- 08 Nov, 2018 35 commits
-
-
Edward Cree authored
Expose the MUM/SUC Firmware, UEFI Expansion ROM and MC Status partitions of the NIC's NVRAM as MTDs if found on the NIC. The first two are needed in order to properly update them when performing firmware updates; the MC Status partition is used to determine whether a signed firmware image was accepted or rejected by a Secure NIC. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michał Mirosław says: ==================== net/vlan: prepare for removal of VLAN_TAG_PRESENT This is a preparatory patchset before removing the use of VLAN_TAG_PRESENT bit in skb->vlan_tci as indication of VLAN offload. This set includes only cleanups that allow abstracting of code testing VLAN tag presence in drivers and networking code. ==================== Signed-off-by: -
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Yafang Shao authored
Set the backlog earlier in inet_dccp_listen() and inet_listen(), then we can avoid the redundant setting. Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Davide Caratti authored
GSO tunneled packets are always segmented in software before they are transmitted by a VLAN, even when the lower device can offload tunnel encapsulation and VLAN together (i.e., some bits in NETIF_F_GSO_ENCAP_ALL mask are set in the lower device 'vlan_features'). If we let VLANs have the same tunnel offload capabilities as their lower device, throughput can improve significantly when CPU is limited on the transmitter side. - set NETIF_F_GSO_ENCAP_ALL bits in the VLAN 'hw_features', to ensure that 'features' will have those bits zeroed only when the lower device has no hardware support for tunnel encapsulation. - for the same reason, copy GSO-related bits of 'hw_enc_features' from lower device to VLAN, and ensure to update that value when the lower device changes its features. - set NETIF_F_HW_CSUM bit in the VLAN 'hw_enc_features' if 'real_dev' is able to compute checksums at least for a kind of packets, like done with commit 8403debe ("vlan: Keep NETIF_F_HW_CSUM similar to other software devices"). This avoids software segmentation due to mismatching checksum capabilities between VLAN's 'features' and 'hw_enc_features'. Reported-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Paolo Abeni authored
The tun XDP sendmsg code path, unconditionally computes the symmetric hash of each packet for RFS's sake, even when we could skip it. e.g. when the device has a single queue. This change adds the check already in-place for the skb sendmsg path to avoid unneeded hashing. The above gives small, but measurable, performance gain for VM xmit path when zerocopy is not enabled. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Mathias Thore authored
Add byte queue limits support in the fsl_ucc_hdlc driver. Signed-off-by:
Mathias Thore <mathias.thore@infinera.com> Signed-off-by:
-
Heiner Kallweit authored
Instead of listing every single PHYID, load the driver for every PHYID with a Realtek OUI, independent of model number and revision. This patch also improves two further aspects: - constify realtek_tbl[] - the mask should have been 0xffffffff instead of 0x001fffff so far, by masking out some bits a PHY from another vendor could have been matched Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
phy_trigger_machine() is used in phy.c only, so we can make it static. Signed-off-by:
-
kbuild test robot authored
drivers/net/dsa/bcm_sf2_cfp.c:1168:2-3: Unneeded semicolon drivers/net/dsa/bcm_sf2_cfp.c:532:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: ae7a5aff ("net: dsa: bcm_sf2: Keep copy of inserted rules") CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Justin Chen authored
Add support for BCM7255 EPHY. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== udp: implement GRO support This series implements GRO support for UDP sockets, as the RX counterpart of commit bec1f6f6 ("udp: generate gso with UDP_SEGMENT"). The core functionality is implemented by the second patch, introducing a new sockopt to enable UDP_GRO, while patch 3 implements support for passing the segment size to the user space via a new cmsg. UDP GRO performs a socket lookup for each ingress packets and aggregate datagram directed to UDP GRO enabled sockets with constant l4 tuple. UDP GRO packets can land on non GRO-enabled sockets, e.g. due to iptables NAT rules, and that could potentially confuse existing applications. The solution adopted here is to de-segment the GRO packet before enqueuing as needed. Since we must cope with packet reinsertion after de-segmentation, the relevant code is factored-out in ipv4 and ipv6 specific helpers and exposed to UDP usage. While the current code can probably be improved, this safeguard ,implemented in the patches 4-7, allows future enachements to enable UDP GSO offload on more virtual devices eventually even on forwarded packets. The last 4 for patches implement some performance and functional self-tests, re-using the existing udpgso infrastructure. The problematic scenario described above is explicitly tested. This revision of the series try to address the feedback provided by Willem and Subash on previous iteration. ==================== Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Paolo Abeni authored
Extends the existing udp programs to allow checking for proper GRO aggregation/GSO size, and run the tests via a shell script, using a veth pair with XDP program attached to trigger the GRO code path. rfc v3 -> v1: - use ip route to attach the xdp helper to the veth rfc v2 -> rfc v3: - add missing test program options documentation - fix sporatic test failures (receiver faster than sender) Signed-off-by:
-
Paolo Abeni authored
Run on top of veth pair, using a dummy XDP program to enable the GRO. rfc v3 -> v1: - use ip route to attach the xdp helper to the veth Signed-off-by:
-
Paolo Abeni authored
This trivial XDP program does nothing, but will be used by the next patch to test the GRO path in a net namespace, leveraging the veth XDP implementation. It's added here, despite its 'net' usage, to avoid the duplication of the llc-related makefile boilerplate. rfc v3 -> v1: - move the helper implementation into the bpf directory, don't touch udpgso_bench_rx rfc v2 -> rfc v3: - move 'x' option handling here Signed-off-by:
-
Paolo Abeni authored
And fix a couple of buglets (port option processing, clean termination on SIGINT). This is preparatory work for GRO tests. rfc v2 -> rfc v3: - use ETH_MAX_MTU Signed-off-by:
-
Paolo Abeni authored
In some scenarios, the GRO engine can assemble an UDP GRO packet that ultimately lands on a non GRO-enabled socket. This patch tries to address the issue explicitly checking for the UDP socket features before enqueuing the packet, and eventually segmenting the unexpected GRO packet, as needed. We must also cope with re-insertion requests: after segmentation the UDP code calls the helper introduced by the previous patches, as needed. Segmentation is performed by a common helper, which takes care of updating socket and protocol stats is case of failure. rfc v3 -> v1 - fix compile issues with rxrpc - when gso_segment returns NULL, treat is as an error - added 'ipv4' argument to udp_rcv_segment() rfc v2 -> rfc v3 - moved udp_rcv_segment() into net/udp.h, account errors to socket and ns, always return NULL or segs list Signed-off-by:
-
Paolo Abeni authored
So that we can re-use it at the UDP level in the next patch rfc v3 -> v1: - add the helper declaration into the ipv6 header Signed-off-by:
-
Paolo Abeni authored
So that we can re-use it at the UDP level in a later patch rfc v3 -> v1 - add the helper declaration into the ip header Signed-off-by:
-
Paolo Abeni authored
When UDP GRO is enabled, the UDP_GRO cmsg will carry the ingress datagram size. User-space can use such info to compute the original packets layout. Signed-off-by:
-
Paolo Abeni authored
This is the RX counterpart of commit bec1f6f6 ("udp: generate gso with UDP_SEGMENT"). When UDP_GRO is enabled, such socket is also eligible for GRO in the rx path: UDP segments directed to such socket are assembled into a larger GSO_UDP_L4 packet. The core UDP GRO support is enabled with setsockopt(UDP_GRO). Initial benchmark numbers: Before: udp rx: 1079 MB/s 769065 calls/s After: udp rx: 1466 MB/s 24877 calls/s This change introduces a side effect in respect to UDP tunnels: after a UDP tunnel creation, now the kernel performs a lookup per ingress UDP packet, while before such lookup happened only if the ingress packet carried a valid internal header csum. rfc v2 -> rfc v3: - fixed typos in macro name and comments - really enforce UDP_GRO_CNT_MAX, instead of UDP_GRO_CNT_MAX + 1 - acquire socket lock in UDP_GRO setsockopt rfc v1 -> rfc v2: - use a new option to enable UDP GRO - use static keys to protect the UDP GRO socket lookup Signed-off-by:
-
Paolo Abeni authored
The *encap_needed static keys are enabled by UDP tunnels and several UDP encapsulations type, but they are never turned off. This can cause unneeded overall performance degradation for systems where such features are used transiently. This patch introduces complete book-keeping for such keys, decreasing the usage at socket destruction time, if needed, and avoiding that the same socket could increase the key usage multiple times. rfc v3 -> v1: - add socket lock around udp_tunnel_encap_enable() rfc v2 -> rfc v3: - use udp_tunnel_encap_enable() in setsockopt() Signed-off-by:
-
David S. Miller authored
Mike Manning says: ==================== vrf: allow simultaneous service instances in default and other VRFs Services currently have to be VRF-aware if they are using an unbound socket. One cannot have multiple service instances running in the default and other VRFs for services that are not VRF-aware and listen on an unbound socket. This is because there is no easy way of isolating packets received in the default VRF from those arriving in other VRFs. This series provides this isolation for stream sockets subject to the existing kernel parameter net.ipv4.tcp_l3mdev_accept not being set, given that this is documented as allowing a single service instance to work across all VRF domains. Similarly, net.ipv4.udp_l3mdev_accept is checked for datagram sockets, and net.ipv4.raw_l3mdev_accept is introduced for raw sockets. The functionality applies to UDP & TCP services as well as those using raw sockets, and is for IPv4 and IPv6. Example of running ssh instances in default and blue VRF: $ /usr/sbin/sshd -D $ ip vrf exec vrf-blue /usr/sbin/sshd $ ss -ta | egrep 'State|ssh' State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 128 0.0.0.0%vrf-blue:ssh 0.0.0.0:* LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* ESTAB 0 0 192.168.122.220:ssh 192.168.122.1:50282 LISTEN 0 128 [::]%vrf-blue:ssh [::]:* LISTEN 0 128 [::]:ssh [::]:* ESTAB 0 0 [3000::2]%vrf-blue:ssh [3000::9]:45896 ESTAB 0 0 [2000::2]:ssh [2000::9]:46398 v1: - Address Paolo Abeni's comments (patch 4/5) - Fix build when CONFIG_NET_L3_MASTER_DEV not defined (patch 1/5) v2: - Address David Aherns' comments (patches 4/5 and 5/5) - Remove patches 3/5 and 5/5 from series for individual submissions - Include a sysctl for raw sockets as recommended by David Ahern - Expand series into 10 patches and provide improved descriptions v3: - Update description for patch 1/10 and remove patch 6/10 v4: - Set default to enabled for raw socket sysctl as recommended by David Ahern v5: - Address review comments from David Ahern in patches 2-5 ==================== Signed-off-by: -
Dewi Morgan authored
For bound udp sockets in a vrf, also check the sdif to get the index for ingress devices enslaved to an l3mdev. Signed-off-by:
Dewi Morgan <morgand@vyatta.att-mail.com> Signed-off-by:
Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
Mike Manning authored
If the skb for multicast packets marked as enslaved to a VRF are received, then the secondary device index should be used to obtain the real device. And verify the multicast address against the enslaved rather than the l3mdev device. Signed-off-by:
-
Mike Manning authored
If link-local packets are marked as enslaved to a VRF, then to allow ping to the link-local from a vrf, the error handling for IPV6_PKTINFO needs to be relaxed to also allow the pkt ipi6_ifindex to be that of a slave device to the vrf. Note that the real device also needs to be retrieved in icmp6_iif() to set the ipv6 flow oif to this for icmp echo reply handling. The recent commit 24b711ed ("net/ipv6: Fix linklocal to global address with VRF") takes care of this, so the sdif does not need checking here. This fix makes ping to link-local consistent with that to global addresses, in that this can now be done from within the same VRF that the address is in. Signed-off-by:
-
Mike Manning authored
The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by:
-
Duncan Eastoe authored
When there exist a pair of raw sockets one unbound and one bound to a VRF but equal in all other respects, when a packet is received in the VRF context, __raw_v4_lookup() matches on both sockets. This results in the packet being delivered over both sockets, instead of only the raw socket bound to the VRF. The bound device checks in __raw_v4_lookup() are replaced with a call to raw_sk_bound_dev_eq() which correctly handles whether the packet should be delivered over the unbound socket in such cases. In __raw_v6_lookup() the match on the device binding of the socket is similarly updated to use raw_sk_bound_dev_eq() which matches the handling in __raw_v4_lookup(). Importantly raw_sk_bound_dev_eq() takes the raw_l3mdev_accept sysctl into account. Signed-off-by:
Duncan Eastoe <deastoe@vyatta.att-mail.com> Signed-off-by:
-
Mike Manning authored
Add a sysctl raw_l3mdev_accept to control raw socket lookup in a manner similar to use of tcp_l3mdev_accept for stream and of udp_l3mdev_accept for datagram sockets. Have this default to enabled for reasons of backwards compatibility. This is so as to specify the output device with cmsg and IP_PKTINFO, but using a socket not bound to the corresponding VRF. This allows e.g. older ping implementations to be run with specifying the device but without executing it in the VRF. If the option is disabled, packets received in a VRF context are only handled by a raw socket bound to the VRF, and correspondingly packets in the default VRF are only handled by a socket not bound to any VRF. Signed-off-by:
-
Mike Manning authored
Ensure an unbound datagram skt is chosen when not in a VRF. The check for a device match in compute_score() for UDP must be performed when there is no device match. For this, a failure is returned when there is no device match. This ensures that bound sockets are never selected, even if there is no unbound socket. Allow IPv6 packets to be sent over a datagram skt bound to a VRF. These packets are currently blocked, as flowi6_oif was set to that of the master vrf device, and the ipi6_ifindex is that of the slave device. Allow these packets to be sent by checking the device with ipi6_ifindex has the same L3 scope as that of the bound device of the skt, which is the master vrf device. Note that this check always succeeds if the skt is unbound. Even though the right datagram skt is now selected by compute_score(), a different skt is being returned that is bound to the wrong vrf. The difference between these and stream sockets is the handling of the skt option for SO_REUSEPORT. While the handling when adding a skt for reuse correctly checks that the bound device of the skt is a match, the skts in the hashslot are already incorrect. So for the same hash, a skt for the wrong vrf may be selected for the required port. The root cause is that the skt is immediately placed into a slot when it is created, but when the skt is then bound using SO_BINDTODEVICE, it remains in the same slot. The solution is to move the skt to the correct slot by forcing a rehash. Signed-off-by:
-
Mike Manning authored
The commit a04a480d ("net: Require exact match for TCP socket lookups if dif is l3mdev") only ensures that the correct socket is selected for packets in a VRF. However, there is no guarantee that the unbound socket will be selected for packets when not in a VRF. By checking for a device match in compute_score() also for the case when there is no bound device and attaching a score to this, the unbound socket is selected. And if a failure is returned when there is no device match, this ensures that bound sockets are never selected, even if there is no unbound socket. Signed-off-by:
-
Robert Shearman authored
Change the inet socket lookup to avoid packets arriving on a device enslaved to an l3mdev from matching unbound sockets by removing the wildcard for non sk_bound_dev_if and instead relying on check against the secondary device index, which will be 0 when the input device is not enslaved to an l3mdev and so match against an unbound socket and not match when the input device is enslaved. Change the socket binding to take the l3mdev into account to allow an unbound socket to not conflict sockets bound to an l3mdev given the datapath isolation now guaranteed. Signed-off-by:
Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by:
-
- 07 Nov, 2018 5 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c: In function 'hclge_log_and_clear_ppp_error': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c:821:24: warning: variable 'reset_level' set but not used [-Wunused-but-set-variable] enum hnae3_reset_type reset_level = HNAE3_NONE_RESET; It never used since introduction in commit 01865a50 ("net: hns3: Add enable and process hw errors of TM scheduler") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: more set actions and notifier refactor This series brings updates to flower offload code. First Pieter adds support for setting TTL, ToS, Flow Label and Hop Limit fields in IPv4 and IPv6 headers. Remaining 5 patches deal with factoring out netdev notifiers from flower code. We already have two instances, and more is coming, so it's time to move to one central notifier which then feeds individual feature handlers. I start that part by cleaning up the existing notifiers. Next a central notifier is added, and used by flower offloads. ==================== Signed-off-by: -
Jakub Kicinski authored
Use driver's common notifier for LAG and tunnel configuration. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Code interested in networking events registers its own notifier handlers. Create one device-wide notifier instance. Signed-off-by:
-
Jakub Kicinski authored
nfp_fl_lag_changels_event() never fails, and therefore we would never return NOTIFY_BAD for NETDEV_CHANGELOWERSTATE. Make this clearer by changing nfp_fl_lag_changels_event()'s return type to void. Signed-off-by:
-
