- 03 Jul, 2006 40 commits
-
-
Heiko Carstens authored
CONFIG_FRAME_POINTER support for s390. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Framework to generate and save stacktraces quickly, without printing anything to the console. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
Remove CONFIG_STACK_BACKTRACE_COLS. This feature didnt work out: instead of making kernel debugging more efficient, it produces much harder to read stacktraces! Check out this trace for example: http://static.flickr.com/47/158326090_35d0129147_b_d.jpg That backtrace could have been printed much nicer as a one-entry-per-line thing, taking the same amount of screen real-estate. Plus we remove 30 lines of kernel code as well. Signed-off-by:
-
Ingo Molnar authored
Document stack frame nesting internals some more. Signed-off-by:
-
Ingo Molnar authored
Beautify x86_64 stacktraces to be more readable. Signed-off-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Ingo Molnar authored
Locking init improvement: - introduce and use __SPIN_LOCK_UNLOCKED for array initializations, to pass in the name string of locks, used by debugging Signed-off-by:
-
Ingo Molnar authored
Work around weird section nesting build bug causing smp-alternatives failures under certain circumstances. Signed-off-by:
-
Ingo Molnar authored
Generic lock debugging: - generalized lock debugging framework. For example, a bug in one lock subsystem turns off debugging in all lock subsystems. - got rid of the caller address passing (__IP__/__IP_DECL__/etc.) from the mutex/rtmutex debugging code: it caused way too much prototype hackery, and lockdep will give the same information anyway. - ability to do silent tests - check lock freeing in vfree too. - more finegrained debugging options, to allow distributions to turn off more expensive debugging features. There's no separate 'held mutexes' list anymore - but there's a 'held locks' stack within lockdep, which unifies deadlock detection across all lock classes. (this is independent of the lockdep validation stuff - lockdep first checks whether we are holding a lock already) Here are the current debugging options: CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y which do: config DEBUG_MUTEXES bool "Mutex debugging, basic checks" config DEBUG_LOCK_ALLOC bool "Detect incorrect freeing of live mutexes" Signed-off-by: -
Ingo Molnar authored
With the lock validator we detect mutex deadlocks (and more), the mutex deadlock checking code is both redundant and slower. So remove it. Signed-off-by:
-
Ingo Molnar authored
cleanup: remove unused DEBUG_BUG_ON() defines. Signed-off-by:
-
Ingo Molnar authored
Rename DEBUG_WARN_ON() to the less generic DEBUG_LOCKS_WARN_ON() name, so that it's clear that this is a lock-debugging internal mechanism. Signed-off-by:
-
Ingo Molnar authored
RWSEM_DEBUG used to be a printk based 'tracing' facility, probably used for very early prototypes of the rwsem code. Remove it. Signed-off-by:
-
Ingo Molnar authored
Clean up rwsems. Signed-off-by:
-
Ingo Molnar authored
lockdep needs to have the waitqueue lock initialized for on-stack waitqueues implicitly initialized by DECLARE_COMPLETION(). Introduce the API. Signed-off-by:
-
Ingo Molnar authored
Introduce local_irq_enable_in_hardirq() API. It is currently aliased to local_irq_enable(), hence has no functional effects. This API will be used by lockdep, but even without lockdep this will better document places in the kernel where a hardirq context enables hardirqs. Signed-off-by:
-
Ingo Molnar authored
lockdep wants to use the disable_irq()/enable_irq() prototypes before they are provied by the platform's asm/irq.h. So move them out of the CONFIG_GENERIC_HARDIRQS define - all architectures have a common prototype for this anyway. Add special lockdep variants of irq line disabling/enabling. These should be used for locking constructs that know that a particular irq context which is disabled, and which is the only irq-context user of a lock, that it's safe to take the lock in the irq-disabled section without disabling hardirqs. [akpm@osdl.org: build fix] Signed-off-by:
-
Ingo Molnar authored
Add the per_cpu_offset() generic method. (used by the lock validator) Signed-off-by:
-
Heiko Carstens authored
Provide a common print_ip_sym() function that prints the passed instruction pointer as well as the symbol belonging to it. Avoids adding a bunch of #ifdef CONFIG_64BIT in order to get the printk format right on 32/64 bit platforms. Acked-by:
-
Ingo Molnar authored
Add is_module_address() method - to be used by lockdep. Signed-off-by:
-
Heiko Carstens authored
s390's console_init must enable interrupts, but early_boot_irqs_on() gets called later. To avoid problems move console_init() after local_irq_enable(). Signed-off-by:
-
Ingo Molnar authored
The lock validator triggered a number of bugs in the floppy driver, all related to the floppy driver allocating and freeing irq and dma resources from interrupt context. The initial solution was to use schedule_work() to push this into process context, but this caused further problems: for example the current floppy driver in -mm2 is totally broken and all floppy commands time out with an error. (as reported by Barry K. Nathan) This patch tries another solution: simply get rid of all that dynamic IRQ and DMA allocation/freeing. I doubt it made much sense back in the heydays of floppies (if two devices raced for DMA or IRQ resources then we didnt handle those cases too gracefully anyway), and today it makes near zero sense. So the new code does the simplest and most straightforward thing: allocate IRQ and DMA resources at module init time, and free them at module removal time. Dont try to release while the driver is operational. This, besides making the floppy driver functional again has an added bonus, floppy IRQ stats are finally persistent and visible in /proc/interrupts: 6: 63 XT-PIC-level floppy Besides normal floppy IO i have also tested IO error handling, motor-off timeouts, etc. - and everything seems to be working fine. Signed-off-by:
-
Andrew Morton authored
sound/sparc/amd7930.c: In function 'amd7930_attach_common': sound/sparc/amd7930.c:1040: warning: format '%08lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' sound/sparc/cs4231.c:2043: warning: format '%016lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' sound/sparc/dbri.c: In function 'dbri_attach': sound/sparc/dbri.c:2650: warning: format '%016lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by:
-
Andrew Morton authored
drivers/input/serio/i8042-sparcio.h:91: error: '__mod_of_device_table' aliased to undefined symbol 'i8042_match' Cc: Dmitry Torokhov <dtor_core@ameritech.net> DESC sparc: resource warning fix EDESC From: Andrew Morton <akpm@osdl.org> sound/sparc/amd7930.c: In function 'amd7930_attach_common': sound/sparc/amd7930.c:1040: warning: format '%08lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by:
-
Arjan van de Ven authored
Mark the static struct file_operations in drivers/char as const. Making them const prevents accidental bugs, and moves them to the .rodata section so that they no longer do any false sharing; in addition with the proper debug option they are then protected against corruption.. [akpm@osdl.org: build fix] Signed-off-by:
-
Antonino A. Daplas authored
When a VT is newly allocated, the module reference count of the backend will be incremented. This should be balanced by a module_put() when this VT is deallocated. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Vitaly Wool authored
Add support for Display Update Module and RGB framebuffer device on Philips PNX4008 ARM board. Signed-off-by:
Grigory Tolstolytkin <gtolstolytkin@ru.mvista.com> Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Michael Krufky authored
Update MAINTAINERS with contact info for Mike Isely, the PVRUSB2 maintainer, while also adding the pvrusb2 mailing list and web site. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Randy Dunlap authored
Martin says that I can add self to MAINTAINERS. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Martin Waitz <tali@admingilde.org> Signed-off-by:
-
Chuck Ebbert authored
Fix check for bad address; use macro instead of open-coding two checks. Taken from RHEL4 kernel update. From: Ernie Petrides <petrides@redhat.com> For background, the BAD_ADDR() macro should return TRUE if the address is TASK_SIZE, because that's the lowest address that is *not* valid for user-space mappings. The macro was correct in binfmt_aout.c but was wrong for the "equal to" case in binfmt_elf.c. There were two in-line validations of user-space addresses in binfmt_elf.c, which have been appropriately converted to use the corrected BAD_ADDR() macro in the patch you posted yesterday. Note that the size checks against TASK_SIZE are okay as coded. The additional changes that I propose are below. These are in the error paths for bad ELF entry addresses once load_elf_binary() has already committed to exec'ing the new image (following the tearing down of the task's original address space). The 1st hunk deals with the interp-side of the outer "if". There were two problems here. The printk() should be removed because this path can be triggered at will by a bogus interpreter image created and used by a malicious user. Further, the error code should not be ENOEXEC, because that causes the loop in search_binary_handler() to continue trying other exec handlers (twice, in fact). But it's too late for this to work correctly, because the user address space has already been torn down, and an exec() failure cannot be returned to the user code because the code no longer exists. The only recovery is to force a SIGSEGV, but it's best to terminate the search loop immediately. I somewhat arbitrarily chose EINVAL as a fallback error code, but any error returned by load_elf_interp() will override that (but this value will never be seen by user-space). The 2nd hunk deals with the non-interp-side of the outer "if". There were two problems here as well. The SIGSEGV needs to be forced, because a prior sigaction() syscall might have set the associated disposition to SIG_IGN. And the ENOEXEC should be changed to EINVAL as described above. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
Ernie Petrides <petrides@redhat.com> Signed-off-by:
-
Christoph Lameter authored
It turns out that it is advantageous to leave a small portion of unmapped file backed pages if all of a zone's pages (or almost all pages) are allocated and so the page allocator has to go off-node. This allows recently used file I/O buffers to stay on the node and reduces the times that zone reclaim is invoked if file I/O occurs when we run out of memory in a zone. The problem is that zone reclaim runs too frequently when the page cache is used for file I/O (read write and therefore unmapped pages!) alone and we have almost all pages of the zone allocated. Zone reclaim may remove 32 unmapped pages. File I/O will use these pages for the next read/write requests and the unmapped pages increase. After the zone has filled up again zone reclaim will remove it again after only 32 pages. This cycle is too inefficient and there are potentially too many zone reclaim cycles. With the 1% boundary we may still remove all unmapped pages for file I/O in zone reclaim pass. However. it will take a large number of read and writes to get back to 1% again where we trigger zone reclaim again. The zone reclaim 2.6.16/17 does not show this behavior because we have a 30 second timeout. [akpm@osdl.org: rename the /proc file and the variable] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Bjorn Helgaas authored
PNP devices can use shared interrupts, so check to see whether we'll need SA_SHIRQ for request_irq(). The builtin PDH UART on the HP rx8640 is an example of an ACPI/PNP device that uses a shareable level-triggered, active-low interrupt. The interrupt can be shared in very large I/O configurations or by artificially lowering IA64_DEF_LAST_DEVICE_VECTOR. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Li Shaohua <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Acked-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Bjorn Helgaas authored
ACPI supplies a "shareable" indication, but PNPACPI ignores it. If a PNP device uses a shared interrupt, request_irq() fails because the PNP driver can't tell whether to supply SA_SHIRQ. This patch allows PNP drivers to test (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) Signed-off-by: -
Theodore Tso authored
This is needed to fix UML compilation given that alternatives_smp_module_add and alternatives_smp_module_del are null inline functions if !CONFIG_SMP. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Arjan van de Ven authored
reported by Jure Repinc: > > http://bugzilla.kernel.org/show_bug.cgi?id=6773 > > checked out dmesg output and found the message > > > > ====================================================== > > [ BUG: hard-safe -> hard-unsafe lock order detected! ] > > ------------------------------------------------------ > > > > starting at line 660 of the dmesg.txt that I will attach. The patch below should fix the deadlock, albeit I suspect it's not the "right" fix; the right fix may well be to move the rx processing in bcm43xx to softirq context. [it's debatable, ipw2200 hit this exact same bug; at some point it's better to bite the bullet and move this to the common layer as my patch below does] Make the nl_table_lock irq-safe; it's taken for read in various netlink functions, including functions that several wireless drivers (ipw2200, bcm43xx) want to call from hardirq context. The deadlock was found by the lock validator. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Michael Buesch <mb@bu3sch.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by:
"David S. Miller" <davem@davemloft.net> Cc: jamal <hadi@cyberus.ca> Signed-off-by:
-
Heiko Carstens authored
Have a special version of print_symbol() for s390 which clears the most significant bit of addr before calling __print_symbol(). This seems to be better than checking/changing each place in the kernel that saves an instruction pointer. Without this the output would look like: hardirqs last enabled at (30907): [<80018c6a>] 0x80018c6a hardirqs last disabled at (30908): [<8001e48c>] 0x8001e48c softirqs last enabled at (30904): [<8001dc96>] 0x8001dc96 softirqs last disabled at (30897): [<8001dc50>] 0x8001dc50 instead of this: hardirqs last enabled at (19421): [<80018c72>] cpu_idle+0x176/0x1c4 hardirqs last disabled at (19422): [<8001e494>] io_no_vtime+0xa/0x1a softirqs last enabled at (19418): [<8001dc9e>] do_softirq+0xa6/0xe8 softirqs last disabled at (19411): [<8001dc58>] do_softirq+0x60/0xe8 Acked-by:
-
Andrew Morton authored
Remove duplicate/redundant/wrong IRQF_PERCPU definition. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
john stultz authored
We're not reay to take a timer interrupt until timekeeping_init() has run. But time_init() will start the time interrupt and if it is called with local interrupts enabled we'll immediately take an interrupt and die. Fix that by running timekeeping_init() prior to time_init(). We don't know _why_ local interrupts got enabled on Jesse Brandeburg's machine. That's a separate as-yet-unsolved problem. THe patch adds a little bit of debugging to detect that. This whole requirement that local interrupts be held off during early boot keeps on biting us. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
ARM devel merge introduced new machine functionality which was not covered by the ARM -> genirq patches. Fix it up and make it compile again. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
For several proc-<cputype>.S files the include of proc-macros.S is missing. Make it compile and work again. Signed-off-by:
-
Thomas Gleixner authored
The irqflags consolidation converted SA_PERCPU_IRQ to IRQF_PERCPU but did not define the new constant. Signed-off-by:
-
