This change require the driver to remove the 'feature check' from host info configuration flow. The check is removed since the supported features bitmask field is retrieved only after calling ENA_ADMIN_DEVICE_ATTRIBUTES admin command. If set host info is not supported an error will be returned by the device. Signed-off-by:
-
Netanel Belgazal authored
The timeouts were too agressive and sometimes cause false alarms. Signed-off-by:
-
Netanel Belgazal authored
Signed-off-by:
-
Netanel Belgazal authored
Completion descriptors are accessed from the driver and from the device. To avoid reading the old value, use READ_ONCE macro. Signed-off-by:
-
Netanel Belgazal authored
Do not unamsk interrupts if we are in busy poll mode. Signed-off-by:
-
Netanel Belgazal authored
If the ena driver detects that the device is not behave as expected, it tries to reset the device. The reset flow calls ena_down, which will frees all the resources the driver allocates and then it will reset the device. This flow can cause memory corruption if the device is still writes to the driver's memory space. To overcome this potential race, move the reset before the device resources are freed. Signed-off-by:
-
Netanel Belgazal authored
ndo_get_stat64() can be called from atomic context, but the current implementation sends an admin command to retrieve the statistics from the device. This admin command can sleep. This patch re-factors the implementation of ena_get_stats64() to use the {rx,tx}bytes/count from the driver's inner counters, and to obtain the rx drop counter from the asynchronous keep alive (heart bit) event. Signed-off-by: -
Netanel Belgazal authored
If for some reason the device stops responding, and the device reset failes to recover the device, the mmio register read data structure will not be reinitialized. On driver removal, the driver will also try to reset the device, but this time the mmio data structure will be NULL. To solve this issue, perform the device reset in the remove function only if the device is runnig. Crash log 54.240382] BUG: unable to handle kernel NULL pointer dereference at (null) [ 54.244186] IP: [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] PGD 0 [ 54.244186] Oops: 0002 [#1] SMP [ 54.244186] Modules linked in: ena_drv(OE-) snd_hda_codec_generic kvm_intel kvm crct10dif_pclmul ppdev crc32_pclmul ghash_clmulni_intel aesni_intel snd_hda_intel aes_x86_64 snd_hda_controller lrw gf128mul cirrus glue_helper ablk_helper ttm snd_hda_codec drm_kms_helper cryptd snd_hwdep drm snd_pcm pvpanic snd_timer syscopyarea sysfillrect snd parport_pc sysimgblt serio_raw soundcore i2c_piix4 mac_hid lp parport psmouse floppy [ 54.244186] CPU: 5 PID: 1841 Comm: rmmod Tainted: G OE 3.16.0-031600-generic #201408031935 [ 54.244186] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 54.244186] task: ffff880135852880 ti: ffff8800bb640000 task.ti: ffff8800bb640000 [ 54.244186] RIP: 0010:[<ffffffffc067de5a>] [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] RSP: 0018:ffff8800bb643d50 EFLAGS: 00010083 [ 54.244186] RAX: 000000000000deb0 RBX: 0000000000030d40 RCX: 0000000000000003 [ 54.244186] RDX: 0000000000000202 RSI: 0000000000000058 RDI: ffffc90000775104 [ 54.244186] RBP: ffff8800bb643d88 R08: 0000000000000000 R09: cf00000000000000 [ 54.244186] R10: 0000000fffffffe0 R11: 0000000000000001 R12: 0000000000000000 [ 54.244186] R13: ffffc90000765000 R14: ffffc90000775104 R15: 00007fca1fa98090 [ 54.244186] FS: 00007fca1f1bd740(0000) GS:ffff88013fd40000(0000) knlGS:0000000000000000 [ 54.244186] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.244186] CR2: 0000000000000000 CR3: 00000000b9cf6000 CR4: 00000000001406e0 [ 54.244186] Stack: [ 54.244186] 0000000000000202 0000005800000286 ffffc90000765000 ffffc90000765000 [ 54.244186] ffff880135f6b000 ffff8800b9360000 00007fca1fa98090 ffff8800bb643db8 [ 54.244186] ffffffffc0680b3d ffff8800b93608c0 ffffc90000765000 ffff880135f6b000 [ 54.244186] Call Trace: [ 54.244186] [<ffffffffc0680b3d>] ena_com_dev_reset+0x1d/0x1b0 [ena_drv] [ 54.244186] [<ffffffffc0678497>] ena_remove+0xa7/0x130 [ena_drv] [ 54.244186] [<ffffffff813d4df6>] pci_device_remove+0x46/0xc0 [ 54.244186] [<ffffffff814c3b7f>] __device_release_driver+0x7f/0xf0 [ 54.244186] [<ffffffff814c4738>] driver_detach+0xc8/0xd0 [ 54.244186] [<ffffffff814c3969>] bus_remove_driver+0x59/0xd0 [ 54.244186] [<ffffffff814c4fde>] driver_unregister+0x2e/0x60 [ 54.244186] [<ffffffff810f0a80>] ? show_refcnt+0x40/0x40 [ 54.244186] [<ffffffff813d4ec3>] pci_unregister_driver+0x23/0xa0 [ 54.244186] [<ffffffffc068413f>] ena_cleanup+0x10/0xed1 [ena_drv] [ 54.244186] [<ffffffff810f3a47>] SyS_delete_module+0x157/0x1e0 [ 54.244186] [<ffffffff81014fb7>] ? do_notify_resume+0xc7/0xd0 [ 54.244186] [<ffffffff81793fad>] system_call_fastpath+0x1a/0x1f [ 54.244186] Code: c3 4d 8d b5 04 01 01 00 4c 89 f7 e8 e1 5a 11 c1 48 89 45 c8 41 0f b7 85 00 01 01 00 8d 48 01 66 2d 52 21 66 41 89 8d 00 01 01 00 <66> 41 89 04 24 0f b7 45 d4 89 45 d0 89 c1 41 0f b7 85 00 01 01 [ 54.244186] RIP [<ffffffffc067de5a>] ena_com_reg_bar_read32+0x8a/0x180 [ena_drv] [ 54.244186] RSP <ffff8800bb643d50> [ 54.244186] CR2: 0000000000000000 [ 54.244186] ---[ end trace 18dd9889b6497810 ]--- Signed-off-by:
-
Netanel Belgazal authored
ENA default hash configures IPv4_frag hash twice instead of configure non-IP packets. The bug caused IPv4 fragmented packets to be calculated based on L2 source and destination address instead of L3 source and destination. IPv4 packets can reach to the wrong Rx queue. Signed-off-by:
-
Netanel Belgazal authored
ena_flow_data_to_flow_hash and ena_flow_hash_to_flow_type treat the ena_flow_hash_to_flow_type enum as power of two values. Change the values of ena_admin_flow_hash_fields to be power of two values. This bug effect the ethtool set/get rxnfc. ethtool will report wrong values hash fields for get and will configure wrong hash fields in set. Signed-off-by:
-
Netanel Belgazal authored
The ENA driver tries to open a queue per vCPU. To determine how many vCPUs the instance have it uses num_possible_cpus() while it should have use num_online_cpus() instead. Signed-off-by:
-
Netanel Belgazal authored
Remove NETIF_F_NTUPLE from netdev->features. The ENA device driver does not support ntuple filtering. Signed-off-by:
-
- 09 Feb, 2017 22 commits
-
-
David S. Miller authored
Govindarajulu Varadarajan says: ==================== enic: add vxlan offload support This series adds vxlan offload support for enic driver. The first patch adds vxlan devcmd for configuring vxland offload parameters. Second patch adds ndo_udp_tunnel_add/del and offload on rx path. There are to modes in which fw supports vxlan offload. mode 0: fcoe bit is set for encapsulated packet. fcoe_fc_crc_ok is set if checksum of csum is ok. This bit is or of ip_csum_ok and tcp_udp_csum_ok mode 2: BIT(0) in rss_hash is set if it is encapsulated packet. BIT(1) is set if outer_ip_csum_ok/ BIT(2) is set if outer_tcp_csum_ok Some hw supports only mode 0, some support mode 0 and 2. Driver gets the supported modes bitmap using get_supported_feature_ver devcmd and selects the highest mode both driver and fw supports. Third patch adds offload support on tx path by adding enic_features_check(). v2: Order local variable declarations from longest to shortest line, on all three patches. ==================== Signed-off-by: -
Govindarajulu Varadarajan authored
Define ndo_features_check. Hw supports offload only for ipv4 inner and ipv4 outer pkt. Code refactor for setting inner tcp pseudo csum. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
Defines enic_udp_tunnel_add/del for configuring vxlan tunnel offload. enic supports offload of only one ipv4/udp port. There are two modes that fw supports for vxlan offload. mode 0: fcoe bit is set for encapsulated packet. fcoe_fc_crc_ok is set if checksum of csum is ok. This bit is or of ip_csum_ok and tcp_udp_csum_ok mode 2: BIT(0) in rss_hash is set if it is encapsulated packet. BIT(1) is set if outer_ip_csum_ok/ BIT(2) is set if outer_tcp_csum_ok tcp_udp_csum_ok/ipv4_csum_ok is set if inner csum is OK. Signed-off-by:
-
Govindarajulu Varadarajan authored
This patch adds devcmds needed for vxlan offload. Implement 3 new devcmd overlay_offload_ctrl: enable/disable offload overlay_offload_cfg: update offload udp port number get_supported_feature_ver: get hw supported offload version. Each version has different bitmap for csum_ok/encap Signed-off-by:
-
Andrew Lunn authored
Move it out from the middle for the #defines to just before it is needed. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Florian Fainelli authored
While adding switch.o to the list of DSA object files, we essentially duplicated the previous obj-y line and just added switch.o, remove the duplicate. Fixes: f515f192 ("net: dsa: add switch notifier") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
David S. Miller authored
Timur Tabi says: ==================== net: qcom/emac: add the last ethtool functions These two patches implement the remaining two ethtool functions that are of interest to the Qualcomm EMAC driver. These are the last patches that will be submitted for the 4.11 merge window. ==================== Signed-off-by: -
Timur Tabi authored
Implement the set_ringparam method, which allows the user to specify the size of the TX and RX descriptor rings. The values are constrained to the limits of the hardware. Since the driver does not use separate queues for mini or jumbo frames, attempts to set those values are rejected. If the interface is already running when the setting is changed, then the interface is reset. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
Timur Tabi authored
Implement the get_regs_len and get_regs ethtool methods. The driver returns the values of selected hardware registers. The make the register offsets known to emac_ethtool, the the register offset macros are all combined into one header file. They were inexplicably and arbitrarily split between two files. Signed-off-by:
-
Arnd Bergmann authored
The other instances of this structure got removed along with the MDIO device change, but this one was left behind and needs to be removed as well: arch/arm/mach-orion5x/wnr854t-setup.c:109:44: error: 'wnr854t_switch_plat_data' defined but not used [-Werror=unused-variable] static struct dsa_platform_data __initdata wnr854t_switch_plat_data = { Fixes: 575e93f7 ("ARM: orion: Register DSA switch as a MDIO device") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add sender-side procedures for stream reconf asoc reset and add streams Patch 4/6 is to implement sender-side procedures for the SSN/TSN Reset Request Parameter described in rfc6525 section 5.1.4, patch 3/6 is ahead of it to define a function to make the request chunk for it. Patch 6/6 is to implement sender-side procedures for the Add Incoming and Outgoing Streams Request Parameter Request Parameter described in rfc6525 section 5.1.5 and 5.1.6, patch 5/6 is ahead of it to define a function to make the request chunk for it. Patch 2/6 is a fix to recover streams states when it fails to send request and Patch 1/6 is to drop some unncessary __packed from some old structures. v1->v2: - put these into a smaller group. - rename some temporary variables in the codes. - rename the titles of the commits and improve some changelogs. v2->v3: - re-split the patchset and make sure it has no dead codes for review. - move some codes into stream.c from socket.c. v3->v4: - add one more patch to fix a send reset stream request issue. - doing actual work only when request is sent successfully. - reduce some indents in sctp_send_add_streams. v4->v5: - close streams before sending request and recover them when sending fails in patch 1/5 and patch 3/5 v5->v6: - add patch 1/6 to drop some unncessary __packed from some old structures. - remove __packed from some new structures in patch 3/6 and 5/6. - define unsigned int outcnt and incnt to make codes smaller in patch 6/6. - use krealloc instead of kcalloc and remove ksize check in patch 6/6, as ksize check is acutally used in krealloc already. ==================== Signed-off-by: -
Xin Long authored
This patch is to implement Sender-Side Procedures for the Add Outgoing and Incoming Streams Request Parameter described in rfc6525 section 5.1.5-5.1.6. It is also to add sockopt SCTP_ADD_STREAMS in rfc6525 section 6.3.4 for users. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to define Add Incoming/Outgoing Streams Request Parameter described in rfc6525 section 4.5 and 4.6. They can be in one same chunk trunk as rfc6525 section 3.1-7 describes, so make them in one function. Signed-off-by:
-
Xin Long authored
This patch is to implement Sender-Side Procedures for the SSN/TSN Reset Request Parameter descibed in rfc6525 section 5.1.4. It is also to add sockopt SCTP_RESET_ASSOC in rfc6525 section 6.3.3 for users. Signed-off-by:
-
Xin Long authored
This patch is to define SSN/TSN Reset Request Parameter described in rfc6525 section 4.3. Signed-off-by:
-
Xin Long authored
Now when sending stream reset request, it closes the streams to block further xmit of data until this request is completed, then calls sctp_send_reconf to send the chunk. But if sctp_send_reconf returns err, and it doesn't recover the streams' states back, which means the request chunk would not be queued and sent, so the asoc will get stuck, streams are closed and no packet is even queued. This patch is to fix it by recovering the streams' states when it fails to send the request, it is also to fix a return value. Fixes: 7f9d68ac ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Signed-off-by:
-
Xin Long authored
commit 85c727b5 ("sctp: drop __packed from almost all SCTP structures") has removed __packed from almost all SCTP structures. But there still are three structures where it should be dropped. This patch is to remove it from some stream reconf structures. Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: more encap offloads This patch series adds support for RX checksum offload of encapsulated packets. It also adds support for configuring the hardware's lists of UDP ports used for VXLAN and GENEVE encapsulation offloads. Since changing these lists causes the MC to reboot, the driver has been hardened against reboots, which used to be considered an exceptional occurrence but are now normal. ==================== Signed-off-by: -
Jon Cooper authored
Implement ndo_udp_tunnel_{add,del} to update the NIC's list of VXLAN and GENEVE UDP ports. Also reset the port list to empty on driver load and on driver unload, with appropriate flag set on the unload case. These port numbers are used for RX inner checksum offload, and in future will also be used for TX inner checksum offload and encapsulated TSO. Signed-off-by:Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Matthew Slattery authored
Signed-off-by:
-
Jon Cooper authored
This function wasn't being called in this particular case when the MC reboots. This caused resource reallocations to not be handled properly and often ended up disabling the interface. Signed-off-by:
-
Jon Cooper authored
This is mainly to prepare for a future overlay networking patch that could cause an MC reset at probe time if the UDP tunnel port list is set immediately upon driver load. Signed-off-by:
-
