The current sequence makes us register for a network device prior to
registering and probing the MDIO bus which could lead to some unwanted
consequences, like a thread of execution calling into ndo_open before
register_netdev() returns, while the MDIO bus is not ready yet.

Rework the sequence to register for the MDIO bus, and therefore attach
to a PHY prior to calling register_netdev(), which implies reworking the
error path a bit.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
RDS: TCP: sychronization during connection startup

This patch series ensures that the passive (accept) side of the
TCP connection used for RDS-TCP is correctly synchronized with
any concurrent active (connect) attempts for a given pair of peers.

Patch 1 in the series makes sure that the t_sock in struct
rds_tcp_connection is only reset after any threads in rds_tcp_xmit
have completed (otherwise a null-ptr deref may be encountered).
Patch 2 synchronizes rds_tcp_accept_one() with the rds_tcp*connect()
path.

v2: review comments from Santosh Shilimkar, other spelling corrections
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

An arbitration scheme for duelling SYNs is implemented as part of
commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
outgoing socket in rds_tcp_accept_one()") which ensures that both nodes
involved will arrive at the same arbitration decision. However, this
needs to be synchronized with an outgoing SYN to be generated by
rds_tcp_conn_connect(). This commit achieves the synchronization
through the t_conn_lock mutex in struct rds_tcp_connection.

The rds_conn_state is checked in rds_tcp_conn_connect() after acquiring
the t_conn_lock mutex.  A SYN is sent out only if the RDS connection is
not already UP (an UP would indicate that rds_tcp_accept_one() has
completed 3WH, so no SYN needs to be generated).

Similarly, the rds_conn_state is checked in rds_tcp_accept_one() after
acquiring the t_conn_lock mutex. The only acceptable states (to
allow continuation of the arbitration logic) are UP (i.e., outgoing SYN
was SYN-ACKed by peer after it sent us the SYN) or CONNECTING (we sent
outgoing SYN before we saw incoming SYN).
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a race condition between rds_send_xmit -> rds_tcp_xmit
and the code that deals with resolution of duelling syns added
by commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
outgoing socket in rds_tcp_accept_one()").

Specifically, we may end up derefencing a null pointer in rds_send_xmit
if we have the interleaving sequence:
           rds_tcp_accept_one                  rds_send_xmit

                                             conn is RDS_CONN_UP, so
    					 invoke rds_tcp_xmit

                                             tc = conn->c_transport_data
        rds_tcp_restore_callbacks
            /* reset t_sock */
    					 null ptr deref from tc->t_sock

The race condition can be avoided without adding the overhead of
additional locking in the xmit path: have rds_tcp_accept_one wait
for rds_tcp_xmit threads to complete before resetting callbacks.
The synchronization can be done in the same manner as rds_conn_shutdown().
First set the rds_conn_state to something other than RDS_CONN_UP
(so that new threads cannot get into rds_tcp_xmit()), then wait for
RDS_IN_XMIT to be cleared in the conn->c_flags indicating that any
threads in rds_tcp_xmit are done.

Fixes: 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an
outgoing socket in rds_tcp_accept_one()")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Fixes for tunnel checksum and segmentation offloads

This patch series is a subset of patches I had submitted for net-next.  I
plan to drop these two patches from the v3 of "Fix Tunnel features and
enable GSO partial for several drivers" and I am instead submitting them
for net since these are truly fixes and likely will need to be backported
to stable branches.

This series addresses 2 specific issues.  The first is that we could
request TSO on a v4 inner header while not supporting checksum offload of
the outer IPv6 header.  The second is that we could request an IPv6 inner
checksum offload without validating that we could actually support an inner
IPv6 checksum offload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to perform an additional check on the inner headers to determine if
we can offload the checksum for them.  Previously this check didn't occur
so we would generate an invalid frame in the case of an IPv6 header
encapsulated inside of an IPv4 tunnel.  To fix this I added a secondary
check to vxlan_features_check so that we can verify that we can offload the
inner checksum.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of the mlx4 and mlx5 driver they do not support IPv6 checksum
offload for tunnels.  With this being the case we should disable GSO in
addition to the checksum offload features when we find that a device cannot
perform a checksum on a given packet type.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 3b9d6da6 ("cpu/hotplug: Fix rollback during error-out
in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and
CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP
function calls are no longer required.

Replace smp_call_function_single() with a direct call to
mvneta_percpu_enable() or mvneta_percpu_disable(). The functions do
not require to be called with interrupts disabled, therefore the
smp_call_function_single() calling convention is not preserved.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now mdiobus_scan() returns ERR_PTR(-ENODEV) instead of NULL if the PHY
device ID was read as all ones. As this was not  an error before, this
value  should be filtered out now in this driver.

Fixes: b74766a0 ("phylib: don't return NULL from get_phy_device()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mdiobus_scan() returns either an error code or NULL on error, the
driver should check  for both,  not only for NULL, otherwise a crash is
imminent...
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G mlx5 fixes for 4.6-rc

This small series provides some bug fixes for mlx5 driver.

A small bug fix for iounmap of a null pointer, which dumps a warning on some archs.

One patch to fix the VXLAN/MLX5_EN dependency issue reported by Arnd.

Two patches to fix the scheduling while atomic issue for ndo_add/del_vxlan_port
NDOs.  The first will add an internal mlx5e workqueue and the second will
delegate vxlan ports add/del requests to that workqueue.

Note: ('net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue') is only needed for net
and not net-next as the issue was globally fixed for all device drivers by:
b7aade15 ('vxlan: break dependency with netdev drivers') in net-next.

Applied on top: f27337e1 ('ip_tunnel: fix preempt warning in ip tunnel creation/updating')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The vxlan add/delete port NDOs are called under rcu lock.
The current mlx5e implementation can potentially block in these
calls, which is not allowed.  Move to using the mlx5e workqueue
to handle these NDOs.

Fixes: b3f63c3d ('net/mlx5e: Add netdev support for VXLAN tunneling')
Signed-off-by: Matthew Finlay <matt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a mlx5e workqueue to handle all mlx5e specific tasks.  Move
all tasks currently using the system workqueue to the new workqueue.
This is in preparation for vxlan using the mlx5e workqueue in order to
schedule port add/remove operations.
Signed-off-by: Matthew Finlay <matt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When MLX5_EN=y MLX5_CORE=y and VXLAN=m there is a linker error for
vxlan_get_rx_port() due to the fact that VXLAN is a module. Change Kconfig
to select VXLAN when MLX5_CORE=y. When MLX5_CORE=m there is no dependency
on the value of VXLAN.

Fixes: b3f63c3d ('net/mlx5e: Add netdev support for VXLAN tunneling')
Signed-off-by: Matthew Finlay <matt@mellanox.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When freeing UAR the driver tries to unmap uar->map and uar->bf_map
which are mutually exclusive thus always unmapping a NULL pointer.
Make sure we only call iounmap() once, for the actual mapping.

Fixes: 0ba42241 ('net/mlx5: Fix global UAR mapping')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reported-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This was recently reported to me, and reproduced on the latest net kernel,
when attempting to run netperf from a host that had a netem qdisc attached
to the egress interface:

[  788.073771] ---------------------[ cut here ]---------------------------
[  788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda()
[  788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962
data_len=0 gso_size=1448 gso_type=1 ip_summed=3
[  788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif
ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul
glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si
i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter
pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c
sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt
i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci
crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp
serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log
dm_mod
[  788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G        W
------------   3.10.0-327.el7.x86_64 #1
[  788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012
[  788.542260]  ffff880437c036b8 f7afc56532a53db9 ffff880437c03670
ffffffff816351f1
[  788.576332]  ffff880437c036a8 ffffffff8107b200 ffff880633e74200
ffff880231674000
[  788.611943]  0000000000000001 0000000000000003 0000000000000000
ffff880437c03710
[  788.647241] Call Trace:
[  788.658817]  <IRQ>  [<ffffffff816351f1>] dump_stack+0x19/0x1b
[  788.686193]  [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0
[  788.713803]  [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80
[  788.741314]  [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100
[  788.767018]  [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda
[  788.796117]  [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190
[  788.823392]  [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem]
[  788.854487]  [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570
[  788.880870]  [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0
...

The problem occurs because netem is not prepared to handle GSO packets (as it
uses skb_checksum_help in its enqueue path, which cannot manipulate these
frames).

The solution I think is to simply segment the skb in a simmilar fashion to the
way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes.
When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt
the first segment, and enqueue the remaining ones.

tested successfully by myself on the latest net kernel, to which this applies
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netem@lists.linux-foundation.org
CC: eric.dumazet@gmail.com
CC: stephen@networkplumber.org
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
In this small batch of patches you have:
- a fix for our Distributed ARP Table that makes sure that the input
  provided to the hash function during a query is the same as the one
  provided during an insert (so to prevent false negatives), by Antonio
  Quartulli
- a fix for our new protocol implementation B.A.T.M.A.N. V that ensures
  that a hard interface is properly re-activated when it is brought down
  and then up again, by Antonio Quartulli
- two fixes respectively to the reference counting of the tt_local_entry
  and neigh_node objects, by Sven Eckelmann. Such bug is rather severe
  as it would prevent the netdev objects references by batman-adv from
  being released after shutdown.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull UDF fix from Jan Kara:
 "A fix of a regression in UDF that got introduced in 4.6-rc1 by one of
  the charset encoding fixes"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix conversion of 'dstring' fields to UTF8

Pull GPIO fixes from Linus Walleij:
 "Here are some late but important fixes for the v4.6 kernel series.
  ACPI and RCAR, so two driver fixes (PM related) and a self-evident
  string lookup fix for ACPI GPIOs:

   - A serious ACPI fix targeted for stable: lookup strings were being
     free'd.

   - Revert two patches from the RCAR driver"

* tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup list
  Revert "gpio: rcar: Fine-grained Runtime PM support"
  Revert "gpio: rcar: Add Runtime PM handling for interrupts"

Pull networking fixes from David Miller:

 1) MODULE_FIRMWARE firmware string not correct for iwlwifi 8000 chips,
    from Sara Sharon.

 2) Fix SKB size checks in batman-adv stack on receive, from Sven
    Eckelmann.

 3) Leak fix on mac80211 interface add error paths, from Johannes Berg.

 4) Cannot invoke napi_disable() with BH disabled in myri10ge driver,
    fix from Stanislaw Gruszka.

 5) Fix sign extension problem when computing feature masks in
    net_gso_ok(), from Marcelo Ricardo Leitner.

 6) lan78xx driver doesn't count packets and packet lengths in its
    statistics properly, fix from Woojung Huh.

 7) Fix the buffer allocation sizes in pegasus USB driver, from Petko
    Manolov.

 8) Fix refcount overflows in bpf, from Alexei Starovoitov.

 9) Unified dst cache handling introduced a preempt warning in
    ip_tunnel, fix by resetting rather then setting the cached route.
    From Paolo Abeni.

10) Listener hash collision test fix in soreuseport, from Craig Gallak

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  gre: do not pull header in ICMP error processing
  net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
  tipc: only process unicast on intended node
  cxgb3: fix out of bounds read
  net/smscx5xx: use the device tree for mac address
  soreuseport: Fix TCP listener hash collision
  net: l2tp: fix reversed udp6 checksum flags
  ip_tunnel: fix preempt warning in ip tunnel creation/updating
  samples/bpf: fix trace_output example
  bpf: fix check_map_func_compatibility logic
  bpf: fix refcnt overflow
  drivers: net: cpsw: use of_phy_connect() in fixed-link case
  dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
  drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
  drivers: net: cpsw: fix segfault in case of bad phy-handle
  drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver
  gre: reject GUE and FOU in collect metadata mode
  pegasus: fixes reported packet length
  pegasus: fixes URB buffer allocation size;
  ...

Pull sparc fixes from David Miller:

 1) Fix panics with SR-IOV, from Babu Moger.

 2) Wire up preadv2/pwritev2.

 3) Allow proper auto-loading of VIO devices, from John Paul Adrian
    Glaubitz.

 4) Recognize Sonoma cpus, from Khalid Aziz.

 5) Fix bootup regressions caused by syscall trace fixes made recently.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix bootup regressions on some Kconfig combinations.
  sparc64: recognize and support Sonoma CPU type
  sparc: Implement and wire up vio_hotplug for vio.
  sparc: Implement and wire up modalias_show for vio.
  sparc/pci: Refactor dev_archdata initialization into pci_init_dev_archdata
  sparc/defconfigs: Remove CONFIG_IPV6_PRIVACY
  sparc: Write up preadv2/pwritev2 syscalls.
  sparc/PCI: Fix for panic while enabling SR-IOV

iptunnel_pull_header expects that IP header was already pulled; with this
expectation, it pulls the tunnel header. This is not true in gre_err.
Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points
to the IP header.

We cannot pull the tunnel header in this path. It's just a matter of not
calling iptunnel_pull_header - we don't need any of its effects.

Fixes: bda7bb46 ("gre: Allow multiple protocol listener for gre protocol.")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to commit d92cff89 ("net_dbg_ratelimited: turn into no-op
when !DEBUG") the implementation of net_dbg_ratelimited() was buggy
for both the DEBUG and CONFIG_DYNAMIC_DEBUG cases.

The bug was that net_ratelimit() was being called and, despite
returning true, nothing was being printed to the console. This
resulted in messages like the following -

"net_ratelimit: %d callbacks suppressed"

with no other output nearby.

After commit d92cff89 ("net_dbg_ratelimited: turn into no-op when
!DEBUG") the bug is fixed for the DEBUG case. However, there's no
output at all for CONFIG_DYNAMIC_DEBUG case.

This patch restores debug output (if enabled) for the
CONFIG_DYNAMIC_DEBUG case.

Add a definition of net_dbg_ratelimited() for the CONFIG_DYNAMIC_DEBUG
case. The implementation takes care to check that dynamic debugging is
enabled before calling net_ratelimit().

Fixes: d92cff89 ("net_dbg_ratelimited: turn into no-op when !DEBUG")
Signed-off-by: Tim Bingham <tbingham@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have observed complete lock up of broadcast-link transmission due to
unacknowledged packets never being removed from the 'transmq' queue. This
is traced to nodes having their ack field set beyond the sequence number
of packets that have actually been transmitted to them.
Consider an example where node 1 has sent 10 packets to node 2 on a
link and node 3 has sent 20 packets to node 2 on another link. We
see examples of an ack from node 2 destined for node 3 being treated as
an ack from node 2 at node 1. This leads to the ack on the node 1 to node
2 link being increased to 20 even though we have only sent 10 packets.
When node 1 does get around to sending further packets, none of the
packets with sequence numbers less than 21 are actually removed from the
transmq.
To resolve this we reinstate some code lost in commit d999297c ("tipc:
reduce locking scope during packet reception") which ensures that only
messages destined for the receiving node are processed by that node. This
prevents the sequence numbers from getting out of sync and resolves the
packet leakage, thereby resolving the broadcast-link transmission
lock-ups we observed.

While we are aware that this change only patches over a root problem that
we still haven't identified, this is a sanity test that it is always
legitimate to do. It will remain in the code even after we identify and
fix the real problem.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An out of bounds read of 2 bytes was discovered in cxgb3 with KASAN.

t3_config_rss() expects both arrays it gets as parameters to have
terminators. setup_rss(), the caller, forgets to add a terminator to
one of the arrays. Thankfully the iteration in t3_config_rss() stops
anyway, but in the last iteration the check for the terminator
is an out of bounds read.

Add the missing terminator to rspq_map[].
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This takes the MAC address for smsc75xx/smsc95xx USB network devices
from a the device tree. This is required to get a usable persistent
address on the popular beagleboard, whose hardware designers
accidentally forgot that an ethernet device really requires an a
MAC address to be functional.

The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores
the MAC address in ROM accessible via VC4 firmware.

The smsc75xx and smsc95xx drivers are just two copies of the
same code, so better fix both.

[lkundrak@v3.sk: updated to use of_get_property() as per suggestion from
Arnd, reworded the message and comments a bit]
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>

I forgot to include a check for listener port equality when deciding
if two sockets should belong to the same reuseport group.  This was
not caught previously because it's only necessary when two listening
sockets for the same user happen to hash to the same listener bucket.
The same error does not exist in the UDP path.

Fixes: c125e80b("soreuseport: fast reuseport TCP socket selection")
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bug which causes the behavior of whether to ignore
udp6 checksum of udp6 encapsulated l2tp tunnel contrary to what
userspace program requests.

When the flag `L2TP_ATTR_UDP_ZERO_CSUM6_RX` is set by userspace, it is
expected that udp6 checksums of received packets of the l2tp tunnel
to create should be ignored. In `l2tp_netlink.c`:
`l2tp_nl_cmd_tunnel_create()`, `cfg.udp6_zero_rx_checksums` is set
according to the flag, and then passed to `l2tp_core.c`:
`l2tp_tunnel_create()` and then `l2tp_tunnel_sock_create()`. In
`l2tp_tunnel_sock_create()`, `udp_conf.use_udp6_rx_checksums` is set
the same to `cfg.udp6_zero_rx_checksums`. However, if we want the
checksum to be ignored, `udp_conf.use_udp6_rx_checksums` should be set
to `false`, i.e. be set to the contrary. Similarly, the same should be
done to `udp_conf.use_udp6_tx_checksums`.
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull thermal fixes from Eduardo Valentin:
 "A couple of minor fixes for the thermal subsystem.

  Specifics in this pull request:

   - Fixes in hisilicon thermal driver
   - More fixes of unsigned to int type change in thermal_core.c"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: use %d to print S32 parameters
  thermal: hisilicon: increase temperature resolution

Calling gpiod_get() from a module and then unloading the module leads to an
oops due to acpi_can_fallback_to_crs() storing the pointer to the passed
'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then
try to access the string but the memory may now be gone with the module.
Make a copy of the passed string instead, and store the copy on the list.

BUG: unable to handle kernel paging request at ffffffffa03e7855
IP: [<ffffffff81338322>] strcmp+0x12/0x30
PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya
rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal
punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf
orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r
el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev
sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm]
CPU: 2 PID: 3064 Comm: modprobe Tainted: G     U  W       4.6.0-rc3-ffrd-ipvr+ #302
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8
_X64_R_2014_13_1_00 03/24/2014
task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000
RIP: 0010:[<ffffffff81338322>]  [<ffffffff81338322>] strcmp+0x12/0x30
RSP: 0000:ffff880070037748  EFLAGS: 00010286
RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856
RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855
R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea
FS:  00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0
Stack:
 ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000
 ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800
 00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170
Call Trace:
 [<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100
 [<ffffffff8136852e>] gpiod_get_index+0x25e/0x310
 [<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30
 [<ffffffff813685f2>] gpiod_get+0x12/0x20
 [<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915]
 [<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915]
 [<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915]
 [<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915]
 [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70
 [<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm]
 [<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm]
 [<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70
 [<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915]
 [<ffffffff81379751>] pci_device_probe+0x91/0x100
 [<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0
 [<ffffffff8141a8be>] __driver_attach+0x9e/0xb0
 [<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0
 [<ffffffff81418439>] bus_for_each_dev+0x69/0xa0
 [<ffffffff8141a04e>] driver_attach+0x1e/0x20
 [<ffffffff81419c20>] bus_add_driver+0x1c0/0x240
 [<ffffffff8141b6d0>] driver_register+0x60/0xe0
 [<ffffffff81377d20>] __pci_register_driver+0x60/0x70
 [<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm]
 [<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10
 [<ffffffffa02f1000>] ? 0xffffffffa02f1000
 [<ffffffffa02f1094>] i915_init+0x94/0x9b [i915]
 [<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0
 [<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90
 [<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270
 [<ffffffff81183826>] do_init_module+0x60/0x1dc
 [<ffffffff81115a8d>] load_module+0x1d0d/0x2390
 [<ffffffff811120b0>] ? __symbol_put+0x70/0x70
 [<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120
 [<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0
 [<ffffffff8111631e>] SyS_finit_module+0xe/0x10
 [<ffffffff81001ff3>] do_syscall_64+0x63/0x350
 [<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25
Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0
 74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66
RIP  [<ffffffff81338322>] strcmp+0x12/0x30
 RSP <ffff880070037748>
CR2: ffffffffa03e7855

v2: Make the copied con_id const

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 10cf4899 ("gpiolib: tighten up ACPI legacy gpio lookups")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull powerpc fixes from Michael Ellerman:
 "A few more powerpc fixes for 4.6:

   - cxl: Keep IRQ mappings on context teardown from Michael Neuling

   - cxl: Poll for outstanding IRQs when detaching a context from
     Michael Neuling

   - Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra"

* tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: wire up preadv2 and pwritev2 syscalls
  cxl: Poll for outstanding IRQs when detaching a context
  cxl: Keep IRQ mappings on context teardown

Pull EDAC fix from Borislav Petkov:
 "Make sure sb_edac and i7core_edac do not terminate MCE processing on
  the decoding callchain prematurely"

* tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback

Pull power management fixes from Rafael Wysocki:
 "One revert of a recent cpufreq commit that introduced a regression and
  a fix for intel_pstate's Turbo Activation Ratio handling code.

  Specifics:

   - Revert cpufreq commit that attempted to fix a problem in the
     ondemand/conservative governor code, but did that incorrectly and
     introduced another problem instead (Rafael Wysocki).

   - Fix incorrect decoding of MSR contents related to the Turbo
     Activation Ratio (TAR) handling in the intel_pstate driver
     (Srinivas Pandruvada)"

* tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix processing for turbo activation ratio
  Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"

Pull MMC fixes from Ulf Hansson:
 "Here are a two MMC host fixes:

  - sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs

  - sunxi: Disable eMMC HS-DDR for Allwinner A80"

* tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80
  mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs

Pull drm fixes from Dave Airlie:
 "A few fixes all over the place:

  radeon is probably the biggest standout, it's a fix for screen
  corruption or hung black outputs so I thought it was worth pulling in.

  Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one
  etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM
  fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix order of operation
  drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
  drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
  drm/amdgpu: disable vm interrupts with vm_fault_stop=2
  drm/amdgpu: print a message if ATPX dGPU power control is missing
  Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
  drm/radeon: fix vertical bars appear on monitor (v2)
  drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
  drm/virtio: send vblank event after crtc updates
  drm/dp/mst: Restore primary hub guid on resume
  drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
  drm/etnaviv: don't move linear memory window on 3D cores without MC2.0

Pull rdma fixes from Doug Ledford:
 "Final set of -rc fixes for 4.6.

  I've collected up a number of patches that are all pretty small with
  the exception of only a couple.  The hfi1 driver has a number of
  important patches, and it is what really drives the line count of this
  pull request up.  These are all small and I've got this kernel built
  and running in the test lab (I have most of the hardware, I think nes
  is the only thing in this patch set that I can't say I've personally
  tested and have up and running).

  Summary:

   - A number of collected fixes for oopses, memory corruptions,
     deadlocks, etc.  All of these fixes are small (many only 5-10
     lines), obvious, and tested.

   - Fix for the security issue related to the use of write for
     bi-directional communications"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA/nes: don't leak skb if carrier down
  IB/security: Restrict use of the write() interface
  IB/hfi1: Use kernel default llseek for ui device
  IB/hfi1: Don't attempt to free resources if initialization failed
  IB/hfi1: Fix missing lock/unlock in verbs drain callback
  IB/rdmavt: Fix send scheduling
  IB/hfi1: Prevent unpinning of wrong pages
  IB/hfi1: Fix deadlock caused by locking with wrong scope
  IB/hfi1: Prevent NULL pointer deferences in caching code
  MAINTAINERS: Update iser/isert maintainer contact info
  IB/mlx5: Expose correct max_sge_rd limit
  RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
  iw_cxgb4: handle draining an idle qp
  iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping
  iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping
  IB/core: Don't drain non-existent rq queue-pair
  IB/core: Fix oops in ib_cache_gid_set_default_gid

Merge fixes from Andrew Morton:
 "20 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  Documentation/sysctl/vm.txt: update numa_zonelist_order description
  lib/stackdepot.c: allow the stack trace hash to be zero
  rapidio: fix potential NULL pointer dereference
  mm/memory-failure: fix race with compound page split/merge
  ocfs2/dlm: return zero if deref_done message is successfully handled
  Ananth has moved
  kcov: don't profile branches in kcov
  kcov: don't trace the code coverage code
  mm: wake kcompactd before kswapd's short sleep
  .mailmap: add Frank Rowand
  mm/hwpoison: fix wrong num_poisoned_pages accounting
  mm: call swap_slot_free_notify() with page lock held
  mm: vmscan: reclaim highmem zone if buffer_heads is over limit
  numa: fix /proc/<pid>/numa_maps for THP
  mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
  mailmap: fix Krzysztof Kozlowski's misspelled name
  thp: keep huge zero page pinned until tlb flush
  mm: exclude HugeTLB pages from THP page_mapped() logic
  kexec: export OFFSET(page.compound_head) to find out compound tail page
  kexec: update VMCOREINFO for compound_order/dtor

After the commit e09acddf ("ip_tunnel: replace dst_cache with generic
implementation"), a preemption debug warning is triggered on ip4
tunnels updating; the dst cache helper needs to be invoked in unpreemptible
context.

We don't need to load the cache on tunnel update, so this commit fixes
the warning replacing the load with a dst cache reset, which is
preempt safe.

Fixes: e09acddf ("ip_tunnel: replace dst_cache with generic implementation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both of these drivers can return NOTIFY_BAD, but this terminates
processing other callbacks that were registered later on the chain.
Since the driver did nothing to log the error it seems wrong to prevent
other interested parties from seeing it. E.g. neither of them had even
bothered to check the type of the error to see if it was a memory error
before the return NOTIFY_BAD.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.comSigned-off-by: Borislav Petkov <bp@suse.de>